Soils of the world are classified into 11 orders. The orders are based on soil characteristics.
(1) The Carolinas (North and South) are dominated by ____ order. List the characteristics of this soil order. soil
(2) List the soil orders that dominate the Australian continent.

Answers

Answer 1

Major soil orders in Australia include Vertisols, Alfisols, Mollisols, Aridisols, Entisols, Inceptisols, Andisols, Gelisols, Histosols, Spodosols, and Ultisols.

(1) The Carolinas (North and South) are dominated by the Ultisols order. Ultisols are characterized by their strong acidity and low fertility due to the leaching of basic cations such as calcium, magnesium, and potassium. They are often found in humid regions with high rainfall and are typically derived from older, highly weathered parent materials such as granite or gneiss. Ultisols have a clay-rich subsoil layer called the argillic horizon, which is typically red or yellow in color due to the presence of iron oxides. This horizon can be quite thick, up to several meters deep in some cases. Ultisols are not well-suited for agriculture due to their low fertility and high acidity, but they are often used for forestry or grazing.

(2) The Australian continent is dominated by a number of different soil orders, reflecting the continent's diverse geology, climate, and vegetation.

Some of the major soil orders found in Australia include:

Vertisols: These are heavy clay soils that shrink and swell significantly with changes in moisture content, often forming deep cracks when dry. They are found in areas with a pronounced dry season and high temperatures, and are often used for grazing or dryland agriculture.Alfisols: These are moderately weathered soils with a clay-rich subsoil that is moderately fertile. They are often found in areas with a Mediterranean climate, and are well-suited for agriculture.Mollisols: These are deep, fertile soils with a high organic matter content, often found in grassland ecosystems. They are well-suited for agriculture and are used extensively for grazing and crop production.Aridisols: These are desert soils with low organic matter content and low fertility. They are found in arid and semiarid regions and are typically used for grazing.Entisols: These are young, poorly developed soils that lack a distinct subsoil horizon. They are found in a variety of environments and are often used for forestry or range management.Inceptisols: These are moderately developed soils with a weakly developed subsoil horizon. They are found in a variety of environments and are often used for forestry, grazing, or dryland agriculture.

Other soil orders found in Australia include Andisols, Gelisols, Histosols, Spodosols, and Ultisols. Each of these soil orders has its own unique characteristics and distribution patterns, reflecting the complex interplay of geology, climate, and vegetation across the Australian continent.

Learn more about  Mediterranean climate here:

https://brainly.com/question/9231311

#SPJ11


Related Questions

a porphyritic igneous texture indicates that:
a. there was water in the magma
b. the rock cooled slowly and then quickly
c. the rock broke apart as it flowed
d. the rock cooled slowly
e. the ash and pumice were hot and became compacted

Answers

A porphyritic igneous texture indicates that the rock cooled slowly and then quickly.

Porphyritic texture is a common texture in igneous rocks, which are formed from the solidification of magma or lava. The texture is characterized by large, well-formed crystals (phenocrysts) surrounded by finer-grained matrix (groundmass).

The presence of two distinct grain sizes in the same rock indicates that the rock underwent two different cooling rates. The large crystals (phenocrysts) formed during slow cooling of the magma, usually deep below the Earth's surface, while the smaller crystals (groundmass) formed during the faster cooling of the magma or lava as it reached the surface or was exposed to the atmosphere.

Porphyritic textures can be found in a variety of igneous rocks, including granites, basalts, andesites, and rhyolites. The texture provides important clues about the cooling history and conditions of the magma or lava, which can be used to infer information about the geological processes that formed the rock.

Learn more about geological here:

https://brainly.com/question/5634603

#SPJ11

which of the following is not correct for walker circulation?a.there is rising air over the western pacific ocean.b.there is convection over the western equatorial pacific.c.there is cold water over the western pacific ocean.d.there is descending air over the eastern equatorial pacific.

Answers

Answer:

*option d*

Explanation:

In walker circulation, winds are seem to be blowing over the cooler areas of the eastern equatorial Pacific

Are volcanoes in the Ring of Fire generally described as effusive or explosive? Provide an example

Answers

Volcanoes in the Ring of Fire are generally described as explosive because they tend to have high viscosity magma, which can trap gases and build up pressure until it explodes violently. An example of an explosive volcano in the Ring of Fire is Mount St. Helens, located in Washington State, USA.

