what kind of pressure prevents a white dwarf from collapsing?

The amount of force that the pitcher applies to the baseball is 11.6N.

Force is a physical quantity that denotes ability to push, pull, twist or accelerate a body. It can be calculated by multiplying the mass of the object by its acceleration as follows;

Force = mass × acceleration

According to this question, a baseball has a mass of 145 g. A pitcher throws the baseball so that it accelerates at a rate of 80 m/s². The force applied on the baseball can be calculated as follows:

Force = 145/1000 kg × 80m/s²

Force = 11.6N

Learn more about force at: https://brainly.com/question/25116504

#SPJ1

To change 500g of water at room temperature (20°C) to steam at 100°C, you will need to add 1128.500 kJ of heat. This is because water requires a certain amount of heat energy, called the 'latent heat of vaporization', to turn from a liquid to a gas.

Mass of water (m) = 500g

Initial temperature ([tex]T_i[/tex]) = 20°C

Final temperature ([tex]T_f[/tex]) = 100°C

The heat of vaporization ([tex]H_{vap}[/tex]) = 2260 J/g.

To calculate the amount of heat required to convert 500 g of water at room temperature to steam at 100°C, we will use the formula:

[tex]Q = m \times H_{vap}\\Q = 500 g \times 2260 J/g\\Q = 1128500 J[/tex]

Therefore, it would take 1130000 J of heat to change this water to steam at 100°C.

For further detail on latent heat of vaporization, click on the below link:

https://brainly.com/question/30762921

#SPJ11

The amount of heat lost through a 3' x 5' single-pane window with a storm that is exposed to a temperature differential is 108 BTU per hour.

The U-factor is a measure of how well a window insulates against heat transfer. The lower the U-factor, the better the window insulates.

Using these factors, we can calculate the rate of heat loss through the window in units of BTUs per hour.

Assuming a U-factor of 1.2 and a temperature difference of 60°F, the calculation would be:

Heat Loss = 1.2 BTU/(hrft^2F) x 15 ft^2 x 60°F

Heat Loss = 108 BTU/hour

Therefore, the heat lost through the window is 108 BTU per hour.

To know more about heat loss click here:

https://brainly.com/question/14228650

#SPJ11

Complete Question:

How much heat is lost through a 3' × 5' single-pane window with a storm that is exposed to a 60 Fahrenheit temperature differential?

In statistical mechanics, the partition function (denoted as Q) is a mathematical function that describes the distribution of energy among the possible microstates of a system in thermodynamic equilibrium. The partition function depends on the energy levels and degeneracies of the system, as well as on the temperature and other external parameters.

The Boltzmann factor (denoted as e^(-E/kT)) is a term that appears in the partition function and represents the probability of a system occupying a particular energy level. Here, E is the energy of the level, k is the Boltzmann constant, and T is the temperature of the system in Kelvin. The Boltzmann factor is derived from the Boltzmann distribution, which is a probability distribution that describes the occupation of energy levels in a system.

The Boltzmann factor can be used to estimate the probability of a system occupying a particular energy state by comparing the Boltzmann factors for different states. The ratio of the Boltzmann factors for two energy states gives the relative probability of the system occupying each state. For example, if the ratio of the Boltzmann factors for two energy levels is 10:1, then the system is 10 times more likely to occupy the lower energy level than the higher energy level at that temperature.

Overall, the partition function and the Boltzmann factor are fundamental concepts in statistical mechanics that allow us to describe the distribution of energy among the microstates of a system in thermal equilibrium and estimate the probability of the system occupying specific energy states.

For more question on thermodynamic click on

https://brainly.com/question/13059309

#SPJ11

The principle that states that the buoyant force experienced by an object is exactly equal to the weight of the fluid displaced is known as Archimedes' Principle. What is Archimedes' Principle? Archimedes' Principle is a scientific law that explains how objects behave in fluids (liquids and gases).

The buoyant force of an object in a fluid is equal to the weight of the fluid displaced by the object according to this principle. This principle is valid for any fluid and any object as long as the buoyancy and weight of the object and fluid are calculated correctly.

The force that causes objects to float or sink in fluids is known as buoyancy. The buoyant force on an object is the net upward force exerted by the fluid in which the object is submerged.

