Solve the system by graphing
Y = 5x + 1
Y = -x - 5

Answer: 100 cm

Step-by-step explanation:

1. Since the problem tells us that they are similar, we can infer that this larger rectangle is the same rectangle, only bigger.

2. With this information, we can do the equation 49/12.25 because then we will get the amount the rectangle grows by.

3. 49/12.25=4

4. Now, we can multiply the length(25) by 4.

5. 25 x 4=100

6. The length of the larger rectangle is 100.

I hope this helps!

The prime factors or the prime numbers whose product is 51 are 3 and 17.

What is the operation of prime numbers?

The operation of prime numbers refers to the various mathematical operations that can be performed using prime numbers. Prime numbers are positive integers that have exactly two divisors, 1 and the number itself. Some of the important operations involving prime numbers include:

Now,

If you meant to ask for the prime factors of 51, then they are 3 and 17.

because 51 is divisible by 3 because 5+1=6

and after dividing 51/3=17 which is also a prime number.

Hence,

            the prime factors of 51 are 3 and 17.

To know more about Prime numbers visit the link

brainly.com/question/881160

#SPJ1

Answer:

Step-by-step explanation:

Your equation is 0.75L +  0.5L + x = 2L
x = Orange juice

0.75L + 0.5L = 1.25L
2L - 1.25L = 0.75L

[tex]\frac{0.75L}{2L}[/tex] is your fraction
[tex]\frac{75}{200}[/tex]  simplified is [tex]\frac{3}{8}[/tex]
I hope this helped,

By using circumference of circle, we find that In one slice of pizza you will get about 8 olive pieces from Mario's Pizzeria.

The circumference of circle of a 20-inch diameter pizza can be calculated as follows:

Circumference = π × diameter

Circumference = 3.14 × 20

Circumference = 62.8 inches

If there is at least one olive piece per inch of crust, then there will be 62.8 olive pieces on the outer crust of the entire pizza.

If the pizza is cut into eight slices, each slice will have 1/8th of the total circumference of the pizza. Therefore, each slice will have:

62.8 inches ÷ 8 slices = 7.85 inches of outer crust

Since there is at least one olive piece per inch of crust, each slice will have approximately 8 olive pieces on the outer crust.

Therefore, you can expect to get about 8 olive pieces in one slice of pizza from Mario's Pizzeria.

To know more about circumference of circle:

https://brainly.com/question/26605972

#SPJ4

Answer:

Slope is -2. So, choice D is the best option.

Step-by-step explanation:

Start with one point then use the formula to get to the next point:

Rise
------

Run

Let's start at (0,5) then count down 2 points, which is the "Rise"(seems like an interesting name to pick but it works).
Next, you go to the right once. Which counts as the "Run".

Remember: The slope is like a ratio, and the "y" will always go as the numerator and the "x" as the denominator. Which is why "Rise" is on top and the "Run" is on the bottom.

So your answer would be 2/1. And that simplifies to 2. But since you went down and not up, it would be negative 2.

Hope this helps and if you have any other questions or need clarification please ask!

Answer: d

Step-by-step explanation:

the slope is positive 200 because she is gaining 200 points for every minute which is x. 200x or 200 multiplied by x is her slope and her y intercept is 3200

The population of the city will be approximately 597,543 people after 11 years.

We can solve this problem using the formula for exponential growth:

[tex]N = P(1 + r)^t[/tex]

where:

N = final population

P = initial population

r = annual growth rate (as a decimal)

t = number of years

In this case, we have:

P = 370,000

r = 0.0475 (since the annual growth rate is 4.75%)

t = 11

Substituting these values into the formula, we get:

[tex]N = 370,000(1 + 0.0475)^{11}[/tex]

Using a calculator, we can simplify this expression to:

