The best choice to favor elimination over substitution in a reaction with 2-bromopropane is sodium tert-butoxide. This is because this reagent is a stronger base, allowing for the deprotonation of 2-bromopropane.
The reaction of 2-bromopropane most favors elimination over substitution when reacted with the sodium tert-butoxide favors elimination over substitution in a reaction with 2-bromopropane.
In organic chemistry, substitution reaction occurs when an atom or a group of atoms in a molecule is replaced by another atom or a group of atoms. In contrast, elimination reactions occur when atoms or groups of atoms are removed from a molecule. The most significant difference between the two is that one leaves another behind. This means that if one group is substituted by another, then it results in a completely different compound than before.
In the reaction between 2-bromopropane and sodium tert-butoxide, the sodium tert-butoxide (Na + OC(CH3)3) serves as a strong base. The tert-butoxide ion, as a strong base, abstracts a hydrogen ion from a carbon adjacent to the bromine, leading to the formation of a reactive alkene intermediate.
The elimination of HBr from 2-bromopropane to form propene is made possible by this alkene intermediate. Therefore, the reaction most favors elimination over substitution when reacted with sodium tert-butoxide.
For more such questions on sodium tert-butoxide , Visit:
https://brainly.com/question/29742455
#SPJ11
the complex process whereby silicate minerals such as feldspar are broken down to make clay minerals by reacting with water molecules is .
The complex process whereby silicate minerals such as feldspar are broken down to make clay minerals by reacting with water molecules is known as hydrolysis.
Hydrolysis is the process of breaking down a compound by adding water to it. It is a chemical process in which water reacts with minerals to form new compounds with new structures. The process is a crucial part of the formation of clay minerals. Hydrolysis is a common process in nature and occurs when water reacts with minerals to form new compounds. This reaction occurs in soil, rocks, and other natural materials.
The hydrolysis process breaks down minerals such as feldspar and releases other minerals like aluminum and iron oxides. The hydrolysis of silicate minerals such as feldspar creates clay minerals. This process is responsible for the formation of clay minerals, which are an important component of soil.
Read more about silicate :
https://brainly.com/question/4938885
#SPJ11
all atoms can be easily detected by atomic emission, this is advantageous compared with atomic absorption. group of answer choices true false
The statement, "all atoms can be easily detected by atomic emission, this is advantageous compared with atomic absorption," is false.
Atomic absorption and atomic emission spectroscopy are two commonly employed techniques for the determination of elements present in a sample.
The advantage of atomic emission spectroscopy over atomic absorption spectroscopy, and vice versa, is dependent on the particular sample to be analyzed.
The principle of atomic absorption spectroscopy is that an atom in the gaseous state absorbs ultraviolet or visible radiation to move from the ground state to an excited state.
As a result, the intensity of the transmitted radiation decreases in proportion to the concentration of the absorbing species.
When a sample is analyzed, the sample is vaporized and the amount of absorption is measured at a specific wavelength.
The amount of radiation that is absorbed by the sample is directly proportional to the amount of the analyte present in the sample.
This information can then be used to estimate the analyte's concentration in the original sample.In atomic emission spectroscopy, the sample is excited by a high-energy source, causing the atoms to reach a higher energy state.
The atoms will eventually return to their ground state by releasing the excess energy, which is emitted as light.
The frequency and intensity of the light emitted is used to determine the concentration of the analyte present in the sample. This process is known as atomic emission spectroscopy.
Atomic absorption spectroscopy is superior in cases where the analyte concentration is low or the sample is a complex mixture,
whereas atomic emission spectroscopy is superior when high sensitivity is required or when the sample contains multiple elements.
Thus, it can be concluded that not all atoms can be easily detected by atomic emission, and that both methods have advantages and disadvantages.
to know more about emission refer here:
https://brainly.com/question/20388835#
#SPJ11
the reaction of 11.9 g of chcl3 with excess chlorine produced 10.0 g of ccl4 what is the percent yield
The percent yield of the reaction is 56.0%.