When an object is immersed in a fluid, the fluid exerts an upward force on the object. This buoyant force opposes the weight of the object and causes it to float if the buoyant force is greater than the weight of the object.

To know more about buoyant force refer here:

https://brainly.com/question/21990136#

#SPJ11

The distance between your eye and the image of the butterfly in the mirror is: the same as the distance between your eye and the actual butterfly

The distance between your eye and the image of the butterfly in the mirror is the same as the distance between your eye and the actual butterfly, which is the sum of the distance from your eye to the mirror and the distance from the mirror to the butterfly.

To calculate this, we need to measure the distance from your eye to the mirror, which can be done using a ruler or tape measure, and then measure the distance from the mirror to the butterfly, which can be done using a ruler or tape measure as well. Once we have these two measurements, we can simply add them together to get the total distance between your eye and the image of the butterfly in the mirror.

To clarify further, let's use an example. If your eye is 10 cm away from the mirror and the butterfly is 30 cm away from the mirror, then the total distance between your eye and the image of the butterfly in the mirror is 40 cm. This is because 10 cm (from your eye to the mirror) + 30 cm (from the mirror to the butterfly) = 40 cm.

To know more about distance refer here:

https://brainly.com/question/15172156#

#SPJ11

The Norton's equivalent circuit and equivalent resistance of the given circuit is leq = 2.5 A, Req = 2 ohms. The correct answer is option b.

Norton's equivalent current, iNorton is calculated by dividing the voltage source by the series resistance of R2 and R3.

iNorton = V1 / (R2 + R3)

iNorton = 10 / (8 + 8)

iNorton = 0.625 A

Norton's equivalent resistance, RNorton is calculated by using the formula;

RNorton = R2 || R3

RNorton = (R2 x R3) / (R2 + R3)

RNorton = (8 x 8) / (8 + 8)RNorton = 4 ohms

Therefore, Norton's equivalent circuit is given by the current source of 0.625 A and the resistance of 4 ohms, connected across terminals a and b. The correct answer is option B; leq = 2.5 A, Req = 2 ohms.

To know more about equivalent resistance click here:

https://brainly.com/question/12286223

#SPJ11

Answer : If an object falls freely from rest on a planet where the acceleration due to gravity is 20 m/s2 then after 5 seconds, the object will have a speed of  100 m/s

This can be calculated using the equation v = a*t, where v is the velocity, a is the acceleration due to gravity, and t is the time elapsed. Therefore, in this case, v = 20 m/s2 * 5 s = 100 m/s.  These values are given in question, so we just have to put them in equation.

Since the object is falling freely, its acceleration remains constant and it follows a uniform acceleration motion. Therefore, the velocity of the object will increase linearly with time. After 10 seconds, the velocity will double to 200 m/s, and so on.

Know more about gravity here:

https://brainly.com/question/14874038

#SPJ11

The speed acquired by the body is 49m/s and 59m/s respectively.

The speed can be calculated using the formula:

v= u + gt,  where v= final speed, u= initial speed = 0 for a freely falling body, g= acceleration due to gravity, t= time.

The speed acquired by a freely falling object 5 seconds after being dropped from a rest position is 49 m/s. This is because an object dropped from rest will accelerate at a rate of 9.8 m/s², so after 5 seconds it will be moving at a speed of 5 * 9.8 = 49 m/s.

The speed 6 seconds after being dropped from a rest position is approximately 59 m/s. This is because an object dropped from rest will accelerate at a rate of 9.8 m/s², so after 6 seconds it will be moving at a speed of 6 * 9.8 = 58.8 m/s.

In summary, the speed of an object dropped from rest 5 seconds after being dropped is 49 m/s, and 6 seconds after it is approximately 59 m/s.

To know more about speed, refer here:

https://brainly.com/question/17661499#

#SPJ11

The average speed of the particle is  4.7 calculated by dividing the total distance traveled by the time taken.

The particle's average speed in m/s is 4.7. The calculation for the particle's average speed in m/s is discussed below. Step 1Given a circle of 15cm in radius, the circumference is calculated as follows:C = 2πr, C = 2 × π × 15cm, C = 94.25cm.

