What would you predict, the solubility of KHT (solid) in pure water compared with the solubility of KHT (solid) in a 0.1 M KCl solution, which one will be higher? Explain your answer.

Chlorine (Cl) is a nonmetal, meaning it has the tendency to gain electrons to achieve the electron configuration of a noble gas. The noble gas electron configuration of the nearest noble gas, argon (Ar), is 1s2 2s2 2p6 3s2 3p6, with a total of 18 electrons.

Chlorine has 7 valence electrons, meaning it needs 1 more electron to achieve a stable noble gas electron configuration. Therefore, chlorine wants to gain 1 electron to achieve a stable noble gas configuration.

In terms of bonding, chlorine can either gain 1 electron to form an anion with a 1- charge or it can share electrons with another atom to form a covalent bond. Chlorine most commonly forms a single covalent bond with another atom, such as hydrogen, to form hydrogen chloride (HCl). In this case, both atoms share electrons to form a stable molecule.

To know more about Chlorine refer here:

https://brainly.com/question/28440406#

#SPJ11

Answer:

The boiling point of water depends on the pressure exerted on its surface. At standard atmospheric pressure, which is about 101.3 kPa, water boils at 100°C (212°F).

However, in this case, the pressure on the surface of water is 30 kPa, which is lower than standard atmospheric pressure. As the pressure decreases, the boiling point of water also decreases.

To determine the boiling point of water at 30 kPa, we can use a steam table or a phase diagram of water. According to a steam table, at 30 kPa, the boiling point of water is approximately 35.3°C (95.5°F).

Therefore, if the pressure on the surface of the water is 30 kPa, the water will boil at approximately 30°C

Compounds are substances that are made up of two or more elements chemically bonded together.Option A: H2O and O2 are both compounds. H2O is water and O2 is oxygen, both of which are made up of two elements.

Option B: H2O, O2, and CH4 are all compounds. H2O is water, O2 is oxygen, and CH4 is methane, all of which are made up of two or more elements.

Option C: H2O and CH4 are both compounds, but O2 is not. H2O is water and CH4 is methane, both of which are made up of two or more elements. O2 is oxygen, which is not a compound since it is made up of a single element.

Option D: O2 and CH4 are both compounds. O2 is oxygen and CH4 is methane, both of which are made up of two or more elements.

To know more about compounds click on below link :

https://brainly.com/question/14117795

#SPJ11

Organic molecules are those that contain carbon and often hydrogen atoms bonded together, and they are the building blocks of life.

Carbon is an element that is essential to life on Earth and is the central atom in organic compounds. It can form covalent bonds with other elements such as hydrogen, oxygen, nitrogen, and sulfur.

Carbon has the unique ability to form long chains of molecules, branched structures, and rings that are essential to the structure and function of organic molecules.

Organic molecules include carbohydrates, lipids, proteins, and nucleic acids. Carbohydrates are sugars and starches that provide energy to living organisms.

Lipids are fats and oils that are important for insulation and energy storage. Proteins are complex molecules that carry out many functions in the body, such as catalyzing chemical reactions and providing structure to cells.

Nucleic acids are DNA and RNA, which carry genetic information and are essential for the synthesis of proteins.

Oxygen is another element that is essential to life on Earth. It is often found in organic molecules, especially in carbohydrates and lipids.

Oxygen is important for respiration, the process by which living organisms use energy stored in organic molecules to carry out cellular processes.

In respiration, oxygen reacts with organic molecules such as glucose to produce carbon dioxide, water, and energy in the form of ATP.

Organic molecules contain carbon and often hydrogen atoms bonded together, and they are the building blocks of life.

Carbon has the unique ability to form long chains of molecules, branched structures, and rings that are essential to the structure and function of organic molecules.

Oxygen is another element that is often found in organic molecules and is important for respiration.

to know more about organic molecules refer here:

https://brainly.com/question/10504103#

#SPJ11

It helps explain why there are 4 equivalent C-H bonds in CH4,It allows for a better representation of the arrangement of electrons in the molecule, and It helps explain why the dipole moment of the molecule is zero.

