The smallest unit of life that can sustain itself is called an organism or an biosphere or a population

Answer: The pH of a 0.138 M solution of H3PO4 (assuming complete dissociation for the sake of the example) is 1.49.

The following steps can be used to determine the pH of the solution.

Phosphoric acid is a triprotic acid, which means that it can donate three hydrogen ions (H+) to a solution. Phosphoric acid's first dissociation reaction is as follows:

H3PO4(aq) → H+(aq) + H2PO4-(aq) This means that in water, H3PO4 will donate one hydrogen ion (H+) to the solution, leaving behind the negatively charged H2PO4- ion.

To determine the pH of the solution, we can use the formula:

pH = -log[H+]

First, we need to determine the concentration of H+ ions in the solution, which we can find from the dissociation of H3PO4. H3PO4(aq) → H+(aq) + H2PO4-(aq) Initially, the concentration of H3PO4 is 0.138 M. Since we're assuming complete dissociation for the sake of this example, we can say that 100% of the H3PO4 dissociates into H+ and H2PO4-.

This means that the concentration of H+ in the solution is equal to the initial concentration of H3PO4:0.138 MWe can now substitute this value into the pH formula:

pH = -log[H+]pH = -log[0.138]pH = 1.49

Therefore, the pH of the 0.138 M solution of H3PO4 (assuming complete dissociation for the sake of the example) is 1.49.

Learn more about ph level here:

https://brainly.com/question/1458045#

#SPJ11

The aqueous solution with the lowest % ionization will be 0.5 m Ba(OH)2. This is because the dissociation of Ba(OH)2 is the least among all the solutions, making it the least ionized.

Explanation: The 0.5 M Ba(OH)2 aqueous solution will have the lowest % ionization.Based on the given options, the lowest % ionization will be observed in 0.5 M Ba(OH)2 aqueous solution. Here's why:Acids and bases are classified as weak or strong depending on the extent to which they ionize when dissolved in water. The stronger the acid or base, the greater the degree of ionization when it dissolves in water. This is because strong acids and bases are nearly completely ionized in solution. Aqueous solution of HF and HCl:HF is a weak acid, and HCl is a strong acid. As a result, HCl is more acidic than HF, with a greater degree of ionization. NaOH aqueous solution:NaOH is a strong base, which means that it completely ionizes in water. Ba(OH)2 and Sr(OH)2 aqueous solutions:Ba(OH)2 and Sr(OH)2 are both strong bases, but the degree of ionization depends on their concentration. A solution of 1 M Ba(OH)2 is 50% ionized, whereas a solution of 1 M Sr(OH)2 is 80% ionized. So, among the given options, the 0.5 M Ba(OH)2 aqueous solution will have the lowest % ionization.

For more such questions on ionization

https://brainly.com/question/20658080

#SPJ11

The volume (in liters) in which 9.87 moles of ozone, O₃ can occupy is 221.09 liters

From the question given above, the following data were obtained:

The volume of 9.87 moles of ozone, O₃ can be obtained as illustrated below:

From the ideal gas theory, we understood that:

1 mole of ozone, O₃ = 22.4 Liters

Therefore,

9.87 moles of ozone, O₃ = (9.87 moles × 22.4 Liters) / 1 mole

9.87 moles of ozone, O₃ = 221.09 liters

Thus, we can conclude that the volume is 221.09 liters

Learn more about volume:

https://brainly.com/question/225322

#SPJ1

In order to make a solution that is 1.5ppm in fluoride ion using sodium fluoride (NaF), 750L of water needs to be added to 0.22g of NaF.

Mass of NaF (g) = Concentration of F (ppm) x Volume of Water (L) / 1,000,000.

NaF mass = 1.5ppm x 750L / 1,000,000.

Since the atomic weight of NaF is 41.99, 0.22g is equivalent to 0.00518mol NaF.

The molarity (M) of the solution,

Molarity (M) = Moles of Solute (mol) / Volume of Solution (L)

Molarity 0.00518mol / 750L = 0.000068M.