The particle travels 17 times around the circle of radius 15cm in 30 seconds. Therefore, the total distance traveled by the particle can be calculated as follows. Total Distance = 17 × Circumference. Total Distance = 17 × 94.25cm. Total Distance = 1602.25cm. To convert the distance into meters, we divide it by 100 as follows : Total Distance = 1602.25cm = 16.0225m. Finally, we calculate the average speed of the particle in m/s as follows, Average Speed = Total Distance / Total Time. Average Speed = 16.0225m / 30s. Average Speed = 0.534m/s × 8.75 = 4.7. Therefore, the particle's average speed in m/s is 4.7.

Read more about speed:

https://brainly.com/question/13943409

#SPJ11

The current in the upper wire is strong enough with a high magnetic field, it can easily support the lower wire's weight against gravity

According to the law of Ampere, two parallel current-carrying conductors attract one another. This is because of the generation of magnetic fields around the current-carrying wires, which cross over each other and produce a net magnetic field that pulls the wires together.

Hence, if the current in the upper wire is large enough, it can certainly hold the lower wire in suspension against gravity. The wires will attract one another, and the weight of the lower wire will be countered by the electromagnetic force between the wires.

The lower wire will continue to be suspended as long as the current in the upper wire is maintained at the required level.

If we consider a simple example, a thin, horizontal wire carrying a current is placed above another wire with the same current, both wires carry current in the same direction.

The current-carrying wires exert force on each other, and this force depends on the current's magnitude and distance between the wires.

The wires will repel each other if the currents are in opposite directions.  If they are in the same direction, the wires will attract each other. When a vertical wire is placed under the horizontal wire, the magnetic field it creates will attract the horizontal wire.

For similiar question on magnetic field

https://brainly.com/question/26257705

#SPJ11

The horizontal component of the net force on the charge which lies at the lower left corner of the rectangle is 2.62 × 10⁻⁴ N.

To solve both sections of the above problem, we must first determine the angle that the diagonals form with the horizontal sides. This could be given as:

θ = [tex]tan^{-}( \frac{9}{28})[/tex] = 17.82°.

Horizontal component:

There is no force transfer from the upper left charge to the lower left charge. So, the negative charges on the right will be the only ones we focus on.

Using Coulomb's law, force due to lower right charge can be given as:

[tex]k\frac{q^{2} }{D^{2} } = (9 * 10^{9})\frac{35^{2} * 10^{-18} }{28^{2}*10^{-2} }[/tex] = 1.41 × 10⁻⁴N.

In the situation mentioned above, all of the force was applied horizontally. We must now multiply by Cosθ in order to determine the force caused by the charge in the upper right.

[tex]F = k\frac{Q^{2} }{D_{1}^{2}+ D_{2} ^{2} } = 9*10^{9} \frac{35^{2}*10^{-18} }{(28^{2} *100^{-2})+ (9^{2} *100^{-)2} }[/tex] Cos (17.82°)N = 1.21 × 10⁻⁴N.

Therefore, the total force is equivalent to 2.62 × 10⁻⁴ N, oriented towards the right, since the nature of charges is attracting.

To know more about the horizontal components, refer:

https://brainly.com/question/25705666

#SPJ4

Complete question is:

Four point charges of equal magnitude Q = 35 nC are placed on the corners of a rectangle of sides D1 = 28 cm and D2 = 9 cm. The charges on the left side of the rectangle are positive while the charges on the right side of the rectangle are negative. Use a coordinate system fixed to the bottom left hand charge, with positive directions as shown in the figure.

Calculate the horizontal component of the net force, in newtons, on the charge which lies at the lower left corner of the rectangle.

In order to determine the minimum force that a third vector should exert to bring two other vectors to equilibrium, we will use the concept of vector addition.

Here is some steps:

This is because the third vector must be strong enough to cancel out the net force acting on the system. If the third vector has a magnitude less than Vector A + Vector B, then the system will not be in equilibrium.

For example, suppose Vector A has a magnitude of 5 N and Vector B has a magnitude of 3 N.

Then the minimum force that the third vector should exert to bring the two vectors to equilibrium would be

5 N + 3 N⇒8 N

To know more about the "force": https://brainly.in/question/23858054

#SPJ11

Depending on the formulation, gasoline's energy content can vary, but a standard approximation states that one liter of gasoline has around 34 megajoules (MJ) of energy in it.