Due to their propensity for having highly viscous lava, which has the ability to trap gases and increase pressure until it erupts violently, volcanoes in the Ring of Fire are frequently referred to as explosive.

The violent eruptions of the Ring of Fire have the potential to launch ash, volcanic bombs, and gases high into the atmosphere, seriously harming adjacent settlements.

Mount St. Helens, which lies in the United States' Washington State, is an illustration of an explosive volcano in the Ring of Fire. In 1980, it erupted ferociously, creating a huge ash cloud that rose over 80,000 feet and scattering volcanic material across the surrounding area.

Over a billion dollars worth of damage and 57 lives lost as a result of the eruption.

For such more question on Volcanoes:

https://brainly.com/question/440765

#SPJ11

Identify outcomes of metamorphic change. Choose one or more
A.growth of new minerals
B.changes in mineral size and shape
C.creation of foliation
D.phase change of minerals

Answers

growth of new minerals, changes in mineral size and shape ,creation of foliation ,phase change of minerals. All options are correct.

All of the listed outcomes can result from metamorphic change. Metamorphism is the process by which rocks are changed by heat, pressure, and/or chemical reactions, and this process can result in a variety of changes to the rock's mineralogy, texture, and structure. One common outcome of metamorphism is the growth of new minerals. This can occur when existing minerals in the rock recrystallize or when new minerals form as a result of chemical reactions between the rock and fluids that have infiltrated it.

Another outcome of metamorphism is changes in mineral size and shape. This can occur as a result of recrystallization or reorientation of mineral grains in response to the applied stresses of metamorphism. Foliation is a type of texture that develops in some metamorphic rocks as a result of the preferred orientation of mineral grains. This can occur when a rock is subjected to directional stress, which causes the mineral grains to align and form a planar fabric or "foliation". Finally, metamorphism can also result in phase changes of minerals, meaning that the mineral undergoes a transformation from one crystal structure to another. This can occur as a result of changes in temperature, pressure, or the presence of fluids that alter the chemical environment of the rock.

Learn more about mineral here:

https://brainly.com/question/18078524

#SPJ11

What patterns of climate change have scientists observed in the past?

Answers

Scientists observed climate change includes surface warming, changes in the atmosphere's temperature, rises in ocean heat content, rises in atmospheric moisture, sea level rise, and increasing melting of land and sea ice.

Since the late 19th century, the average surface temperature of the earth has grown by around 2 degrees Fahrenheit (1 degrees Celsius). This change is primarily attributable to rising atmospheric carbon dioxide emissions and other human activities.

The rate of glacier retreat throughout the globe, the intensity of rainfall events, variations in the timing of plant leafing out and the migration of migrant birds in the spring, and the shifting of some species' ranges are only a few of the physical and biological changes that confirm climate warming.

Learn more about climate change:

https://brainly.com/question/28779953

#SPJ4

All of the following ideas were included in Christian teachings except __________. A. Loving one’s enemies B. Obeying the Ten Commandments C. Being thankful for one’s possessions D. Believing in the Father, Son, and Holy Spirit

Answers

All of the following ideas were included in Christian teachings except Being thankful for one’s possessions.

C is the correct answer.

Christians rely on the teachings, life, and death of Jesus Christ as the foundation for their faith. Christians firmly believe that the universe, earth, and heaven were all created by one God. Jewish religious thought is where the idea of a single God first emerged. As the "Messiah" or world's savior, Christians view Jesus as such.

The central tenet of Christianity is that sinful people can be made right with God by accepting and believing in the death and resurrection of Jesus. In doing so, they are given redemption and the possibility of experiencing eternal life.

Learn more about Christian teachings:

https://brainly.com/question/25540552

#SPJ4

(T/F) Earthquake induced forces is an example of gravity loading on a structure.

Answers

False, earthquake-induced forces are not an example of gravity loading on a structure. They are instead considered lateral or horizontal forces, also known as seismic loading, which act on the structure during an earthquake. Gravity loading refers to the vertical forces acting on a structure due to its own weight and the weight of its contents.

