what is the distance between fringes produced by a diffraction grating having 130 lines per centimeter for 580 nm light, if the screen is 1.50 m away?

Explanation:

Tony's claim that solids do not have a lot of thermal expansion is partially true, but it is not entirely accurate. All materials, including solids, do undergo some degree of thermal expansion or contraction when their temperature changes. However, the amount of expansion or contraction varies depending on the material's coefficient of thermal expansion (CTE), which measures the material's response to temperature changes.

Some materials, like metals, have a high CTE and undergo significant expansion or contraction when their temperature changes. On the other hand, materials like ceramics and glasses have a low CTE and undergo relatively little expansion or contraction. Wood, which is the material used to make the door in Valdez's house, has a moderate CTE, meaning it undergoes some degree of expansion or contraction with changes in temperature.

Therefore, Valdez's argument is valid. The wooden door in his house experiences thermal expansion in the summer due to the higher temperatures. As the temperature increases, the particles in the wood gain kinetic energy, move faster, and create more space between each other, which results in the door expanding. Conversely, in the winter, the lower temperatures cause the particles in the wood to lose energy, move slower, and become closer to each other, which results in the door contracting.

In conclusion, while Tony's statement is correct in that solids do not have a lot of thermal expansion compared to liquids or gases, all solids, including wood, do experience some degree of thermal expansion or contraction due to changes in temperature.

The external forces acting on this system are: gravity and the tension in the string.

An Atwood machine is a system consisting of two masses, m, and m, connected by a string that passes over a pulley. In this system, the external forces are gravity and the tension in the string. Gravity pulls both masses downward, while the tension in the string acts in opposite directions on the two masses, pulling the heavier one down and the lighter one up.

The tension in the string is determined by the masses m and m and the acceleration of the system. If m is the heavier mass and m is the lighter mass, the tension in the string will be greater than if both masses had the same weight. This is because the tension must balance the gravitational forces on the two masses. The greater the mass, the greater the gravitational force, and the greater the tension in the string must be to balance it.

The acceleration of the system is determined by the masses, the tension in the string, and the amount of friction in the system. The greater the tension, the greater the acceleration, and the smaller the mass, the greater the acceleration. Friction acts against the acceleration, reducing the net acceleration of the system.

In summary, the external forces acting on an Atwood machine with two different masses m and m are gravity and the tension in the string. The tension in the string is determined by the masses and the acceleration of the system, while the acceleration is determined by the masses, the tension in the string, and the amount of friction in the system.

To know more about gravity refer here:

https://brainly.com/question/14874038#

#SPJ11

The rotational kinetic energy of a flywheel increases by 80% when its rotational speed increases by 40%. This is because the rotational kinetic energy of a flywheel is directly proportional to the square of its angular velocity.

The rotational speed of a flywheel increases by 40%. The percentage increase in its rotational kinetic energy is approximately 96.8%. Suppose the initial rotational speed of the flywheel is n1 and the initial rotational kinetic energy is K.E.1. After the speed of the flywheel is increased by 40 percent, the new speed is n2 = n1 + 0.4n1 = 1.4n1.

Then the new kinetic energy K.E.2 of the flywheel is given by K.E.2 = (1/2)I(n2^2)where I is the moment of inertia of the flywheel.Since n2 = 1.4n1, we have [tex]K.E.2 = (1/2)I(1.96n1^2) = 0.98I(n1^2).[/tex].

Therefore, the percentage increase in the rotational kinetic energy of the flywheel is approximately 96.8%.

Read more about energy:

https://brainly.com/question/13881533

#SPJ11

In a model ensemble system, meteorologists change the initial conditions each time they run a simulation of the same model.

An ensemble forecasting system consists of a group of forecasts for the same event that are produced using different input conditions. The model ensembles are created by initiating the forecasting system many times, each time with a different input or initial condition set, and then averaging the results to reduce the effect of errors due to the choice of the initial condition.

The forecast can be viewed as a probability distribution for the event, rather than a single forecast.The model ensemble forecasting technique can also improve confidence in forecasting by reducing the uncertainty caused by the different input conditions that can cause a significant error in the final results. The technique is most effective when the models being used are at least slightly different, but not so different as to be incompatible with one another.

