According to the given information, 0.97306, 0.02669, and 0.000005.
What is probability?
Probability is a measure of the likelihood or chance of an event occurring. It is a number between 0 and 1, where 0 represents an impossible event and 1 represents a certain event.
a. The probability that a golfer does not score a hole in one on the sixth hole is [tex]$1 - \frac{1}{3,709}$[/tex]. Since there are 156 golfers, the probability that none of them score a hole in one is
[tex]$$\left(1 - \frac{1}{3,709}\right)^{156} \approx 0.97306$$[/tex]
The probability that no one gets a hole in one on the sixth hole is 0.97306
b. The probability that exactly one golfer gets a hole in one on the sixth hole is
[tex]$${156 \choose 1} \cdot \frac{1}{3,709} \cdot \left(1 - \frac{1}{3,709}\right)^{155} \approx 0.02669$$[/tex]
The probability that exactly one golfer gets a hole in one on the sixth hole is 0.02669
c. The probability that four golfers score a hole in one on the sixth hole is
[tex]$${156 \choose 4} \cdot \left(\frac{1}{3,709}\right)^4 \cdot \left(1 - \frac{1}{3,709}\right)^{156-4} \approx 0.000005$$[/tex]
The probability that four golfers score a hole in one on the sixth hole is 0.000005
To learn more about probability visit:
brainly.com/question/4152354
#SPJ1
Team batting averages for Major League Baseball in a certain year are represented below. Find the variance and standard deviation for each league. Compare the results. Use a graphing calculator. Round the answers to five decimal places for variance and four decimal places for standard deviation. The National League variance is and the standard deviation is
The National League variance is 0.00020 and the standard deviation is 0.0141 while the American League variance is 0.000191 and the standard deviation is 0.0138.
According to question, the team batting averages for Major League Baseball in a certain year are represented below. We have to find the variance and standard deviation for each league. Given below is the table of team batting averages in National League and American League.
National League American League
.240 .237
.242 .244
.240 .251
.247 .233
.256 .243
.249 .248
.256 .238
.240 .241
.243 .250
.237 .238
We know that,
variance = (1/N)* Σ(xi - µ)²
Standard deviation = √variance
National League:
The mean of National League, µ = (0.240 + 0.242 + 0.240 + 0.247 + 0.256 + 0.249 + 0.256 + 0.240 + 0.243 + 0.237)/10 = 2.443/10 = 0.2443.
Substitute the values in the formula, variance = (1/10)* Σ(xi - µ)² = (1/10)* [ (0.240 - 0.2443)² + (0.242 - 0.2443)² + (0.240 - 0.2443)² + (0.247 - 0.2443)² + (0.256 - 0.2443)² + (0.249 - 0.2443)² + (0.256 - 0.2443)² + (0.240 - 0.2443)² + (0.243 - 0.2443)² + (0.237 - 0.2443)² ]= 0.00019749
Standard deviation = √variance = √0.00019749 = 0.01405
The National League variance is 0.00020 and the standard deviation is 0.0141
American League:
The mean of American League, µ = (0.237 + 0.244 + 0.251 + 0.233 + 0.243 + 0.248 + 0.238 + 0.241 + 0.250 + 0.238)/10 = 2.423/10 = 0.2423
Substitute the values in the formula, variance = (1/10)* Σ(xi - µ)² = (1/10)* [ (0.237 - 0.2423)² + (0.244 - 0.2423)² + (0.251 - 0.2423)² + (0.233 - 0.2423)² + (0.243 - 0.2423)² + (0.248 - 0.2423)² + (0.238 - 0.2423)² + (0.241 - 0.2423)² + (0.250 - 0.2423)² + (0.238 - 0.2423)² ]= 0.00019119
Standard deviation = √variance = √0.00019119 = 0.01383
To know more about standard deviation and variance, refer here:
https://brainly.com/question/29758680#
#SPJ11
ou have learned that given a sample of size n from a normal distribution, the CL=95% confidence interval for the mean can be calculated by Sample mean +/- z((1-CL)/2)*Sample std/sqrt(n). Where z((1-cl)/2)=z(.025) is the z score.