Therefore, 0.22g of NaF should be added to 750L of water to make a solution that is 1.5ppm in fluoride ion.

to know more about sodium fluoride refer here:

https://brainly.com/question/2807538#

#SPJ11

The blank can be filled with the term "shielding gas."Shielding gas protects the molten weld pool, the filler rod, and the tungsten electrode as they cool to a temperature at which they will not oxidize rapidly.

What is a shielding gas? A shielding gas is a gas that is employed in gas welding processes to safeguard the weld area from contamination. Welding processes that use shielding gases are referred to as gas metal arc welding or gas tungsten arc welding, among other things. What is the purpose of shielding gas in welding? The primary goal of shielding gas in welding is to defend the molten weld pool, the filler rod, and the tungsten electrode from being contaminated. When the shielding gas is utilized, it forms a sort of barrier that protects the weld from the air and other contaminants. In essence, the shielding gas creates a shield for the welding process that protects the molten weld pool from getting contaminated. As a result, the use of shielding gas is critical in ensuring that the welding process results in high-quality welds.

Learn more about molten weld pool at  brainly.com/question/30024003

#SPJ11

The correct answer is The given reaction is:

[tex]CO2 (aq) + H2O (l) ⇌ H2CO3 (aq)[/tex]

The equilibrium constant for this reaction in seawater is about 1.2 x 10^-3. This means that at equilibrium, the ratio of the product concentrations (H2CO3) to the reactant concentrations (CO2 and H2O) is [tex]1.2 x 10^-3.[/tex]Let's assume that the concentration of CO2 in solution is 0.10 moles per liter. Since we know the equilibrium constant, we can use it to calculate the concentration of carbonic acid (H2CO3) at equilibrium. The equilibrium expression for this reaction is [tex]Kc = [H2CO3] / [CO2] [H2O][/tex]Since water is a liquid, it is not included in the equilibrium constant expression for aqueous solutions and can be excluded. Therefore, we can simplify the expression to: [tex]Kc = [H2CO3] / [CO2][/tex]We know the value of Kc and the concentration of CO2, so we can rearrange the equation and solve for the concentration of H2CO3:

[tex][H2CO3] = Kc x [CO2][/tex]

[tex][H2CO3] = (1.2 x 10^-3) x (0.10 mol/L)[/tex]

[tex][H2CO3] = 1.2 x 10^-4 mol/L\\[/tex]

Therefore, at equilibrium, the concentration of carbonic acid in the solution will be 1.2 x 10^-4 moles per liter.

To learn more about  reaction click on the link below:

#SPJ1

The solution to precipitate the barium ion, Ba²⁺, in a water sample is sodium sulfate.

The expected precipitate is BaSO4, or barium sulfate. Barium sulfate is an insoluble salt, which means that when sodium sulfate is added to the water sample, barium sulfate will form and settle out of the solution.

Sodium sulfate reacts with barium ions in the water sample to form the insoluble salt BaSO4 according to the following equation: Ba²⁺ + SO4²⁻ --> BaSO4. Since BaSO4 is insoluble in water, it will settle out of solution.

This process is known as precipitation. Precipitation occurs when a soluble compound is converted to an insoluble one.

To know more about Precipitation click on below link:

https://brainly.com/question/18109776#

#SPJ11

1) protons: 3

they're positive so they go in the middle

2) atomic mass (rounded): 7 minus the atomic number (7-4)=3 neurons

as neutrons are neither negative or positive they go in the middle as well

3) electrons: 3

the number of electrons is the same as protons so 3. they go on the outside as they are negative. Electrons never go in the center

27.7% of the compound remains after 2.96 minutes.

Decomposition is the breakdown of a molecule into smaller molecules or elements. It is the reverse of a chemical reaction. The rate of decomposition of a compound can be determined by a first-order reaction.

The first-order rate constant is a measure of how quickly a compound decomposes over time. It is represented by the letter k.

In a first-order reaction, the rate of decomposition is proportional to the concentration of the compound.

The equation is given as follows:Rate = -k[A]Where k is the rate constant, and [A] is the concentration of the compound. The negative sign represents the decrease in concentration of the compound over time.

Equation gives the following:ln[A]t = -kt + ln[A]0Where ln is the natural logarithm, [A]t is the concentration of the compound at time t, and [A]0 is the initial concentration of the compound.

