the speed of sound in air is 345 m/s. a tuning fork vibrates above the open end of a sound resonance tube. if sound waves have wavelengths 71-cm in the tube, what is the frequency (in hertz) of the tuning fork? never include units with a numerical answer.

To determine how many joules of energy a 100-watt light bulb uses per hour, you can follow these steps:

Step 1: Identify the power of the light bulb, which is given as 100 watts.

Step 2: Convert the power to joules per second, since 1 watt is equal to 1 joule per second. Therefore, the light bulb has a power of 100 joules per second.

Step 3: Calculate the energy used per hour. There are 3,600 seconds in an hour, so multiply the power (in joules per second) by the number of seconds in an hour:

Energy = Power x Time
Energy = 100 joules/second x 3,600 seconds
Energy = 360,000 joules

So, a 100-watt light bulb uses 360,000 joules of energy per hour.

To know more about Energy :

https://brainly.com/question/31312255

#SPJ11

The work done in pushing the crate up the inclined plane is 1428.7 joules.

To calculate the work done in pushing the crate up the inclined plane, we need to use the formula:

Work = force x distance x cos(theta)

Where:

force = the weight of the crate = 842 N
distance = the length of the inclined plane = 10 m
theta = the angle between the inclined plane and the horizontal = 9 degrees

First, we need to find the component of the weight that acts parallel to the inclined plane. This is given by:

force_parallel = force x sin(theta) = 842 N x sin(9 degrees) = 146.9 N

Next, we can find the force required to push the crate up the inclined plane. This is equal to the force parallel to the plane, since we are assuming no friction:

force_push = force_parallel = 146.9 N

Finally, we can calculate the work done by multiplying the force by the distance and the cosine of the angle:

Work = force_push x distance x cos(theta) = 146.9 N x 10 m x cos(9 degrees) = 1428.7 J

Therefore, the work done in pushing the crate up the inclined plane is approximately 1428.7 joules.

More on work: https://brainly.com/question/15119186

#SPJ11

The intensity level of the resulting sound is approximately 73 dB, the correct option is (e)

To calculate the intensity level of the resulting sound, we use the formula:

L = 10 log(I ÷ I0)

where L is the intensity level in decibels, I is the intensity of the sound wave in watts per square meter, and I0 is the reference intensity, which is equal to 1 x 10⁻¹² watts per square meter.

Since the motorcycles emit identical sound waves, the intensity of each wave is the same. We can calculate the intensity of a single motorcycle's sound wave using the formula:

I = [tex](10^{L/10} )[/tex] x I0

where L is the intensity level of the sound wave in decibels. Substituting L = 70 dB and I0 = 1 x 10⁻¹² watts per square meter, we get:

I = (10⁷) x 1 x 10⁻¹²

= 1 x 10⁻⁵ watts per square meter

To calculate the intensity level of the resulting sound, we use the formula:

L = 10 log(2I ÷ I0)

where 2I is the intensity of the sound waves produced by two identical motorcycles. Substituting I = 1 x 10⁻⁵ watts per square meter and I0 = 1 x 10⁻¹² watts per square meter, we get:

2I = 2 x 1 x 10⁻⁵

= 2 x 10⁻⁵ watts per square meter

L = 10 log(2 x 10⁻⁵ ÷ 1 x 10⁻¹²)

= 10 log(2 x 10⁷)

= 10 (7.301)

= 73.01 dB

Therefore, the correct option is (e)

To learn more about intensity follow the link:

https://brainly.com/question/17583145

#SPJ4

The complete question is:

A motorcycle passing by your apartment emits a sound with an intensity level of 70 dB. If two identical motorcycles passed by together, what would be the intensity level of the resulting sound?

a. 80 dB

b. 140 dB

c. 103 dB

d. 70 dB

e. 73 dB

The depth of the wave base would be 10 feet below the surface (option C), which is one-half of the wavelength of 20 feet.

The depth of the wave base, which is the depth at which wave movement ceases to have an influence on sediment transport and erosion, is determined by the wavelength of the waves. In general, the depth of the wave base is equal to half the wavelength of the waves.

Therefore, if the wavelength of a set of waves is 20 feet long, the depth of the wave base would be 10 feet below the surface (option C). This means that any sediment or features below this depth would be relatively undisturbed by the action of the waves.