a. help(qnorm) function. Use qnorm(1-.025) to find z(.025).
b. Create a vector x by generating n=50 numbers from N(mean=30,sd=2) distribution. Calculate the confidence interval from this data using the CI formula. Check whether the interval covers the true mean=30 or not.
c. Repeat the above experiments for 200 times to obtain 200 such intervals. Calculate the percentage of intervals that cover the true mean=30. This is the empirical coverage probability. In theory, it should be very close to your CL.
d. Write a function using CL as an input argument, and the percentage calculated from question c as an output. Use this function to create a 5 by 2 matrix with one column showing the theoretical CL and the other showing the empirical coverage probability, for CL=.8, .85, .9, .95,.99.
a. To find the z score for a given confidence level, you can use the `qnorm()` function in R. The `qnorm()` function takes a probability as an argument and returns the corresponding z score. To find the z score for a 95% confidence level, you can use `qnorm(1-.025)`:
```R
z <- qnorm(1-.025)
```
This will give you the z score for a 95% confidence level, which is approximately 1.96.
b. To create a vector `x` with 50 numbers from a normal distribution with mean 30 and standard deviation 2, you can use the `rnorm()` function:
```R
x <- rnorm(50, mean = 30, sd = 2)
```
To calculate the confidence interval for this data, you can use the formula:
```R
CI <- mean(x) + c(-1, 1) * z * sd(x) / sqrt(length(x))
```
This will give you the lower and upper bounds of the 95% confidence interval. You can check whether the interval covers the true mean of 30 by seeing if 30 is between the lower and upper bounds:
```R
lower <- CI[1]
upper <- CI[2]
if (lower <= 30 && upper >= 30) {
print("The interval covers the true mean.")
} else {
print("The interval does not cover the true mean.")
}
```
c. To repeat the above experiment 200 times and calculate the percentage of intervals that cover the true mean, you can use a for loop:
```R
count <- 0
for (i in 1:200) {
x <- rnorm(50, mean = 30, sd = 2)
CI <- mean(x) + c(-1, 1) * z * sd(x) / sqrt(length(x))
lower <- CI[1]
upper <- CI[2]
if (lower <= 30 && upper >= 30) {
count <- count + 1
}
}
percentage <- count / 200
```
This will give you the percentage of intervals that cover the true mean.
d. To write a function that takes a confidence level as an input and returns the percentage of intervals that cover the true mean, you can use the following code:
```R
calculate_percentage <- function(CL) {
z <- qnorm(1-(1-CL)/2)
count <- 0
for (i in 1:200) {
x <- rnorm(50, mean = 30, sd = 2)
CI <- mean(x) + c(-1, 1) * z * sd(x) / sqrt(length(x))
lower <- CI[1]
upper <- CI[2]
if (lower <= 30 && upper >= 30) {
count <- count + 1
}
}
percentage <- count / 200
return(percentage)
}
```
You can then use this function to create a 5 by 2 matrix with one column showing the theoretical CL and the other showing the empirical coverage probability:
```R
CL <- c(.8, .85, .9, .95, .99)
percentage <- sapply(CL, calculate_percentage)
matrix <- cbind(CL, percentage)
```
This will give you a matrix with the theoretical CL in the first column and the empirical coverage probability in the second column.
Know more about z score here:
https://brainly.com/question/15016913
#SPJ11
Solve the system of equations graphed on the coordinate axes below.
The solution to the system of equations is (1,1), which is the point where the two lines intersect on the coordinate axes.
Describe Equation?An equation is a mathematical statement that shows the equality between two expressions. It contains one or more variables, which are usually represented by letters, and mathematical operations such as addition, subtraction, multiplication, and division. Equations can be used to model and solve various real-world problems in fields such as physics, engineering, and finance. The goal in solving an equation is to find the value of the variable that satisfies the equation. This can be done by applying mathematical operations to both sides of the equation in a systematic way until the variable is isolated on one side.
To solve the system of equations graphed on the coordinate axes, we need to find the point at which the two lines intersect. This point represents the solution to the system of equations.