Gravity loading refers to the weight of the structure and any other loads that are caused by the force of gravity, such as the weight of people or objects inside the building. Earthquake-induced forces, on the other hand, are caused by the shaking and movement of the ground during an earthquake and are classified as lateral loads. These forces can cause significant damage to a structure, particularly if it is not designed to withstand them.

Learn more about force of gravity: https://brainly.com/question/14874038

#SPJ11

How many people are in the earth?

Answers

Answer:

8 Billion People

Explanation:

As of 2022, the estimated global population is approximately 7.9 billion people. This is a significant increase from just 100 years ago, when the world population was estimated to be around 1.8 billion people.

The global population has been steadily increasing over time due to a combination of factors, including advances in healthcare and medicine, improved living conditions, and changes in cultural and societal norms.

It's important to note that population estimates are not exact, as there is always some level of uncertainty and variation in the data. The UN's population estimates are based on number of assumptions and projections about future trends in fertility and migration, other factors.

To know more about population visit:

brainly.com/question/27991860

The most significant global consequence of ash and aerosol in the atmosphere is
A. global cooling via atmospheric haze.
B. global warming via greenhouse gases.
C. global crop failure via ash fallout.

Answers

Global cooling via atmospheric haze is the most significant global consequence of ash and aerosol in the atmosphere. Option A is correct.

When volcanic eruptions occur, they release large amounts of ash and aerosols into the atmosphere. These particles can remain in the atmosphere for an extended period of time and can have significant global consequences. The ash and aerosols can block incoming solar radiation, causing a cooling effect on the Earth's surface. This cooling effect can be significant enough to cause a decline in global temperatures for several years following a large volcanic eruption.

The cooling effect is caused by the particles in the atmosphere reflecting and absorbing sunlight, which reduces the amount of solar radiation that reaches the Earth's surface. The result is a decrease in global temperatures and a cooling of the climate. While volcanic eruptions can cause local crop failures due to ash fallout, this is not typically a significant global consequence. Similarly, while greenhouse gases can contribute to global warming, volcanic ash and aerosols do not contribute to this effect. Instead, they have the opposite effect, causing global cooling via atmospheric haze

Learn more about atmosphere here:

https://brainly.com/question/26767532

#SPJ11

what are the basic requirements for a terrestrial world to have a global magnetic field? what are the basic requirements for a terrestrial world to have a global magnetic field? a core that has a molten layer and a mantle that has convection

Answers

The basic requirements for a terrestrial world to have a global magnetic field are: A molten core, Convection in the mantle and A rotation.

A terrestrial globe must meet the following prerequisites in order to have a worldwide magnetic field:

The planet must have a metallic core that is molten and capable of producing electric currents. These electric currents' motion can create a magnetic field.Convection in the mantle: Convection, or the transfer of heat by the movement of material, is a necessary component of the planet's mantle. The magnetic field produced by the core can be maintained in part by the convection in the mantle.The planet must revolve around its axis. A stable global magnetic field can be created by the rotation by organising the magnetic field lines produced by the core.

There may not be a global magnetic field on the planet if any of these conditions are not satisfied.

For such more question on magnetic:

https://brainly.com/question/30898946

#SPJ11

What are slickensides?
A)Fractures made in a rock as a result of tensional stress
B)Joints made as an igneous rock cools and contracts
C)Polished and striated surfaces made on fault blocks
D)Folded rocks along a convergent boundary

Answers

C) Slickensides are polished and striated surfaces made on fault blocks. They are formed due to the movement of rocks along a fault plane, which causes frictional forces between the two sides of the fault.

The frictional forces cause the polished and grooved surfaces of the fault block, with the direction of the grooves indicating the direction of movement along the fault. Slickensides are important in the study of faults and tectonic plates. By examining the orientation and characteristics of slickensides, geologists can determine the type and intensity of forces that caused the faulting, which can help in understanding the overall tectonic history of a region.

Learn more about frictional forces here:

https://brainly.com/question/30280752

#SPJ11

The earthquakes occurred in 1857, 1881, 1901, 1922, 1934, and 1966.What is the recurrence interval for the section of the San Andreas fault that runs through Parkfield?
A.109 years
B.21.8 years
C. -24 years
D. 32 years

Answers

The correct option is B. The recurrence interval for the Parkfield section of the San Andreas Fault is approximately 21.8 years.