Hybridization is the process of combining two or more distinct entities to create a new, unique entity that has a combination of the characteristics of the original entities. It can be used to describe a wide range of phenomena, ranging from the breeding of plants and animals to the intermixing of different cultures.

In biology, hybridization is the process of combining the genetic material of two different species to create a hybrid organism.

Learn more about hybridization here:

https://brainly.com/question/22765530

#SPJ1

The city of Pripyat, Ukraine, located approximately 2.5 miles away from the Chernobyl Nuclear Power Plant, was completely evacuated following the nuclear disaster of April 26th, 1986.

This city, which was home to nearly 50,000 residents at the time, remains a ghost town today. The Chernobyl Nuclear Power Plant was in the process of conducting a safety test at the time of the disaster, which involved shutting down the reactor and ensuring its safety systems were working. Unfortunately, a flaw in the reactor caused a chain reaction and led to a large amount of radiation being released into the environment.

The fallout from the disaster was massive, and the nearby city of Pripyat was severely affected. In response, the Ukrainian government ordered the entire city to be evacuated immediately. Over the course of three days, 50,000 residents were relocated to safer areas, leaving the city a ghost town. Today, Pripyat is still considered uninhabitable and is a popular tourist attraction. Tourists can explore the deserted city and observe the effects of the disaster firsthand.

To know more about nuclear power plant click on below link :

https://brainly.com/question/4246037#

#SPJ11

Answer: A popular classroom demonstration involves placing a paper cup with water in it on a burner and boiling the water in the cup. Although part of the cup may burn, the part containing the water does not. This is because of the phenomenon of surface tension.

Surface tension is the force that causes the molecules at the surface of a liquid to be attracted to one another, creating a film of molecules across the surface of the liquid. This causes the water molecules to stick together and form a barrier against the heat of the flame, thus protecting the water from the heat.

The water molecules at the surface of the cup create a protective film, allowing the heat of the flame to be distributed evenly throughout the cup. This prevents the water in the cup from boiling and keeps it from burning.

The surface tension phenomenon can also be seen in other forms of liquids such as soaps and detergents. When these liquids are placed in a container and agitated, the molecules form a protective film over the surface of the liquid and prevent it from evaporating.

Surface tension is a fascinating phenomenon that can be seen in everyday life, and it can be used to explain why the paper cup does not burn when placed on a burner.

Learn more about Surface tension here:
https://brainly.com/question/11348644#

#SPJ11

The number of moles of OH- in 55.85 mL of 0.350 M NaOH is 0.01976 moles.

This can be calculated using the following equation:
the number of moles of OH- in 55.85 mL of 0.350 M NaOH is 0.01976 moles with 3 significant figures.
To determine the number of moles of OH⁻ present in 55.85 mL of 0.350 M NaOH, we use the formula;

Molarity = Moles of solute ÷ Volume of solution in L

It can be simplified to:

Molarity = Moles of solute ÷ (Volume of solution in mL ÷ 1000)Moles of solute = Molarity × (Volume of solution in mL ÷ 1000)

Thus, the number of moles of OH⁻ present in 55.85 mL of 0.350 M NaOH is given by;

Moles of OH⁻ = 0.350 M × (55.85 mL ÷ 1000) = 0.0196 moles

Therefore, there are 0.0196 moles of OH⁻ present in 55.85 mL of 0.350 M NaOH.

For more such questions on moles , Visit:

https://brainly.com/question/29367909

#SPJ11

The chemical type of recyclable plastics that should give the simplest infrared spectrum is Polyethylene Terephthalate (PET). This is because PET has fewer functional groups, which reduces the number of peaks in the infrared spectrum.

Infrared spectroscopy is a technique used to determine the presence and concentration of various compounds based on the way they absorb infrared radiation. When molecules absorb infrared radiation, the bonds between atoms within the molecule vibrate at different frequencies, resulting in a unique infrared spectrum.

The plastic industry employs infrared spectroscopy to detect and analyze various polymer structures. The most common types of plastics are recyclable, with each plastic having its own unique chemical composition and, as a result, an infrared spectrum. Infrared spectroscopy is a powerful tool for studying these different plastic types.

