What happens when the two wires going in to an appliance touch?

nothing

resistance

overload

short circuit

Answers

Answer 1

Answer:

You will receive an electrical shock. You will receive a shock if you touch two wires at different voltages at the same time. You will receive a shock if you touch a live wire and are grounded at the same time. When a circuit, electrical component, or equipment is energized, a potential shock hazard is present.

Explanation:

sorry this is like a year later and I hope this will help you if you haven't got it already

Answer 2

Answer:

Explanation:

They will short circuit and shock u did the exam


Related Questions

On a particular day, Denali had a temperature of -23°C at its peak and 13°C at its base. What could be the reason for this temperature difference?
A.
Temperature increases with an increase in altitude.
B.
Temperature decreases with an increase in altitude.
C.
The base is close to the Gulf of Alaska.
D.
The mountain receives lake-effect snow.

Answers

Answer:

B.) Temperature decreases with an increase in altitude.

As you climb a mountain, you can expect the air temperature to decrease by 6.5 degrees C for every 1000 meters you gain. This is called the standard average lapse rate.

(The awnser is b so there u go

What would be different on Earth if the Moon did not exist?

Answers

The moon influences life as we know it on Earth. It influences our oceans, weather, and the hours in our days. Without the moon, tides would fall, nights would be darker, seasons would change, and the length of our days would alter.
1.) There would be an effect on the tides. For example El Niño and La Niña are lunar tidal phenomenon that is partially caused by the moon. Tides would be nearly 2/3 shorter.
2.) The earth would rotate about 3 times faster.
3.) With no moon, the tilt of the Earth’s axis which would cause a large shift in seasons and weather.
4.) There would be no lunar eclipses.
5.) The moon provides a lot of light at night, so if there was no moon, the nights would be extremely dark.
6.) Days would also be much shorter.

I got some of this info from Inside Science in case you need to provide a source.

Thoughts about Genetically Modified Crops

Answers

I think that GMOs, also known as genetically modified crops or organisms, can be used in good and bad ways. They can provide crops to survive longer, and produce a bigger portion. However, on the other side of that, it is claimed that it creates a large amount of greenhouse gas emissions, which can turn into climate change.
there r many pros and cons, also using a special type of bacteria is really helpful in genetic modification

Hi! I really need help on these questions, it would be great if you can answer them!

Answers

1: Equilibrium

[] When two forces are equal in opposite directions, they are in a state of equilibrium

2: Friction

[] It can be hard to sometimes slide a paper across a table, roll a car across the ground, etc etc. This is because of a force called friction which resists motion

3: Displacement

[] Work is only "done" when the object or surroundings are having movement, or in motion, and this creates displacement

4: Force

[] A force is a push/pull in any direction, this is a simple definition so not much can be added.

5: Inertia

[] Inertia is a force that likes to remain unchanged, or without movement

6: Effort

[] "Meg is holding up weight without movement. She hasn't done any work since it did not move, but is tired. Why?" Effort! She still put in effort even though no "work" happened

7: Work

[] Force times displacement is the equation for work

8: Motion

[] Look back to #3, when there is motion we can tell work is done

Have a nice day!

     I hope this is what you are looking for, but if not - comment! I will edit and update my answer accordingly. (ノ^∇^)

- Heather

Equilibrium, friction, displacement, force, inertia

identify the vibrating media in three different types of musical instruments

Answers

Answer:

There are three basic categories of musical instruments: percussion, wind, and stringed instruments. Most musical instruments use resonance to amplify sound waves and make sounds louder. In a musical instrument, the whole instrument and the air inside it may vibrate when the head of the drum is struck.

Thoughts about Genetically Modified Crops
EXPLANATION PLZ NO EXAMPLES
BRAINLYIST FOR BEST ANSWER.