Learn more about wavelength

https://brainly.com/question/31143857

#SPJ4

The other longitudinal wave moving through belmontium should also have a speed of 380 m/s.

In a longitudinal wave, particles of the medium oscillate parallel to the direction of the wave's propagation. When two longitudinal waves meet, they undergo a process called interference, which can be constructive or destructive depending on their phase relationship.

Belmontium, the newly discovered element, is the medium through which the first longitudinal wave is passing at a speed of 380 m/s. When this wave encounters another longitudinal wave coming from the opposite direction, they interact with each other.

In this scenario, the speed of the second longitudinal wave can be determined by the principle of superposition. According to this principle, the displacement of particles in the medium at any point in time is the algebraic sum of the displacements due to individual waves.

Since the medium is the same for both waves (belmontium), their speeds should also be the same. This is because the speed of a wave in a given medium is determined by the properties of that medium, such as its density and elasticity. In the case of longitudinal waves, the speed depends on the medium's bulk modulus and its mass density.

Therefore, the other longitudinal wave moving through belmontium should also have a speed of 380 m/s. The speed is expressed using the appropriate MKS (meter-kilogram-second) units as 380 meters per second (m/s).

For more such questions on Longitudinal wave.

https://brainly.com/question/15385740#

#SPJ11

Roughly half of a person's body is submerged when they are floating gently in fresh water.

When an object is floating in water, it displaces an amount of water equal to its weight. If the weight of the displaced water is greater than the weight of the object, the object will float, and if it is less, the object will sink.

The fraction of a person that is submerged while floating in fresh water depends on the ratio of their weight to the weight of the water displaced by their body.

Assuming that the volume of a person is constant, we can calculate the weight of a person as:

Weight = density x volume x gravity

where:

density = 983 [tex]kg/m^3[/tex] (average density of human body)

volume = the volume of a person (assumed to be constant)

gravity = 9.81 [tex]m/s^2[/tex] (acceleration due to gravity)

Let's assume the weight of a person is 70 kg, then their volume would be:

Volume = Weight / (density x gravity)

Volume = 70 / (983 x 9.81)

Volume = 0.00716 [tex]m^3[/tex]

Now, let's consider the weight of the water displaced by the person's body. The weight of the water displaced is equal to the weight of the person, which is 70 kg.

Therefore, the fraction of the person's body that is submerged in water is:

Fraction submerged = Weight of water displaced / Total weight

Fraction submerged = 70 / (70 + weight of water in the submerged part of the body)

Since the person is floating gently in water, we can assume that only a small part of their body is submerged, and we can neglect the weight of water in the submerged part of the body.

Thus, we can approximate the fraction submerged as:

Fraction submerged ≈ Weight of water displaced / Total weight

Fraction submerged ≈ 70 / (70 + 70)

Fraction submerged ≈ 0.5 or 50%

Therefore, roughly half of a person's body is submerged when they are floating gently in fresh water.

Learn more about submerged

https://brainly.com/question/30690757

#SPJ4

The fundamental resonant wavelength of a 1-meter long pipe open at both ends is 2 meters.

To find the fundamental resonant wavelength of a pipe open at both ends, we can use the formula:

Wavelength = 2 * Length of the pipe / Harmonic number

Since you're looking for the fundamental resonant wavelength, the harmonic number (n) is 1.

Given that the length of the pipe (L) is 1 meter:

Wavelength = 2 * 1 / 1

Wavelength = 2 meters

So, the fundamental resonant wavelength of a 1-meter long pipe open at both ends is 2 meters. The diameter of the pipe (0.1 meters) doesn't affect the wavelength in this case.

More on wavelength: https://brainly.com/question/31174532

#SPJ11

The focal length of the secondary mirror should be 0.187 m.

In a Cassegrain telescope, the final image is formed at the point where the parallel rays of light converge after reflecting off the secondary mirror and the primary mirror. Using the mirror equation 1/f = 1/p + 1/q, where f is the focal length, p is the distance of the object from the mirror, and q is the distance of the image from the mirror, we can calculate the distance of the image from the primary mirror.

Given: f_primary = 1.0 m, p = 1.85 m (0.85 m distance from primary to secondary + 1.0 m focal length of primary), and q = 0.12 m (distance of final image from the front surface of the primary mirror).

Solving for f_secondary: 1/1.0 = 1/1.85 + 1/f_secondary + 1/0.12

f_secondary = 0.187 m.

