the distribution of test scores shows that most students did not do well on the test; some did fine and only a few did exceedingly well. the distribution is likely to be .

Each student should receive 1/2 kg of soil.

To find out how much soil each student will have, we need to first add up the total amount of soil collected and then divide it equally among the 10 students.

Let's start by converting all the amounts of soil to a common unit, such as kilograms:

3 students brought 1/4 kg each, so they brought a total of 3/4 kg.

4 students brought 1/2 kg each, so they brought a total of 2 kg.

3 students brought 3/4 kg each, so they brought a total of 2 1/4 kg.

Adding up these amounts, we get:

3/4 + 2 + 2 1/4 = 5 kg

So the total amount of soil collected is 5 kg.

To redistribute this soil equally among the 10 students, we need to divide it by 10:

5 kg ÷ 10 = 1/2 kg per student

Therefore, each student should receive 1/2 kg of soil.

To know more about Average visit:

brainly.com/question/24057012

#SPJ1

8. Spread = SD = sqrt(2*df)

9. The difference between the observed and expected frequencies of the outcomes of a set of events or variables.

10. Degrees of 1 freedom does the chi-square distribution.

11.  The rule of thumb for all expected counts in a chi-square goodness of fit test is expected counts must be at least 5.

8. Describe the center and spread of the chi-square distributions.

Shape - skewed right because can't be zero

µ = df = tipping point

mode = df - 2 = peak

spread = SD = sqrt(2*df)

9. Chi-square test is a non-parametric test (a non-parametric statistical test is a test whose model does not specify conditions about the parameter of the population from which the sample is drawn.). It is used for identifying the relationship between a categorical variable and denoted by χ2.

10. A chi-squared distribution constructed by squaring a single standard normal distribution is said to have 1 degree of freedom. Thus, as the sample size for a hypothesis test increases, the distribution of the test statistic approaches a normal distribution.

11. The rule of thumb for all expected counts in a chi-square goodness of fit test is expected counts must be at least 5.

Learn more about Chi- square distribution at:

https://brainly.com/question/30259945

#SPJ4

The circumference of Circle C is found as 53π.

In the given figure:

AD = 28 and DB = 45

∠ADB = 1/2 *∠ACB

∠ADB = 90

Applying Pythagorean theorem in ΔABD.

AB² = AD² + DB²

AB² = 28² + 45²

AB = √2809

AB = 53

Radius = 53/2

circumference of Circle C:

C = 2πr

C = 2*π* (53/2)

C =  53π

Thus, the circumference of Circle C is found as 53π.

know more about the circumference of Circle

https://brainly.com/question/23986334

#SPJ1

The area of the polygon with vertices P(1,2), Q(1,4), R(-1,6), and S(-3,2) is given as 10 units. Option B

We can find the area of the polygon with the given vertices by dividing it into triangles and adding their areas.

One way to divide the polygon into triangles is to draw a diagonal from vertex P to vertex R. This creates two triangles, PQR and PRS.

[tex]\frac{1 }{2} ((4 - 2) + (6--4) + (-2 - - 18) + (-6 - 2)[/tex]

= 1 / 2 ( 2 + `10 + 16 - 8)

= 1 / 2 ( 20

= 10

The area of the polygon is 10 units

Read more on polygons here:https://brainly.com/question/1592456

#SPJ1

Answer:33

Step-by-step explanation:45-12=33

Answer:

Step-by-step explanation:

Circle centre: (4,7)

Radius: 3

Equation is:

  [tex](x-h)^2+(y-k)^2=r^2[/tex]   (where (h,k) is center, r is radius)

  [tex](x-4)^2+(y-7)^2=3^2[/tex]

  [tex](x-4)^2+(y-7)^2=9[/tex]     (This is the general standard form )

in expanded form,

  [tex](x^2-8x+16)+(y^2-14y+49)=9[/tex]

  [tex]x^2+y^2-8x-14y+56=0[/tex]

Note: Unless stated either form is an acceptable answer.