N = 597,542.64

Learn more about exponential here https://brainly.com/question/28596571

#SPJ4

The equation of the circle is 16 x^2 + 16x +16 y^2- 4y -45 =0  

Here the center of circle is at (1/2, 1/4 ) and radius is √ 3

The equation of a circle with center (h , k) and radius r is given by

(x - h)^2 + ( y - k)^2 = r^2

Here it is given that the center of circle  (-1/2 , 1/4) = (h, k) and radius r= √ 3

Therefore the equation of required circle is

(x - (-1/2) )^2 + (y-1/4)^2= √ 3^2

=> x^2  + 1/4 + x + y^2 +1/16 - 4y= 3

=> 16x^2 + 4 +16x+ 16 y^2 -4y +1= 48

=>16 x^2 + 16x +16 y^2- 4y -45 =0

therefore the required equation of circle is

16 x^2 + 16x +16 y^2- 4y -45 =0

To know more about the equation of circle :-

https://brainly.com/question/30997261

Answer:

C

Step-by-step explanation:

The red graph is obtained by shifting the graph of f(x) = 4 - x² upwards by some amount. We can see that the highest point on the red graph occurs at x = 0, where the value is 4.

To shift the graph of f(x) upwards by 3 units, we can add 3 to the entire function:

f(x) + 3 = 4 - x² + 3

= 7 - x²

So the equation of the red graph is:

g(x) = 7 - x²

Therefore, the correct answer is option C: g(x) = 7 - x².

Answer:

759=165% of last quarters members so you could divide by 1.65(move the decimal place twice to the left) so you get 460 people were there last quarter

Step-by-step explanation:

Step-by-step explanation:

If your age is ' a ' then your max heart rate = 220 - a

Answer:

1.6 minutes

Step-by-step explanation:

6.4 meters/4 speed

The quadratic equation with the easiest method that could be used to find the solutions:

5x² + 24x + 21 = 0 :: Factoring

x² + 4x + 27 = 0 :: Completing the Square

x² + 8x + 15 = 0 :: Factoring

-3x² = -5x + 8 :: Dividing by x and simplifying gives Quadratic Formula

An equation is a mathematical statement that uses an equal sign to show that two expressions are equal. It contains variables, constants, and mathematical operations such as addition, subtraction, multiplication, and division. The goal of an equation is to solve for the variable(s) that make the equation true.

Here,

The easiest method to find the solutions of a quadratic equation depends on the form of the equation and the tools available. Here are some common methods and when they are typically used:

Zero Product Property/Factoring: This method is used when the quadratic equation can be factored into two linear factors, each of which equals zero.

Square Root Property: This method is used when the quadratic equation is in the form of x² = a, where a is a positive number. For example, the equation x² = 9 can be solved using the Square Root Property: take the square root of both sides and remember to include both the positive and negative roots, giving x = ±3.

Completing the Square: This method is used when the quadratic equation is in the form of x² + bx + c = 0, where b and c are constants. Completing the square involves adding and subtracting a constant term to both sides of the equation to create a perfect square trinomial, which can then be factored and solved using the Square Root Property.

Quadratic Formula: This method is used when the quadratic equation is in the form of ax² + bx + c = 0, where a, b, and c are constants and a ≠ 0. The Quadratic Formula is x = (-b ± √(b² - 4ac)) / 2a.

To know more about equation,

https://brainly.com/question/28243079

#SPJ1

Answer:

Step-by-step explanation:

minor, semi, minor, major   (in that order)

minor is smaller than a semi-circle while major is larger than a semi-circle.

this is incorrect because the length of the long sides cannot be expressed in terms of just y. We need additional information about the dimensions of the rectangle to determine the length of the long sides.

a) The equation that represents this situation is:

2x + 2y = 175

where x is the length of the short sides (in feet) and y is the length of the long sides (in feet).

b) The equation in terms of y is:

2(6) + 2y = 175

which simplifies to:

12 + 2y = 175

2y = 163

y = 81.5

However, this is incorrect because the length of the long sides cannot be expressed in terms of just y. We need additional information about the dimensions of the rectangle to determine the length of the long sides.