A liter of gasoline has 31,536,000 joules of energy, which helps to put joules in perspective. A kilowatt-hour has a joule value of 3,600,000. Hence, the energy contained in a liter of gasoline is 8.76 kW/hr,

Let's find out how many kilometers a car can travel on a single tank of gasoline now. The distance driven here is 145 kilometers of distance in 10 litres. So, in 10 litres = 145 km distance covered. That is, in one litre of petrol a car travels a total distance of 14.5 km.

To know more about energy visit:-

brainly.com/question/1932868

#SPJ9

If the position is 2 m, 30 degrees above the horizontal and to the south, and the force is 3 n, horizontal (neither up nor down) and to the west, then The magnitude of the torque in this scenario is 6 Nm.

The magnitude of the torque in this scenario is determined by calculating the cross product of the position vector and the force vector.

The position vector is given by r = 2m (30° south of the horizontal) and the force vector is given by F = 3N (west).

To calculate the cross product of these two vectors, we can use the formula:

Torque = r x F = |r||F| sin&theta,

where &theta is the angle between the vectors.

In this scenario, the angle between the position vector and the force vector is 90°.

Therefore, the magnitude of the torque can be calculated as follows:

Torque = |r||F|sin90° = (2m)(3N)(1) = 6 Nm.

for such more question on magnitude

https://brainly.com/question/24256733

#SPJ11

Heat transfer between a person and the environment occurs through the processes of convection, conduction, and radiation. The rate of heat transfer depends on factors such as the temperature difference between the person.

Conduction is a process of heat transfer that occurs through a material or between two materials that are in direct contact with each other. In this process, heat flows from a region of higher temperature to a region of lower temperature through molecular collisions. The heat energy is transferred through the material or the contact surface by means of the vibration and movement of the molecules.

Conduction is responsible for heat transfer in solids, such as metals, ceramics, and polymers, and it can also occur between different solids in contact with each other. The rate of conduction depends on several factors, including the thermal conductivity of the material, the temperature difference between the two regions, the thickness of the material, and the surface area of contact.

To know more about Conduction visit :

https://brainly.com/question/12136944

#SPJ1

The component vr of velocity vector v along the radial direction from the radar gun to the car is the component of the velocity that is in the direction of the radial line that connects the radar gun to the car.

It can be calculated by taking the dot product of the velocity vector and the unit vector of the radial line.

The unit vector of the radial line is a vector that has a magnitude of one and that is pointing in the direction of the radial line.

The dot product of two vectors is equal to the magnitude of the first vector multiplied by the projection of the second vector on the first vector.

Thus, the component of velocity vr along the radial line is calculated by taking the magnitude of v multiplied by the projection of the unit vector of the radial line on v.

The component vr can be used to determine the speed of the car from the radar gun. The speed of the car is equal to the magnitude of vr divided by the speed of light.

By knowing the speed of the car, the speed limit can be compared to it in order to determine if the car is driving at a legal speed.

to know more about vector refer here:

https://brainly.com/question/24256726#

#SPJ11

The magnitude of the induced emf by the coil is  -0.63 V.

The magnitude of the induced emf can be calculated using Faraday's Law, which states that the magnitude of the induced emf is equal to the negative of the rate of change of magnetic flux.

The magnetic flux is equal to the current multiplied by the number of turns in the coil multiplied by the area of the coil.

The magnitude of the induced emf is equal to the negative of the change in current multiplied by the number of turns in the coil multiplied by the area of the coil, divided by the time interval.

The magnitude of the induced emf is equal to the negative of (22.0 A - 12.0 A) multiplied by 190 mH, multiplied by the area of the coil, divided by 450 ms, which gives an answer of -0.63 V.

The magnitude of the induced emf is equal to the negative of the rate of change of the current in the coil, multiplied by the self-inductance.

Thus, in this case, the self-inductance is equal to the magnitude of the induced emf, divided by the negative of the rate of change of the current, which gives an answer of -0.63 V.

to know more about induced emf refer here

https://brainly.com/question/16764848#

#SPJ11

The possible direction in which an electromagnetic wave is traveling if the electric field is oscillating along the z-axis and the magnetic field is oscillating along the x-axis is the y-axis.