Read more about the ensemble :

https://brainly.com/question/28221732

#SPJ11

The current in the solenoid becomes 3.56 A.

How to find current in the solenoid?

Number of turns in the solenoid, n = 100 turns/cm

Radius of the circular path of electron, r = 2.30 cm

Speed of electron, v = 0.0460c, where c is the speed of light

To find: Current in the solenoid, i

Formula used: Magnetic field inside the solenoid,

B = μ0ni Where, μ0 = 4π × 10⁻⁷ T m/A is the permeability of free spaceSolution:

The force on a moving electron in a magnetic field is given by

F = Bev

Where B is the magnetic field, e is the charge of an electron and v is its velocity.

The force acting on the electron provides the necessary centripetal force for the electron to move in a circle of radius r.

So,

Bev = (mev²)/r

where me is the mass of an electron

On simplifying the above equation, we get

Be = (mev)/r

Put the value of B from the formula of magnetic field inside the solenoid, B = μ0ni

we get

μ0ni = (mev)/r

Solve for i,

i = (mev)/(μ0nr)

Substitute the given values and solve

i = (9.109 × 10⁻³¹ kg × 0.0460c × 3 × 10⁸ m/s)/(4π × 10⁻⁷ T m/A × 100 turns/cm × 2.30 cm)i

= 3.56 A

Therefore, the current in the solenoid is 3.56 A.

Learn more about Magnetic field.

brainly.com/question/14848188

#SPJ11

If you do not wear your required glasses or corrective lenses while driving and are stopped by police, you may face fines or penalties for violating the law.

Depending on the state, you could be fined or your license could be suspended. To avoid these consequences, it is best to always wear your corrective lenses or glasses while driving.

Additionally, driving without your required glasses or corrective lenses may put you and others on the road at risk of accidents, which could result in property damage, injuries, or even fatalities.

Therefore, it is highly recommended that you always wear your required glasses or corrective lenses while driving to ensure the safety of yourself and others on the road.

To learn more about lenses:

https://brainly.com/question/28052359#
#SPJ11

The sound level produced by a chorus of 45 singers would be approximately 88.3 dB.

Assuming that the sound level of each singer is independent and the same, the sound level produced by a chorus of 45 singers can be calculated using the following formula:

L2 = L1 + 10 log (N2/N1)

where:

L1 = the sound level of one singer = 71.8 dB

N1 = the number of singers in the original group = 1

N2 = the number of singers in the new group = 45

L2 = the sound level of the new group

Substituting the values in the formula, we get:

L2 = 71.8 + 10 log (45/1)

L2 = 71.8 + 10 log (45)

L2 = 71.8 + 16.5

L2 = 88.3 dB

Therefore, the sound level produced by a chorus of 45 singers would be approximately 88.3 dB, assuming all the singers are singing at the same intensity at approximately the same distance as the original singer.

Learn about sound level here https://brainly.com/question/15118883

#SPJ1

The speed of sound in pure helium is approximately 1006.4 m/s.

When a sound wave travels through a medium, it produces a series of compressions and rarefactions in the medium, which causes the particles of the medium to vibrate. The speed of sound in a particular medium depends on the physical properties of the medium, such as its density, elasticity, and temperature.

The speed of sound in helium can be calculated using the formula,

speed of sound = frequency x wavelength

Given that the frequency of the sound is 170 Hz and the wavelength is 5.92 m, we can plug in these values and get,

speed of sound = 170 Hz x 5.92 m

speed of sound = 1006.4 m/s

To know more about sound, here

brainly.com/question/17095610

#SPJ4

Answer: According to Newton's third law of motion, when you toss a backpack full of heavy books towards your friend while standing on a skateboard or in-line skates, there will be an equal and opposite reaction force acting on you, causing you to move in the opposite direction, which may be backward due to the conservation of momentum.

The natural length of the spring is therefore 12.97 cm.