To learn more about focal length of telescope, here

https://brainly.com/question/12994582

#SPJ4

The magnetic field on the axis of the solenoid is 5.03 × 10⁻⁴ T.

The magnetic field on the axis of a solenoid can be calculated using the formula:

B = μ₀ * n * I

Where B denotes the intensity of the magnetic field, 0 denotes the permeability of empty space, n denotes the number of turns per unit length, and I is the current flowing through the solenoid.

In this case, the solenoid is 1 meter long and has 200 turns, so n = 200 turns / 1 meter = 200 turns/meter. The solenoid is delivering 2A of current.

The value of μ₀ is a constant, equal to 4π × 10⁻⁷ T·m/A

When we enter these values into the formula, we get:

B = μ₀ * n * I

= 4π × 10⁻⁷ T·m/A * 200 turns/m * 2A

= 5.03 × 10⁻⁴ T

Therefore, the magnetic field on the axis of the solenoid is 5.03 × 10⁻⁴ T.

Learn more about  magnetic field

https://brainly.com/question/14848188

#SPJ4

magnetic field on the axis of the solenoid is approximately 0.005 T

Solution -  Hi! To calculate the magnetic field on the axis of a solenoid, you can use the formula:

Magnetic field (B) = μ₀ * n * I . (applicable for ideal long solenoid)

where μ₀ is the permeability of free space (approximately 4π x 10^-7 Tm/A), n is the number of turns per unit length, and I is the current.

In your case, the solenoid is 1 meter long with 200 turns and carries a 2 A current. To find n, divide the number of turns by the length:

n = 200 turns / 1 m = 200 turns/m

Now, plug the values into the formula:

B = (4π x 10^-7 Tm/A) * (200 turns/m) * (2 A)

B ≈ 0.005 T

The magnetic field on the axis of the solenoid is approximately 0.005 T (Tesla).

To learn more about solenoid, click on this

brainly.com/question/22043434

#SPJ11

Balancing chemical equations ensures that the law of conservation of mass is upheld, as atoms cannot be created or destroyed in a reaction, and the same number of atoms of each element must be present on both sides of the equation.

In chemical reactions, it is important to ensure that the same number of atoms of each element are present on both the reactant and product sides of the equation. This principle is known as the law of conservation of mass, which states that the total mass of the reactants must equal the total mass of the products in a chemical reaction.

The balancing of chemical equations is essential for understanding the stoichiometry of a reaction, which refers to the study of the quantitative relationships between reactants and products in a chemical reaction. Balancing the equation involves adjusting the coefficients of the reactants and products so that the same number of atoms of each element is present on both sides of the equation.

The law of conservation of mass occurs because atoms cannot be created or destroyed in a chemical reaction. The atoms in the reactants must be present in the products, albeit in a different arrangement, which is why balancing is essential. Therefore, balancing the equation ensures that the mass of the reactants equals the mass of the products, and the law of conservation of mass is upheld.

To learn more about the conservation of mass

https://brainly.com/question/13383562

#SPJ4

The correct response would be: "She should place a positively charged rod near the left sphere."

What is Charges?

In physics, charges refer to the fundamental property of matter that gives rise to electric interactions. Charges can be positive or negative, and they are responsible for the phenomenon of electric force, which is the force that acts between charged objects.

By bringing a positively charged rod near the left sphere, it will induce a redistribution of charges in the conductive sphere. The positive charges in the left sphere will repel the positive charges in the rod, causing the electrons in the left sphere to move away from the rod and distribute themselves more evenly across the surface of the sphere, leaving the side facing the rod with a net positive charge.

Learn more about Charges from the given link

https://brainly.com/question/18102056

#SPJ1

Therefore, Jerry's mass is approximately 118.4 kg.

It is the most fundamental characteristic of matter and one of the fundamental quantities in physics. Mass is a term used to describe how much matter is there in a body. (kg). The mass of a body is constant over time.