The percent yield of the reaction between 11.9 g of CHCl3 with excess chlorine to produce 10.0 g of CCl4 can be calculated as follows:
Step 1: Write a balanced chemical equation for the reaction CHCl3 + 3Cl2 → CCl4 + 3HCl
Step 2: Calculate the molar mass of CHCl3M(CHCl3) = 12.01 + 1 + 35.45 × 3 = 119.38 g/mol
Step 3: Determine the number of moles of CHCl3n(CHCl3) = m/M = 11.9/119.38 = 0.1 mol
Step 4: Calculate the theoretical yield of CCl4
The balanced equation shows that one mole of CHCl3 reacts with 3 moles of Cl2 to produce one mole of :
CCl4n(CCl4) = n(CHCl3) × (1 mol CCl4/1 mol CHCl3) × (3 mol Cl2/1 mol CHCl3) × (70.9 g CCl4/1 mol CCl4) = 17.87 g CCl4
Step 5: Calculate the percentage
yield% yield = (actual yield/theoretical yield) × 100%
The actual yield of CCl4 is given as 10.0 g% yield = (10.0/17.87) × 100% = 56.0%
Therefore, the percent yield of the reaction is 56.0%.
Learn more about percent yield here:
https://brainly.com/question/17042787#
#SPJ11
g n what range of ph values a newly discovered amino acid could act as a buffer? this amino acid has pk1
Answer: A newly discovered amino acid could act as a buffer at pH values within the range of its two ionizable forms, pk1 and pk2.
The newly discovered amino acid can act as a buffer within the pH range between its two ionizable forms. An amino acid contains two functional groups; the amino group (-NH2) and the carboxyl group (-COOH).
These two groups of atoms, being acidic and basic respectively, behave like a weak acid and a weak base. Consequently, the amino acid solution can function as a buffer at the pH value equal to the sum of the two pKa values.
The pKa of the amino group is known as pk1, and the pKa of the carboxyl group is known as pk2. The pKa of an acid is the pH at which half the acid is ionized and half is not. In other words, pKa is a measure of the acidity of an acid. The lower the pKa, the stronger the acid is.
When the pH is equal to the pKa value of the amino acid, the concentration of acid and conjugate base will be the same. When the pH is one unit higher than the pKa value, the proportion of basic form increases by tenfold compared to the acidic form.
When the pH is one unit lower than the pKa value, the concentration of acidic form is tenfold greater than the concentration of basic form.
Therefore, a newly discovered amino acid could act as a buffer at pH values within the range of its two ionizable forms, pk1 and pk2.
The pH range over which buffering is most effective is between pk1 and pk2. The pKa values of an amino acid will determine the range of pH values over which it can act as a buffer.
Learn more about acidic solution here:
https://brainly.com/question/28580519#
#SPJ11
how many moles of iron metal are produced when 3.2 mol iron (iii) oxide and 2.3 mol carbon monoxide react? fe2o3 3co -------> 2fe 3co2 step by step
Answer : When 3.2 moles of iron (III) oxide and 2.3 moles of carbon monoxide react, 2 moles of iron metal are produced.
2 moles of iron metal are produced when 3.2 moles of iron (III) oxide (Fe2O3) and 2.3 moles of carbon monoxide (CO) react. The balanced chemical equation for this reaction is: Fe2O3 + 3CO --> 2Fe + 3CO2.
This reaction is a combustion reaction, meaning it involves the oxidation of iron (III) oxide by the carbon monoxide. Oxygen from the iron oxide is released as carbon dioxide (CO2) and the iron is left in the reduced form, or elemental iron (Fe).
To calculate the moles of iron metal produced, the mole ratio of Fe2O3 to Fe must be determined. From the balanced equation, it can be seen that for every 1 mole of Fe2O3, 2 moles of Fe are produced. Therefore, to calculate the number of moles of Fe, multiply the number of moles of Fe2O3 by 2. In this case, that would be 3.2 moles of Fe2O3 x 2 = 6.4 moles of Fe.
Finally, to get the number of moles of Fe metal produced, subtract the number of moles of Fe2O3 from the number of moles of Fe. In this case, 6.4 moles of Fe - 3.2 moles of Fe2O3 = 2 moles of Fe metal.
Know more about iron (III) oxide here:
https://brainly.com/question/19392610
#SPJ11
Give two reasons why meteorological seasons were needed?
The four traditional meteorological seasons, which are based on the annual temperature cycle and the location of the Earth in its orbit around the sun, split the year into four seasons of three months each. The following describes these seasons:
Spring: March, April, MaySummer: June, July, AugustFall (or Autumn): September, October, NovemberWinter: December, January, FebruaryHere are two reasons why meteorological seasons were needed:
Consistency: Based on the annual temperature cycle, meteorological seasons offer a consistent method of dividing the year into four separate times. This makes it simple to compare weather patterns from one year to the next and to monitor long-term weather pattern changes over time.