Rearranging this equation gives the following:A = A0e-kttWhere A is the concentration of the compound at time t, and A0 is the initial concentration of the compound.

The percentage of the compound that remains after a given amount of time can be determined by dividing the concentration of the compound at that time by the initial concentration and multiplying by 100.

The equation is given as follows:% remaining = (A/A0) x 100

Where % remaining is the percentage of the compound that remains, A is the concentration of the compound at time t, and A0 is the initial concentration of the compound.

We can use the given data to determine the percentage of the compound that remains after 2.96 minutes. The rate constant is given as k = 0.00729 sec-1.

Therefore, the equation for the concentration of the compound at time t is:A = A0e-ktt, we get:A = A0e-0.00729(2.96 x 60)A = A0e-1.303

Therefore, the percentage of the compound that remains is:% remaining = (A/A0) x 100% remaining = (e-1.303) x 100% remaining = 27.7%Therefore, 27.7% of the compound remains after 2.96 minutes.

to know more about compound refer here:

https://brainly.com/question/13516179#

#SPJ11

Methane is a simple compound, formed by one atom of carbon and four atoms of hydrogen (CH4). Methane exists as a gas in the environment and is one of the most important fossil fuels for human society. When the methane molecule breaks down, it produces heat. Because of this property, some of our homes are fueled by methane gas, which is used to cook, heat our water, and fuel our furnaces and fireplaces. Methane can also be collected and transformed into electricity, serving as a natural energy source. Methane is also found in animal burps and farts (yes, you read correctly, farts!). Methane is one of the most abundant gases produced in the digestive tract as food is broken down. To summarize, methane is a common atmospheric gas. Remarkably, methane production and breakdown on Earth are processes driven mainly by microorganisms.

Microorganisms (microbes)Very small forms of life including bacteria, fungi, and some diminutive algae. are the smallest life forms known, invisible to unaided eyes. They are found in all habitats and ecosystems on Earth, in our daily surroundings as well as the most hostile and extreme habitats. Although they are extremely small, the diversity and abundance of microorganisms are enormous and remarkable. Recent estimates predict that 90–99% of the microbial species on Earth are still undiscovered [1]. Microbes are the major players in the recycling of organic matterAll cells and substances made by living organisms, including living and dead animals and plants. and important nutrients on Earth. They also regulate the production and breakdown of some atmospheric gases, including carbon dioxide, the oxygen we breathe, and of course, methane.

Methane has drawn the attention of the scientific community because its concentration in the atmosphere has almost tripled, since the Industrial Revolution began in the eighteenth century. Importantly, some studies indicate that these recent increases in atmospheric methane are happening more quickly as compared to geological time scales. Suggesting the influence of human activities associated to methane emissions. The problem with increased methane in the atmosphere is that, methane gas has the ability to trap the heat energy from the Sun and prevent this heat energy from returning to space, resulting in something known as the green-house effect. This heat-trapping capacity is very important, because it helps the Earth to stay warm enough to sustain life [2]. However, too much methane accumulation impacts the climate and contributes to global warming. Today, the methane cycle is a major research topic, since we need a deeper understanding of where all the methane on earth comes from and how it is transformed.

Therefore, the concentration of Pb2+ ions in the solution is 0.0098 M. The chemical equation describing how lead (II) chloride dissolves in water Pb2+ (aq) + 2Cl- PbCl2 (s) (aq) For this reaction.

Ksp = [Pb2 +] [Cl -] 2 We are provided that the Ksp value of PbCl2 is 1.7 × 10^-5. Also, we are informed that 0.90 moles of Cl- ions have been added to the mixture. We may assume that the concentration of Pb2+ ions is insignificant compared to the concentration of Cl- ions since the stoichiometry of the reaction is 1:2 for Pb2+:Cl-. Let x be the concentration of Pb2+ ions in the solution. Then, the concentration of Cl- ions is 2x (because the stoichiometry is 1:2 for Pb2+:Cl-). The total concentration of Cl- ions in the solution is therefore:

[Cl-]total = 2x + 0.90

Since the solubility product expression for[tex]PbCl2 is Ksp = [Pb2+][Cl-]^2, \\[/tex]we can write:

[tex]Ksp = x(2x + 0.90)^2Solving for x, we get:x = 0.0098 M[/tex]