The following is the equation for momentum conservation:

m1v1 + m2v2 = m1v1' + m2v2'

We are aware of Ben's 150 kg mass and 11 m/s post-push velocity. Additionally, we are aware of Jerry's post-push velocity, which is 15 m/s. To find Jerry's mass, we can rewrite the equation as follows:

m2 = (m1v1 + m1v1' - m2v2') / v2

Substituting in the known values:

m2 = (150 kg * 0 m/s + 150 kg * 11 m/s - m2 * 15 m/s) / 15 m/s

Simplifying and solving for m2:

m2 = (150 kg * 11 m/s) / (15 m/s + 1) ≈ 118.4 kg

To know more about mass visit:-

https://brainly.com/question/30337818

#SPJ1

Answer: B Venus

Explanation:

Clockwise angular velocity was  non-zero and had a positive sign. So, the correct answer is D.

The right-hand rule for angular velocity asserts that if the right hand's thumb is pointing in the direction of the axis of rotation, then the direction of the angular velocity vector is given by the direction in which the right hand's fingers curl.

This makes sense in this situation. As a result, the angular velocity vector will point in the same direction as the rotation's axis, and it will be positive when the angular velocity is positive.

In physics, engineering, and other sciences, the right-hand rule for angular velocity is a helpful tool for visualising the direction of the angular velocity vector.

This rule allows us to quickly ascertain the direction and sign of the angular velocity in any given situation.

Complete Question:

Which angular velocity was non-zero and what was the sign? Explain how this makes sense given the right-hand rule for the angular velocity.

A.  Counterclockwise, Positive

B.  Clockwise, Negative

C. Counterclockwise, Negative

D. Clockwise, Positive

To learn more about velocity visit:

https://brainly.com/question/80295

#SPJ4

The total work done by the workman was 432 joules

The workman lifted the lumber a vertical distance of 9.6 m, which means he did work against gravity. The amount of work done is equal to the force (weight of the lumber) multiplied by the distance it was lifted:

Work = force x distance

Work = 45 N x 9.6 m

Work = 432 joules

In addition to lifting the lumber, the workman also moved it horizontally a distance of 22 m. However, since the lumber was not lifted or lowered during this movement, no work was done against gravity.

Therefore, this distance does not affect the amount of work done by the workman.

To learn more about : work

https://brainly.com/question/30121704

#SPJ11

The correct answer is C.

In this case, Total Fixed Costs (TFC) remain positive as they are the expenses that do not change with the level of output, such as rent, salaries, and depreciation. Total Variable Costs (TVC) are zero since there is no production, and variable costs depend on the level of output. Total Costs (TC) remain positive as they are the sum of TFC and TVC, and since TFC is positive, TC will also be positive.

To learn more about Total fixed Cost, click on this -

brainly.com/question/26358854

#SPJ11

The number of atoms in 147.82 g of sulphur is 2.772 x 10²⁴. In 1.953 x 10⁸ g of helium, there are 4.883 × 10⁷ moles of helium. 15.50 moles of oxygen weigh 248 g. Calcium phosphate's formula mass would be 310.18 g/mol.

The quantity of atoms or molecules per gramme of atomic weight is known as Avogadro's number, which is 6.022 × 10²³/mole. One mole of hydrogen comprises 6.022 × 10²³ hydrogen atoms for one gramme of hydrogen with an atomic weight of one gramme.

The Avogadro's number states that 1 mole of any substance contains 6.022 x 10²³ particles. Therefore, 8.500 moles of chlorine atoms would contain:

8.500 moles * 6.022 x 10²³ atoms/mole = 5.1167 x 10²⁴ atoms of chlorine.

The molar mass of oxygen is 16.00 g/mol. Therefore, 15.50 moles of oxygen would have a mass of:

15.50 moles * 16.00 g/mol = 248 g

So the mass of 15.50 mole of oxygen is 248 g.

The molar mass of helium is 4.00 g/mol. Therefore, 1.953 x 10⁸ g of helium would contain:

1.953 x 10⁸ g / 4.00 g/mol = 4.883 x 10⁷ moles of helium.

The molar mass of sulfur is 32.06 g/mol. Therefore, 147.82 g of sulfur would contain:

147.82 g / 32.06 g/mol = 4.6055 moles of sulfur. Therefore, the formula mass of Calcium phosphate would be:

(340.08 g/mol) + (230.97 g/mol) + (8*16.00 g/mol) = 310.18 g/mol.

To know more about formula visit:-

https://brainly.com/question/29792091

#SPJ1

The Resistance r is 56.97 ohms

To solve this problem, we can use Ohm's Law and the equation for the voltage across an inductor in an AC circuit.