The Parkfield section of the San Andreas Fault is known for having regular earthquakes, and several large earthquakes have occurred in this region in the past. To calculate the recurrence interval for earthquakes in this section of the fault, we can use the following formula:

Recurrence interval = (time elapsed between first and last earthquake) / (number of earthquakes - 1)

Using the dates provided, we can calculate the time elapsed between the first and last earthquakes in the sequence:

Last earthquake (1966) - First earthquake (1857) = 109 years

There are a total of 6 earthquakes listed, so we need to subtract 1 from this number to get the correct denominator for the formula. Therefore:

Recurrence interval = 109 / (6-1) = 21.8 years

However, it's important to note that this is an average value, and earthquakes may not always occur with this regularity.

Learn more about earthquakes here:

https://brainly.com/question/9415516

#SPJ11

How does DNA analysis tie human evolution to the Toba eruption that occurred 74,000 years ago?

Answers

The Toba eruption has been linked to a genetic bottleneck in human evolution about 70,000 years ago; it is hypothesized that the eruption resulted in a severe reduction in the size of the total human population due to the effects of the eruption on the global climate.

One major hazard in the area surrounding Mount Rainier is the risk of future deposition of ______, which may occur in the path of previous deposits that are rapidly being developed.

Answers

One major hazard in the area surrounding Mount Rainier is the risk of future deposition of volcanic ash, which may occur in the path of previous deposits that are rapidly being developed. The volcano has a long history of explosive eruptions that have resulted in the formation of large ash deposits.

These deposits can pose a significant threat to human life, infrastructure, and the environment, as they can cause respiratory problems, damage buildings and roads, and disrupt ecosystems.The rapid development of the region surrounding Mount Rainier increases the potential for exposure to volcanic hazards. As more people move into the area, more infrastructure is built, and more land is developed, the risk of being impacted by volcanic ash increases. This is because the deposition of ash can result in disruptions to transportation, communication, and other critical infrastructure, which can have far-reaching economic and social consequences.To mitigate the risks associated with future deposition of volcanic ash, it is essential to have effective hazard management strategies in place. This includes monitoring the volcano, conducting regular risk assessments, developing emergency plans, and communicating hazards and risks to the public. By taking these steps, we can reduce the impact of future volcanic eruptions and ensure that communities in the area surrounding Mount Rainier are prepared for any potential hazards.

Learn more about future here

https://brainly.com/question/27979326

#SPJ11

Identify the list of rock types that is ordered by increasing degrees of metamorphism (i.e., from lower to higher grade).
A. shale, migmatite, schist, phyllite
B. slate, phyllite, schist, gneiss
C. schist, slate, phyllite, migmatite
D. gneiss, phyllite, schist, slate

Answers

The correct list of rock types ordered by increasing degrees of metamorphism (from lower to higher grade) is: B. slate, phyllite, schist, gneiss

This order represents the progressive transformation of rocks through metamorphism, with increasing temperature and pressure. Slate is a low-grade metamorphic rock formed from shale or mudstone. Phyllite forms at slightly higher metamorphic conditions, with more pronounced foliation and sheen from microscopic mica crystals. Schist, a medium-grade metamorphic rock, forms at even higher temperatures and pressures, characterized by larger mica and other mineral crystals. Gneiss, a high-grade metamorphic rock, forms under the highest metamorphic conditions, displaying distinct banding of light and dark minerals due to strong compression and high temperatures.

Learn more about rock here:

https://brainly.com/question/19930528

#SPJ11

Please Answer This! HURRY! 50 points answer before it gets buried!
Human Geo Chapter 6


True or False: The distribution of ethnicities in the United States varies depending upon religion, culture, and race.


True or False: Ethnicities can be clustered in cities or in particular neighborhoods within a city.


True or False: One of the most powerful forces with regard to the location of a group is the group members’ ability to pay for the space they are occupying.


True or False: Geography of gender does not just refer to biology. Rather, it is related to the social situation of individuals.

Answers

Answer: All of these questions are true.

1. True

2. True

3. False- There are more important things such as if the place/location is safe

4. False- Gender is related to Biology

xx chromosome- female

xy- male

Lava flows are rarely responsible for many volcano-related deaths because they ______.