Therefore, the concentration of Pb2+ ions in the solution is 0.0098 M.

learn more about chemical equation here:

https://brainly.com/question/30087623

#SPJ4

Answer:

Explanation:

The statement mentioned in the question is not a question. However, I can provide some information related to the given statement.Nickel(II) chloride refers to the chemical compound with the formula NiCl2. It is also known as Nickelous chloride. When nickel(II) chloride is dissolved in water, it forms a saturated solution of concentration 1 M (1 mole/Liter). A saturated solution refers to the solution in which no more solute can be dissolved in it at a given temperature and pressure.To summarize, the given statement means that if you dissolve nickel(II) chloride in water, you will obtain a saturated solution of concentration 1 M (1 mole/Liter).

The principal organic product formed in the reaction of ethylene oxide with sodium cyanide (NaCN) in aqueous ethanol is ethylene cyanohydrin ([tex]C_{2}H_{5}CN[/tex]). The reaction follows this general reaction scheme:

Ethylene oxide + NaCN     →   Ethylene cyanohydrin + NaOH

The principal organic product formed in the reaction of ethylene oxide with sodium cyanide (NaCN) in aqueous ethanol is ethyl nitrile ([tex]C_{2}H_{5}CN[/tex]).

What is Ethyl nitrile?

Ethyl nitrile is an organic compound with the chemical formula [tex]C_{2}H_{5}CN[/tex]. This colorless liquid is a component of some commonly used solvents and in the manufacture of pharmaceuticals, textiles, and insecticides. It is used to generate pesticides, pharmaceuticals, and synthetic rubber during synthesis. The principal organic product formed in the reaction of ethylene oxide with sodium cyanide (NaCN) in aqueous ethanol is ethyl nitrile ([tex]C_{2}H_{5}CN[/tex]).

Mechanism of Reaction: The reaction between ethylene oxide and sodium cyanide in aqueous ethanol is carried out by the Saponification of Cyanide. Saponification refers to the reaction of a base with a fatty acid to create a soap.

The ethylene oxide undergoes nucleophilic attack by the hydroxide ion to produce a salt. The sodium ethylene oxide salt reacts with NaCN to form an intermediate. This intermediate reacts with [tex]H_{2} O[/tex]to form Ethyl nitrile. Ethylene oxide is a toxic, flammable, and colorless gas. It is used as a sterilant for medical equipment and as a fumigant for spices and foods. It has a sweet odor and can cause eye and respiratory irritation, as well as skin burns. The reaction of ethylene oxide with NaCN in aqueous ethanol generates Ethyl nitrile, which is used in a variety of industries.

For more questions related to ethylene cyanohydrin.

https://brainly.com/question/14919939

#SPJ11

Answer:

alpha particles have the least penetration power while beta particles have a moderate penetration power and gamma particles have the highest penetration power.

676.1 kg of cryolite will be produced in this reaction.

In order for 14.8 kg of Al2O3(s), 56.4 kg of NaOH(l), and 56.4 kg of HF(g) to completely react, 8.8 kg of cryolite will be produced. This can be determined by performing a simple mole-to-mole conversion.

The moles of each reactant. Al2O3(s) has an atomic mass of 101.96, NaOH(l) has an atomic mass of 39.997, and HF(g) has an atomic mass of 20.01.

Therefore, the moles of Al2O3(s) are 14.8/101.96 = 0.145 moles, the moles of NaOH(l) are 56.4/39.997 = 1.41 moles, and the moles of HF(g) are 56.4/20.01 = 2.81 moles.

Convert the moles of each reactant to moles of cryolite. The chemical equation for the reaction is:

Al2O3(s) + 2NaOH(l) + 3HF(g) = 2Na3AlF6(s) + 3H2O(l)

This means that the ratio of Al2O3(s) to Na3AlF6(s) is 1:2, the ratio of NaOH(l) to Na3AlF6(s) is 2:2, and the ratio of HF(g) to Na3AlF6(s) is 3:2.

Using this ratio, the moles of Na3AlF6(s) (cryolite) produced can be calculated.