Ease of communication: By dividing the year into four seasons based on set calendrer months, it is simpler for people to discuss the weather and make appropriate plans for their daily activities. Because January falls within the winter season according to the meteorological calendar, it is simple to know what kind of weather to anticipate when someone states, "I'm going skiing in January."
Learn more about meteorological ,
https://brainly.com/question/14243944
#SPJ4
if two surface water types with the same density but different salinities and temperatures mix, the resulting water will be .
If two surface water types with the same density but different salinities and temperatures mix, the resulting water will be denser than both the surface water types.
Areas under warm and high salinity surface water with an appreciable depth, the temperature and salinity decreases with depth and internal vertical mixing processes occur despite stability of the water column. Eventually, this phenomenon is caused by the ability of the sea water to lose or gain heat by conduction and loss or gain of salt takes place by diffusion. This causes the density of the moving water to change directions.
Salt water mixes over limited depths and forms homogenous layers.
To know more about surface water here
https://brainly.com/question/25147725
#SPJ4
A sample of glucose reacts in anaerobic respiration. The right-hand box below shows a particle diagram of the moles of substances present after the reaction is complete.
On a piece of paper draw the "Before" box as shown and draw a particle diagram of the reactant molecules that produced the mixture shown on the right.
The balanced equation for anaerobic respiration that would obviously fit the model is; C6H12O6 ---->2C2H5OH + 2CO2
What is the equation of anaerobic respiration?The equation for anaerobic respiration (in the absence of oxygen) in humans and animals is:
Glucose → Lactic Acid + Energy (ATP)
The equation for anaerobic respiration (in the absence of oxygen) in plants and some microorganisms is:
Glucose → Ethanol + Carbon Dioxide + Energy (ATP).
Hence, we can see that this is way that anaerobic respiration occurs.
Learn more about anaerobic respiration:https://brainly.com/question/12605249
#SPJ1
what are the physical processes by which atoms rearrange during phase transformations in the solid state
Diffusion, nucleation, and crystal growth are the physical processes by which atoms rearrange during phase transformations in the solid state.
Phase transformations in the solid state refer to a type of reaction that happens to the solid state of matter, which results in different properties of the substance.
It is important to note that the process of phase transformation happens through different physical processes that include evaporation, melting, sublimation, and condensation, among others.
During phase transformation in the solid state, atoms undergo a rearrangement process that changes the physical properties of the solid into a different phase. This process usually happens in a few ways, such as:
- Diffusion: This is the movement of atoms from one place to another due to the application of heat or pressure, which allows the atoms to shift positions within the solid. The diffusion process enables the atoms to break and form new bonds, resulting in phase transformation.
- Nucleation: This is a process that happens when the solid phase undergoes a change, which causes the formation of new atoms or molecules. This process typically occurs in areas where there is a higher concentration of atoms, and it takes place due to the application of heat or pressure.
- Crystal Growth: This is a process that happens when the atoms of a solid phase come together to form a new crystal structure. The crystal structure has a different arrangement of atoms, which results in different physical properties.
These processes change the physical properties of the solid into a different phase, resulting in different properties.
To learn more about phase transition refer: https://brainly.com/question/1115925
#SPJ11
what is the ph of a 0.138m solution of h3po4 (assume complete dissociation for the sake of the example)?
Answer: The pH of a 0.138 M solution of H3PO4 (assuming complete dissociation for the sake of the example) is 1.49.
The following steps can be used to determine the pH of the solution.
Phosphoric acid is a triprotic acid, which means that it can donate three hydrogen ions (H+) to a solution. Phosphoric acid's first dissociation reaction is as follows:
H3PO4(aq) → H+(aq) + H2PO4-(aq) This means that in water, H3PO4 will donate one hydrogen ion (H+) to the solution, leaving behind the negatively charged H2PO4- ion.
To determine the pH of the solution, we can use the formula:
pH = -log[H+]
First, we need to determine the concentration of H+ ions in the solution, which we can find from the dissociation of H3PO4. H3PO4(aq) → H+(aq) + H2PO4-(aq) Initially, the concentration of H3PO4 is 0.138 M. Since we're assuming complete dissociation for the sake of this example, we can say that 100% of the H3PO4 dissociates into H+ and H2PO4-.