Learn more about length here

https://brainly.com/question/13194650

#SPJ4

Answer:

1. 1/2

2. -4/1

3. 1/1

Step-by-step explanation:

Answer:

1 y=2/1+2

2 y=.25x+3

3 y=x-2

Step-by-step explanation:

Step-by-step

y=mx+b

1. 2

2. .25

3. 1

The sum of the volume of the square prism and the square pyramid is 672 cubic inches.

What is prism ?

A prism is a three-dimensional geometric shape that has two identical, parallel polygonal bases and rectangular sides that connect the bases. The sides are perpendicular to the bases and their shape depends on the shape of the base. For example, if the base is a square, the prism is called a square prism. If the base is a rectangle, the prism is called a rectangular prism. The height of the prism is the perpendicular distance between the bases.

According to the question:
First, let's calculate the volume of the square prism:

The formula for the volume of a square prism is V = lwh, where l is the length, w is the width, and h is the height.

In this case, the length (l) and width (w) of the prism are both equal to a, which is 10 inches, and the height (h) is 6 inches. So, we have:

V_prism = lwh = 10 x 10 x 6 = 600 cubic inches

Next, let's calculate the volume of the square pyramid:

The formula for the volume of a square pyramid is V = (1/3)Bh, where B is the area of the base and h is the height.

In this case, the base of the pyramid is a square with side length b, which is 6 inches, so the area of the base is:

[tex]B = b^2 = 6^2 = 36 square inches[/tex]

The height of the pyramid is also 6 inches, so we have:

V_pyramid = (1/3)Bh = (1/3) x 36 x 6 = 72 cubic inches

Finally, the total volume is the sum of the volumes of the prism and pyramid:

V_total = V_prism + V_pyramid = 600 + 72 = 672 cubic inches

Therefore, the sum of the volume of the square prism and the square pyramid is 672 cubic inches.

To know more about prism visit:
https://brainly.com/question/13379929
#SPJ1

The type of transformation that occurred in each object are:

1) Rotation

2) Translation

3) Reflection

4) Translation

There are different types of transformations of objects such as:

Translation: Translation is said to occur when we slide a figure in any direction.

Reflection: Reflection is said to occur when we flip a figure over a line.

Rotation: Rotation is said to occur when we rotate a figure a certain degree around a point.

Dilation: Dilation is said to occur when we enlarge or reduce a figure.

1) The given transformation is rotation because the original object was clearly rotated.

2) The given transformation is said to be translation because the object just changed position.

3) The transformation that occurred is said to be a reflection because it is a mirror image.

4)  The given transformation is said to be translation because the object just changed position.

Read more about Transformation at: https://brainly.com/question/29715209

#SPJ1

The equation of the quadratic function that passes through these points is:

[tex]y = -3x^2 - 12x - 8.[/tex]

What is quadratic equation?

A quadratic equation is a polynomial equation of the second degree, which means it contains one variable with an exponent of 2. The general form of a quadratic equation is:

[tex]ax^2 + bx + c = 0[/tex]

Using polynomial interpolation with these 5 points, we can find a quadratic polynomial that passes through all the points. Let the equation of the polynomial be [tex]y = ax^2 + bx + c[/tex].

Using the point (0, -8), we get:

[tex]-8 = a(0)^2 + b(0) + c[/tex]

c = -8

Using the point (-1, 1), we get:

[tex]1 = a(-1)^2 + b(-1) - 8[/tex]

a - b = 9

Using the point (-3, 1), we get:

[tex]1 = a(-3)^2 + b(-3) - 8[/tex]

9a - 3b = 27

Using the point (-4, -8), we get:

[tex]-8 = a(-4)^2 + b(-4) - 8[/tex]

16a - 4b = 0

Using the point (-2, 4), we get:

[tex]4 = a(-2)^2 + b(-2) - 8[/tex]

4a - 2b = 12

Solving this system of equations, we get:

a = -3

b = -12

c = -8

Therefore, the equation of the quadratic function that passes through these points is:

[tex]y = -3x^2 - 12x - 8.[/tex]

To learn more about quadratic equation visit:

https://brainly.com/question/1214333

#SPJ1

EXPLANTION:

1. For a browsing time of 17 minutes, the predicted amount spent can be calculated using the equation of the regression line:

Y = 2 + 0.98X, where X is the browsing time in minutes.