First, we can set the two equations equal to each other, since they both equal y:
2x-1 = -x+2
Adding x to both sides, we get:
3x-1 = 2
Adding 1 to both sides, we get:
3x = 3
Dividing both sides by 3, we get:
x = 1
Now we can substitute x=1 into either equation to find y:
y = 2(1) - 1
y = 1
Therefore, the solution to the system of equations is (1,1), which is the point where the two lines intersect on the coordinate axes.
To know more about coordinate visit:
https://brainly.com/question/16634867
#SPJ1
Find the area of the trapezoid to the nearest tenth.
PLS HELP ITS URGENT
AND THIS IS GEOMETRY
Area of the given trapezoid is 1.8m²
What is trapezoid?A trapezoid is a polygon having four sides, two of which are parallel and two of which are not. The bases and legs of the trapezoid are known as the parallel and non-parallel sides, respectively. The height or altitude of the trapezoid is defined as the distance between the bases.
The formula, which may be used to determine a trapezoid's area,
[tex]A= \frac{a+b}{2}h[/tex]
where, a and b are the lengths of the two bases and h is the height between two bases.
Given in the trapezoid figure, a= 2, b= 0.9, h is the base upper triangle.
We use the following trigonometric relationship to find the base of the upper triangle,
Apply sine rule in upper triangle with connecting line h.
Sin 45° = [tex]\frac{h}{1.8}[/tex]
h = 1.8 × Sin 45°
h = 1.8 × 0.707
h = 1.273m
Then, the area of trapezoid:
[tex]A= \frac{a+b}{2}h= \frac{2+0.9}{2}*h[/tex]
[tex]A= \frac{2.9}{2}*1.273[/tex]
A = 1.845m²
Therefore, the area of the trapezoid to the nearest tenth is 1.8m²
To know more about area, visit:
https://brainly.com/question/25292087
#SPJ1
Solve the system of equations. − 4 � + 3 � = − 2 � = � − 1 −4x+3y=−2 y=x−1 � = x=x, equals � = y=y, equals
The solution to the system of equations is: x = -1 and y = -2.
What is system of equations?A system of equations is the set of two or more equations with the same variables.
An example is: 2x + 3y = 10 and 4x - 5y = -8
To solve the system of equations:
-4x + 3y = -2
y = x - 1
We can substitute the second equation into the first to eliminate y:
-4x + 3(x - 1) = -2
Simplifying and solving for x:
-4x + 3x - 3 = -2
-x = 1
x = -1
Now that we know x = -1, we can use the second equation to find y:
y = -1 - 1
y = -2
To know more about variables visit:
https://brainly.com/question/29827463
#SPJ1
What should your units on your base area calculations be, and why? How is this different from the units on your volume calculations
The units for base area calculations are squared units and the units for volume calculations are cubed units. This is because the area and volume calculations require different equations and different units of measurement.
The units on your base area calculations should be squared units, such as square meters, square centimeters, square inches, or square feet. This is because the area of a two dimensional shape is the amount of space occupied by the shape and is calculated by taking the length of the base and multiplying it by the width of the base. For example, if a rectangle has a length of 5 meters and a width of 3 meters, the area of the rectangle would be 5 x 3 = 15 square meters.
The units on your volume calculations should be cubed units, such as cubic meters, cubic centimeters, cubic inches, or cubic feet. This is because the volume of a three dimensional shape is the amount of space occupied by the shape and is calculated by taking the area of the base and multiplying it by the height of the shape. For example, if a cube has an area of 15 square meters and a height of 4 meters, the volume of the cube would be 15 x 4 = 60 cubic meters.
Learn more about dimensional shape here:
https://brainly.com/question/22203904
#SPJ4
los ladrillos de una balanza está en equilibrio pesan todos lo mismo en un en un lado de la balanza hay 5 kg y 9 ladrillos en el otro hay 22 kilogramos y 4 ladrillos Cuánto pesa un ladrillo
The brick weighs 3.4 kilograms.
Define the term Quantities?Quantities are values that can be measured or counted. They are typically represented by numerical values and units of measurement.
Let's assume that the weight of each brick is the same. Let's also denote the weight of each brick by "w" (in kilograms).