This means that the concentration of H+ in the solution is equal to the initial concentration of H3PO4:0.138 MWe can now substitute this value into the pH formula:
pH = -log[H+]pH = -log[0.138]pH = 1.49
Therefore, the pH of the 0.138 M solution of H3PO4 (assuming complete dissociation for the sake of the example) is 1.49.
Learn more about ph level here:
https://brainly.com/question/1458045#
#SPJ11
a solution contains 15.0 g of glycine, c2h5no2, in a total solution volume of 0.330 l. what is the concentration of glycine in the solution?
The concentration of glycine in the given solution is 0.066 M.
Concentration is defined as the amount of solute per unit volume of the solution.
Thus, the formula for calculating the concentration (C) of a solution is:
C = n/V
Where C is the concentration, n is the number of moles of solute, and V is the volume of the solution.
The formula for calculating the number of moles of a solute is given as:
m = n x M
Where m is the mass of the solute, n is the number of moles of solute, and M is the molar mass of the solute.
Using the formula given above, we can calculate the concentration of glycine in the given solution:
C = m/M x V
We know that the mass of glycine is 15.0 g and its molar mass is M(C₂H₅NO₂) = 75.07 g/mol
Substituting the given values, we get:
C = 15.0/75.07 × 0.330L= 0.066 M
Therefore, the concentration of a solution containing 15.0 g of glycine, C₂H₅NO₂, in a total solution volume of 0.330 l is 0.066 M.
To know more about concentration, refer here:
https://brainly.com/question/10725862#
#SPJ4
which of the following are compounds? question 37 options: a) h2o and o2 b) h2o, o2, and ch4 c) h2o and ch4, but not o2 d) o2 and ch4
Compounds are substances that are made up of two or more elements chemically bonded together.Option A: H2O and O2 are both compounds. H2O is water and O2 is oxygen, both of which are made up of two elements.
Option B: H2O, O2, and CH4 are all compounds. H2O is water, O2 is oxygen, and CH4 is methane, all of which are made up of two or more elements.
Option C: H2O and CH4 are both compounds, but O2 is not. H2O is water and CH4 is methane, both of which are made up of two or more elements. O2 is oxygen, which is not a compound since it is made up of a single element.
Option D: O2 and CH4 are both compounds. O2 is oxygen and CH4 is methane, both of which are made up of two or more elements.
To know more about compounds click on below link :
https://brainly.com/question/14117795
#SPJ11
a popular classroom demonstration involves placing a paper cup with water in it on a burner, and boiling the water in the cup. although part of the cup may burn, the part containing the water does not because
Answer: A popular classroom demonstration involves placing a paper cup with water in it on a burner and boiling the water in the cup. Although part of the cup may burn, the part containing the water does not. This is because of the phenomenon of surface tension.
Surface tension is the force that causes the molecules at the surface of a liquid to be attracted to one another, creating a film of molecules across the surface of the liquid. This causes the water molecules to stick together and form a barrier against the heat of the flame, thus protecting the water from the heat.
The water molecules at the surface of the cup create a protective film, allowing the heat of the flame to be distributed evenly throughout the cup. This prevents the water in the cup from boiling and keeps it from burning.
The surface tension phenomenon can also be seen in other forms of liquids such as soaps and detergents. When these liquids are placed in a container and agitated, the molecules form a protective film over the surface of the liquid and prevent it from evaporating.
Surface tension is a fascinating phenomenon that can be seen in everyday life, and it can be used to explain why the paper cup does not burn when placed on a burner.
Learn more about Surface tension here:
https://brainly.com/question/11348644#
#SPJ11
at what temperature is the system at equilibrium? at what temperature is the system at equilibrium? t>250k t<250k t
If the value of ΔG° is equal to 0, then the value of K or Kp is equal to 1 and the system is said to be in equilibrium.
A change in temperature occurs when heat flow increases or decreases the temperature. This changes the chemical equilibrium towards the products or the reactants. This can be identified by examining the reaction and determining whether it is an endothermic reaction or an exothermic reaction.
If the temperature is raised, the equilibrium constant decreases. If the forward reaction has an endothermic nature, the equilibrium constant increases. The equilibrium position also changes when the temperature is changed.