The length of each arc intercepted by each slice is 2.09 inches.

The area of each slice 18.85 square inches .

To find the length of each arc intercepted by each slice and the area of each slice of a pizza that is 12 inches in diameter, follow the steps below. Length of each arc intercepted by each slice

The formula to find the length of each arc is given by:

L = θ/360 * 2πr

WhereL = length of arc

θ = angle of arc in degrees

r = radius of circle (diameter/2)

Given, diameter of pizza = 12 inches

So, radius of pizza = 12/2 = 6 inches

Since the pizza is cut into 6 equal slices, each slice will have an angle of 360/6 = 60 degrees.

Now, substituting the given values in the formula:

L = 60/360 * 2π* 6L = 1/6 * 12πL = 2π/3 ≈ 2.09 inches

The formula to find the area of each slice is given by:

A = θ/360 * πr²

Given, diameter of pizza = 12 inches

So, radius of pizza = 12/2 = 6 inches

Since the pizza is cut into 6 equal slices, each slice will have an angle of 360/6 = 60 degrees.

Now, substituting the given values in the formula:

A = 60/360 * π* 6²A = 1/6 * 36π

A = 6π ≈ 18.85 square inches

Thus, the length of each arc intercepted by each slice is approximately 2.09 inches and the area of each slice is approximately 18.85 square inches.

You can learn more about  circular area at

https://brainly.com/question/10645610

#SPJ11

Answer:

(2, 180)

Step-by-step explanation:

w(x)=-5x^2+20x+160

a=-5 b=20

x=-20/2x(-5)

x=2

w(2)=180

2, 180

Answer:

Step-by-step explanation:

asdf

The conditions does the function f(x) to meet in order to be able to use the integral test to verify convergence or divergence is

1) f(x) must be continuous, positive, and decreasing for all x greater than some fixed value N.

2) The series to be tested must have non-negative terms.

3) The integral of f(x) from N to infinity must converge or diverge.

To use the integral test to verify the convergence or divergence of an infinite series, the following conditions must be met for the function f(x)

1) f(x) must be continuous, positive, and decreasing for all x greater than some fixed value N.

2) The series to be tested must have non-negative terms.

3) The integral of f(x) from N to infinity must converge or diverge.

If these conditions are met, then the integral test can be used to determine whether the series converges or diverges. Specifically, if the integral of f(x) converges, then the series converges. On the other hand, if the integral of f(x) diverges, then the series also diverges.

Learn more about integral test here

brainly.com/question/28157842

#SPJ4

The length of the minute hand of the clock is given as follows:

10.6 inches.

Suppose that we have two points of the coordinate plane, and the ordered pairs have coordinates [tex](x_1,y_1)[/tex] and [tex](x_2,y_2)[/tex].

The shortest distance between them is given by the equation presented as follows, derived from the Pythagorean Theorem:

[tex]D = \sqrt{(x_2-x_1)^2+(y_2-y_1)^2}[/tex]

The ordered pairs for this problem are given as follows:

(0,0) and (7.5, 7.5).

Hence the distance between the two points, representing the length of the minute hand, is given as follows:

d = sqrt(7.5² + 7.5²)

d = 10.6 inches.

More can be learned about the distance between two points at https://brainly.com/question/7243416

#SPJ1

Answer:

3

Step-by-step explanation:

Number of people in the choir = 80

Number of women = half of 80 = 40

Number of men in the choir is ¼ of the women = 40/4 = 10

Number of men plus women = 10 +40 = 50

Number of children = 80 - 50 = 30

Ratio of children to men = n:1 = 30:10

Divide both sides by 10

30:10 = 3:1

n = 3

Therefore , the solution of the given problem of unitary method comes out to be hourly salary of $144, or 12 times the average hourly wage of $12 for phone reps.

This common convenience, already-existing variables, or all important elements from the original Diocesan adaptable study that followed a particular methodology can all be used to achieve the goal. Both of the crucial elements of a term affirmation outcome will surely be missed if it doesn't happen, but if it does, there will be another chance to get in touch with the entity.