The natural length of the spring is found by calculating the spring constant using the Hooke's law formula. Spring constant (k) = Force (F) / extension (x). The natural length of the spring refers to the length of the spring when it is not carrying any load. Hooke's law states that the force required to extend or compress a spring by a distance x is proportional to that distance. Mathematically, F=kx, where F is the force applied, x is the displacement from the equilibrium position, and k is the spring constant. To find the natural length of the spring, we need to calculate the spring constant.

To do this, we use the data given in the problem. A load of 12 kg stretches the spring to a total length of 15 cm. We can find the force applied by multiplying the load by the acceleration due to gravity (g), which is 9.8 m/s^2. Thus, F = mg = 12 * 9.8 = 117.6 N. The extension of the spring is given as x = 15 cm - x0, where x0 is the natural length of the spring. Thus, x = 0.15 m - x0. Substituting these values into Hooke's law, we get: k = F/x = 117.6/(0.15 - x0)

Similarly, when a load of 30 kg stretches the spring to a length of 18 cm, we can find the force applied as F = mg = 30 * 9.8 = 294 N. The extension is given as x = 0.18 m - x0. Substituting these values into Hooke's law, we get: k = F/x = 294/(0.18 - x0)

Now we have two equations for k, so we can set them equal to each other: 117.6/(0.15 - x0) = 294/(0.18 - x0) Cross-multiplying and simplifying, we get: 117.6(0.18 - x0) = 294(0.15 - x0) 21.168 - 117.6x0 = 44.1 - 294x0 176.4x0 = 22.932 x0 = 0.1297 m

The natural length of the spring is therefore 12.97 cm.

For more such questions on Hooke's law.

https://brainly.com/question/30611861#

#SPJ11

The region in which it is possible to change the phase of x by raising or lowering the temperature is: phase transition region.

This region is typically marked by an increase in pressure and a decrease in temperature. Temperature and pressure are inversely proportional to one another within this region, meaning that as pressure increases, temperature decreases and vice versa.

The exact temperature and pressure at which the phase transition occurs depends on the type of material being transitioned and its individual characteristics. For example, water boils at 100°C and 1 atm of pressure while other substances may have different boiling points.

To know more about pressure refer here:

https://brainly.com/question/30673967#

#SPJ11

Neutron stars with a mass of 1.4 solar masses will have around 1.8 x [tex]10^5^7[/tex] neutrons, are composed almost entirely of neutrons and have approximately twice the mass of the sun.

Neutron stars are composed almost entirely of neutrons and have approximately twice the mass of the sun. On average, neutron stars have about 1.4 solar masses, or 2.8 x [tex]10^3^0[/tex] kg. This means that one cubic centimeter of neutron star material has a mass of around 2.2 x [tex]10^1^4[/tex] kg. Each cubic centimeter of neutron star material contains about 1.6 x [tex]10^4^5[/tex] neutrons, or around one hundred trillion trillion neutrons. Thus, a neutron star with a mass of 1.4 solar masses will have around 1.8 x [tex]10^5^7[/tex] neutrons.

For more such questions on Neutron stars.

https://brainly.com/question/28271936#

#SPJ11

The given circuit has two 1.5 V batteries connected in series with a 132.5-ohm resistor. The task is to calculate the current in the circuit in milliamps (mA). Let's solve this problem step by step.

Step 1: Find the equivalent voltage of the batteries connected in series.

Voltage of one battery is 1.5 V

Total voltage = Voltage of Battery 1 + Voltage of Battery 2

Total voltage = 1.5 V + 1.5 V = 3 V

Step 2: Calculate the current in the circuit using Ohm's law, V = IR.

I = V/R

I = 3 V/132.5 Ω

I = 0.0226 A

Since the current is in Amperes (A), we have to convert it into milliamperes (mA).

1 A = 1000 mA0.0226 A = 22.6 mA

So, the current in the circuit is 22.6 mA.

To know more about the Current in a circuit, refer here:

https://brainly.com/question/12618565#

#SPJ11

The acceleration of the dancer who applies a horizontal force of -800 N on the dance floor will be 13.33 m/s².