Answers

Lava flows are rarely responsible for many volcano-related deaths because they typically move at a slow pace, allowing people to evacuate in time.

Volcanoes produce lava, a molten rock that flows out of the volcanic vent. As lava travels along the surface, it can create hazards such as property damage and wildfires. However, due to its viscous nature, lava generally advances at a slow speed, ranging from a few meters per hour to tens of meters per hour. This slow progress gives authorities ample time to warn residents in the affected areas and initiate evacuation procedures. Consequently, the number of fatalities directly caused by lava flows is relatively low when compared to other volcanic phenomena such as pyroclastic flows, lahars, or volcanic gas emissions. Pyroclastic flows, for example, are fast-moving, hot mixtures of gas and volcanic material that can be lethal and cause a higher number of casualties. In summary, while lava flows pose a threat to property and the environment, their slow-moving nature usually allows for effective evacuations, leading to a lower number of volcano-related deaths. It is essential for communities living near volcanoes to have well-prepared evacuation plans and follow local authorities' guidance to minimize the risks associated with volcanic eruptions.

Learn more about Lava here

https://brainly.com/question/29623706

#SPJ11

Describe ONE way in which primate cities are important within their countries

Answers

Primate cities are important within their communities because they are the centers of trade, industry and economic activity. People move to the city in pursuit of work and opportunity, acting as a node for urbanization.

A primate city is the biggest city in a nation or region, and it is also the most important and prominent city in the area. Primate cities frequently act as the social, cultural, and political hub of their communities and can have a significant impact on the rest of the nation.

A primate city will typically take the lead in all other facets of a nation's society, including economy, politics, culture, and education, in addition to size and population. The majority of internal migration in a nation or region likewise has its sights set on primitive cities.

Learn more about Primate city:

https://brainly.com/question/18014194

#SPJ4

an occultation occurs when select an answer and submit. for keyboard navigation, use the up/down arrow keys to select an answer. a a star passes between earth and a planet b a planet passes between earth and the sun c a planet passes between the earth and a distant star d earth passes between the sun and a planet e a star passes between earth and the sun

Answers

An occultation occurs when a celestial object passes in front of another celestial object, as observed from a particular location. The correct option for the given question is: E. A star passes between Earth and the Sun.

An occultation is an astronomical event that occurs when one celestial body is obscured by another, as seen from the observer's perspective. This can happen in different ways, depending on the positions of the objects involved.For example, a planet can pass between Earth and the Sun, causing a solar occultation or transit. Similarly, a planet can be occulted by the Moon, as seen from Earth. In some cases, a star can pass behind a planet or a moon, causing a stellar occultation. This type of event is often used by astronomers to study the properties of the objects involved, such as their size, shape, and composition.

Learn more about location here:https://brainly.com/question/11718756

#SPJ11

The 1991 Mount Pinatubo eruption featured massive _____ that were produced when Typhoon Yunya passed over the volcano, dumping heavy rainfall.

Answers

The 1991 Mount Pinatubo eruption featured massive lahars that were produced when Typhoon Yunya passed over the volcano, dumping heavy rainfall.

Lahars are a type of volcanic mudflow that can occur when heavy rainfall mixes with ash and other volcanic debris on the slopes of a volcano. During the Mount Pinatubo eruption, lahars were particularly devastating as they caused extensive damage to infrastructure and agriculture in surrounding areas, and also led to loss of life. In fact, lahars were responsible for the majority of the damage and fatalities caused by the eruption, highlighting their destructive power. The lahars from the Mount Pinatubo eruption were able to travel long distances and even made it to the ocean, which caused further problems such as fish kills and coastal erosion. Overall, the combination of the eruption and typhoon created a deadly mix of natural hazards that affected the Philippines and the surrounding region for years to come.

Know more about Mount Pinatubo here:

https://brainly.com/question/30448014

#SPJ11

Small particles in the atmosphere including dust, salt, sulfate, or nitrate particles present surfaces for condensation to cling and are known as particulates in the atmosphere, so when the particulates become surfaces of condensation, they are called condensation __________.

Answers

Small particles in the atmosphere, such as dust, salt, sulfate, or nitrate particles, that serve as surfaces for water vapor to condense onto are known as condensation nuclei.