Here,

The formula below can be used to determine the ideal amount of phone representatives:

=>  MR = MC

Where n is the amount of phone reps and 12 is their hourly wage, the cost is given by C = 12n.

The following results are obtained by taking the derivative of revenue and cost with regard to n:

=> MR=dR/dn = k

=>  dC/dn = 12 for MC.

When we set MR equal to MC, we obtain:

=> k = 12

Accordingly, Vi should hire as many phone representatives as are required to produce an hourly salary of $144, or 12 times the average hourly wage of $12 for phone reps.

To know more about unitary method  visit:

https://brainly.com/question/28276953

#SPJ1  

The length of dDC is 16 cm. We can use the similarity of triangles ACD and ABE to find the length of DC.

We know A,B and c lie on a straight line segment A , E and d lie on a straight line segment

Substituting the given values, we get:

Simplifying the equation, we get:

AD = 20

Now, we can use the similarity of triangles ACD and ABE again, to find the length of DC.

CD/BE = AD/AE

Substituting the values, we get:

CD/4 = 20/(20+5)

Simplifying the equation, we get:

CD = 16

Therefore, the length of dDC is 16 cm.

Learn more about straight-line segment

https://brainly.com/question/28669800

#SPJ4

The two numbers are 6 and 2.

Let's assume the first number is x and the second number is y.

From the first statement, we can write the equation x = y + 4.

From the second statement, we can write the equation 2x = 4y + 2.

Now, we can substitute x in terms of y from the first equation into the second equation:

2(y + 4) = 4y + 2

Simplifying this equation, we get:

2y + 8 = 4y + 2

2y = 6

y = 3

Substituting y = 3 in the first equation, we get:

x = y + 4 = 3 + 4 = 7

Therefore, 6 and 2 are the two numbers,


To know more about equations refer here:

https://brainly.com/question/29657983#

#SPJ11

The standard deviation for the number of people with the genetic mutation in a group of 1000 individuals is approximately 4.89.

To find the standard deviation for the number of people with a particular genetic mutation in a group of 1000 individuals, we first need to understand the concept of binomial distribution.

Binomial distribution is a statistical probability distribution that represents the number of successes in a fixed number of independent trials, where each trial has only two possible outcomes (success or failure).

In this case, the probability of success (having the genetic mutation) is 0.04, and the probability of failure (not having the mutation) is 0.96. Thus, we can model the number of people with the mutation in a group of 1000 individuals using a binomial distribution with n = 1000 and p = 0.04.

The formula for the standard deviation of a binomial distribution is:

σ = √(np(1-p))

Where σ is the standard deviation, n is the number of trials, and p is the probability of success. Plugging in the values, we get:

σ = √(1000 x 0.04 x 0.96) = 4.89

In other words, we can expect that the number of people with the genetic mutation in a group of 1000 individuals will vary around the mean of 40 (1000 x 0.04) by about 4.89, with about 68% of the observations falling within one standard deviation of the mean.

To learn more about standard deviation click on,

https://brainly.com/question/13802447

#SPJ4

Answer:

angle "E" =70°

Step-by-step explanation:

<ABC=<ADC

<ADC=<EAD (alternate angles)

<EAD=<DEA (because /DA/=/DE/

and <DEA=angle E, therefore answer=70°

In linear equation, The actual height of the statue is 300 feet.

What in mathematics is a linear equation?

An algebraic equation with simply a constant and a first-order (linear) term, such as y=mx+b, where m is the slope and b is the y-intercept, is known as a linear equation. Sometimes, the aforementioned is referred to as a "linear equation of two variables," where x and y are the variables.  

                                  Equations with variables of power 1 are referred to as linear equations. One example with only one variable is where ax+b = 0, where a and b are real values and x is the variable.

A scale factor of a famous statue uses a scale factor of 250:1. If the height of the drawing is 1.2 feet, what is the actual height of the statue?

= 1.2 x 250

The actual height of the statue is 300 feet.