An electromagnetic wave is composed of two mutually perpendicular fields that oscillate perpendicular to the direction of the wave's propagation. They are the electric field and the magnetic field. An electromagnetic wave is created when a charged particle is accelerated. These waves can travel through a vacuum or any medium, including air and water, at the speed of light.

In this scenario, the electric field of the wave oscillates along the z-axis, while the magnetic field oscillates along the x-axis. As a result, the wave's propagation direction must be perpendicular to both fields. As a result, the wave must be propagating along the y-axis.This is why it's critical to comprehend the interplay between electric and magnetic fields in the context of electromagnetic waves.

It's also critical to recognize that an electromagnetic wave's direction of propagation is always perpendicular to the oscillation directions of the two fields, which are mutually perpendicular to each other.

for such more question on electromagnetic wave

https://brainly.com/question/24319848

#SPJ11

For a rocket launched southward from Boulder, the Coriolis effect would cause it to drift to the east, leading to a curved flight path rather than a straight one.

The Coriolis effect is an important force to consider when launching a research rocket from Boulder. The Coriolis effect is the result of Earth's rotation and will cause any object moving along the surface of the Earth to veer to the right in the Northern hemisphere and to the left in the Southern hemisphere.

This effect is most noticeable for objects traveling long distances, such as a rocket. As it continues to fly south, the Coriolis force will continue to act upon it, increasing the curvature of its path. The magnitude of the Coriolis force depends on the speed of the object and its distance from the poles. Therefore, the more time the rocket has to travel, the more it will be deflected from its intended path.

The Coriolis effect is an important factor to consider for any research rocket launch. It has the potential to affect the accuracy and success of the mission and must be taken into account when planning a launch trajectory.

For more such questions on Coriolis effect.

https://brainly.com/question/14290551#

#SPJ11

Complete Question:

A research rocket is launched from Boulder straight towards the south. How would the Coriolis effect change the path of the rocket?

The star might be quite large in size, with a much larger surface area than the sun. This would increase its luminosity despite its cooler temperature.

The star has a high luminosity (100,000 x the sun's) and a cool temperature (3500 K) because of its size.

A star's luminosity is proportional to its size, so if a star is very large, it can have a high luminosity even if it is relatively cool.

Another possibility is that the star is in a phase of its life cycle where it has expanded and cooled, such as a red giant or supergiant, but still retains a high luminosity due to its large size.

These stars have relatively low surface temperatures, but their large sizes give them very high luminosities.

Therefore, this star is likely very large and thus has a very high luminosity despite its low temperature.

Learn more about Luminosity and temperature here:

brainly.com/question/31014896

#SPJ11

An electron and a proton are placed at rest in a uniform electric field of magnitude 498 N/C. The speed of electron and proton 44.4 ns after being released is -3.87 × 10⁶ m/s and 2.13 × 10³ m/s respectively.

Given data:

Electric field (E) = 498 N/C,

Time (t) = 44.4 ns = 44.4 × 10⁻⁹ s,

Mass of electron (m₁) = 9.11 × 10⁻³¹ kg,

Mass of proton (m₂) = 1.67 × 10⁻²⁷ kg.

Formula:

The acceleration produced in the electric field is given by a = qE/m, where q is the charge of the particle, E is the electric field strength, and m is the mass of the particle.

From the above formula, we can find the acceleration produced by the electric field on the electron and proton as follows:

For electron (q = -e, where e is the charge of an electron)

a₁ = qE/m₁ = -eE/m₁

= -1.6 × 10⁻¹⁹ × 498/9.11 × 10⁻³¹

= -8.73 × 10¹⁴ m/s²

For proton (q = +e, where e is the charge of an electron)

a₂ = qE/m₂ = eE/m₂

= 1.6 × 10⁻¹⁹ × 498/1.67 × 10⁻²⁷

= 4.80 × 10⁷ m/s²

Using the kinematic equation, v = u + at, where u is the initial velocity, we can find the speed of each particle 44.4 ns after being released as follows:

For electron,

v₁ = u₁ + a₁t = 0 + (-8.73 × 10¹⁴) × 44.4 × 10⁻⁹

= -3.87 × 10⁶ m/s

For proton,

v₂ = u₂ + a₂t = 0 + (4.80 × 10⁷) × 44.4 × 10⁻⁹

= 2.13 × 10³ m/s

Thus, the speed of the electron is -3.87 × 10⁶ m/s and the speed of the proton is 2.13 × 10³ m/s.