First, let's find the current in the circuit. We know that the voltage across the series combination of the resistor and inductor is the sum of the voltage across the resistor (29 V) and the voltage across the inductor (33 V):

V_total = V_R + V_L
V_total = IR + IXL
where I is the current in the circuit, X_L is the inductive reactance (which depends on the frequency and inductance of the inductor), and R is the resistance.

Since the circuit is operating at a frequency of 60 Hz and the inductance is 3.2 H, we can find the inductive reactance using the formula:

X_L = 2πfL
X_L = 2π(60)(3.2)
X_L ≈ 120.96 Ω

Now we can solve the current:

V_total = IR + IXL
62 = I(R + 120.96)
I ≈ 0.509 A

Next, we can use Ohm's Law to solve for the resistance:

V_R = IR
29 = (0.509)R
R ≈ 56.97 Ω

Therefore, the resistance in the circuit is approximately 56.97 ohms.

Know more about Ohm's Law here:

https://brainly.com/question/14296509

#SPJ11

From these calculations, we can see that weightlifter C does 3 x 10^3 J of work, as their work value is the closest to this value. Therefore, weightlifter C does 3 x 10^3 J of work.

Add gravity (9.81) to the weight, then multiply by the distance:

A) [tex]100 * 9.81 * 2.25 = 2207.25 = 2.2 \times 10^3[/tex]

B) [tex]150 * 9.81 * 1.76 = 2589.84 = 2.6 \times 10^3[/tex]

C) [tex]200 * 9.81 * 1.50 = 2943 = 2.9 \times 10^3[/tex] ( Can round to [tex]3.0 \times 10^3[/tex])

D) [tex]275 * 9.81 * 1.25 = 3372.18 = 3.4 \times 10^3[/tex]

Weightlifters are athletes who take part in the weightlifting sport, which entails performing precise movements with a barbell loaded with weights to ascertain the highest weight that can be lifted. The snatch and the clean are the primary competitions in weightlifting, which has been a part of the Olympic Games since 1896.

Weightlifters require strength, power, and explosive energy to perform the lifts correctly and maximize their potential. They often train with heavy weights to build their muscles and improve their technique. Weightlifting competitions are categorized by weight class, with athletes competing against others in their respective weight divisions. Weightlifting is a difficult and rewarding sport that calls for commitment, self-control, and perseverance to excel.

To learn more about Weightlifters visit here:

brainly.com/question/30853841

#SPJ4

Complete Question:-

Four weightlifters A through D enter a competition. Their mass and distance that each lifts are shown in the table.

Weighlifter Mass(kg) Distance(m)

A 100.0 2.25

B 150.0 1.76

C 200 1.50

D 275 1.25

Which weightlifter does 3 x 10^3 J of work?

Answer: the velocity of the 500 kg car after the collision is 3 m/s to the east.

Explanation:

Initial momentum = (mass of car 1 x velocity of car 1) + (mass of car 2 x velocity of car 2)

Initial momentum = (1000 kg x 4 m/s) + (500 kg x -3 m/s)   (Note that we use a negative velocity for car 2 because it is traveling in the opposite direction)

Initial momentum = 4000 kg m/s - 1500 kg m/s = 2500 kg m/s

After the collision, the total mass and total momentum of the system remain the same.

Final momentum = (mass of car 1 x velocity of car 1) + (mass of car 2 x velocity of car 2)

Final momentum = (1000 kg x 1 m/s) + (500 kg x v)  (where v is the velocity of the 500 kg car after the collision)

Final momentum = 1000 kg m/s + 500v

Since the total momentum is conserved, we can set the initial momentum equal to the final momentum:

Initial momentum = Final momentum

2500 kg m/s = 1000 kg m/s + 500v

Solving for v, we get:

v = (2500 kg m/s - 1000 kg m/s) / 500 kg

v = 3 m/s

??

When a high voltage is applied to a low-pressure gas and it starts to glow, it will emit an emission line spectrum.

This spectrum consists of bright, narrow lines at specific wavelengths, which are characteristic of the element or molecules in the gas. This is due to the electrons in the gas being excited to higher energy levels and then falling back down to lower energy levels, emitting photons of light at specific wavelengths corresponding to the energy differences between the levels. The resulting emission spectrum can be used to identify the elements or molecules present in the gas.

Learn more about spectrum

https://brainly.com/question/6836691

#SPJ4

If my friend's cat was cloned, the resulting cat would be genetically identical to the original cat. However, this does not mean that the cloned cat would be exactly the same as the original cat in terms of its behavior, personality, or even appearance.