Small particles in the atmosphere are commonly referred to as particulate matter (PM) or aerosols. These particles can be natural or anthropogenic (man-made) and can come in various sizes and shapes, ranging from nanometers to micrometers. Some common sources of particulate matter include dust, wildfires, industrial processes, and transportation.When particulate matter provides a surface for water vapor to condense onto, it can form clouds or fog. This process is called condensation nucleation. The particulate matter, or aerosol particles, act as cloud condensation nuclei (CCN), which help to initiate the formation of cloud droplets. Without these CCN, the water vapor in the atmosphere would need to be at a much higher concentration before it could begin to condense into clouds.

Learn more about nuclei here:https://brainly.com/question/21796566

#SPJ11

Do you believe that citizens of tropical countries have the right to deforest the most biologically diverse communities on earth

Answers

I dont think the citizens of tropical countries have the right to deforest the most biologically diverse communities on earth

How does this impact communities?

The deliberation whether citizens of tropical countries have the right to destroy one of earth's richest biological environments is a multifaceted matter that necessitates knowledge of environmental, economic, social, and legal variables.

From an ecological standpoint, deforestation can generate dire consequences, including diminishing biodiversity, soil erosion, and alteration of global climate. Tropical forests boast a crucial role in moderating the Earth's temperatures by absorbing carbon dioxide via photosynthesis.

In terms of societal considerations, numerous indigenous populations inhabit and depend on these woods for their subsistence as well as cultural customs. Deforestation could displace these people, jeopardize their daily activities, and give rise to disagreements among societies.

From an monetary outlook, deforestation might grant temporary benefits such as timber or land for crop cultivation, but it can also breed long-term harmfulness like degraded water supremacy, amplified flooding, and lessened agricultural yield.

Read more on deforestation here:https://brainly.com/question/1478703

#SPJ1

DISCUSS RURAL-URBAN-MIGRATION UNDER THE FOLLOWING HEADINGS: 1.1 What is rural-urban migration? (introduction)
1.2 Causes of rural-urban migration.
1.3 Problems associated with rural-urban migration in rural areas,
1.4 Challenges in urban areas due to the process of rural-urban migration.
1.5 What should be done in rural areas (strategies) to reduce this process.
1.6 Conclusion.​

Answers

Answer:

1.1 the movement of people from rural to urban areas

1.2 employment, education, or better standard of living

1.3 when cities cannot keep up with their population growth , a rapid deterioration of the rural economy leading to chronic poverty and food insecurity

1.4 not getting what you want(food/clothes) poor education,

Undersea volcanic eruptions are one culprit in the formation of _______, which are the second most deadly volcanic process.

Answers

Undersea volcanic eruptions are one culprit in the formation of tsunamis, which are the second most deadly volcanic process.

When a volcano erupts under the sea, it can cause a sudden displacement of water that results in a series of powerful waves known as tsunamis. These waves can travel across the ocean at high speeds, and when they reach shore, they can cause significant damage and loss of life. In fact, some of the deadliest tsunamis in history have been triggered by undersea volcanic eruptions, including the 1883 eruption of Krakatoa in Indonesia, which generated a tsunami that killed more than 36,000 people. Scientists closely monitor undersea volcanic activity in order to predict and prepare for potential tsunamis, but predicting the exact timing and strength of these waves remains a challenge. Nevertheless, efforts are ongoing to improve our understanding of undersea volcanic activity and its potential impact on coastal communities, in order to minimize the risk of catastrophic tsunamis in the future.

Know more about tsunamis here:

https://brainly.com/question/14782736

#SPJ11

What source(s) of energy makes it possible to move matter through the rock cycle?
A. solar energy
B. the Earth's internal heat
C. gravity
D. All of the possible answers are correct.

Answers

The movement of matter through the rock cycle is possible due to several sources of energy, and all the given options are correct.

Solar energy plays a crucial role in the rock cycle. It drives the water cycle, which is an essential part of the rock cycle. Water carries minerals and other materials from one location to another, contributing to the formation of different rock types. Solar energy also causes weathering and erosion, which break down and transport rocks from one place to another. The Earth's internal heat is another significant source of energy that drives the rock cycle. It powers plate tectonics, which is the process of the Earth's crust moving and interacting with one another. This movement leads to the formation of mountains, the creation of volcanic eruptions and igneous rocks, and the recycling of old rocks back into the mantle.