Answers

Well on the contrary to what the other person said , and it a good point overall but however you have another side to the argument or debate on such topic:
Although it might be beneficial for the farmers pockets There is a scientific consensus that currently available food derived from GM crops poses no greater risk to human health than conventional food, but that each GM food needs to be tested on a case-by-case basis before introduction. Nonetheless, members of the public are much less likely than scientists to perceive GM foods as safe. The legal and regulatory status of GM foods varies by country, with some nations banning or restricting them, and others permitting them with widely differing degrees of regulation.

However, opponents have objected to GM crops on grounds including environmental impacts, food safety, whether GM crops are needed to address food needs, whether they are sufficiently accessible to farmers in developing countries and concerns over subjecting crops to intellectual property law. Safety concerns led 38 countries, including 19 in Europe, to officially prohibit their cultivation.

i need help :>................

Answers

11.) Crest
12.) Compression
13.) Energy
14.) Mechanical Wave
I couldn’t read the rest of 15.
Hope this helps!
11. crest
12. compression (cuz the particles rly close together)
13. energy
14. mechanical waves

Please help me with this question,giving the first correct answer brainliest

Answers

Answer:

These elements are metalloids

Answer: C. Metalloids

Explanation:

Thank you for deleting that bot's answer.

analyze if the frequency of a sound wave increases what happnes to the wavelength

Answers

Answer:

it's either a b c or do I swear

Can you mark me brainliest please I’m trying to rank up!:)

Please help me with this question,giving the first correct answer brainliest

Answers

Answer:

A

Explanation:

Answer:

C. Metalloids

Explanation:

Metalloids

2.4 physics assignment.

Answers

Answer:The distance o the ramp that the car traveled is given by d=(1/2)at^2=(0.5)(3.96)(5.76)^2=65.69 meters. The horizontal component of this travel is 65.69*

Explanation:

How can you describe a mineral that sparkles, breaks into thin sheets, and has a measure of 9 on the hardness scale?

1. It is metallic, has cleavage, and can be easily scratched.
2.It is non-metallic, has cleavage, and can be scratched by a nail.
3.It is metallic, has cleavage, and can be scratched with special equipment.
or 4. It is non-metallic, does not have cleavage, and can be scratched with difficulty.

Answers

(Awnser is 1 because it is correct
3 . Because it is correct you cannot make thin foil by your hand it needs special equipment

By looking at the relative positions of the elements calcium, Ca, fluorine, F, sulfur, S, and oxygen, O, in the Periodic Table, which TWO descriptions are TRUE about calcium fluoride, CaF2, and sulfur dioxide, SO2?


CaF2 is an ionic compound, and SO2i is a covalent compound.


CaF2 is formed by covalent bonds, and SO2 is formed by ionic bonds.


CaF2 cannot conduct electricity when dissolved in water, but SO2 can.


CaF2 is a gas at room temperature, while SO2 has a high boiling point.


CaF2 has a high boiling point, while SO2 is a gas at room temperature.


CaF2 is soft at room temperature, while SO2 is hard and forms crystals.

Answers

Answer:

Calcium Compunds-The fluoride,CaF²,is important to the production of hydrofluoric acid,Wich is made from CaF² by the action of sulfuric acids.CaF² us used laboratory instruments as a window material both infrared and ultraviolet radiation.

Sorry if other question not answered

Calcium Compunds-The fluoride,CaF²,is important to the production of hydrofluoric acid,Wich is made from CaF² by the action of sulfuric acids.CaF² us used laboratory instruments as a window material both infrared and ultraviolet radiation.

Thus, Since the turn of the 20th century, glass has been made with calcium fluoride, a novel substance. It is a solid that dissolves readily in water and has a special physical and chemical makeup that makes it suitable for usage as a glassmaking material.

Glass used in windows, bottles, and other glass goods was formerly created from calcium silicates before the invention of this substance. The new glass, referred to as glass with added fluorides, has a number of advantages over calcium silicates, which have drawbacks that make them unsuitable for the creation of modern glass.

Calcium Fluorine is a naturally occurring element that is frequently found in rock, soil, plants, and animals.

Thus, Calcium Compunds-The fluoride,CaF²,is important to the production of hydrofluoric acid,Wich is made from CaF² by the action of sulfuric acids.CaF² us used laboratory instruments as a window material both infrared and ultraviolet radiation.