Environmental factors and experiences can have a significant impact on an animal's development and behavior, so even genetically identical cats can have differences in their behavior and personality. Additionally, the cloning process itself can introduce some genetic and epigenetic changes that may affect the cloned cat's development and behavior. Therefore, while the cloned cat may look and behave similarly to the original cat, it would not be exactly the same.

Learn more about Environmental factors

https://brainly.com/question/29517743

#SPJ4

Distance the masses on the right of the fulcrum need to be to balance with the two masses on the left is (3.5kgm - x kg * d m) / 1kg

In order for a lever to be balanced, the moments on either side of the fulcrum need to be equal. The moment is calculated by multiplying the distance from the fulcrum by the mass of the object. Therefore, to balance the two masses on the left of the fulcrum with the masses on the right, we need to calculate the moment on each side and make them equal.

Let's assume the masses on the left of the fulcrum are 2kg and 3kg, and the masses on the right are x kg and y kg, respectively. If the distance between the fulcrum and the 2kg mass is 1m, and the distance between the fulcrum and the 3kg mass is 0.5m.

we can calculate the moments on each side as follows:

Moment on the left side = 2kg x 1m + 3kg x 0.5m = 2kg + 1.5kg = 3.5kgm

Moment on the right side = x kg * d m + y kg * e m

where d and e are the distances between the fulcrum and the masses on the right.

To make the moments equal, we can set them equal to each other:

3.5kgm = x kg * d m + y kg * e m

If we know the mass of one of the objects on the right, we can solve for the distance needed for the other mass to balance the lever. For example, if we know the mass of the object closest to the fulcrum is 1kg.

we can rearrange the equation to solve for e:

e = (3.5kgm - x kg * d m) / 1kg

Once we know the distance needed for the other mass, we can set up the lever accordingly and it should be balanced.

The Question was Incomplete, Find the full content below :

A balanced lever has two weights on it, the masses on the left of the fulcrum are 2kg and 3kg, and the masses on the right are x kg and y kg. If the distance between the fulcrum and the 2kg mass is 1m, and the distance between the fulcrum and the 3kg mass is 0.5m.what is the distance the masses on the right of the fulcrum need to be to balance with the two masses on the left?

know more about mass of the object here:

https://brainly.com/question/1882842

#SPJ11

Yes, the momentum is conserved for each object in a collision where total momentum is conserved.

This means that the momentum of each individual object before the collision will equal the momentum of that same object after the collision, but in the opposite direction. This conservation of momentum is a fundamental law of physics, stating that in a closed system, the total momentum remains constant unless acted upon by an external force. Yes, each object in the impact maintains its momentum. This is due to the law of conservation of momentum, which stipulates that the overall momentum of a closed system—in this case, the collision of the two objects—remains constant before and after the collision. Every object must conserve its momentum because it is a component of the closed system and is part of the overall momentum. As a result, in the collision, each object's momentum is preserved.

learn more about collision here:

https://brainly.com/question/30636941

#SPJ11

Yes, the momentum is conserved for each object in a collision where total momentum is conserved.

This means that the momentum of each individual object before the collision will equal the momentum of that same object after the collision, but in the opposite direction. This conservation of momentum is a fundamental law of physics, stating that in a closed system, the total momentum remains constant unless acted upon by an external force. Yes, each object in the impact maintains its momentum

. This is due to the law of conservation of momentum, which stipulates that the overall momentum of a closed system—in this case, the collision of the two objects—remains constant before and after the collision. Every object must conserve its momentum because it is a component of the closed system and is part of the overall momentum. As a result, in the collision, each object's momentum is preserved.

learn more about collision here:

brainly.com/question/30636941

#SPJ4

The temperature of the air in the tire after the long drive is approximately 68 degrees Celsius.