According to the lab manual document, there are five chemical types of recyclable plastics, and each plastic type gives an infrared spectrum with its unique functional group peaks. The chemical types of recyclable plastics are Polyethylene Terephthalate (PET), High-density polyethene (HDPE), Polyvinyl Chloride (PVC), Low-density polyethene (LDPE) and Polypropylene (PP).

To know more about Infrared spectroscopy:

https://brainly.com/question/13265448

#SPJ11

4.83 x 10^24 atoms are there in 32.10 g of He.

To determine the number of atoms in 32.10 g of He, we first need to convert the mass to moles using the atomic mass of He, which is 4.003 g/mol.

number of moles of He = 32.10 g / 4.003 g/mol = 8.024 mol He

Next, we use Avogadro's number, which is 6.022 x 10^23 atoms/mol, to calculate the number of atoms in 8.024 mol of He:

8.024 mol He x 6.022 x 10^23 atoms/mol = 4.83 x 10^24 atoms

Therefore, there are approximately 4.83 x 10^24 atoms in 32.10 g of He.

Atoms are the fundamental matter units that comprise everything around us, from the air we breathe to the food we consume. They are made up of three different sorts of particles: protons, neutrons, and electrons.

For more such questions on atoms, click on:

https://brainly.com/question/6258301

#SPJ11

(+61.3) is the specific rotation of pure (s)-carvone if a sample of (r)-carvone of 85% ee has a specific rotation of -52.

A chiral chemical compound's unique rotation is a characteristic in chemistry. It is described as the shift in monochromatic plane-polarized light's orientation, expressed as the product of distance and concentration, as the light passes through a sample of a substance dissolved in solution. Dextrorotary substances are those that spin a plane polarised light beam's polarisation plane clockwise, and they correlate to positive specific rotation values.

[α] = α / (c×l)

[α] =specific rotation

α = observed rotation

c=concentration in g/mL

l =path length in dm

[α] = (-52)/(1×1)

    = -52

(-52) = (0.85)×αr + (0.15)×αs

αs= (-52 - 0.85×αr) / 0.15

[α] = αs

    = (-52 - 0.85αr) / 0.15

(-52) = (0.85)(+112.0) + (0.15)α

α = (+61.3)

To know more about specific rotation, here:

https://brainly.com/question/31610445

#SPJ12

Two elements, sodium (Na) and chlorine (Cl) come together, they form a compound called sodium chloride (NaCl), which is also known as table salt.

Table salt is that it is a chemical ionic compound made up of sodium and chlorine atoms that are bonded together.

Table salt is one of the most common chemical compounds found on earth. It is a white, crystalline substance that is highly soluble in water. It is used in many ways, including cooking, preserving food, and as a seasoning.

Table salt has a number of properties that make it useful in various applications. It is highly reactive with other chemicals, which makes it a good cleaning agent.

It is also highly conductive, which makes it useful in electrochemical applications. Additionally, it is non-toxic, which makes it safe to use in food applications.

Learn more about table salt here:

https://brainly.com/question/5528908

#SPJ11

The percent yield of the reaction is 56.0%.

The percent yield of the reaction between 11.9 g of CHCl3 with excess chlorine to produce 10.0 g of CCl4 can be calculated as follows:

Step 1: Write a balanced chemical equation for the reaction CHCl3 + 3Cl2 → CCl4 + 3HCl

Step 2: Calculate the molar mass of CHCl3M(CHCl3) = 12.01 + 1 + 35.45 × 3 = 119.38 g/mol

Step 3: Determine the number of moles of CHCl3n(CHCl3) = m/M = 11.9/119.38 = 0.1 mol

Step 4: Calculate the theoretical yield of CCl4

The balanced equation shows that one mole of CHCl3 reacts with 3 moles of Cl2 to produce one mole of :

CCl4n(CCl4) = n(CHCl3) × (1 mol CCl4/1 mol CHCl3) × (3 mol Cl2/1 mol CHCl3) × (70.9 g CCl4/1 mol CCl4) = 17.87 g CCl4

Step 5: Calculate the percentage

yield% yield = (actual yield/theoretical yield) × 100%

The actual yield of CCl4 is given as 10.0 g% yield = (10.0/17.87) × 100% = 56.0%

Therefore, the percent yield of the reaction is 56.0%.