Learn more about Calcium fluoride, refer to the link:

https://brainly.com/question/28083686

#SPJ6

please answer all 5 ....

Answers

Answer:

a

Explanation:

just needed the points sorry

What is conduction ? Conduction is the process of which heat or electricity is transmitted through an object when there is a difference in temperature or electrical potential

A Chef is looking for a new frying pan that will allow her to cook food quickly at temperatures above 500°C. Use the data provided in the table to explain to the Chef which metal would be the best choice for a new frying pan for her kitchen.

What is your claim? Which metal is the best choice? (

What is your evidence?

What is your reasoning?

Answers

Answer:

Explanation:

1st one

What is your evidence?

Very heavy professional or restaurant pans will have iron handles, while those for home use will be made of brass or stainless steel. All are perfectly safe for oven use.

What is the Genetic Modification Process?


Brainlyist for the best answer

Answers

Answer:

GM is a technology that involves inserting DNA into the genome of an organism. To produce a GM plant, new DNA is transferred into plant cells. Usually, the cells are then grown in tissue culture where they develop into plants.

Explanation:

u could also use bacteria, it is really helpful for genetic modification

What is the Genetic Modification Process?

Brainlyist for the best answer

Answers

Answer:

Production of GMOs is a multistage process which can be summarized as follows:

1. identification of the gene interest;

2. isolation of the gene of interest;

3. amplifying the gene to produce many copies;

4. associating the gene with an appropriate promoter and poly A sequence and insertion into plasmids;

5. multiplying the plasmid in bacteria and recovering the cloned construct for injection;

6. transference of the construct into the recipient tissue, usually fertilized eggs;

7. integration of gene into recipient genome;

8. expression of gene in recipient genome; and

9. inheritance of gene through further generations.

Genetic modification (GM) is when the genome of an organism (like a plant or an animal) is changed when new genetic material is added. ... This is crossbreeding or selective breeding , which humans have used to change plants or animals for thousands of years, as well as things like gene manipulation .

explain how you can recognize the sound of a flute

Answers

The sound of a flute is poetic, light, mellow, and soft. Flute is a woodwind musical instrument produces the mild sound.

How flute produces sound?

Sound is a vibration that propagates as an acoustic wave, through a transmission medium such as solid, liquid ang gases. When an object vibrates, it causes a movement in surrounding air molecules. The molecules collide with the molecules close to them, causing them to vibrating as well.

The sound from flute comes due to the vibrating columns of air inside it. In a flute, the air gets vibrated and the resonator amplifies the vibration and gets modified into sound. When air is blown into the holes of flute, it creates the vibration in the air molecules inside the flute and hence, sound is produced.

The flute can produced continuous sound by the presence of number of holes in it. The flute sounds may be high pitch or soft tone depends on the position of upper and lower lips on flute.The sounds of flute are rich, gentle and gracefull.

Learn to more about sounds in flute :

https://brainly.com/question/10153629

#SPJ3

What are the positive impacts of Genetically Modified Crops?


Brainlyst for the best answer. :)

Answers

Answer:

The crops will have the ability to be resistant to certain diseases

The crops can be modified to meet certain criteria which means they can be used for medication and vaccines etc. So they can be modified to be stronger and to be more resistant to Ilness

Please help me with this question,giving the first correct answer brainliest

Answers

Answer:

Protons and Electrons (c)

Explanation:

I added my explanation in the comments of the question

Answer:

protons and neutrons

Explanation:

please mark me as brainliest

Please help me asap .

Answers

Answer:

We use the four properties of sound: pitch, dynamics (loudness or softness), timbre (tone color), and duration.

Answer:

Dynamics, Duration, Pitch, Timbre! Hope this helped

Explanation:

I have an Energy and temperature activity and I have questions to answer
I do not understand this question:
"Within a 24-hour period, at what three points should the temperature be taken? Why?"
Can somebody help me!!!