The formula used to calculate acceleration is as follows:F = m × a

where,F is the force,m is the mass, and,a is the acceleration

Substituting the given values in the above formula, we get:

-800 N = 60 kg × a

We can solve this equation for a, which will give us the acceleration of the dancer.

a = (-800 N) / (60 kg) = -13.33 m/s²

Therefore, the acceleration of the dancer will be 13.33 m/s².

To learn more about acceleration:

https://brainly.com/question/12550364#
#SPJ11

The amount of heat that left the system is 11.7 joules (given as a positive number).

When a piston is compressed fully with gas and 8.4 joules of work is done on it, and the internal energy (u) of the system is increased by 3.3 joules, we need to determine the amount of heat that left the system.

To determine the amount of heat that left the system, we need to use the First Law of Thermodynamics, which states that the change in internal energy (u) of a system is the sum of the heat (q) added to it and the work (w) done on it, which can be represented as:

u = q + w

Where, u = Change in internal energy of the system

q = Heat added to the system

w = Work done on the system

From the given information, w = -8.4 J (since work was done on the system), and u = 3.3 J.

Therefore, substituting these values in the above equation, we get:

3.3 J = q + (-8.4 J)3.3 J + 8.4 J

q = 11.7 J

For more question on heat click on

https://brainly.com/question/934320

#SPJ11

Jack does -1967.4 J of work on the boat.

There are four steps to get the final value:

First, we can use the work-energy principle

This states that the net work done on an object is equal to its change in kinetic energy.

We can also use Newton's second law, which relates the net force on an object to its acceleration:

F = ma

where F is the net force acting on the boat,

m is its mass, and

a is its acceleration.

To calculate the net force, we need to add up the individual forces exerted by Jack and Jill:

F= Fjack+ Fjill

where Fjack is the force exerted by Jack, and Fjill is the force exerted by Jill.

The net force can be calculated as:

F = <-440, 0, 220> + <150, 0, 300>

  = <-290, 0, 520> N

Second, The boat's acceleration can be calculated using Newton's second law:

F= ma

a = F / m

a = <-290, 0, 520>  / 3200

a = <-0.0906, 0, 0.1625> m/s^2

Third, The boat's final velocity can be calculated using its initial velocity, its acceleration, and the displacement:

vf^2 = vi^2 + 2ad

where vi is the initial velocity,

a is the acceleration,

d is the displacement, and

vf is the final velocity.

The displacement can be calculated as:

d = |<6, 0, 1>  - <2, 0, 3>

  = |<4, 0, -2>

  = sqrt(4^2 + 0^2 + (-2)^2)

  = 4.47 m

Plugging in the values, we get:

vf^2 = (1.6 )^2 + 2 * (-0.0906 ) * 4.47

= 1.89

= 1.37 m/s

Therefore, the final speed of the boat is 1.37 m/s.

Fourth, To calculate the work done by Jack, we can use the formula:

W = F * d

where F is the force exerted by Jack, and

d is the displacement of the boat.

Plugging in the values:

W = <-440, 0, 220>  * 4.47

W = -1967.4 J

Therefore, Jack does -1967.4 J of work on the boat.

For more reference to work done please refer to:

https://brainly.com/question/13662169

Answer:

You can perform an experiment to determine if the mass of a cart has any effect on the amount of energy needed to overcome friction. To do this, you will need a cart, something to put on the cart to increase its mass, a surface with a known coefficient of friction, a ruler or measuring tape, and a scale.

First, measure the distance the cart needs to travel over the surface. Then, measure the mass of the cart without any additional weight. Place the cart at the starting point of the measured distance and release it, timing how long it takes to travel the measured distance. Record this time and repeat this step three times.

Next, add a known mass to the cart and repeat the experiment, measuring how long it takes for the cart to travel the measured distance. Record this time and repeat this step three times. Finally, compare the times for the cart with and without the additional weight and note any differences.

This experiment can be used to determine if the mass of a cart has any effect on the amount of energy needed to overcome friction.

Learn more about friction here:

https://brainly.com/question/28356847#

#SPJ11

The final answer are work required to compress the spring from 12 cm to 10 cm is 19.6 J.

The spring's energy and the work it does are both proportional to the amount it stretches or compresses. According to Hooke's Law, the force needed to stretch or compress a spring is proportional to the amount it is stretched or compressed.