The moles of Na3AlF6(s) produced are 0.145/1 x 2 = 0.290 moles, 1.41/2 x 2 = 1.41 moles, and 2.81/3 x 2 = 1.87 moles. This gives a total of 0.290 + 1.41 + 1.87 = 3.6 moles of Na3AlF6(s).

Convert the moles of Na3AlF6(s) to kilograms. Na3AlF6(s) has an atomic mass of 187.3.

Therefore, the kilograms of Na3AlF6(s) produced are 3.6 x 187.3 = 676.1 kg. Since 1 kg of Na3AlF6(s) is equal to 1 kg of cryolite, 676.1 kg of cryolite will be produced in this reaction.

to know more about cryolite refer here:

https://brainly.com/question/14516036#

#SPJ11



The correct answer is D. Reactants are substances that are combined to form products in a chemical reaction. Products are the result of substances being combined in a chemical reaction.

Yes, you have enough sulfur for three trials. This is because 1.9 g of sulfur is equal to 0.09 mol, which is enough to do three trials of 0.030 mol each. Use the molar mass of sulfur, which is 32 g/mol.

Convert the mass of sulfur given to moles.

1.9 g / 32 g/mol = 0.09 mol

The moles by the number of trials you need to do:

0.09 mol x 3 trials = 0.27 mol

The moles back to grams to make sure you have enough sulfur:

0.27 mol x 32 g/mol = 8.64 g

Since the amount of sulfur given is more than the amount you need for the three trials (1.9 g > 8.64 g), you have enough sulfur.

to know more about sulfur refer here:

https://brainly.com/question/1478186#

#SPJ11

1. The acid that will cause the greatest decrease in pH will be H₂Se

2. The acid with the smallest pKa is Acid (b): H₃P.

The H+ ion concentration's negative constant is known as pH. As a result, the meaning of pH is validated as the strength of hydrogen.

1. The acid that will cause the greatest decrease in pH will be the one with the smallest pKa. This is because the smaller the pKa, the stronger the acid. A stronger acid will release more H⁺ ions when dissolved in water and thus cause a greater decrease in pH. So, the correct option is b. H₂Se will have greatest decrease in pH.

2. The acid with the smallest pKa will be the one with the strongest bond to H. This is because the stronger the bond to H, the weaker the acid. A weaker acid will not release as many H⁺ ions when dissolved in water and thus have a smaller effect on pH. Therefore, the acid with the smallest pKa is Acid (b): H₃P.

Learn more about pH on:

https://brainly.com/question/172153

#SPJ11

When aqueous solution of fecl3 and (nh4)2s are mixed a solid precipitate forms. The correct formula for the precipitate when aqueous solution of FeCl3 and (NH4)2S are mixed is FeS.

The reaction between aqueous solution of FeCl3 and (NH4)2S is a double displacement reaction. When the two aqueous solutions are mixed, Fe2+ ions and S2- ions combine to form a solid precipitate of FeS. The other product is NH4Cl which remains in the solution. Double displacement reaction is a type of chemical reaction in which two ionic compounds react to form two new ionic compounds with the exchange of ions.

In this case, Fe2+ ions from FeCl3 and S2- ions from (NH4)2S combine to form FeS precipitate and NH4Cl remains in the solution. The balanced chemical equation for the reaction is:FeCl3(aq) + (NH4)2S(aq) → FeS(s) + 2NH4Cl(aq).

Learn more about precipitate at:

https://brainly.com/question/28330380

#SPJ11

"The melting of a substance at its melting point is an isothermal process" is true.

An isothermal process is a thermodynamic method in which the temperature of a substance remains constant as heat is added or removed.

A reversible expansion or contraction of a gas is the most straightforward example of an isothermal process.

When a gas expands, it does work on the surroundings, and the energy from the gas is transferred to the surroundings. An isothermal process occurs when the gas expands slowly enough that the temperature remains constant.

Here are some additional points to remember: If the pressure on a gas increases, the gas compresses and loses energy in the form of heat. An isothermal process is one in which the temperature of the gas remains constant. So, when a gas is compressed in an isothermal process, the energy lost as heat is transferred back to the gas as work.

The opposite happens during a process in which the gas expands. The energy expended in work is absorbed by the gas, and the heat lost is restored to the gas. The temperature of the gas remains constant during the process.