Step-by-step:
Y = 2 + 0.98(17)
Y = 2 + 16.66
Y = 18.66 dollars

The observed value (40.3 dollars) is above the regression line, as it is higher than the predicted amount spent (18.66 dollars).

2. For a browsing time of 14 minutes, the predicted amount spent can be calculated using the equation of the regression line:

Y = 2 + 0.98X.

Step-by-step:
Y = 2 + 0.98(14)
Y = 2 + 13.72
Y = 15.72 dollars

The observed value (10.84 dollars) is below the regression line, as it is lower than the predicted amount spent (15.72 dollars).

3. For a browsing time of 28 minutes, the predicted amount spent can be calculated using the equation of the regression line:

Y = 2 + 0.98X.

Step-by-step:
Y = 2 + 0.98(28)
Y = 2 + 27.44
Y = 29.44 dollars

The observed value (27.2 dollars) is below the regression line, as it is lower than the predicted amount spent (29.44 dollars).

To know more about Regression :

https://brainly.com/question/14313391

#SPJ11

When the equilibrium point is above the potential GDP line, the economy is experiencing inflationary pressure.

In the AD/AS model, whether the economy is in a recession is illustrated by how close the equilibrium is to the potential GDP line. The potential GDP line represents the maximum level of output that an economy can produce with its existing resources and technology.What is the AD/AS model?The AD/AS model is a graphical representation of the macroeconomic relationship between aggregate demand (AD) and aggregate supply (AS). This model is used to explain the behavior of the economy by demonstrating how changes in the level of aggregate demand and aggregate supply can impact the economy's level of output and prices.

The model's AD curve represents the total demand for all goods and services in an economy at different price levels. The AS curve represents the total supply of all goods and services in the economy at different price levels.

The intersection of the AD and AS curves represents the equilibrium point where the economy's output level and price level are determined. The economy is in a recession when the equilibrium point is below the potential GDP line.

for such more questions on equilibrium point

https://brainly.com/question/29078763

#SPJ11

Answer:

The answer is

-7/8 + 3/10

Step-by-step explanation:

See the picture

Hope you understand :)

The surface area of the cylinder is approximately 127.17 cm².

Surface area of cylinder is the total space covered by the flat surfaces of the bases of the cylinder and its curved surface. The formula for the surface area of a cylinder is: 2πr² + 2πrh.

To solve this problem, we first need to find the radius of the cylinder. The diameter of the cylinder is 3 cm, so the radius is half of that:

r = 3/2

= 1.5 cm

We need to substitute the values we know into the formula for surface area:

= 2π(1.5)² + 2π(1.5)(12)

= 2π(2.25) + 2π(18)

= 4.5π + 36π

= 40.5π

We will now approximate the value of π to get the numerical answer, so, our Surface Area will be:

= 40.5π

= 40.5 * π

= 40.5 * 3.14

≈ 127.17 cm²

Answered question "A cylinder is 12 cm tall and has a diameter of 3 cm. What is the surface area?"

Read more about surface area

brainly.com/question/28178861

#SPJ1

Psychologists have raised concerns about the accuracy and validity of ____ personality tests, as they are not standardized. This means that the same test administered to two different people can yield different results, making it difficult to interpret. Moreover, results may be inconsistent, meaning the same test administered at different times could produce different results. This lack of consistency can lead to inaccurate interpretations and can render the tests less useful. Furthermore, there is a lack of standardization of criteria and methodologies used to evaluate personality tests, which could lead to misinterpretations of results.
In order to address these issues, it is important to use standardized personality tests, which are tested and validated to ensure consistent and accurate results. This will ensure that the tests yield consistent results and can be interpreted accurately.