On one side of the scale, we have 9 bricks and 5 kilograms. So the total weight on this side is:
Total weight = (9 x w) + 5
On the other side of the scale, we have 4 bricks and 22 kilograms. So the total weight on this side is:
Total weight = (4 x w) + 22
Since the bricks on the scale are in balance, the total weight on both sides must be equal. Therefore, we can set the two expressions for total weight equal to each other and solve for w:
(9 x w) + 5 = (4 x w) + 22
Expanding and simplifying the equation, we get:
5 x w = 17
Therefore, the weight of each brick is:
w = 17 / 5
w = 3.4 kilograms
So each brick weighs 3.4 kilograms.
To know more about equation, visit:
https://brainly.com/question/2228446
#SPJ1
Please ASAP Help
Will mark brainlest due at 12:00
Answer:
plot the point at -5
Step-by-step explanation:
The function h is defined by the following rule.
h(x) = 5x - 1
complete the function table
x h(x)
-5
-4
1
2
3
sorry for the bad formatting i couldn't copy and paste the table
We can use the rule for h(x) to calculate the output values of the function for each given input value of x, which allows us to complete the function table mathematically.
What is a function?In mathematics, a function is a rule or mapping that assigns a unique output value for every input value in a specified set
According to question:To complete the function table mathematically, we need to use the given rule for the function h(x) = 5x - 1 and substitute the given values of x to find the corresponding values of h(x).
For example, when x = -5, we can find the corresponding value of h(x) as follows:
h(-5) = 5(-5) - 1
= -26
Similarly, we can substitute x = -4, 1, 2, and 3 into the rule for h(x) to find the corresponding values of h(x) for each input value of x. This gives us the completed function table:
x h(x)
-5 -26
-4 -21
1 4
2 9
3 14
Therefore, we can use the rule for h(x) to calculate the output values of the function for each given input value of x, which allows us to complete the function table mathematically.
To know more about function visit:
https://brainly.com/question/28028288
#SPJ1
*PLS HELP ASAP*
what is the median of the graph?
(btw the graph is in height (feet and inches)
Answer:
5'6 and 5'0
Step-by-step explanation:
Put the graph in order of dots
4'11- 1
5'1- 1
5'3- 1
5'6- 1
5'0- 2
5'2- 2
5'5- 2
5'4- 5
The middle values are 5'6 and 5'0, so that should be the answer.
What are the x-intercepts for the equation y=0. 2(x+1)(x-14)
The x-intercepts for the equation y=0 is -1 and 14 respectively
What is intercept?Intercepts in mathematics are points where a graph crosses the x and/or y axes, or n x-intercept is where the graph crosses (or touches) the x-axis; a y-intercept is where the graph crosses (or touches) the y-axis
The given equation is 2(x+1)(x-14)
Opening the bracket to have
x²-14x+x-14 = 0
Solving the quadratic equation to have
2[x²-13x+14] =0
2x-26x+28 = 0
Dividing by 2 to have
x²-13x-14 =0
(x²-14x)+(x -14) =0
x(x-14) + 1(x-14)
x+1 = 0 and x-14 = 0
there values of x are
x= -1 and x = 14
The intercept of the equation is at x=-1 and x=14
Learn more about intercept on https://brainly.com/question/14180189
#SPJ1
an ant is about to climb a 50-meter tree. in 2 hours, it can climb 5 meters, but it then slips down 1 meter. how long does it take the ant to reach the top
The ant will reach the top in 16.67 hours, or approximately 16 hours and 40 minutes
An ant is about to climb a 50-meter tree. In 2 hours, it can climb 5 meters, but it then slips down 1 meter. How long does it take the ant to reach the top?An ant can climb 4 meters in 1 hour since it climbs 5 meters but then slides down 1 meter in 2 hours. Let us assume that it takes the ant n hours to get to the tree's top. We don't understand the precise number of hours, thus we'll use 'n' to represent the number of hours it takes the ant to reach the top of the tree.
The ant climbs 4 meters per hour, thus it climbs 4n meters after n hours.The ant slips down 1 meter each hour, therefore, it slides down 1n meters after n hours.If the ant climbs 4n meters but slips down 1n meters, it is actually at 3n meters after n hours. Therefore, 3n = 50 since the ant should reach the top of a 50-meter tree.Since 3n = 50, n = 50/3 ≈ 16.67 (to two decimal places). As a result, the ant will reach the top in 16.67 hours, or approximately 16 hours and 40 minutes.