To know more about  Isothermal process refer here:

https://brainly.com/question/12023162#

#SPJ11

Boric acid has a hydrogen-bonded layer structure in the solid state is incorrect.

Boric acid, also known as orthoboric acid or H3BO3, has a three-dimensional (3D) structure in the solid state, which is also known as a "network structure".

The main component of the structure is a covalent bond between the boron and oxygen atoms, known as a 2c-2e bond.

This network structure is formed when hydrogen bonds join the oxygen atoms to each other, thus forming a 3D framework.

Borazine (B3N3H6) consists of planar molecules, with three-membered rings of alternating nitrogen and boron atoms that are connected by single bonds.

Borazine has no hydrogen bonds, and all the boron-nitrogen bonds are 2c-2e bonds. Therefore, the statement Boric acid has a hydrogen-bonded layer structure in the solid state is incorrect.

to know more about boric acid refer here:

https://brainly.com/question/14879930#

#SPJ11

The volume of 0.415 M silver nitrate needed to precipitate all the bromide in 35.0 mL of 0.128 M calcium bromide is 5.41 mL.

There are different ways to approach stoichiometry problems, but one common method is to use the balanced chemical equation, the molar ratios, and the concentration-volume relationships.

The balanced chemical equation for the precipitation reaction between silver nitrate and calcium bromide:AgNO3(aq) + CaBr2(aq) → AgBr(s) + Ca(NO3)2(aq)

Determine the limiting reactant and the theoretical yield of silver bromide.

Use the molar mass of AgBr to convert its moles to grams or volume of the precipitate.

The moles of calcium bromide:moles of CaBr2 = concentration × volume (in liters)moles of CaBr2 = 0.128 mol/L × 0.035 Lmoles of CaBr2 = 0.00448 mol

Use the molar ratio between CaBr2 and AgNO3 to find the moles of AgNO3 needed to react with all the bromide ions.

moles of AgNO3 = moles of CaBr2 × (1 mol AgNO3/1 mol CaBr2)moles of AgNO3 = 0.00448 mol × (1 mol AgNO3/2 mol Br-)moles of AgNO3 = 0.00224 mol

Since the stoichiometry of the reaction is 1:1 for AgBr and AgNO3, the theoretical yield of AgBr is also 0.00224 mol.

The volume of 0.415 M AgNO3 needed to provide the theoretical yield of AgBr.

Use the concentration-volume relationship to find the volume of AgNO3 that contains the same amount of moles as the theoretical yield of AgBr.

Moles of AgNO3 = 0.00224 molvolume of AgNO3 = moles of AgNO3/concentration of AgNO3volume of AgNO3 = 0.00224 mol/0.415 mol/Lvolume of AgNO3 = 0.00541 L or 5.41 mL

Therefore, the volume of 0.415 M silver nitrate needed to precipitate all the bromide in 35.0 mL of 0.128 M calcium bromide is 5.41 mL.

to know more about silver nitrate refer here:

https://brainly.com/question/29627918#

#SPJ11

The theoretical yield in grams for the dehydration reaction of 4.00 ml of 2-methylcyclohexanol is 3.17E-5 g.

The theoretical yield in grams for the dehydration of 4.00 mL of 2-methylcyclohexanol can be calculated using the following steps:

1. 2-methylcyclohexanol has a molecular formula of C7H14O, so its molecular weight is 106 g/mol.

2. Since the question specifies 4.00 mL, we can convert that to 0.004 L. We can use the equation mass = volume x density to calculate the mass of 2-methylcyclohexanol used.

The density of 2-methylcyclohexanol is 0.841 g/mL, so the mass of 2-methylcyclohexanol used is 0.841 g/mL x 0.004 L, or 0.00336 g.

3. Since the molecular weight of 2-methylcyclohexanol is 106 g/mol, and the mass of 2-methylcyclohexanol used is 0.00336 g,  the equation yield = mass/molecular weight to calculate the theoretical yield.

The theoretical yield of the dehydration reaction is 0.00336 g/106 g/mol, or 3.17E-5 g.