Learn more about percent yield here:

https://brainly.com/question/17042787#

#SPJ11

Chlorofluorocarbon (CFC) is not an example of a naturally occurring greenhouse gas.

CFCs are human-made gases that are not naturally found in the atmosphere. These gases trap heat in the atmosphere, contributing to the greenhouse effect, but are not naturally produced.

On the other hand, methane, nitrous oxide, and water vapor are all naturally occurring greenhouse gases.

Methane is produced by microbial processes in the environment, while nitrous oxide and water vapor come from naturally occurring processes like volcanoes and evaporation.

To know more about Chlorofluorocarbon click on below link:

https://brainly.com/question/12061103#

#SPJ11

The concentration of glycine in the given solution is 0.066 M.

Concentration is defined as the amount of solute per unit volume of the solution.

Thus, the formula for calculating the concentration (C) of a solution is:

C = n/V

Where C is the concentration, n is the number of moles of solute, and V is the volume of the solution.

The formula for calculating the number of moles of a solute is given as:

m = n x M

Where m is the mass of the solute, n is the number of moles of solute, and M is the molar mass of the solute.

Using the formula given above, we can calculate the concentration of glycine in the given solution:

C = m/M x V

We know that the mass of glycine is 15.0 g and its molar mass is M(C₂H₅NO₂) = 75.07 g/mol

Substituting the given values, we get:

C = 15.0/75.07 × 0.330L= 0.066 M

Therefore, the concentration of a solution containing 15.0 g of glycine, C₂H₅NO₂, in a total solution volume of 0.330 l is 0.066 M.

To know more about concentration, refer here:

https://brainly.com/question/10725862#

#SPJ4

(a) We would need 7 pies to serve a slice of pie with each cup of hot chocolate.

(b) There would be 6 slices of pie left over.

From item 6, we know that there are 50 cups of hot chocolate to be served.

Since each pie can be cut into 8 slices, we would need to serve 50/8 = 6.25 pies.

Since we cannot serve a fractional pie, we would need to round up to the next whole number of pies, which is 7.

To find out how many slices of pie would be left over, we need to calculate the total number of slices of pie and subtract the number of slices used to serve the hot chocolate.

Total number of slices of pie = 7 pies x 8 slices per pie = 56 slices

Number of slices used to serve the hot chocolate = 50 slices

Therefore, the number of slices of pie left over would be:

56 slices - 50 slices = 6 slices

Learn more about pieces of pie here: https://brainly.com/question/11694372

#SPJ1

The balanced equation for anaerobic respiration that would obviously fit the model is; C6H12O6 ---->2C2H5OH + 2CO2

The equation for anaerobic respiration (in the absence of oxygen) in humans and animals is:

Glucose → Lactic Acid + Energy (ATP)

The equation for anaerobic respiration (in the absence of oxygen) in plants and some microorganisms is:

Glucose → Ethanol + Carbon Dioxide + Energy (ATP).

Hence, we can see that this is way that anaerobic respiration occurs.

Learn more about anaerobic respiration:https://brainly.com/question/12605249

#SPJ1

One molecule of this substance has the molecular formula CH₂ClO, which is methoxychloro. to ascertain how many oxygen atoms there are in 2 molecules of methoxychloro.

To create dioxygen, or oxygen, two oxygen atoms must make a covalent double bond with one another. Typically, oxygen exists as a molecule. It has the name dioxygen.

With an electrical configuration of (2, 6) and an atomic number of 8, oxygen lacks two more electrons to complete an octet. By exchanging two pairs of electrons with another oxygen atom, the oxygen atom becomes stable. A diatomic oxygen molecule is one that contains two oxygen atoms.

To know more about oxygen atoms visit:-

brainly.com/question/14387251

#SPJ1

The number of moles of Helium gas that could occupy the container when the volume is increased to 500 mL is 9.05 mol.