Read more about time and distance at
https://brainly.com/question/18798899
#SPJ11
A store imploys 11 woman and 12 men
What percentage of the employees are men?
Please answer this its for a test
1) The surface area of the figure is of 72 square units.
2) Removing the top two cubes, the surface area of the figure would be of 60 square units.
How to obtain the surface area of a cube?The surface area of a cube of side length a is given by the equation presented as follows:
S = 6a².
For this problem, we have that the parameters are given as follows:
12 cubes.Each cube has a side length of one unit.Hence the surface area of the figure is given as follows:
S = 12 x 6 x 1
S = 72 square units.
Removing the top two cubes, the surface area of the figure would be given as follows:
S = (12 - 2) x 6 x 1
S = 60 square units.
More can be learned about the surface area of a cube at https://brainly.com/question/26403859
#SPJ1
The band students at Brookshaw Junior High School got to choose between ordering a hoodie or a T-shirt to wear on spirit day this year. In the seventh grade band, 7 students ordered the hoodie and 18 students ordered the T-shirt. In the eighth grade band, 12 students ordered the hoodie and 15 students ordered the T-shirt. The hoodies cost h dollars each, and the T-shirts cost t dollars each.
Pick all the expressions that represent how much the band students spent on hoodies and T-shirts.
Answer:
[tex]19h + 33t[/tex]
[tex]7h + 18t +12h + 15t[/tex]
Step-by-step explanation:
The two expressions above are equal and both represent the total spent on hoodies and t-shirts.
[tex]25(h+t) + 27(h + t)[/tex] is incorrect because this implies that the cost of t-shirts and hoodies are interchangeable. The choice in the bottom right is incorrect also because it is equivalent to the aforementioned expression.
write an equation in slope-intercept form of the line that passes through the given points
[tex]\left[\begin{array}{ccc}x&y\\-2&2\\0&1\\2&0\\4&-1\end{array}\right][/tex]
We can find the slope between the first two points (-2, 2) and (0, 1):
m = (1 - 2) / (0 - (-2))
m = -1 / 2
Now that we have the slope (m), we can use the point-slope form of the equation of a line to find the y-intercept (b). Using the point (0, 1):
y - y1 = m(x - x1)
y - 1 = (-1/2)(x - 0)
y = (-1/2)x + 1
Therefore, the equation of the line in slope-intercept form that passes through the given points is:
y = (-1/2)x + 1
Please mark this answer as brainliest if possible.
a dvd rental company charges $10 per month plus $0.75 per rental. Andy wants to spend no more than 25.00 per month on DVD rentals. Select the inequality that represents how many DVDs Andy can rent in one month that satisfies this condition. The number of rentals in a month is represented by n. A. 10.75n < 25
The answer of the question based on the inequality the answer is Andy can rent up to 20 DVDs in a month and spend no more than $25.
What is Inequality equations?An inequality equation is mathematical statement that compares the two values or expressions using inequality symbol such as "<" (less than), ">" (greater than), "<=" (less than or equal to), ">=" (greater than or equal to), or "!=" (not equal to).
The total cost, C, for renting n DVDs in a month is given by:
C = 10 + 0.75n
The question tells us that Andy wants to spend no more than $25 per month on DVD rentals. Therefore, we can write an inequality:
C ≤ 25
Substituting the expression for C from above, we get:
10 + 0.75n ≤ 25
Simplifying the inequality, we can subtract 10 from both sides:
0.75n ≤ 15
Finally, we can divide both sides by 0.75:
n ≤ 20
Therefore, the inequality that represents how many DVDs Andy can rent in one month that satisfies the condition of spending no more than $25 per month is:
n ≤ 20
So, Andy can rent up to 20 DVDs in a month and spend no more than $25.