In conclusion, the theoretical yield in grams for the dehydration reaction of 4.00 ml of 2-methylcyclohexanol is 3.17E-5 g.

to know more about 2-methylcyclohexanol refer here:

https://brainly.com/question/13915064#

#SPJ11

If the value of ΔG° is equal to 0, then the value of K or Kp is equal to 1 and the system is said to be in equilibrium.

A change in temperature occurs when heat flow increases or decreases the temperature. This changes the chemical equilibrium towards the products or the reactants. This can be identified by examining the reaction and determining whether it is an endothermic reaction or an exothermic reaction.

If the temperature is raised, the equilibrium constant decreases. If the forward reaction has an endothermic nature, the equilibrium constant increases. The equilibrium position also changes when the temperature is changed.

To learn more about equilibrium, refer to the link:

https://brainly.com/question/30807709

#SPJ12

The final equilibrium temperature of the mixture will be 40.5°C. Option A is correct.

To calculate the final equilibrium temperature of the mixture, we need to use the principle of conservation of energy, which states that the total energy of a closed system remains constant. In this case, the initial energy of the metal at 98.0°C is transferred to the water and calorimeter, raising their temperature until they reach a final equilibrium temperature.

We can use the following equation to calculate the final equilibrium temperature ([tex]T_{f}[/tex]) of the mixture:

m₁c₁(T₁ - [tex]T_{f}[/tex]) = m₂c₂([tex]T_{f}[/tex] - T₂)

where m₁ and c₁ are the mass and specific heat of the metal, T₁ is the initial temperature of the metal, m₂ and c₂ are the mass and specific heat of the water, and T₂ is the initial temperature of the water.

Substituting the given values, we get:

(20.0 g)(0.900 J/g°C)(98.0°C - [tex]T_{f}[/tex]) = (50.0 g)(4.18 J/g°C)([tex]T_{f}[/tex] - 20.0°C)

Simplifying and solving for [tex]T_{f}[/tex], we get:

1764 - 18[tex]T_{f}[/tex] = 2090[tex]T_{f}[/tex] - 83600

2108[tex]T_{f}[/tex] = 85364

[tex]T_{f}[/tex] = 40.5°C

Hence, A. 40.5°C is the correct option.

To know more about equilibrium temperature here

https://brainly.com/question/15627979

#SPJ4

--The given question is incomplete, the complete question is

"A 20.0 g piece of a metal with specific heat of 0.900 j/g.0c at 98.0 0c dropped into 50.0 g water in a calorimeter at 20.0 0c. the specific heat of water is 4.18 j/g.0c calculate the final equilibrium temperature of the mixture group of answer choices: A) 40.5°C. B) 48.9°C. C) 36.7°C. D) 45.5°C."--

The reactivity (base strength) of a base has a direct correlation with its selectivity (regioselectivity). Generally speaking, stronger bases will be more selective and react faster than weaker bases.

This is due to the fact that stronger bases have greater electron-donating power which allows them to selectively bond to certain parts of the molecule more effectively. In the case of regioselectivity, stronger bases will generally form stronger bonds with certain parts of the molecule, such as electrophilic or acidic sites, than with others.

The correlation between reactivity (base strength) and selectivity (specifically regioselectivity) can be described as follows: When a base reacts with a proton, the bond between the base and the proton is broken, leaving a negative charge on the base. The base's reactivity (its tendency to accept a proton) is linked to its base strength. The greater the strength of a base, the more reactive it is.

Read more about the reactivity :

https://brainly.com/question/17746822

#SPJ11

The volume of the sodium carbonate needed to precipitate is 31.248 ml. This is calculated using the dilution formula.

The molarity of the solution and the volume of the first solution can be correlated with the molarity and the volume of diluted solution. It is called as dilution formula.

Molar concentration is the another term for molarity. Molarity is a measure of the concentration of a chemical species in particular of a solute in a solution in terms of amount of substance per unit volume of solution.

The expression for molarity of the solution is,

M1 V1 = M2 V2

here we have 0.125 m sodium carbonate solution would be needed to precipitate the calcium ion from 37.2 ml of 0.105 m cacl2 solution.  

putting all the values we get,

0.105 * 37.2 = 0.125 * V2

V2 = 31.248

To learn more about Dilution formula

https://brainly.com/question/7208939

#SPJ4

The physical method that can separate a mixture of steel ball bearings and marbles is sorting.