Learn more about linear equation

brainly.com/question/11897796

#SPJ1

Answer:(D) 300

Step-by-step explanation: the scale factor is 250:1 and the Hight of the drawing is 1.2 feet you need to multiply 1.2 by 250

1.2 x 250 = 300

The volume of the ball is 9π (optionC)

A sphere is symmetrical, round in shape. It is a three dimensional solid, that has all its surface points at equal distances from the center.

The ball takes the shape of the sphere. The volume of a sphere is therefore calculated as ;

V = 4/3 πr³

r = d/2 = 3.8/2 = 1.9

V = 4/3 × π × 1.9³

V = 27.44 π/3

V = 9π ( nearest whole number)

therefore the volume of the ball is 9π (nearest whole number)

learn more about volume of a sphere from

https://brainly.com/question/10171109

#SPJ1

48 is  length of chord AC.

How is a chord defined?

Three or more notes come together to form a chord. A single note, referred to as the root, serves as the foundation for chords. Triads will be covered in this lesson.

                         A root, third, and fifth are used to make them. A line segment connecting two locations on the circle's circumference is what is referred to as the chord of a circle. The diameter, which runs through the centre of the circle, is the lengthiest chord of the circle.

since OD intersects AB to form a right angle at point B, so it bisects the chord AC.

so AB = BC      (1)

given AB = 7x - 4

and CB = 6x  

from (1) we have

7x - 4 = 6x

x = 4

so AB = 7(4) - 4 = 24

CB = 6(4) = 24

length of chord AC = AB + BC = 24 + 24 = 48

Learn more about chord

brainly.com/question/8944240

#SPJ1

The complete question is -

Segment OD intersects AB to form a right angle at point B.

If AB = 7x - 4 and CB = 6x, what is the length of the chord AC?

The point that partitions segment AB in a 1:4 ratio is (-1, -0.4).

In this scenario, line ratio would be used to determine the coordinates of the point Q on the directed line segment AB that partitions the segment into a ratio of 1 to 4.

In Mathematics, line ratio can be used to determine the coordinates of Q and this is modeled by the following mathematical expression:

Q(x, y) = [(mx₂ + nx₁)/(m + n)],  [(my₂ + ny₁)/(m + n)]

Substituting the given parameters into the line ratio formula, we have;

Q(x, y) = [(1(7) + 4(-3))/(1 + 4)],  [(1(-10) + 4(2))/(1 + 4)]

Q(x, y) = [(7 - 12)/(5)],  [(-10 + 8)/5]

Q(x, y) = [-5/5],  [(-2)/(5)]

Q(x, y) = [-1, -2/5]

Q(x, y) = [-1, -0.4]

Read more on line ratio here: brainly.com/question/14457392

#SPJ1

Answer:

Step-by-step explanation:

Let's call the length of the shorter leg of the isosceles trapezoid "a" and the length of the longer leg "b".

From the problem, we know that:

a = 0.1x - 0.5 (length of one leg is 0.1.x - 0.5 meters)

b = 0.3x - 2.1 (length of the other leg is 0.3.x-2.1 meters)

Since we know that the trapezoid is isosceles, we know that a = b. So we can set the two expressions equal to each other:

0.1x - 0.5 = 0.3x - 2.1

Now we can solve for x:

0.2x = 1.6

x = 8

Now that we know x, we can substitute it back into the expressions for a and b to find their lengths:

a = 0.1(8) - 0.5 = 0.3 meters

b = 0.3(8) - 2.1 = 0.3 meters

Therefore, each of the legs of the solar panel are 0.3 meters long.

The characteristics of each function has been explored based on the table below.

The graph of each function is shown in the image attached below.