Given the spring constant and the total energy stored in the spring, one may figure out how much energy is necessary to compress the spring from a particular point to another using this method. What is the work required to compress the spring from 12 cm to 10 cm?

The work required to compress the spring from 12 cm to 10 cm is calculated using the following formula; W=1/2 k (x_2^2 - x_1^2) where W is the work done by the spring ,k is the spring constant,x1 is the initial position, andx2 is the final position.

Determine the spring constant using the formula, F=kx k=\frac{F}{x}k=\frac{mg}{x} k=\frac{30*9.8}{0.15} k=1960\ N/m Since the spring is being compressed, the value of x2 is smaller than x1.

To find the value of work done by the spring when compressed from x1 to x2, the difference between the potential energies corresponding to these positions is taken.

Thus, the work done by the spring is: W=1/2 k (x_2^2 - x_1^2) W=1/2 (1960) (0.12^2 - 0.10^2) W=19.6\ J

Thus, the work required to compress the spring from 12 cm to 10 cm is 19.6 J.

To know more about spring refer here:

https://brainly.com/question/14670501#

#SPJ11

The landing speed of the ball in the absence of air resistance would be 14 m/s.

The landing speed of an object in the absence of air resistance can be calculated by considering the conservation of energy.

The initial energy of the object will be equal to the final energy of the object when it reaches the ground.

A ball falling from a height h with an initial velocity u.

The gravitational potential energy of the ball is given by mgh, where m is the mass of the ball, g is the acceleration due to gravity, and h is the height of the ball.

The kinetic energy of the ball is given by 1/2 mu², where u is the initial velocity of the ball.

At the ground level, the gravitational potential energy of the ball will be zero, and the kinetic energy of the ball will be given by 1/2 mv², where v is the velocity of the ball when it reaches the ground.

mgh + 1/2 mu² = 1/2 mv²

Solving for v, we get:

v = sqrt(2gh + u²)

In the absence of air resistance, the ball will continue to fall with an acceleration of g. Therefore, we can assume that the initial velocity u is equal to zero. Thus, the equation reduces to:

v = sqrt(2gh)

g = 9.8 m/s², we can calculate the landing speed of the ball for a given height h. For example, if the ball is dropped from a height of 10 meters, then the landing speed of the ball will be:

v = sqrt(2gh) = sqrt(2*9.8*10) = 14 m/s

Therefore, the landing speed of the ball in the absence of air resistance would be 14 m/s.

to know more about resistance refer here:

https://brainly.com/question/30799966#

#SPJ11

750.0 g of water at a temperature of 15.4°C will absorb 9,117.2 calories of thermal energy to increase its temperature to 86.3°C. This can be calculated by using the specific heat formula:
Q = m * c * ΔT
where:

Q = thermal energy (calories)

m = mass of water (g)

c = specific heat (calories/g°C)

ΔT = change in temperature (°C)

Therefore:
Q = 750.0 g * 4.184 calories/g°C * (86.3°C - 15.4°C)
Q = 9,117.2 calories
Thermal energy is the energy generated in the form of heat. It is a type of kinetic energy that is produced by moving particles that makeup matter. The movement of molecules generates heat energy in the form of kinetic energy. The faster the molecules move, the more thermal energy is generated.

Read more about the topic of thermal energy:

https://brainly.com/question/19666326

#SPJ11

The other tuning fork will vibrate at either 293.0 Hz or 884.0 Hz, as these are the two frequencies that are an octave away from 588.0 Hz.

Assuming that the second tuning fork is identical to the first one, the possible vibration frequencies of the second tuning fork can be determined based on the principle of resonance.

When two tuning forks of the same frequency are placed near each other, the sound waves produced by one fork will cause the other fork to vibrate at the same frequency, resulting in a resonance effect.

The frequency of the first tuning fork is given as f1 = 588.0 Hz.

The frequency of the second tuning fork (f2) that will produce resonance with the first tuning fork can be calculated using the formula:

f2 = nf1

where n is a positive integer (1, 2, 3, ...) representing the harmonic number.