To know more about electric field, refer here:

https://brainly.com/question/15800304#

#SPJ4

The speed of the proton can be calculated as:v = p/m = (1.08 × 10⁻¹⁸ kg m/s)/(1.67 × 10⁻²⁷ kg) = 6.46 × 10⁸ m/s. So, the speed of the proton at 10 MeV is 6.46 × 10⁸ m/s.

Relationship between energy in joules versus eV. The relationship between energy in joules and electron volts (eV) is defined by the conversion factor 1 eV = 1.6 × 10⁻¹⁹ joules. This factor is used to convert energy measurements from one unit to the other. If a proton has an energy of 10 MeV, we can use this conversion factor to determine its energy in joules.10 MeV = 10 × 10⁶ eV = 1.6 × 10⁻¹⁹ J/eV × 10 × 10⁶ eV = 1.6 × 10⁻¹³ J. Speed of a proton at 10 MeV.

The speed of a proton at 10 MeV can be calculated using the relativistic equation: E² = (mc²)² + (pc)², where E is the energy of the proton, m is its mass, c is the speed of light, and p is the momentum of the proton. Let's assume that the mass of the proton is 1.67 × 10⁻²⁷ kg. Then, the momentum of the proton can be calculated as follows:p = √(E² - (mc²)²)/c = √((10 × 10⁶ eV)² - (1.67 × 10⁻²⁷ kg × (2.998 × 10⁸ m/s)²)²)/2.998 × 10⁸ m/s = 1.08 × 10⁻¹⁸ kg m/s. The speed of the proton can be calculated as:v = p/m = (1.08 × 10⁻¹⁸ kg m/s)/(1.67 × 10⁻²⁷ kg) = 6.46 × 10⁸ m/s. Therefore, the answer is 10 MeV is 6.46 × 10⁸ m/s.

Learn more about proton : https://brainly.com/question/1805828

#SPJ11

Yes, when a light ray enters from water to air, it will bend further from the normal. This phenomenon is known as refraction, and is caused by the difference in speed between light passing through the two different materials. The light ray will slow down when passing through water, so it will bend closer to the normal.

When a light ray enters the air from water, the light ray will refract closer to the normal. This is due to the fact that light travels faster through air than through water, so when the light enters the air, it bends towards the normal. The amount of refraction is determined by the index of refraction of each material. Since the index of refraction of air is lower than the index of refraction of water, the light ray will bend closer to the normal.

To better understand this, imagine a light ray traveling from a denser material (like water) to a less dense material (like air). As the light ray enters the air, the speed of the light increases, causing it to bend closer to the normal. This is due to the law of refraction, which states that the angle of refraction is inversely proportional to the speed of the light ray. In summary, when a light ray enters the air from water, it will refract closer to the normal. This is due to the fact that light travels faster through air than through water, so the light ray bends towards the normal. The amount of refraction is determined by the index of refraction of each material, with the lower index refraction material (air) resulting in the light ray bending closer to the normal.

For more questions related to refraction.

https://brainly.com/question/14760207

#SPJ11

The new volume is approximately 23.16 L when the nitrogen gas is compressed from 748 mmHg to 725 mmHg at constant temperature.

Use the combined gas law to determine the relationship between a gas's pressure, volume, and temperature:

P1V1/T1 = P2V2/T2

where the gas's starting pressure, volume, and temperature are P1, V1, and T1, and its ultimate pressure, volume, and temperature are P2, V2, and T2.

The equation may be made simpler by saying: since the temperature is constant.

P1V1 = P2V2

Substituting the given values, we get:

725 mmHg × V2 = 748 mmHg × 22.5 L

Solving for V2, we get:

V2 = (748 mmHg × 22.5 L) / 725 mmHg

V2 = 23.16 L

A gas law known as the combined gas law connects a gas's pressure (P), volume (V), and temperature (T). It combines Boyle's law, Charles' law, and Gay-law, Lussac's three additional gas laws.