In order to use the given functions to complete the table, we would have to substitute each of the values of x (x-values) into the function and then evaluate as follows;

A. f(x) = 2x

x                      process             f(x)

-2                  f(-2) = 2(-2)            -4

-1                   f(-1) = 2(-1)              -2

0                   f(0) = 2(0)               0

1                    f(1) = 2(1)                 2

2                   f(2) = 2(2)                4

B. G(x) = x²

x                      process             f(x)

-2                  f(-2) = (-2)²            4

-1                   f(-1) = (-1)²              1

0                   f(0) = (0)²               0

1                    f(1) = (1)²                 1

2                   f(2) = (2)²               4

B. H(x) = 2ˣ

x                      process             f(x)

-2                  f(-2) = (2)⁻²            1/4

-1                   f(-1) = (2)⁻¹              1/2

0                   f(0) = (2)⁰                1

1                    f(1) = (2)¹                 2

2                   f(2) = (2)²               4

In this scenario and exercise, we would use an online graphing calculator to plot each of the given functions as shown in the graph attached below.

Read more on linear function here: brainly.com/question/27325295

#SPJ1

To locate the stations and draw cirradius cles on the map of California, follow these steps:

1. Identify the city stations on the map: Find the city stations indicated on the map, such as San Francisco, Los Angeles, and San Diego.

2. Use a compass: Set your compass to the scale provided on the map.

For example, if the scale says 1 inch = 100 km, adjust your compass accordingly.

3. Determine the distance from the epicenter: Based on the information provided, determine the distance from each city station to the epicenter. If it is not provided, refer to additional resources or data.

4. Draw the circles: Place the compass point on each city station and draw a circle with a corresponding to the distance determined in

step 3. Ensure the radius is in scale with the map.

5. Identify the epicenter: The point where all the circles intersect is the approximate location of the epicenter.

for such more questions on radius

https://brainly.com/question/24375372

#SPJ11

The angle of x in the given circle is 51 degrees.

In the case when a tangent line and a secant line originate from the same external point, the mean of the exterior angle is equal to half the difference between the major arc and the minor arc that are created by the tangent and secant lines.

From the given figure we observe that the secant line and tangent line start from the same exterior angle.

Thus, according to the theorem of secant and tangent line of circle we have:

angle x = (DA - DB) /2

angle x = (178 - 76) / 2

angle x = 102 /2

angle x = 51 degrees.

Hence, the angle of x in the given circle is 51 degrees.

Learn more about secant line here:

https://brainly.com/question/30162653

#SPJ1

The expression (1 + 1 / 18)¹⁸ represents the number closest to irrational number e. (Correct choice: A)

This problem ask us to determine what expression is closest to irrational number e. A number is irrational when it cannot be represented by numbers of the form m / n, where m and n are integers and n is non-zero. The number e can be defined by the following limit:

[tex]e = \lim_{x \to \infty} \left(1 + \frac{1}x}\right)^{x}[/tex], where x is a natural number.

According to this definition, the greater the value of x is, the closer the result to irrational number e is. Therefore, the following expression is closest to the given irrational number:

x = 18

e = (1 + 1 / 18)¹⁸

To learn more on irrational numbers: https://brainly.com/question/2197288

#SPJ1

The nature of formula (Permutations or Combinations) for each scenario is the following:

1) Permutations ; 2) Combination

3) Combination ; 4) Permutations

5)Permutations ; 6)Combination

7) Combination ; 8)Combination 9)Combination ; 10)Combination.

Permutations formula: Permutation is considered an ordered combination. The general formula for this is,

P(n, r) = n! /(n-r)!

Combination formula: It is considered arrangement ways but without ordered combination. The general formula for this is C(n, r) = n!/ (n-r)! r!

Now, we have provide some situations and we have to resolve them.

1) Determining the top three winners ing Science Quiz have to Bee is an example of Permutation as here we just arrange the position for top winners.

2) Forming lines from six given points with no three of which are collinear, is an example of combination because only pair of points is needed.

3) It will be a combination as here we select 3 points to make a triangle user.

4) Four people posing for pictures is an example of Permutation as oder does not matter.

5) Assembling a jigsaw puzzle is an example of Permutations.

6) As here we choose 2 household chores so it is a combination.

7) Selecting 5 basketball players out of 10 team members for the different positions members it is a combination.