To know more about Expressions visit:
https://brainly.com/question/24242989
#SPJ1
4. 2. 4Practice:Modeling: Slope-Intercept Equation of a Line
The slope-intercept form of the equation of a line is: y = mx + b
Where: y is the dependent variable (usually represented on the vertical axis of a graph). x is the independent variable (usually represented on the horizontal axis of a graph). m is the slope of the line (which represents the rate of change of y with respect to x). b is the y-intercept (which represents the value of y when x is equal to 0). To use this equation, you need to know the slope (m) and the y-intercept (b) of the line. You can find the slope of a line by taking any two points on the line and using the formula:
m = (y2 - y1) / (x2 - x1)
where (x1, y1) and (x2, y2) are any two points on the line. Once you know the slope, you can substitute it and the y-intercept into the slope-intercept form of the equation of the line to get the equation in its final form.
To learn more about slope-intercept click here
brainly.com/question/30216543
#SPJ4
DUE TODAY PLEASE HELP NOW!!!!!!!!!!!!! 20 POINTS
Here is another triangle similar to DEF found in the lesson section labeled “Shrinking Triangles”.
• Label the triangle D”E”F”.
• What is the scale factor from triangle DEF to triangle D”E”F”?
• What are the coordinates of F”? Explain how you know.
• What are cos(D”), sin(D”), and tan(D”)?
The scale factor of dilation is 1/40 and the coordinates of F" are (1440, 600)
Labelling the image of the triangleThe image of the label is attached
The scale factor of the dilationGiven that
D'E' = 36 units
Then, we have
D"E" = 0.9 units
The scale factor is calculated as
Scale factor = D"E"/D'E'
So, we have
Scale factor = 0.9/36
Evaluate
Scale factor = 1/40
So, the scale factor of dilation is 1/40
The coordinates of F"This is calculated as
F = F'/Scale factor
So, we have
F = (36, 15)/(1/40)
F = (1440, 600)
The trigonometry ratiosThe trigonometry ratios are calculated as
sin(D") = EF/DF
cos(D") = DE/DF
tan(D") = EF/DE
So, we have the following approximated values
sin(D") = 15/39 = 0.36
cos(D") = 36/39 = 0.92
tan(D") = 0.36/0.92 = 0.39
Read more about dilation at
brainly.com/question/3457976
#SPJ1
(d) (4 points) suppose it takes a half hour for a red truck to pass through the tunnel. if there are no red trucks in the tunnel when it enters the tunnel at 7:35am on a monday, what is the probability it will be the only red truck in the tunnel the whole time it spends in the tunnel? state the appropriate distribution and any parameter values for any random variable(s) you use to model the situation. write the probability statment and show your work to receive full credit. (e) (5 points) let w represent the amount of time in hours it takes for the 9th red truck to arrive at the tunnel on a monday morning. what time do you expect the 9th red truck to arrive at the tunnel on a monday morning (to the nearest 10 minutes)? recall the tunnel opens at 7am. your final answer should be a time.
(d) The appropriate distribution to use in this situation is the Poisson distribution. We can let X be the number of red trucks that enter the tunnel during the half hour that the first red truck is in the tunnel. The parameter value for the Poisson distribution is λ, which is the average number of red trucks that enter the tunnel in a half hour. We can use the given information to calculate λ:
λ = (average number of red trucks per hour) × (length of time in hours) = (18 red trucks per hour) × (0.5 hours) = 9 red trucks
Therefore, the probability that the first red truck is the only red truck in the tunnel during the half hour it spends in the tunnel is:
P(X = 0) = (λ^0 × e^-λ) / 0! = (9^0 × e^-9) / 0! = (1 × e^-9) / 1 = e^-9 ≈ 0.0001234
So the probability is approximately 0.0001234.
(e) The appropriate distribution to use in this situation is also the Poisson distribution. We can let W be the amount of time in hours it takes for the 9th red truck to arrive at the tunnel on a Monday morning. The parameter value for the Poisson distribution is still λ, which is the average number of red trucks that enter the tunnel per hour. We can use the given information to calculate λ:
λ = (average number of red trucks per hour) = (18 red trucks per hour) = 18 red trucks
The expected value of W is 1/λ = 1/18 hours = 0.0556 hours ≈ 3.33 minutes. Since the tunnel opens at 7am, we can add this expected value to the opening time to find the expected time that the 9th red truck will arrive at the tunnel:
Expected time = 7:00am + 3.33 minutes = 7:03am
So we expect the 9th red truck to arrive at the tunnel at 7:03am on a Monday morning.