The process of separating the components of a mixture is referred to as separation. A mixture of steel ball bearings and marbles can be separated using the sorting method. .Sorting is a process of separating components of a mixture by hand.

Steel ball bearings and marbles can be sorted based on their appearance, size, and weight. The process of sorting is the simplest method of separation that does not require any special tools or equipment. Hence, the physical method that can separate a mixture of steel ball bearings and marbles is sorting.

Know more about   Separation  here:

https://brainly.com/question/29947198

#SPJ11

Answer:

It’s D sorting

Explanation:

I got it correct duh

To determine the percent yield, we need to first calculate the theoretical yield of the reaction using stoichiometry, and then divide the actual yield by the theoretical yield and multiply by 100%. The percent yield of the reaction is approximately 84.9%.

Percent yield is a measure of the efficiency of a chemical reaction, calculated by dividing the actual yield of a reaction by the theoretical yield and multiplying by 100%. It represents the percentage of the theoretical amount of product that was actually obtained in a reaction.

The balanced chemical equation is:

2Al + Cr₂O₃ → Al₂O₃ + 2Cr

The molar mass of Cr₂O₃ is 152 g/mol, the molar mass of Al is 27 g/mol, and the molar mass of Cr is 52 g/mol.

We need to determine which reactant is limiting, so we can calculate the theoretical yield based on the amount of limiting reactant. We can do this by calculating the number of moles of each reactant using their molar masses and dividing by their stoichiometric coefficients in the balanced equation:

moles of Cr₂O₃= 44.1 g / 152 g/mol = 0.29 mol

moles of Al = 35.0 g / 27 g/mol = 1.30 mol

From the balanced equation, we see that 1 mole of Cr2O3 reacts with 2 moles of Cr. Therefore, the theoretical yield of Cr is:

moles of Cr produced = 0.29 mol Cr₂O₃x (2 mol Cr / 1 mol Cr₂O₃) = 0.58 mol Cr

mass of Cr produced = 0.58 mol Cr x 52 g/mol = 30.16 g Cr

The percent yield is:

% yield = (actual yield / theoretical yield) x 100%

% yield = (25.6 g Cr / 30.16 g Cr) x 100% = 84.9%

Therefore, the percent yield of the reaction is approximately 84.9%.

To find out more about percent yield, visit:

https://brainly.com/question/17042787

#SPJ1

To create 303 grams of hydrogen phosphoric acid, we need 246 grams of water. Phosphoric acid is a type of acid that is commonly used in the production of fertilizers, detergents, and other chemicals.

Phosphoric acid is also used in the food industry as a food additive. The molecular formula for phosphoric acid is H3PO4. It is a triprotic acid, meaning it can donate up to three hydrogen ions in solution. The balanced chemical equation for the reaction of water with phosphoric acid is as follows:H3PO4 + H2O → H3O+ + H2PO4-If we examine this equation, we can see that one mole of phosphoric acid reacts with one mole of water. The molar mass of phosphoric acid is 98 g/mol. Therefore, to create 98 grams of phosphoric acid, we would need 18 grams of water (which is one mole of water).

We are given that we need to create 303 grams of phosphoric acid. Therefore, we can use the following proportion to determine how much water we need: 98 g of phosphoric acid is to 18 g of water as 303 g of phosphoric acid is to x g of water Solving for x, we get: x = (18 g of water/98 g of phosphoric acid) * 303 g of phosphoric acid x = 55.173 grams of water

For more such questions on phosphoric acid, click on:

https://brainly.com/question/29947796

#SPJ11

If two surface water types with the same density but different salinities and temperatures mix, the resulting water will be denser than both the surface water types.

Areas under warm and high salinity surface water with an appreciable depth, the temperature and salinity decreases with depth and internal vertical mixing processes occur despite stability of the water column. Eventually, this phenomenon is caused by the ability of the sea water to lose or gain heat by conduction and loss or gain of salt takes place by diffusion. This causes the density of the moving water to change directions.

Salt water mixes over limited depths and forms homogenous layers.

To know more about surface water here

https://brainly.com/question/25147725

#SPJ4