Therefore, the possible vibration frequencies of the second tuning fork are:

For n = 1, f2 = 1 × 588.0 Hz = 588.0 Hz

For n = 2, f2 = 2 × 588.0 Hz = 1176.0 Hz

For n = 3, f2 = 3 × 588.0 Hz = 1764.0 Hz

and so on.

Note that in practice, the second tuning fork may not be identical to the first one, and there may be slight variations in the vibration frequencies due to factors such as manufacturing tolerances, temperature, and humidity.

Learn more about vibration frequencies at: https://brainly.com/question/26082584

#SPJ11

The possible vibration frequencies of the second tuning fork are 1176 H.

A tuning fork is a tool that produces a pure musical tone when struck. The tone is usually the musical note that corresponds to the tool's vibration frequency. The tines on a tuning fork are constructed of a long steel rod that has been forged into the shape of a U. The tines are then cut to the proper length and shape to allow them to vibrate at a certain frequency.

One of the forks is known to vibrate at 588.0 Hz. The possible vibration frequencies of the second tuning fork are multiples of 588.0 Hz. When two tuning forks are struck, they will vibrate in sympathy with one another if their vibration frequencies are the same or a multiple of the same frequency. Therefore, the possible vibration frequencies of the second tuning fork are 588.0 Hz × 2 = 1176 Hz.

For more information about tuning fork refers to the link: https://brainly.com/question/13032605

#SPJ11

Explanation:

Nonmetals tend to gain electrons and become anions. For example, in Fig. 2.22 A, a neutral oxygen atom (O), with eight protons and eight electrons, gains two electrons. This gives it two more negative charges than positive charges and an overall charge of 2–.

The force required to stop a car of mass 1400 kg in 2 seconds if it is moving with a velocity of 10 m/s is 7000 N in the opposite direction to the car's motion.

Calculate the force required to stop a car of mass 1400 kg in 2 seconds if it is moving with a velocity of 10 m/s.

To solve the given problem, we can use the equation:

F = (m * Δv) / Δt

where F = force

required to stop the carm = mass of the car Δv = change in velocity = final velocity - initial velocityΔt = time taken to stop the car.

Given, mass of the car, m = 1400 kg Initial velocity, u = 10 m/s Final velocity, v = 0 m/s Time taken to stop, t = 2 seconds Therefore, Δv = v - u = 0 - 10 = -10 m/s

Substituting the given values in the above equation, we get:

F = (m * Δv) / Δt = (1400 kg * (-10 m/s)) / (2 s) = -7000 N

Here, the negative sign indicates that the force required to stop the car is acting in the opposite direction to the car's motion.

for such more question on force

https://brainly.com/question/12785175

#SPJ11

The height h will stay the same when a new block of mass m is used and makes an elastic collision.

Thus, the correct answer is to stay the same.

An elastic collision is a type of collision in which the total kinetic energy of two or more bodies involved in the collision is conserved. In this collision, the colliding bodies return to their initial state before the collision. That is, the total momentum and kinetic energy are conserved.

As a result, the initial and final energies of the system remain the same, implying that the height of the rod will stay the same as before. So, the height h will stay the same.

For more information about elastic collision refers to the link: https://brainly.com/question/2356330

#SPJ11

Answer:

hdjsigosorodcdjjgjejfiroodofohov jdjvjwigioeofe

The statement that is true for an object traveling to the right along the axis at a speed of with acceleration is "the object will slow down, eventually coming to a complete stop. So, Option A is correct.

Kinetic Friction is the resistive force that opposes the movement or motion of two interacting surfaces in relative motion. It is due to the interactions between surfaces when there is some movement between the two. The frictional force opposes the motion of the object and tends to bring it to a halt or slow it down.

Let us now consider the given options:

(a) The object will slow down, eventually coming to a complete stop. This statement is true. The object will slow down and come to a complete stop.

(b) The object cannot have a negative acceleration and be moving to the right. Thus, this statement is not true. The object can have a negative acceleration and still be moving to the right.

(c) The object will continue to move to the right, slowing down but never coming to a complete stop. Thus, this statement is not true. The object will come to a complete stop.