To know more about probability refer here:
https://brainly.com/question/30034780
#SPJ11
Time length (in months) of uninterrupted functioning of soil moisture measuring
sensors until failure follows a distribution, 1/7e−x/7. The sensors are inspected at
every 2 months.
(a) What is the probability that the sensors need to be replaced at the first inspection?
(b) What is the probability of proper functioning of the sensors till the second scheduled
inspection? (Ans 0.564)
The probability of proper functioning of the sensors till the second scheduled inspection is `0.564`.
Given that the time length (in months) of uninterrupted functioning of soil moisture measuring sensors until failure follows a distribution, `1/7e−x/7`.The sensors are inspected at every 2 months.(a) Probability that the sensors need to be replaced at the first inspection= Probability that the sensors fail at the first inspection= Probability that the sensors fail before first inspection= Probability that the sensor functioned well up to the first inspection= `F(2) = 1-e^(-2/7)` (Using the given exponential distribution)Therefore, the probability that the sensors need to be replaced at the first inspection is `0.226`. (Approximately, 0.23)(b) The probability of proper functioning of the sensors till the second scheduled inspection is the probability that the sensors do not fail in the first two months. That is, `P(t≥2)` = `1-P(t<2)`= `1-F(2)` = `1-(1-e^(-2/7))` = `0.564`.Therefore, the probability of proper functioning of the sensors till the second scheduled inspection is `0.564`.
Learn more about Functioning
brainly.com/question/12431044
#SPJ4
Answer this ASAP will give the brainliest answer
Given that y = 11 cm and θ = 38°, work out x rounded to 1 DP.
Answer:
6.8 I think
Step-by-step explanation:
Help please !!
WHAT does this mean
The probability that the coin shows heads and the number is two is 0.05.
What is probability?
A probability is a numerical representation of the likelihood or chance that a specific event will take place. Both proportions ranging from 0 to 1 and percentages ranging from 0% to 100% can be used to describe probabilities.
Here, we have
Given: you flip a coin and use a random number generator to generate a number from 1 to 10.
To find the probability, we need to use that we have two independent events. First, flip a coin, and second, generate a number from 1 to 10. They are independent events because their occurrence is not dependent on any other event.
P(A∩B) = P(A).P(B)
Where A represents the event of flipping a coin
B represents the event of generating a number from 1 to 10.
P(A) = 1/2, P(B) = 1/10
P(A) = 0.5 and P(B) = 0.1 we need to replace their values in the initial formula
P(A∩B) = 0.5× 0.1
P(A∩B) = 0.05
Hence, The probability that the coin shows heads and the number is two is 0.05.
To learn more about the probability from the given link
https://brainly.com/question/24756209
#SPJ1
Dave makes $2,300 each month and pays $840 for rent. To the nearest tenth of a percent, what percent of Dave’s earnings are spent on rent?
To calculate the proportion of Dave's wages spent on rent, divide the amount of rent by his monthly earnings and multiply by 100 to obtain the percentage Rent as a percentage of earnings = (Rent / Earnings) x 100%.
When we substitute the provided values, we get: Rent as a percentage of wages = (840 / 2300) x 100% = 36.5% As a result, to the closest hundredth of a percent, Dave spends about 36.5% of his salary on rent. This indicates that rent accounts for around 36.5% of Dave's monthly income. This proportion might provide us with information about Dave's financial status. Financial experts often advise consumers to spend no more than 30% of their income on housing expenditures, including rent and utilities. In Dave's situation, his rent is somewhat higher than the recommended amount. This might signal that he is struggling to make ends meet or that he should look into more cheap housing possibilities. If David can easily pay his existing rent, this percentage may not be a reason for concern.
learn more about percent here:
https://brainly.com/question/28670903
#SPJ4
(NEED HELP ASAP)
What side is opposite from angle B?
What side is adjacent to angle B but is not the hypotenuse?
What side is hypotenuse?