The combined gas law is used to relate pressure, temperature, and volume of a gas. It states that the product of the pressure and volume of a gas is directly proportional to its absolute temperature. Mathematically, it can be expressed as:

(P₁ ÷ T₁) = (P₂ ÷ T₂)

P₂ and T₂ represent the final pressure and temperature, and P₁ and T₁ represent the beginning pressure and temperature. This equation can be rearranged to account for T₂:

T₂ = (P₂ ÷ P₁) x T₁

Plugging in the given values, we get:

T₂ = (225 kPa ÷ 198 kPa) x 300 K

T₂ = 1.136 x 300 K

T₂ = 340.8 K

Converting this to Celsius, we get:

T₂ = 67.8°C ≈ 68°C

To learn more about temperature follow the link:

https://brainly.com/question/11464844

#SPJ4

The test instrument commonly used to measure insulation resistance on equipment rated 600V or lower has an output of 1000 volts and uses lead connections.

The test instrument being described is likely a megohmmeter or insulation resistance tester. These instruments are used to measure the insulation resistance of electrical equipment, which is important for ensuring the safety and proper functioning of the equipment.

The output voltage of 1000 volts is necessary to generate enough current through the insulation to accurately measure its resistance. The lead connections are used to connect the instrument to the equipment being tested, and they typically consist of two probes with insulated handles that are connected to the instrument by wires. The leads are carefully designed to minimize leakage current and ensure accurate measurements. Overall, these instruments play a crucial role in maintaining electrical safety and reliability.

To know more about instrument, here

brainly.com/question/9802242

#SPJ4

Sunlight shining through a thin, cool gas produces an absorption line spectrum.

When white light passes through a thin, cool gas, some of the light is absorbed by the gas atoms, causing dark lines to appear in the spectrum known as an absorption spectrum. These dark lines represent the wavelengths of light that were absorbed by the gas. This type of spectrum is known as an absorption line spectrum. In the case of sunlight passing through Earth's atmosphere, the gases in the atmosphere absorb specific wavelengths of light, creating a series of dark lines in the spectrum. These dark lines are called Fraunhofer lines and are used to identify the chemical composition of the Sun and other stars.

Learn more about absorption line spectrum

brainly.com/question/31040837

#SPJ11

The wavelength of a radio photon from an AM radio station broadcasting at 1270 kilohertz is 236 meters.

To find the wavelength of a radio photon from an AM radio station broadcasting at 1270 kilohertz, we can use the formula:
wavelength (λ) = speed of light (c) / frequency (f)

1. First, we need to convert the frequency from kilohertz to hertz:
1270 kilohertz = 1270 * 10³ hertz = 1,270,000 hertz

2. Next, we will use the speed of light, which is approximately 3.00 * 10⁸ meters per second (m/s).

3. Now, we can plug in the values into the formula:
wavelength (λ) = (3.00 * 10⁸ m/s) / (1,270,000 Hz)

4. Calculate the wavelength:
λ ≈ 236.22 meters

5. Finally, express the answer to three significant figures and include the appropriate units:
λ ≈ 236 meters

Learn more about wavelength:

https://brainly.com/question/10750459

#SPJ11

The change in momentum of the cart is -110 kg m/s. This means that the momentum of the cart decreased by 110 kg m/s as a result of the collision with the concrete wall.

The change in momentum of the cart can be calculated using the formula Δp = mΔv, where Δp is the change in momentum, m is the mass of the cart, and Δv is the change in velocity. In this case, the mass of the cart is 11 kg and the initial velocity is 15 m/s to the right, while the final velocity is 5 m/s in the opposite direction.

So, the change in velocity (Δv) is calculated by subtracting the final velocity from the initial velocity: Δv = 5 m/s - 15 m/s = -10 m/s.

Now, we can calculate the change in momentum (Δp) by multiplying the mass and change in velocity: Δp = 11 kg x (-10 m/s) = -110 kg m/s.

To learn more about : momentum

https://brainly.com/question/1042017

#SPJ11

A geologic feature of divergent plate continental crust is called a zone of rifting.

A zone of rifting is a geologic feature that occurs where tectonic plates are moving away from each other, causing the Earth's crust to stretch and thin. This process can result in the formation of a long, narrow depression called a rift valley.

A geologic feature of divergent plate continental crust is called a zone of rifting. This is a region where tectonic plates are moving away from each other, causing the Earth's crust to stretch and thin. As the crust stretches, faults and fractures can develop, and magma from the Earth's mantle can rise to the surface, creating volcanic activity. Over time, this process can lead to the formation of a new ocean basin if the rifting continues and the plates continue to move apart. Some examples of zones of rifting include the East African Rift Valley and the Mid-Atlantic Ridge.

To know more about zone of rifting:

https://brainly.com/question/987497

#SPJ1