We can use the combined gas law to solve this problem:

(P1 x V1) / (n1 x T1) = (P2 x V2) / (n2 xT2)

where;

We know that the pressure and temperature are constant, so we can simplify the equation to:

V1/n1 = V2/n2

Solving for n2, we get:

n2 = (V2n1) / V1

Plugging in the values, we get:

n2 = (500 mL * 4.00 mol) / 221 mL

n2 = 9.05 mol

Learn more about number of moles here: https://brainly.com/question/13314627

#SPJ1

It is important not to dilute the initial sample before loading it onto the chromatography column because this can negatively impact the separation and resolution of the components in the sample.

Dilution can lead to a decrease in the concentration of the components in the sample, which can result in poor separation and overlap of the peaks. Additionally, dilution can cause loss of the target compound or impurities in the sample due to adsorption onto the walls of the container used for dilution.

By keeping the sample concentrated and loading it directly onto the chromatography column, the chances of obtaining a clear separation and good resolution of the components in the sample are increased

To learn more about chromatography column refer to:

brainly.com/question/30296545

#SPJ4

Answer : When 3.2 moles of iron (III) oxide and 2.3 moles of carbon monoxide react, 2 moles of iron metal are produced.

2 moles of iron metal are produced when 3.2 moles of iron (III) oxide (Fe2O3) and 2.3 moles of carbon monoxide (CO) react. The balanced chemical equation for this reaction is: Fe2O3 + 3CO --> 2Fe + 3CO2.

This reaction is a combustion reaction, meaning it involves the oxidation of iron (III) oxide by the carbon monoxide. Oxygen from the iron oxide is released as carbon dioxide (CO2) and the iron is left in the reduced form, or elemental iron (Fe).

To calculate the moles of iron metal produced, the mole ratio of Fe2O3 to Fe must be determined. From the balanced equation, it can be seen that for every 1 mole of Fe2O3, 2 moles of Fe are produced. Therefore, to calculate the number of moles of Fe, multiply the number of moles of Fe2O3 by 2. In this case, that would be 3.2 moles of Fe2O3 x 2 = 6.4 moles of Fe.

Finally, to get the number of moles of Fe metal produced, subtract the number of moles of Fe2O3 from the number of moles of Fe. In this case, 6.4 moles of Fe - 3.2 moles of Fe2O3 = 2 moles of Fe metal.

Know more about  iron (III) oxide here:

https://brainly.com/question/19392610

#SPJ11

Answer:  A newly discovered amino acid could act as a buffer at pH values within the range of its two ionizable forms, pk1 and pk2.



The newly discovered amino acid can act as a buffer within the pH range between its two ionizable forms. An amino acid contains two functional groups; the amino group (-NH2) and the carboxyl group (-COOH).

These two groups of atoms, being acidic and basic respectively, behave like a weak acid and a weak base. Consequently, the amino acid solution can function as a buffer at the pH value equal to the sum of the two pKa values.

The pKa of the amino group is known as pk1, and the pKa of the carboxyl group is known as pk2. The pKa of an acid is the pH at which half the acid is ionized and half is not. In other words, pKa is a measure of the acidity of an acid. The lower the pKa, the stronger the acid is.

When the pH is equal to the pKa value of the amino acid, the concentration of acid and conjugate base will be the same. When the pH is one unit higher than the pKa value, the proportion of basic form increases by tenfold compared to the acidic form.

When the pH is one unit lower than the pKa value, the concentration of acidic form is tenfold greater than the concentration of basic form.

Therefore, a newly discovered amino acid could act as a buffer at pH values within the range of its two ionizable forms, pk1 and pk2.

The pH range over which buffering is most effective is between pk1 and pk2. The pKa values of an amino acid will determine the range of pH values over which it can act as a buffer.

Learn more about acidic solution here:

https://brainly.com/question/28580519#

#SPJ11

Yes, you have enough sulfur for three trials. This is because 1.9 g of sulfur is equal to 0.09 mol, which is enough to do three trials of 0.030 mol each. Use the molar mass of sulfur, which is 32 g/mol.

Convert the mass of sulfur given to moles.