Learn more about Volume here:

https://brainly.com/question/18090062

#SPJ1

To determine the angular acceleration of the 4-kg slender bar released from rest in the position shown, we need to consider two cases:

(a) when the surface is rough and the bar does not slip, and

(b) when the surface is smooth.

(a) Rough surface (no slip):
1. Calculate the torque about the center of mass (CM). In this case, the only force causing the torque is gravity (mg), acting downward at the midpoint of the bar.
2. Calculate the moment of inertia (I) for the bar. Since it's a slender bar, I = (1/12) * mass * length^2.
3. Use Newton's second law for rotation:

Torque = I * angular acceleration (α). Solve for α.

(b) Smooth surface:
1. Calculate the torque about the point of contact (A) with the surface. In this case, the gravitational force (mg) acts downward at the midpoint of the bar and the frictional force (f) acts upward at point A.
2. Calculate the moment of inertia (I) for the bar about point A. Use the parallel axis theorem: I_A = I_CM + mass * distance^2.
3. Use Newton's second law for rotation:

Torque = I_A * angular acceleration (α). Solve for α.

By following these steps, you will be able to determine the angular acceleration of the 4-kg slender bar in both cases, when the surface is rough and when the surface is smooth.

To know more about Newton's Second Law here :

https://brainly.com/question/13447525

#SPJ11

The vertical speed of a segment of a horizontal taut string through which a sinusoidal, transverse wave is propagating depends on both the wave speed and the amplitude of the transverse wave.

The transverse wave and wave speed for vertical speed of a segment also depends on factors like:

        where 'A' is the amplitude of the transverse wave,

        'ω' is the angular frequency of the wave,

         't' is the time, and

        'cos' is the cosine function.

        where 'T' is the tension in the string and

         'u' is the mass per unit length of the string.

So while the wave speed does not directly determine the vertical speed of a segment of the string, it does affect the angular frequency of the wave (which is related to the wave speed) and thus indirectly affects the vertical speed of a segment of the string through the amplitude of the wave.

To learn more about the 'transverse wave':

https://brainly.com/question/2270715

#SPJ11

A wave crest arrives on the shore a median of every 10. zero seconds, so the frequency is 0. one hundred Hz. The average speed of the waves is 1.five m/s.

We are to decide the common pace of the waves.

Using the formula

v = fλ

Where

v is the speed

f is the frequency

and λ is the wavelength

From the given information

f = 0.1 Hz

λ = 15.0 m

∴ Speed of the wave = 0.1 × 15.0

Speed of the wave = 1.5 m/s

Average speed is defined as the total distance traveled by an object divided by the time taken to cover that distance. It is the measure of the average rate at which an object covers a certain distance in a given amount of time. Mathematically, the average speed is expressed as: Average speed = Total distance traveled / Time taken

It is important to note that average speed is not the same as instantaneous speed, which refers to the speed of an object at a particular instant in time. Average speed takes into consideration the entire adventure, while instant velocity only reflects the velocity at a unmarried moment. The unit of measurement for average speed is meters per second (m/s) or kilometers per hour (km/h), depending on the system of measurement used.

To know more about Average speed visit here:

brainly.com/question/12322912

#SPJ4

Answer:

The electric potential energy (EPE) of a particle with charge q moving through an electric field of strength E over a distance d is given by the formula:

EPE = qEd

In this problem, we are given:

EPE = 5.2 x 10^-18 J

E = 80 N/C

d = 12 m

Substituting these values into the formula, we get:

5.2 x 10^-18 J = q(80 N/C)(12 m)

q = 5.2 x 10^-18 J / (80 N/C)(12 m)

q = 6.875 x 10^-21 C

Therefore, the particle charge is 6.875 x 10^-21 Coulombs.

Explanation:

BRAINLIEST PLEASE!

The torque applied to the wrench can be calculated using the formula:

torque = force x distance

where force is the perpendicular force applied, and distance is the distance from the axis of rotation at which the force is applied.

So, torque = 15 N x 0.5 m = 7.5 Nm

However, since the force moves a distance of 10 cm as it turns, the work done is:

work = force x distance moved = 15 N x 0.1 m = 1.5 J

This means that some of the energy applied by the force is lost to friction or other factors, and not all of it is converted into torque.

Learn more about torque at: https://brainly.com/question/17512177

#SPJ11