Answer:
Step-by-step explanation:
What side is opposite from angle B? AC
What side is adjacent to angle B but is not the hypotenuse? BC
What side is hypotenuse? AB
The marked price of the mobile set is Rs 2,800 more than the selling price. If the price of the mobile with 13% VAT is Rs 28,476 then find the discount percent given in the mobile.
If the price of the mobile with 13% VAT is Rs 28,476, the discount percent is 10%.
What is the discount?The discount is the difference between the marked price and the selling price.
Discounts are depicted in percentages to show the rates at which the discounts are given.
The selling price of the mobile set with 13% VAT = Rs. 28,476
The selling price of the mobile set without VAT = Rs. 25,200 (Rs. 28,476/1.13)
The difference (discount) between the marked price and the selling price = Rs. 2,800
The marked price = Rs. 28,000 (Rs. 25,200 + Rs. 2,800)
The discount percent given = 10% (Rs. 2,800/Rs. 28,000 x 100)
Thus, we can conclude that the discount percent is 10%.
Learn more about the discount at https://brainly.com/question/12965533
#SPJ1
PLEASE HELP !!!!!!! i really need help!
Answer: Ans b.
Vol_total
= 7800 yd^3
Step-by-step explanation:
The bottom part of your shape is a box, basically (rectangular prism) and the volume is:
V=
length×width×height
Those numbers are all given. Because it is a box shape, it doesn't matter which number is which.
V = 22 × 15 × 16
= 5280 yd^3
Now the "roof" part on top is a little bit different. It is a triangular prism. So the side that needs to be the Base of the prism is the front (or back) triangle.
The volume is:
V
= BaseArea×height
= Area_triangle× ht
= 1/2 bh × height
= 1/2•21•16 × 15
The key to understanding is knowing the triangle must be the base. And the roof line running front to back will be the height. And also understanding the difference between the height of just a triangle (21) and the height of the prism(15). They are different.
Vol_roof = 2520
Then add them together.
Vol_total
= 5280 + 2520
= 7800 yards cubed
PLEASE HELP IMMA DIE IF I GET THIS WRONG (im over exaggerating
)
In the given triangle, The value of x will be 6.
What exactly is a triangle?
A triangle is a closed two-dimensional geometric shape that is formed by three straight line segments that connect three non-collinear points. The three line segments that form a triangle are called sides, and the three points where the sides intersect are called vertices.
Triangles can be classified into six types. A triangle with all three sides of equal length is called an equilateral triangle, while a triangle with two sides of equal length is called an isosceles triangle. A triangle with all three angles measuring less than 90 degrees is called an acute triangle, while a triangle with one angle measuring exactly 90 degrees is called a right triangle. A triangle with one angle measuring more than 90 degrees is called an obtuse triangle.
Now,
For given triangle,
The angle bisector is perpendicular to the line having x.
As it divided angle into same ratio then the ratio
[tex]x/5[/tex]=[tex]12/10[/tex]
then x=6/5*5
x=6
Hence,
The measurement of side x will be 6.
To know more about triangles visit the link
brainly.com/question/2773823
#SPJ1
What fraction times 4 1/3 is equal to 6 1/2?
Answer:
3/2
Step-by-step explanation:
4 1/3 = 13/3
6 1/2 = 13/2
fraction x 13/3 = 13/2
=> fraction = 13/2 / 13/3 = 13/2 x 3/13 = 3/2
After Angela drank 390 millilitres of soup from a can of the soup was left in the can. How much soup was in the can at first?
The volume of soup in the can at first is 546 millilitres.
How to find the amount of soup in the can?Angela drank 390 millilitres of soup from a can of the soup. 2 / 7 of the soup was left in the can after drinking the soup.
Therefore, the amount of soup in the can at first can be calculated as follows:
let
x = amount of soup initially in the can
Therefore, using equation let's find the volume of soup initially in the can.
2 / 7 x + 390 = x
390 = x - 2 / 7 x
390 = 7x - 2x / 7
390 = 5x / 7
cross multiply
5x = 390 × 7
5x = 2730
divide both sides by 5
x = 2730 / 5
x = 546
Therefore,
volume of soup in the can = 546 millilitres
learn more on volume here: https://brainly.com/question/3195663
#SPJ1