Gravity also plays a vital role in the rock cycle. Gravity causes the movement of rocks and other materials downhill, leading to erosion and the formation of sedimentary rocks. It also causes tectonic plates to move and collide, leading to the formation of metamorphic rocks. In conclusion, the movement of matter through the rock cycle is possible due to several sources of energy, including solar energy, the Earth's internal heat, and gravity. These energy sources work together to drive the rock cycle and continually shape the Earth's surface over millions of years.

Learn more about sedimentary rocks here:

https://brainly.com/question/10709497

#SPJ11

The model above represents zones that are present in many American cities. Which of the following design concepts of urban development is likely to have the most significant impact on the reduction of urban sprawl?
A. Transformation of warehouse space in zone 2 of the model into high-income rental properties
B. Construction of a large single-family housing development in zone 4 of the model
C. Gentrification of older housing in selected neighborhoods in zone 3 of the model
D. Construction of a large shopping mall in zone 1 of the model
E. Mixed-use land development in zone 5 of the model

Answers

The correct option is E. Mixed-use land development in zone 5 of the model is likely to have the most significant impact on the reduction of urban sprawl in American cities.

The definition of urban sprawl is "the spreading of urban developments on undeveloped land near a city." Urban sprawl has been defined as the unchecked expansion of roadways, commercial space, and housing over vast land tracts in many urban regions, with little regard for urban planning. Urban sprawl is a result of a demand for more living space and other residential amenities, though it is also a result of the necessity to accommodate a growing urban population in many metropolitan areas.

This concept promotes the integration of commercial, residential, and industrial land use within a single area, reducing the need for people to travel long distances for work or leisure activities. It also encourages walkability and the use of public transportation, reducing reliance on personal vehicles and decreasing traffic congestion.

The migration to the suburbs that started in the 1950s is what gave rise to urban sprawl in the United States. To avoid traffic, noise, crime, and other issues, as well as to have homes with larger square footage and yard space, people desired to reside outside of urban centers.

To learn more about Urban Sprawl, click here:

https://brainly.com/question/20361268

#SPJ11

The name of the site where slippage begins and earthquake waves radiate outward is called the __________.
A)hypocenter
B)scarp
C) rupture surface
D)fault
E)epicenter

Answers

A) Hypocenter,the name of the site where slippage begins and earthquake waves radiate outward is called the hypocenter. This is also referred to as the "focus" of the earthquake.

The hypocenter is located beneath the Earth's surface and is where the initial rupture occurs along a fault plane. The earthquake waves then travel outward from the hypocenter, causing ground shaking and other seismic effects. The depth of the hypocenter can vary depending on the location and type of fault. Shallow earthquakes with hypocenters less than 70 km deep are considered to be crustal earthquakes, while those with hypocenters deeper than 70 km are considered to be subduction earthquakes. The hypocenter is an important concept in seismology and is used to determine the location and magnitude of earthquakes.

Learn more about focus here:

https://brainly.com/question/17161852

#SPJ11

Describe the formation of Crater Lake. Compare it to the calderas found on shield volcanoes such as Kilauea.

Answers

Crater Lake was formed around 7,700 years ago when the volcano Mount Mazama erupted, causing its summit to collapse and creating a caldera. The caldera then filled with rainwater and snowmelt over time, forming the deepest lake in the United States.


In comparison to calderas found on shield volcanoes such as Kilauea, the formation of Crater Lake was much more explosive and cataclysmic. Shield volcanoes typically have relatively gentle eruptions, producing lava flows rather than explosive eruptions that cause caldera collapses. While Kilauea has experienced some caldera collapses in the past, they are not as large or dramatic as the one that formed Crater Lake. Additionally, Kilauea's calderas tend to fill with lava rather than water, creating a different type of volcanic feature.

Learn More about Mount Mazama here :-

https://brainly.com/question/13502481

#SPJ11

Rank each lava type according to the relative distance it can generally travel from a volcano vent before solidifying.
A. Mafic
B. Intermerdiate
C. Felsic

Answers

The relative distance that each type of lava can travel from a volcano vent before solidifying depends on several factors, including the viscosity (thickness), temperature, and gas content of the lava.