1.9 g / 32 g/mol = 0.09 mol

The moles by the number of trials you need to do:

0.09 mol x 3 trials = 0.27 mol

The moles back to grams to make sure you have enough sulfur:

0.27 mol x 32 g/mol = 8.64 g

Since the amount of sulfur given is more than the amount you need for the three trials (1.9 g > 8.64 g), you have enough sulfur.

to know more about sulfur refer here:

https://brainly.com/question/1478186#

#SPJ11

The statement, "all atoms can be easily detected by atomic emission, this is advantageous compared with atomic absorption," is false.

Atomic absorption and atomic emission spectroscopy are two commonly employed techniques for the determination of elements present in a sample.

The advantage of atomic emission spectroscopy over atomic absorption spectroscopy, and vice versa, is dependent on the particular sample to be analyzed.

The principle of atomic absorption spectroscopy is that an atom in the gaseous state absorbs ultraviolet or visible radiation to move from the ground state to an excited state.

As a result, the intensity of the transmitted radiation decreases in proportion to the concentration of the absorbing species.

When a sample is analyzed, the sample is vaporized and the amount of absorption is measured at a specific wavelength.

The amount of radiation that is absorbed by the sample is directly proportional to the amount of the analyte present in the sample.

This information can then be used to estimate the analyte's concentration in the original sample.In atomic emission spectroscopy, the sample is excited by a high-energy source, causing the atoms to reach a higher energy state.

The atoms will eventually return to their ground state by releasing the excess energy, which is emitted as light.

The frequency and intensity of the light emitted is used to determine the concentration of the analyte present in the sample. This process is known as atomic emission spectroscopy.

Atomic absorption spectroscopy is superior in cases where the analyte concentration is low or the sample is a complex mixture,

whereas atomic emission spectroscopy is superior when high sensitivity is required or when the sample contains multiple elements.

Thus, it can be concluded that not all atoms can be easily detected by atomic emission, and that both methods have advantages and disadvantages.

to know more about emission refer here:

https://brainly.com/question/20388835#

#SPJ11

The correct numbers and symbol of elements represented by X are: (1). calcium (2). 18 (3) 15

For more information on atomic formula kindly visit to

https://brainly.com/question/29455002

#SPJ1

The principal organic product formed in the reaction of ethylene oxide with sodium cyanide (NaCN) in aqueous ethanol is ethylene cyanohydrin ([tex]C_{2}H_{5}CN[/tex]). The reaction follows this general reaction scheme:

Ethylene oxide + NaCN     →   Ethylene cyanohydrin + NaOH

The principal organic product formed in the reaction of ethylene oxide with sodium cyanide (NaCN) in aqueous ethanol is ethyl nitrile ([tex]C_{2}H_{5}CN[/tex]).

What is Ethyl nitrile?

Ethyl nitrile is an organic compound with the chemical formula [tex]C_{2}H_{5}CN[/tex]. This colorless liquid is a component of some commonly used solvents and in the manufacture of pharmaceuticals, textiles, and insecticides. It is used to generate pesticides, pharmaceuticals, and synthetic rubber during synthesis. The principal organic product formed in the reaction of ethylene oxide with sodium cyanide (NaCN) in aqueous ethanol is ethyl nitrile ([tex]C_{2}H_{5}CN[/tex]).

Mechanism of Reaction: The reaction between ethylene oxide and sodium cyanide in aqueous ethanol is carried out by the Saponification of Cyanide. Saponification refers to the reaction of a base with a fatty acid to create a soap.

The ethylene oxide undergoes nucleophilic attack by the hydroxide ion to produce a salt. The sodium ethylene oxide salt reacts with NaCN to form an intermediate. This intermediate reacts with [tex]H_{2} O[/tex]to form Ethyl nitrile. Ethylene oxide is a toxic, flammable, and colorless gas. It is used as a sterilant for medical equipment and as a fumigant for spices and foods. It has a sweet odor and can cause eye and respiratory irritation, as well as skin burns. The reaction of ethylene oxide with NaCN in aqueous ethanol generates Ethyl nitrile, which is used in a variety of industries.

For more questions related to ethylene cyanohydrin.

https://brainly.com/question/14919939

#SPJ11

The four traditional meteorological seasons, which are based on the annual temperature cycle and the location of the Earth in its orbit around the sun, split the year into four seasons of three months each. The following describes these seasons:

Here are two reasons why meteorological seasons were needed:

Consistency: Based on the annual temperature cycle, meteorological seasons offer a consistent method of dividing the year into four separate times. This makes it simple to compare weather patterns from one year to the next and to monitor long-term weather pattern changes over time.