(d) The object will slow down, moment. Thus, this statement is not complete. It does not explain what will happen after slowing down.

Therefore, option (a) is the correct option.

To know more about Kinetic Friction, refer here:

https://brainly.com/question/30886698#

#SPJ11

Answer:

Conduction

Explanation:

The process by which heat energy is transmitted through collisions between neighboring atoms

The quantity that describes the ability of a force to rotate an object is torque. It differs from a force in that it is a rotational force, not a linear force. Torque depends on the force applied and the distance from the point of application to the pivot point.

Torque is the measure of the ability of a force to cause rotational motion. It is defined as the product of the force and the distance between the point of application of the force and the pivot point or axis of rotation. Unlike a linear force, which produces linear motion, a torque produces rotational motion. The unit of torque is the newton-meter (N·m) in the SI system.

Learn more about pivot point at: https://brainly.com/question/29515099

#SPJ11

The kinetic energy of the cat is 177.15 Joules.

The kinetic energy of the cat can be calculated using the formula K = 0.5mv2, where m is the mass and v is the velocity.

The cat has a mass of 4.50 kg and is running at a velocity of 6.70 m/s, so we can substitute these values into the formula to find the kinetic energy:

K = 0.5 * 4.50 kg * (6.70 m/s)2

K = 177.15 Joules

Kinetic energy is the energy possessed by an object due to its motion. It is calculated by multiplying half of the object's mass by its velocity squared.

The cat has a mass of 4.50 kg and is running at a velocity of 6.70 m/s, so its kinetic energy is 177.15 Joules.

to know more about kinetic energy refer here:

https://brainly.com/question/26472013#

#SPJ11

(a) The magnitude of electric field in the region between the plates is [tex]\mathbf{9 , 2 5 0}$ $\mathrm{V} / \mathrm{m}$.[/tex]

(b) The magnitude of the force the field exerts on a particle with the given charge i[tex]s $2.22 \times 10^{-5} \mathrm{~N}$.[/tex]

(c) The work done by the field on the particle as it moves from the higher potential plate to the lower is[tex]$8.88 \times 10^{-7} \mathrm{~J}$.[/tex]

(d) the change of the potential energy is[tex]$8.88 \times 10^{-7} \mathrm{~J}$.[/tex]

(a) The magnitude of electric field in the region between the plates is calculated as;

[tex]$$\begin{aligned}& E=\frac{V}{d} \\& E=\frac{370}{40 \times 10^{-3}} \\& E=9,250 \mathrm{~V} / \mathrm{m}\end{aligned}$$[/tex]

(b) The magnitude of the force the field exerts on a particle with the given charge is calculated as follows;

[tex]$$\begin{aligned}& F=E q \\& F=9,250 \times 2.4 \times 10^{-9} \\& F=2.22 \times 10^{-5} \mathrm{~N}\end{aligned}$$[/tex]

(c) The work done by the field on the particle as it moves from the higher potential plate to the lower is calculated as follows;

[tex]$$\begin{aligned}& W=F d \\& W=2.22 \times 10^{-5} \times 40 \times 10^{-3} \\& W=8.88 \times 10^{-7} \mathrm{~J}\end{aligned}$$[/tex]

(d) the change of the potential energy is calculated as;

[tex]$$\begin{aligned}& \Delta U=q \Delta V \\& \Delta U=q\left(V_1-V_2\right)\end{aligned}$$$$\text { DeltaU }=2.4 \times 10^{-9}(370)$$$$\Delta U=8.88 \times 10^{-7} \mathrm{~J}$$[/tex]

Learn more about electric field

https://brainly.com/question/15170044

#SPJ4

Full Question: Two large, parallel, metal plates carry opposite charges of equal magnitude. They are separated by a distance of 40.0 mm, and the potential difference between them is 370 V

A. What is the magnitude of the electric field (assumed to be uniform) in the region between the plates?

B. What is the magnitude of the force this field exerts on a particle with a charge of 2.40 nC ?

C. Use the results of part (b) to compute the work done by the field on the particle as it moves from the higher-potential plate to the lower.

D. Compare the result of part (c) to the change of potential energy of the same charge, computed from the electric potential.