8) Choosing three friend for birthday party is combination formula.

9) Picking 6 balls from a basket by 12 balls is combination formula.

10) Forming a committe of 5 members from do people 20 combinations people.

For more information about permutations and combinations, visit :

https://brainly.com/question/29594894

#SPJ4

Complete question:

P- Permutations or C- Combinations.

1. Determining the top three winners in a Science Quiz Bee

2. Forming lines from six given points with no three of which are collinear

3. Forming triangles from 7 given points with no three of which are collinear

4. Four people posing for pictures

5. Assembling a jigsaw puzzle

6. Choosing 2 household chores to do before dinner

7. Selecting 5 basketball players out of 10 team members for the different positions

8. Choosing three of your classmates to attend your party

9. Picking 6 balls from a basket of 12 balls

10. Forming a committee of 5 members from 20 people

Since GM is tangent tο circle O at pοint G, the intercepted arc GE has measure zerο. ,then ∠SGM = 84°.

Secant line is alsο knοwn as average rate οf change οf functiοns between twο pοints and alsο called slοpe.

the tangent line is perpendicular tο the radius that passes thrοugh the pοint οf tangency. Therefοre, we have:

m∠MGS = 90°

Alsο, we knοw that the measure οf an angle fοrmed by a tangent line and a secant line that intersect οutside the circle is half the difference οf the intercepted arcs.

m∠SGM = 1/2 (mSE - mGE)

where SE is the intercepted arc by secant GS, and GE is the intercepted arc by tangent GM.

Since GM is tangent tο circle O at pοint G, the intercepted arc GE has measure zerο.

mSE = 2mGS

mSE = 2(84°) = 168°

m∠SGM = 1/2 (mSE - mGE) = 1/2 (168° - 0°) = 84°

Therefοre, m∠SGM = 84°.

To knοw more about secant line visit,

https://brainly.com/question/14438198

#SPJ1

The distance from each landing point to the boat pulled ashore at point C is given by:-d = sqrt(25^2 (y^2/x^2 + 1))

WHAT IS TRIGONOMETRY ?

Trigonometry is a branch of mathematics that deals with the study of the relationships between the sides and angles of triangles. It is used to solve problems involving distances, heights, angles, and other geometric measurements. Trigonometric functions such as sine, cosine, and tangent are used to relate the angles of a triangle to its sides. Trigonometry has many practical applications in fields such as engineering, physics, and architecture, and is essential for understanding and solving problems involving waves, oscillations, and periodic phenomena. It is also used in navigation, surveying, and astronomy, among other areas.

To solve this problem, we need to use the concept of right triangle trigonometry.

Let's assume that point C is directly opposite the midpoint of AB, and that the distance from point C to the midpoint of AB is x. Then we can draw a right triangle with legs of length x and 25 (half of 50) and a hypotenuse of length d (the distance from point C to each landing point).

Using the Pythagorean theorem, we can write:

d^2 = x^2 + 25^2

We also know that the angles opposite the legs of the right triangle are complementary, so we can use the tangent function to write:

tan(theta) = x/25

where theta is the angle between the hypotenuse and the side of length 25.

We can rearrange this equation to solve for x:

x = 25 tan(theta)

Now we can substitute this expression for x into the equation for d^2:

d^2 = (25 tan(theta))^2 + 25^2

Simplifying this equation, we get:

d^2 = 25^2 (tan^2(theta) + 1)

Finally, we can use the fact that tan(theta) is equal to the height of the opposite bank divided by the distance from point C to the midpoint of AB. Let's call this distance y. Then we have:

tan(theta) = y/x

Substituting this expression for tan(theta) into the equation for d^2, we get:

d^2 = 25^2 (y^2/x^2 + 1)

So the distance from each landing point to the boat pulled ashore at point C is given by:

d = sqrt(25^2 (y^2/x^2 + 1))

where x and y are the distances from point C to the midpoint of AB and the opposite bank, respectively.

To know more about Trigonometry visit :-

https://brainly.com/question/13729598

#SPJ1