Answers

Answer:

8hours 16hours and 24 hours

Explanation:

this is because they 24÷3=8 so the time between the takings of the temperature are equal.

Divide 24 by 3 because 24 is the number of hours and 3 because it’s how many times you check it
24\3 = 8 or 8•3+24
So you would check the temperature every 8 hours
8 hours 16 hours 24 hours

Jennie observes her brother playing pool and has a theory that the potential energy in the pool stick is transformed into kinetic energy when he hits the ball.

Answers

Answer:

This theory is true and should continue to expand on this theory.

Explanation:

hope this helps.

When writing a scientific paper, look for the most credible sources. Science doesn’t show bias, but we humans tend to show bias. Beware of sites and articles that provide facts without proper scientific evidence. Avoid using information from such sites. You must be able to identify reliable sites so the data in your paper is credible.

Use sources that end in .gov (government sites), such as CDC.gov. They are reliable sources. You can also use sites ending in .edu. They can be deemed trustworthy, but sometimes the information is written by students rather than scientists. Always find out who the author of the article is before proceeding. Some .org and .com sites are credible, but you need to analyze the content to verify their authenticity. As you review a source, try to answer these questions:

Who authored the article?
Is this person a scientific expert in the species I’m researching?
What is the purpose of the article?
Does the article state facts that scientists can prove with evidence?
Are there opinions in the article?
How old is the article?
Do other credible sources support the statements in this article?
(HELP NOW!!!!!)

Answers

Answer:

hope this help :)

Explanation:

Cancer is the name given to a collection of related diseases. Cancer is more than one type of disease. In cancer, as a result of genetic mutations, this regulatory process malfunctions, resulting in uncontrolled cell proliferation. CAD, Stroke, Respiratory illness, COPD are all diseases related to cancer. Inherited genetic mutations play a major role in about 5 to 10 percent of all cancers. There are many environmental pathogenic factors that can cause cancer. For example , Tar and Coal-Tar Pitch , Emissions , Secondhand Tobacco Smoke (Environmental Tobacco Smoke) , Arsenic , Soot , Asbestos , Wood Dust. When cancer cells break away from a tumor, they can travel to other parts of the body through the bloodstream or the lymph system. Cancer is hard to treat in later stages because it probably has already spread through out the body. The grade of a cancer depends on what the cells look like under a microscope. In general, a lower grade indicates a slower-growing cancer and a higher grade indicates a faster-growing one. Some examples of cancer treatments of cancer are, Surgery, Chemotherapy, Radiotherapy, Cancer drugs, Hormone therapy, Stem cell and bone marrow transplants, Targeted cancer drugs. A new treatment involving a photosensitising agent that makes cells more sensitive to light and, by doing so, causes cancer cells to be destroyed when a laser light is directed on a cancerous area. One challenge is, druggable genomic alterations are diverse and represent only small subsets of patients in certain tumor types, which limits testing their clinical impact in biomarker-driven clinical trials. Next-generation sequencing technologies are increasingly being implemented for molecular prescreening in clinical research, but issues regarding clinical interpretation of large genomic data make their wide clinical use difficult.

What are the negative impacts on Genetically Modified Crops?

EXPLANATION ONLY NOT EXAMPLES PLZ

Brainlyist for best answer

Answers

One specific concern is the possibility for GMOs to negatively affect human health. This could result from differences in nutritional content, allergic response, or undesired side effects such as toxicity, organ damage, or gene transfer. Research indicates that GM crop technology can result in a net increase in herbicide use and can foster the growth of herbicide resistant weeds. In addition, there is concern that the use of GM crops may negatively impact the agriculture ecosystem.

When going from slower medium to a faster medium, light is bent _____.

Answers

Answer:

When going from slower medium to a faster medium, light is bent _downwards_.

Explanation:

hope this helps you!

how can i be a basketball player

Answers

Try practicing basketball in your free time and learn to love it. You can also apply to schools or teams that teaches basketball more. Get good teachers.