Ease of communication: By dividing the year into four seasons based on set calendrer months, it is simpler for people to discuss the weather and make appropriate plans for their daily activities. Because January falls within the winter season according to the meteorological calendar, it is simple to know what kind of weather to anticipate when someone states, "I'm going skiing in January."

Learn more about meteorological ,

https://brainly.com/question/14243944

#SPJ4

If two surface water types with the same density but different salinities and temperatures mix, the resulting water will be denser than both the surface water types.

Areas under warm and high salinity surface water with an appreciable depth, the temperature and salinity decreases with depth and internal vertical mixing processes occur despite stability of the water column. Eventually, this phenomenon is caused by the ability of the sea water to lose or gain heat by conduction and loss or gain of salt takes place by diffusion. This causes the density of the moving water to change directions.

Salt water mixes over limited depths and forms homogenous layers.

To know more about surface water here

https://brainly.com/question/25147725

#SPJ4

If the value of ΔG° is equal to 0, then the value of K or Kp is equal to 1 and the system is said to be in equilibrium.

A change in temperature occurs when heat flow increases or decreases the temperature. This changes the chemical equilibrium towards the products or the reactants. This can be identified by examining the reaction and determining whether it is an endothermic reaction or an exothermic reaction.

If the temperature is raised, the equilibrium constant decreases. If the forward reaction has an endothermic nature, the equilibrium constant increases. The equilibrium position also changes when the temperature is changed.

To learn more about equilibrium, refer to the link:

https://brainly.com/question/30807709

#SPJ12

Yes, a solid Cu(OH)2 will form when 0.075 g KOH is dissolved in 1.0 L of 1.0 x 10^-3 M Cu(NO3)2.  0.107 g of solid Cu(OH)2 will form.

First, we need to determine the amount of Cu2+ ions present in the solution:
1.0 x 10^-3 M Cu(NO3)2 means that there are 1.0 x 10^-3 moles of Cu2+ ions per liter of solution.
Next, we can use stoichiometry to determine the amount of OH- ions that will react with the Cu2+ ions to form Cu(OH)2. The balanced chemical equation for this reaction is:
Cu2+ (aq) + 2OH- (aq) → Cu(OH)2 (s)
For every 1 mole of Cu2+ ions, we need 2 moles of OH- ions. Therefore, the total amount of OH- ions needed to react with all of the Cu2+ ions in the solution is:
2 x 1.0 x 10^-3 mol = 2.0 x 10^-3 mol
Now we can use the Ksp of Cu(OH)2 to calculate the concentration of Cu2+ and OH- ions in the solution. The Ksp expression for Cu(OH)2 is:
Ksp = [Cu2+][OH-]^2
Since we know the Ksp value for Cu(OH)2, we can solve for either [Cu2+] or [OH-]. Let's solve for [OH-]:
Ksp = [Cu2+][OH-]^2
4.8 x 10^-20 = (1.0 x 10^-3 M)[OH-]^2
[OH-]^2 = 4.8 x 10^-17
[OH-] = 2.2 x 10^-9 M
Therefore, the concentration of OH- ions in the solution is 2.2 x 10^-9 M. Since we need 2 moles of OH- ions for every mole of Cu2+ ions, we know that the concentration of Cu2+ ions is half of the concentration of OH- ions:
[Cu2+] = 1.1 x 10^-9 M
Finally, we can use the molar mass of Cu(OH)2 to determine the mass of solid that will form:
Molar mass of Cu(OH)2 = 97.56 g/mol
1 mole of Cu(OH)2 is formed for every mole of Cu2+ ions, so the mass of Cu(OH)2 that will form is:
0.0011 mol x 97.56 g/mol = 0.107 g
Therefore, 0.107 g of solid Cu(OH)2 will form when 0.075 g KOH is dissolved in 1.0 L of 1.0 x 10^-3 M Cu(NO3)2.

For more such questions on solid , Visit:

https://brainly.com/question/28631710

#SPJ11