Here is a general ranking of each lava type based on how far it can typically travel before solidifying: A. Mafic lava has a low viscosity, which means it flows easily and can travel long distances before solidifying. Mafic lava can form extensive lava fields and can travel tens of kilometers or more from the vent before solidifying. B. Intermediate lava has a higher viscosity than mafic lava, so it does not flow as easily. As a result, it can typically travel several kilometers from the vent before solidifying. C. Felsic lava has the highest viscosity of the three types, meaning it is the thickest and least fluid. Felsic lava typically solidifies close to the vent, within a few hundred meters to a few kilometers at most. It's important to note that these are general guidelines and that the actual distance that lava can travel before solidifying can vary widely depending on specific conditions at each volcano, such as the temperature and gas content of the lava, the topography of the area, and the presence of obstacles that may impede the flow of lava.

Learn more about temperature here:

https://brainly.com/question/15267055

#SPJ11

Which of these is a type of seismic body wave?
A. Shear/secondary waves
B. Love waves
C. Rayleigh waves
D. Rotational waves

Answers

type of seismic body wave is Shear/secondary waves

Seismic body waves are waves of energy that propagate through the earth's interior during an earthquake. They are of two types - primary (P) waves and secondary (S) waves. P waves are longitudinal waves that travel faster than S waves, and can travel through solid, liquid, and gas. S waves, also known as shear waves, are transverse waves that travel through solid material only. They are slower than P waves and arrive after them during an earthquake.

learn more about seismic here:https://brainly.com/question/13725277

#SPJ11

Other Questions
Determine the fraction of the total, hemispherical emissive power that leaves a diffuse surface in the directions /4 Implementing ethical standards within an organization starts with: 3.1 If farmers plant hedges around their fields, explain what effect this might have on species diversity around their land? Abi takes out a loan that gathers compound interest. The table below shows the value of the loan over time. a) What is the rate of interest per annum? Give your answer as a percentage to 1 d.p. b) Work out the value of the loan 10 years after it starts. Give your answer in pounds () to the nearest 1p. Start After 1 year After 2 years 2500.00 2645.00 2798.41 What do we learn about Jack's birth father? A sedimentary rock that contains randomly distributed clay, sand, and pebble clasts is referred to as _______. If you could measure the orbital speeds of particles in an accretion disk around a black hole, what would you notice? 4. An invoice of OMR 15000 with the terms 6/10, 3/15,n/30 is dated on June 15. The goods are received on June 23. Thebill is paid on July 5. Calculate the amount of discountpaid. t/f: IT infrastructure consists of only those physical computing devices and software required to operate the enterprise. the first theorem of welfare economics (that a competitive equilibrium is pareto efficient) may not hold for economies with production if One number is four more than a second number. Two times the first number is 10 more than four times the second number Jenna invested $229 for 16 months in a bank and received a maturity amount of $252.25. If she had invested the amount in a fund earning 1.50% p.a. more, how much would she have had received at maturity? Round to the nearest cent Following the failure of the Mount St. Helens bulge, a series of ____ and debris flows formed from a mix of rock and water derived from melting snow. They continued to form for hours after the eruption began. (Enter only one word per blank.) Spanish 2 (Highschool) Help !! Myra uses source code belonging to older malware to develop new malware. She also removes some of the functions of the older malware. Whywould Myra do that?OAOBOCOD. to keep the new malware undetected through heuristic checksto recreate the older malwareto launch a blended attackto reduce the size of the malware match the following. group of answer choices insecticide used to kill mosquitoes; banned in the united states in 1973 due to its toxicity component of Find the critical point(s) of the function f(x) = px? + x - 56 on the interval [0,8]. The critical point(s) = -1 Find the maximum and minimum values of the function f(x) = {x? + x - 56 on the interval [0,8). The minimum value = !! The maximum value = If you don't get this in 3 tries, you can get a hint. Jane and her team are discussing with the business stakeholder what the expected behavior is of a particular user story. What step is Jane on in the ATDD four step process? A cruise ship leaves key west to go to cuba, which is 90 miles away. The cruise ship travels about 130 miles per hour. About how long will it take the ship to get to cuba if both s and r inputs of a nor-based rs flip-flop are set to logic-1, the flip-flop is said to be in?