Can Someone help me i would really appreciate it

Answers

Answer: So pretty much all you have to do is explain why it's important to have a balanced life and use those Content Vocab words in the explanation you also might have to use the Academic Vocab words as well.

Hope this helps :)

Answer: I have no idea what that means

Explanation:

i need help please help me , god will bless you tonight .

Answers

Answer:

HEHEHE HA

Explanation:

Clash royale

Try googling it bc I’m not the best with this anymore

I need answers please i will give you 20

Answers

The answer is Yes! It will be louder but if you decrease the amplitude it will be softer
Other Questions
Which activity would be BEST for prolonged training within your target heart rate zone?-sprinting-stair climbing-static stretching-high intensity interval training Summarize Ghana's relationship with other empires using one word. Explain why this word was chosen. The score on a test are normally distributed with a Mean of 140 and a standard deviation of 28 find the score of that is one and a half standard deviation 140 standard deviation 28 score is one and a half standard deviation Find the product mentally of(ab+3)(ab-3) any one uses gachalife i needs some tips If the measure of one angle of an isosceles triangle is 60degree then the triangle is Help me please I dont know what to do summarize the objective of the crisis in your own words A triangle undergoes an enlargement as shown in thediagram below. What is x?Please help Ill give brainliest Renee is filming a scene in which the main character, who is afraid of heights, needs to climb a tree to rescue his catbut then panics when he realizes how enormous the tree is. In the short story on which the scene is based, the character expresses his fear by speaking to his cat, but Renee has decided to film the scene with no dialogue.What film technique could Renee use to convey the characters fear and to create drama? A bright lightingB a low camera angleC a cool color schemeD an eye-level camera angle The equations ? Its for a chemistry class, and he said we need to explain and write down the math problems? Solve the exponential equation by the method of relating the bases, first rewriting the equation in the form In Khan academy int he 8th grade section "Geometric transformation" in the section "Properties & definitions of transformations" how are you supposed to do this? If f(x) = 2 8, what is f(1. 8)? 4 6 10 12. Find the missing value in each row. Use the percent equation. A county has constructed a conical building to store sand. The cone has a height of 101 m and a diameter of 330 m. Find the volume of this building to the nearest hundredth. Use 3.14 for . Describe how parties are organized at the state level. Which of the following is a true statement? A. A number is divisible by two and three if the number ends in a 0, 2, 4, 6, or 8. B. A number is divisible by three and nine if the sum of the digits is divisible by three. C. A number is divisible by nine if the last two digits are divisibly by nine. D. A number is divisible by six if the number is divisible by both two and three. a train is leaving the station and goes from 3m/s to 30 m/s in 12 s. The acceleration of the train is CAN SOMEONE PLEASEE HELP??The face of feminism has changed in unexpected places by unsuspecting heroes. Take Gabrielle Coco Chanel, for example. Her modernist philosophy redesigned the way the world viewed women. By transforming the way women dressed during the 20th century, Coco Chanel granted femininity back to women. Little did the world know that a girl raised in an orphanage would liberate women from common stereotypical uniforms. Gabrielle Chanel was born in France in 1883. She was first inspired to reinvent clothes because she could not afford the fashionable garments of her time. Chanels job as a seamstress in the orphanage had given her the skills that she needed to redefine clothes for women. She opened her first shop outside of Paris, France with her uncles partnership. The store featured pullover sweaters and sailor jackets for men and displayed eye-catching straight skirts. The shop did not survive the tough competition of Paris. After a series of jobs and failed ventures, Chanels second millinery shop became a success. French actresses began wearing Chanels glamorous hats and helped establish her reputation. Chanels first designer item, the little black dress, was a stunning feat. Later, Chanel won critical acclaim for womens business suits which allowed females to look professional and glamorous at the same time. The fashion industry was taken by storm. Clothing originally designed for menlike business suits had been revamped for women.How can the reader tell what genre this is? A. It includes detail about the author's personal experiences. B. It is about a specific time period in Gabrielle Chanel's life. C. It is written by someone other than the person it's about. D. It shows the first person point of view using a descriptive style.