Additionally, researchers must adhere to established guidelines and criteria to ensure that the results are reliable and valid. This will enable professionals to confidently use the tests and make accurate interpretations of the results.

for such more questions on standardization

https://brainly.com/question/14095938

#SPJ11

when some syrup from a bottle was poured into the container, it got half full. The volume of the syrup poured from the bottle into the container in millimeters is 576,000 cubic millimeters.

Since for solving the problem we need to find the volume of the container in millimeters. We are given the length, breadth, and height which are 12 cm,8 cm, and  36 cm.Now the volume of the container is:

V = l x w x h = 12 cm x 8 cm x 36 cm = 3,456 cubic cm. Now  we convert the above result  into millimeters by  multiplying by 1,000, so we get V= 3456 x 1000= 34560000 cubic mm

Now to find the volume of the syrup that was poured into the container,  we know that the container was one-third full before the syrup was added and half full after the syrup was added.onsidering x to be the volume of the syrup poured from the bottle into a container and n to be the volume of the syrup in the container after it was added:

1/3(V) + x = 1/2(V), where v is the  volume of the container in millimeters, so we substitute the calculated value of the volume we get :

=>1/3(V) + x = 1/2(V)

=>x = 1/2(V) - 1/3(V)

=> x = 1/6(V) = 1/6(3,456,000)  = 576,000 cubic mm

To know more about volume refer to the link brainly.com/question/1578538

#SPJ4

To measure central tendencies in the data collected from the Consumer Price Index (CPI), the dental director should use measures of central tendency, such as the mean, median, and mode.

The mean is the average of a set of numbers and is calculated by adding all the numbers together and then dividing by the total number of numbers. The median is the middle number when the numbers are placed in order from least to greatest. The mode is the number that appears most often in a set of numbers.

Using these measures of central tendency will allow the dental director to gain a better understanding of the CPI data, as they will be able to identify the center point of the data and also see how frequently particular values appear. This can help in making informed decisions about policies and other changes.

See more about measure at: https://brainly.com/question/20904592

#SPJ11

Answer:

  no

Step-by-step explanation:

You want to know if a triangle with sides 54, 66, and 87 is a right triangle.

The side lengths of a right triangle will satisfy the relation given by the Pythagorean theorem. Here, that would require ...

  54² +66² = 87²

  2916 +4356 = 7569

  7272 = 7569 . . . . . . . . . false — not a right triangle

Triangle WXY is not a right triangle, so XY is not tangent to circle W.

__

Additional comments

The parity of the integer side lengths of a right triangle is always even. That is, there can be two odd side lengths, but never just one odd side length.

Side lengths 54 and 66 are even, while length 87 is odd. There is only one odd side length, so this triangle cannot be a right triangle.

A tangent always meets a radius at right angles, so XY is a tangent if and only if angle X is a right angle.

According to the information provided, k and m are crossing lines with an angle of 86°. We know this because k and m are straight lines.

The angles add up to 180 degrees.

Then we receive,

[tex]a + 86 =180[/tex]

Or, a = 180 -86

Or, a = 94°.

As a result, an is 94°.

The angle an is 94 degrees.

Supplementary angle are formed when two angles add to 180 degrees. When additional angles are added together, they form a straight angle, or 180 degrees. In these other words, if indeed the sum of angles 1 and 2 equals 180 degrees, angles 1 and 2 are supplementary. Angles 1 and 2 are referred to as "supplements" to one another in this context.

To know more about angle click here

brainly.com/question/29015700

#SPJ9

Answer:

1 ft per 4 seconds

120 seconds

72 seconds

Step-by-step explanation: