When does sound become damaging to the human ear?

Answers

Answer 1
when someone yells in it

Related Questions

why did united states withdraw from vietnam war

Answers

the Army had a fight in unfamiliar territory but with the combination of disadvantages and a loss of public support what to the United States withdrawing from Vietnam

Explanation:

I hope this helps

If all of the resistors in the circuit were decreased in value by a factor of 1,000, would the current in each resistor simply increase by a factor of 1,000? explain your answer

Answers

In a circuit, if the resistors were decreased by a factor of 1,000, it is true that the current would increase by a factor of 1,000, according to Ohm's Law.

What is Ohm's Law?

It is a law in electricity that posits that the voltage that goes through a conductor is directly proportional to the current.

How does Ohm'slaw explain the change in current?

One formula in Ohm's law is:

Voltage = Current x Resistance

If the resistance were to decrease by a factor of 1,000, the current would have to increase by a factor of 1,000 as well in order to give the same voltage.

Find out more on Ohm's law at https://brainly.com/question/14296509.

Define resistance of a conductor. State the factors on which resistance of a conductor depends.

Name the device which is often used to change the resistance without changing the voltage source in an electric circuit.

Calculate the resistance of 50 m length of wire of cross-sectional area 0.01 square mm and of resistivity 5 ×10 ^-8 ohm m​

Answers

Answer:

1. Resistance is the opposition offered in a path of flow of current by the atoms or molecules of the conductor.

Factors on which resistance of a conductor depends are:

Length [tex]R \propto l[/tex]

Area of cross section [tex]R \propto \dfrac{1}{A}[/tex]

Nature of the material

2. Rheostat is used to change the resistance without changing the voltage source in an electric circuit.

3.

Given :

[tex]\dashrightarrow l = 50 m[/tex]

[tex]\dashrightarrow A = 0.01 {mm}^{2} [/tex]

[tex]\dashrightarrow A = 0.01 \times {10}^{ - 6} \: {m}^{2} [/tex]

[tex]\dashrightarrow \rho = 5 \times {10}^{ - 8} \: \Omega \: m[/tex]

We know that,

[tex] \dashrightarrow R = \rho \dfrac{l}{A}[/tex]

[tex] \dashrightarrow R = 5 \times {10}^{ - 8} \bigg(\dfrac{50}{0.01 \times {10}^{ - 6} } \bigg)[/tex]

[tex] \dashrightarrow { \pink{ \underline{ R = 250 \: \Omega }}}[/tex]

The resistance of a conductor is the opposition to the flow of current and depends on the length and area of the material

What is resistance of a conductor?

Resistance is the opposition to the flow of current by the atoms or molecules of the conductor.

The factors on which resistance of a conductor depends are:

Length of materialcross-sectional area of the materialNature of the material

A Rheostat is the device used to change the resistance without changing the voltage source in an electric circuit.

The resistanceis given as:

R = resistivity × length/ area

Area = 0.01 square mm = 1.0 × 10^-8 square m

R = (50 × 5 ×10 ^-8 ohm m)/1.0 × 10^-8 square m

Resistance = 250 ohm

Therefore, resistance of a conductor is the opposition to the flow of current.

Learn more about resistance at: https://brainly.com/question/25997303

#SPJ5

Martha wants to calculate an object's velocity. What will she need to do?​

Answers

Answer:

you divide the distance by the time it takes to travel that same distance, then you add your direction to it.

where is A what is the answer?

Answers

A is nowhere to be found

Which statement correctly describes the relationship between frequency and wavelength?

A :As the frequency of a wave increases, the longer its wavelength is

B: As the frequency of a wave increases, the shorter its wavelength is.

C: As the frequency of a wave increases, its wavelength remains the same.

Answers

Answer:

Answer:

Option B

Explanation:

Option B talks about how the frequency of the wave increases the shorter it's wavelengths

Answer:

b

Explanation

B: As the frequency of a wave increases, the shorter its wavelength is.

The top speed of a car is determined by several factors including:

*Power of the motor
*Weight of the car
*Aerodynamics of the car
*Grip of the tires on the road

1) How would you go about determining which of these has the strongest effect?

Helppp!!

Answers

Answer:

Power of the motor.

Explanation:

If it didn't have grip, it would still move. If it was barely aerodynamic (pretty sure nothing can be not aerodynamic at all) it would still move. If it weighed more that the sun (and you had a strong enough motor) it would still move but without a motor, it won't move. Therefore, the motor is the most effective.

How many electrons will it take to give a hot wired fence a charge of 3.5 X 10^6 C?

Answers

Answer:

Q = N e     where N e is the number of electrons required to produce charge Q

N = Q / e = 3.5E6 C / 1.6E-19C = 2.2E25   = 2.2 X 10^25    electrons

Answer:

3.5 million C

Explanation:

Suppose that it takes a simple pendulum 1.2 seconds to swing from its leftmost point to its rightmost point. what is the period of the pendulum

Answers

The time period of the simple pendulum is 2.4 seconds.

Given the data in the question;

Time taken to swing from leftmost point to rightmost point; [tex]t = 1.2s[/tex]Period of the pendulum; [tex]T = \ ?[/tex]

What is Period?

Period is the time needed for a complete cycle of vibration to pass a given point.

Period of a pendulum is the of time needed for it to complete one full back-and-forth motion. It is the time required to for the pendulum to swing from leftmost point to rightmost point and back to leftmost point.

Now, if it took the pendulum [tex]1.2s[/tex] to swing from leftmost point to rightmost point, it will also take the pendulum [tex]1.2s[/tex] to swing back to its original position( leftmost point )

Hence,

[tex]T[/tex] = time taken to swing from leftmost to rightmost + time taken to swing from rightmost point to leftmost point.

[tex]T = 1.2s + 1.2s\\\\T = 2.4s[/tex]

Therefore, the time period of the simple pendulum is 2.4 seconds.

Learn more about Time Period: https://brainly.com/question/27135322

Hello people ~
what's the value of acceleration due to gravity on earth?​

Answers

Answer:

9.8 m/s2

Its value is 9.8 m/s2 on Earth. That is to say, the acceleration of gravity on the surface of the earth at sea level is 9.8 m/s2. When discussing the acceleration of gravity, it was mentioned that the value of g is dependent upon location.

Two cities in the same climate zone must have the same climate and weather conditions. Why is this statement true or false?

A. It is false because cities in the same climate zone must have different climates.
B. It is false because the two cities might differ in their proximity to water.
C. It is true because the two cities are at the same latitude.
D. It is true because the two cities will be closer to the equator.

Answers

Answer:

C

Explanation:

true because c is the best answer

Answer: The answer is C. It is true because the two cities are at the same latitude.

Explanation:

Hi I was doing the same test are u in flvs lol I am too if you are!

If you travel for three hours at a speed of 30 km/h, how far will you go?

Answers

Distance = (speed) x (time)  <== This is important.  You should memorize it.

Distance = (30 km/hr) x (3 hr)

Distance = (30 x 3) (km/hr x hr)

Distance = 90 km

What is one time constant of a 4. 7 μf capacitor in series with a 22 kω resistor?

Answers

Hi there!

We can solve for the time constant using the following:
[tex]\tau = RC[/tex]

τ = Time Constant (s)
R = Resistance (Ω)
C = Capacitance (F)

Simply plug in the values. Remember that:
4.7 μF = 4.7 * 10⁻ ⁶ F = 0.0000047 F

22kΩ = 22 * 10³ Ω= 22000Ω

Solve:
[tex]\tau = 0.0000047 * 22000 = \boxed{0.1034 s}[/tex]

Different Betweens in Current Source And Voltage Source.
[tex] \\ \\ \\ \\ \\ \\ \\ [/tex]
Thanks:')​

Answers

Answer:

Voltage and current sources are two different sorts of sources that may be found in an electrical network. A voltage source has an emf forcing function, whereas a current source has a current forcing function.

☆ ------ ☆ ------ ☆ ------ ☆ ------ ☆

Mass m1 on the frictionless table of the figure is connected by a string through a hole in the table to a hanging mass m2

Answers

For a mass m1 on the frictionless table, the speed m1 must rotate a with radius r if m2 is to remain hanging at rest is mathematically given as

[tex]v=\sqrt{m1/m2*xg}[/tex]

What speed must m1 rotate in a circle of radius r if m2 is to remain hanging at rest?

Generally, the equation for the Force  is mathematically given as

Fc=Fw

Therefore

[tex]\frac{m1v1}{x}=m2g[/tex]

[tex]v=\sqrt{m1/m2*xg}[/tex]

In conclusion,  if m2 is to remain hanging at rest the speed of ratio of m1 is calcuylated using

[tex]v=\sqrt{m1/m2*xg}[/tex]

Read more about Speed

https://brainly.com/question/4931057

The value of the velocity for the mass m₁ on the frictionless table will be [tex]\rm v = \sqrt{\frac{m_1}{m_2 xg} }[/tex]. Velocity is a time-based component. Its unit is m/sec.

What is velocity?

The change of distance with respect to time is defined as speed. Speed is a scalar quantity.

The given data in the problem is

m is the mass

g is the acceleration of free fall =10m/sec²

v is the velocity

From the balancing equation of force the centripetal force is equal to the weight;

[tex]\rm F_c= m_2 g \\\\ \rm \frac{m_1v_1^2}{x} = m_2 g \\\\ v= \sqrt{\frac{m_1}{m_2xg} } \\\\[/tex]

Hence the value of the velocity for the mass m₁ on the frictionless table will be [tex]\rm v = \sqrt{\frac{m_1}{m_2 xg} }[/tex].

To learn more about the velocity refer to the link;

https://brainly.com/question/862972

#SPJ4

If a fast-moving car making a loud noise approaches and moves past a person, which of the following will happen as the distance between the two increases?

A) The pitch and frequency of the sound waves reaching the person's ear will remain unchanged.

B) The pitch of the sound being heard by the person will appear to be lower than the pitch of the source.

C) The frequency of the sound waves reaching the person's ear will be greater than the frequency of the waves leaving the car.

D) The pitch of the sound being heard by the person will appear to be higher than the pitch of the source.

Answers

Answer:

(B) Probably - Pitch will appear to be lower than the source

Pitch differences occur because of relative motions between the source and observer - it does not depend on distance measurements

Answer:

(B) Probably - Pitch will appear to be lower than the source

Pitch differences occur because of relative motions between the source and observer - it does not depend on distance measurements

Explanation:

A car is traveling in a race. The car went from the initial velocity of 35 m/s to the final velocity of 65 m/s in 5 seconds
What is the acceleration?
- 13 m/s
-6m/s
6 m/s
13 m/s

Answers

Answer:

C

Explanation:

65-35 = 30

30 divided by 5 = 6

The answer will be 6 m/s

Explanation:

c............ ......

...

30. (a) What is the effect on the period of a pendulum if you double its length?
(b) What is the effect on the period of a pendulum if you decrease its length by 5.00%?

The answers are "(a) Period increases by a factor of 1.41 (2–√)(b) Period decreases to 97.5% of old period" but please include all of your work.

Answers

Let's know the formula

[tex]\\ \rm\rightarrowtail T=2\pi \sqrt{\dfrac{l}{g}}[/tex]

So

[tex]\\ \rm\rightarrowtail T\propto \sqrt{l}[/tex]

Hence if length is doubled time period will be √2 times

√2=1.41 (Approximately)

#2

Decrease by 5% will decrease the time period 5/2=2.5%

So

It's

100-2.5=97.5% of old period

What increases the transfer of the wind's energy to the water?


Question 4 options:

A. flat water


B. large waves


C. large rocks

PLEAS HELP ME FAST

Answers

Answer:

A, flat water

Explanation:

100 Points!!!
1.) What does the image of an object look like through a convex lens when the object is further from the lens than the focal point?


A. It looks the same as the actual object.

B. It is right side up and larger than the object.

C. It is upside down and larger than the object.

D. It is upside down and smaller than the object.


2.) What happens when light rays reflect?


A. They are partially absorbed.

B. They bounce back.

C. They are all absorbed

D. They pass through an object.


3.) Based on how it refracts light, what would you expect images formed by a concave lens to look like?


A. Smaller

B. The same as the objects that they are images of

C. Magnified

D. Reversed


4.) What happens to light rays when they enter a different medium?


A. They reflect

B. They Bend

C. They Curve

D. They Stop

Answers

(1) The image of an object placed further from the lens than the focal point will be upside down and smaller than the object.

(2) When light rays reflect, they bounce back.

(3)  Images formed by a concave lens will look magnified.

(4) When light rays enter a different medium, they bend.

1.0 Object placed further from the lens than the focal point

The image of an object placed further from the lens than the focal point will be diminished and inverted.

Thus, the correct answer will be "upside down and smaller than the object".

2.0 What is reflection of light?

The ability of light to bounce back when it strike a hard surface is known as refection.

3.0 Image formed by concave lens

A concave lens is diverging lens is usually virtual, erect and magnified.

4.0 Refraction of light

The change in speed of light when it travels from medium to another medium is known as refraction. Refraction is also, the ability of light to bend around obstacles.

Learn more about reflection and refraction of light here: https://brainly.com/question/1191238

Answer:

It is upside down and larger than the object

They bounce back

Magnified

They bend

Explanation:

Imagine a situation : If people could not see colours, then how would traffic lights work ? Design a traffic system that does not rely on colors.​

Answers

Answer:

position

Explanation:

Okay, so this already exists

Colorblind people use the position of the light

Red on top, yellow in middle, green on bottom

A 1500kg car moving at a speed of 20.1m/s comes toa stop after travelling a distance of 200m. What was the average force exerted by the breaks on the car?​

Answers

Answer:

= -1515N

Explanation:

v^2=u^2+2as

0m/s

u=20.1m/s

0=(20.1)^2+(2xax200)

0=404.01+400a

-404.01=400a

-404.01÷400=a

a= -1.01m/s^s

its negative because the force is slowing down the car

Newton's second law of motion

F=ma

=1500×-1.01

F= -1515N

List the elements mentioned from hydrogen to iron in the order of their fusing temperature.

Answers

Explanation:

H

Hydrogen

-259.14 -252.87 0.00008988 (gas, 273K)

2

He

Helium

-272.20 (under pressure) -268.934 0.0001785 (gas, 273K)

3

Li

Lithium

180.54 1347 0.534

4

Be

Beryllium

1278 2970 1.8477

5

B

Boron

2300 3658 2.34

6

C

Carbon

3527 4827

(sublimes) 2.260 (graphite)

3.513 (diamond)

7

N

Nitrogen

-209.86 -195.8 0.0012506 (gas, 273K)

8

O

Oxygen

-218.4 -182.96 0.001429 (gas, 273K)

9

F

Fluorine

-219.62 -188.14 0.001696 (gas, 273K)

10

Ne

Neon

-248.67 -246.05 0.00089994 (gas, 273K)

11

Na

Sodium

97.81 882.9 0.971

12

Mg

Magnesium

648.8 1090 1.738

13

Al

Aluminum

660.37 2467 2.698

14

Si

Silicon

1410 2355 2.329

15

P

Phosphorus

44.1 (white)

410 (red, under pressure) 280 (white) 1.82 (white)

16

S

Sulfur

113 (α)

119 (b)

106.8 (g) 444.67 2.070 (α)

1.957 (b)

17

Cl

Chlorine

-100.98 -33.97 0.003214 (gas, 273K)

18

Ar

Argon

-189.37 -185.86 0.001784 (gas, 273K)

19

K

Potassium

63.65 774 0.862

20

Ca

Calcium

839 1484 1.55

21

Sc

Scandium

1541 2831 2.989

22

Ti

Titanium

1660 3287 4.54

23

V

Vanadium

1887 3377 6.11 (292 K)

24

Cr

Chromium

1857 2672 7.19

25

Mn

Manganese

1244 1962 7.44

26

Fe

Iron

1535 2750 7.874

27

Co

Cobalt

1495 2870 8.90

28

Ni

Nickel

1453 2732 8.902 (298 K)

29

Cu

Copper

1083.4 2567 8.96

30

Zn

Zinc

419.58 907 7.133

31

Ga

Gallium

Why does the final electron energy not depend on the focusing cylinder voltage?

Answers

The electron energy does not depend on the focusing cylinder voltage because the magnetic field runs perpendicular to the electron's direction of movement.

What is a magnetic field?

A magnetic field is produced by moving negatively electric charges (electrons) which generate magnetic forces that are observable.

The negative electrons that orbit around atoms in a molecule generate small magnetic fields around such atoms.

According to Fleming's left-hand rule, the direction of a magnetic force acting on a current is perpendicular to the direction of the electric current and magnetic field.

Learn more about Fleming's left-hand rule here:

https://brainly.com/question/20768891

Because it exerts a force that's also parallel to the horizontal fields instead of in opposition to it, the final electron energy is unchanged by the focusing cylinder voltage.

What is electron energy?

An electron's energy is on the same scale (in the same range) as that of light. The lines in an element's spectrum represent changes in the energy of electrons within the element's atoms. Scientists have reached numerous conclusions regarding the behavior of electrons in atoms by studying these spectra.

Negative electrons orbiting around atoms in a molecule produce modest magnetic fields surrounding them.

The vector of a magnetic force that acts on a current is opposite to the axis of the electric current and magnetic fields, as per Fleming's left-hand rule.

Thus, because it exerts a force that's also parallel to the horizontal fields instead of in opposition to it, the final electron energy is unchanged by the focusing cylinder voltage.

Learn more about the electron energy here:
https://brainly.com/question/24373411

#SPJ4

Two horses pull horizontally on ropes attached to a tree stump each horse pulls with a force of F if the angle between the two ropes is 126° what's resultant force?​

Answers

Answer:

126 / 2 = 63 = angle between one rope and the direction of the resultant force

t = F cos 73 = .45 F      force on stump due to one horse

T = 2 t = .90 F       force on stump due to both horses - T would be the resultant of the two horses each pulling with force F

After hearing about an accident on his normal route, mr. gujral checks for alternate routes to get to work. what type of circuit does this traffic situation model? a series circuit because there is more than one path a series circuit because there is only one path a parallel circuit because there is more than one path a parallel circuit because there is only one path

Answers

The type of circuit does this traffic situation model will be a parallel circuit because there is more than one path.

What is a parallel circuit?

A parallel circuit has branches that split the current such that just a portion of it passes through each branch.

The voltage or potential difference between each branch of a parallel circuit is the same, but the currents might differ.

A parallel circuit is having more than one path in order to reach it on time he has to take a different path.

Hence the type of circuit does this traffic situation model will be a parallel circuit because there is more than one path.

To learn more about the parallel circuit refer to the link;

https://brainly.com/question/26589211

Answer:

C) a parallel circuit because there is more than one path

Explanation: edge

Which claim do scientists use to describe electromagnetic radiation?


(1 point)

Electromagnetic radiation exhibits properties of particles only.


Electromagnetic radiation exhibits properties of both particles and waves.


Electromagnetic radiation doesn't exhibit properties of either particles or waves.


Electromagnetic radiation exhibits properties of waves only.

Answers

Answer:c

Explanation: I took the identifying claims quick check and the answers are 1.yes it can be 2. No because it is an opinion 3.claims 4.it is prediction 5.both particles and waves 6.a wave model is most useful

Scientists use to describe electromagnetic radiation as It exhibits properties of both particles and waves. The correct option is B.

What is an electromagnetic wave?

An electromagnetic wave is a type of wave that consists of oscillating electric and magnetic fields that travel through space at the speed of light.

Electromagnetic waves are produced by the movement of charged particles and are characterized by their frequency, wavelength, and amplitude.

Electromagnetic waves include a wide range of frequencies, which together form the electromagnetic spectrum. The spectrum includes radio waves, microwaves, infrared radiation, visible light, ultraviolet radiation, X-rays, and gamma rays. Each of these types of electromagnetic waves has a different frequency and wavelength, which determines its properties and how it interacts with matter.

Here in the question,

Scientists describe electromagnetic radiation as exhibiting properties of both particles and waves.

This is known as the wave-particle duality of electromagnetic radiation, which means that electromagnetic radiation can exhibit both wave-like and particle-like behavior depending on how it is observed or measured.

The wave-like behavior is described by its frequency, wavelength, and amplitude, while the particle-like behavior is described by its energy, momentum, and photons.

Therefore, The electromagnetic wave shows duality i.e both particle and wave properties.

To learn more about The electromagnetic wave click:

https://brainly.com/question/3101711

#SPJ3

A boy of mass 50kg runs a set of steps of total height of 10cm. Calculate the work done (g =10)

Answers

Answer:

Explanation:

w=F×S

F=mg

F =50×110

F=500N

S=0.1 m

W=500×0.1

W=50j

A bicycle wheel of radius 40. 0 cm and angular velocity of 10. 0 rad/s starts accelerating at 80. 0 rad/s2. What is the centripetal acceleration of the wheel at this time point?

Answers

The magnitude of the centripetal acceleration of the bicycle wheel is 40 m/s².

Centripetal acceleration of the wheel

The centripetal acceleration of the bicycle wheel is the inward or radial acceleration of the bicycle on the circular path.

The magnitude of the centripetal acceleration of the bicycle wheel is calculated as follows;

a = ω²r

where;

ω is angular speed

r is the radius of the circular path

a = (10)² x 0.4

a = 40 m/s²

Thus, the magnitude of the centripetal acceleration of the bicycle wheel is 40 m/s².

Learn more about centripetal acceleration  here: https://brainly.com/question/79801

The acceleration of a body travelling in a circular route is known as centripetal acceleration.  The centripetal acceleration of the wheel at this time point is 40 m/sec².

What is centripetal acceleration?

The acceleration of a body travelling in a circular route is known as centripetal acceleration. It is given by the formula,

[tex]a_c = \dfrac{v^2}{r} = \omega^2 r[/tex]

The centripetal acceleration of the wheel with angular velocity 10 rad/sec and velocity 40cm (0.4 m) can be written as,

[tex]a_c = \omega ^2\times r\\\\a_c = (10)^2\times 0.4\\\\a_c = 40\rm\ m/sec^2[/tex]

Hence, the centripetal acceleration of the wheel at this time point is 40 m/sec².

Learn more about Centripetal acceleration:

https://brainly.com/question/14465119

#SPJ4


1. A hockey puck has a mass of 0.115-kg and strikes the pole of the net at (37 m/s)x. It bounces off in the opposite direction at (-25 m/s)x +(5 m/s)y. (A) What is the impulse on the puck? (B) If the collision takes .005s what is the force acted on the puck?

Answers

(a) The impulse on the puck is 1.323 kgm/s.

(b) The magnitude of the force that acted on the puck is 264.5 N.

Impulse of the puck

The impulse on the puck is equal to the change in momentum of the puck.

The change in th momentum of the puck is calculated as follows;

ΔP = m(u - v)

where;

v is the final velocity = (-25x + 5y) m/su is the initial velocity = 37 m/s

Magnitude of the final velocity

|v| = √[(-25)² + (5)²] = 25.5 m/s

ΔP = 0.115(37 - 25.5)

ΔP = 1.323 kgm/s

Thus, the impulse on the puck is 1.323 kgm/s.

Force on the puck

The magnitude of the force that acted on the puck is calculated as follows;

F = ΔP/t

F = 1.323/0.005

F =264.5 N

Learn more about impulse here: https://brainly.com/question/25700778

Other Questions
The broad term psychologists use to describe the manipulation of mental representations of information is 5x+3y-11Whats the answer ?. Apply the distributive property to factor out the greatest common factor.4+10= 3.) What are some key things to look for when setting up an IRA? Quotes about how the english language has evolved over time Add:Help help help help 1350 + 238 How is the sentence "9 less than x is 1" written as an equation? How much energy, in kJ, is released when 27.0 grams of water is cooled from 112C to -15C? What is the area of the following figure?17.6 mm I Dont get this, someone help!! The equation to model Exponential Growth is: y=a(1+r)t y= total amount a= starting amount r= the growth rate as a decimal t= number of growth periods Question 4 A sample of bacteria cells in a petri dish increases by 50% every hour. A scientist starts with a sample of 30 bacteria cells. Write an equation that can be used to determine the number of cells after x hours. explain chemical equilibrium The number 1 is a factor of _________.A) all odd numbersB) all even numbersC) all whole numbers can a person have more than 46 chromosomes? what would be the results if this hapened hello help me with this question thanks in advance What was the connection between the Cold War and McCarthyism? Vocabulary BuilderVisualize It.......Complete the bubble map using the review words.Review WordsfractionVidentity Propertyof Multiplicationmultipleproductunit fractionmultiplication The Great Lakes are experiencing lower water levels and higher water temperatures. This situation shows the impact of which environmental issue? 4:00 pm - 8:00pmIs how many hours? Why would the UStry to hide the CivilRights Movementfrom the eyes ofthe USSR?