To learn more about equilibrium, refer to the link:
https://brainly.com/question/30807709
#SPJ12
g fully reacting an aldehyde with an alcohol will produce? a. an acetal b. a primary alcohol c. no reaction d. a carboxylic acid
Fully reacting an aldehyde with an alcohol will produce an acetal.
What is an acetal?
Acetal is a functional group consisting of two ether groups bonded to the same carbon atom. It's also called a 1,1-dialkoxyalkane.
Acetals are generated by the reaction of carbonyl compounds with alcohols under acidic or basic conditions.
Acetals can be used as protecting groups for carbonyls in organic synthesis. The carbonyl group is made less reactive by formation of the acetal, which shields it from further reaction.
Therefore, reaction with nucleophiles such as organolithium reagents or Grignard reagents is prevented.
To know more about aldehyde, refer here:
https://brainly.com/question/30722723#
#SPJ11
which gas is not an example of a naturally occurring greenhouse gas? responses methane methane chlorofluorocarbon chlorofluorocarbon nitrous oxide nitrous oxide water vapor
Chlorofluorocarbon (CFC) is not an example of a naturally occurring greenhouse gas.
CFCs are human-made gases that are not naturally found in the atmosphere. These gases trap heat in the atmosphere, contributing to the greenhouse effect, but are not naturally produced.
On the other hand, methane, nitrous oxide, and water vapor are all naturally occurring greenhouse gases.
Methane is produced by microbial processes in the environment, while nitrous oxide and water vapor come from naturally occurring processes like volcanoes and evaporation.
To know more about Chlorofluorocarbon click on below link:
https://brainly.com/question/12061103#
#SPJ11
a vessel contains a stoichiometric mixture of butane and air. the vessel is at a temperature of 500 k, a pressure of 1 atm, and has a volume of
The final pressure and temperature are 1.131 atm and (0.9786 mol/ 0.8546 mol).
What is a chemical equation with an example?A chemical equation serves as a metaphor for the transformation of reactants into products. Iron sulfide, for instance, is created when iron (Fe) and sulfur (S) mix (FeS). Fe(s) + S(s) = FeS (s) Iron reacts with sulfur, as indicated by the + sign.
For the complete combustion of butane, the following chemical equation is balanced:
2C4H10 + 13O2 → 8CO2 + 10H2O
mass of butane = (number of moles of butane) x (molar mass of butane)
= (number of moles of oxygen) x (molar mass of oxygen)
= (mass of oxygen) / (molar mass of oxygen) x (molar mass of butane)
The mass of oxygen can be calculated from the ideal gas law:
PV = nRT
n = PV / RT
The amount of moles of oxygen can be determined using this equation with P = 1 atm, V = 5 L, and T = 500 K:
n = (1 atm) x (5 L) / [(0.08206 L atm mol⁻¹ K⁻¹) x (500 K)]
= 0.1222 mol
The mass of butane is:
mass of butane = (0.1222 mol) x (58.12 g/mol)
= 7.11 g
Before the reaction, there were n = 0.1222 mol (butane) + (13/2) x 0.1222 mol moles of gas in the vessel (oxygen)
= 0.8546 mol
The balanced equation:
n = (8/2) x 0.1222 mol (carbon dioxide) + (10/2) x 0.1222 mol (water vapor)
= 0.9786 mol
Solving for P2, we get:
P2 = (n2 / n1) x (T1 / T2) x P1
= (0.9786 mol / 0.8546 mol) x (500 K / T2) x (1 atm)
= 1.131 atm
Solving for T2, we get:
T2 = (n2 / n1) x (P1 / P2) x T1
= (0.9786 mol / 0.8546 mol)
To know more about final pressure visit:-
https://brainly.com/question/30862968
#SPJ1
Question:
A vessel contains a stoichiometric mixture of butane and air. The vessel is at a temperature of 500 K, a pressure of 1 atm, and has a volume of 5 L. If the reaction goes to completion, what volume of gas will be present in the vessel after the reaction and what will be the final pressure and temperature? Assume ideal gas behavior and that the reaction occurs with complete combustion.
does any solid cu(oh)2 form when 0.075 g koh is dissolved in 1.0 l of 1.0 x 10 -3 m cu(no3)2? ksp of cu(oh)2
Yes, a solid Cu(OH)2 will form when 0.075 g KOH is dissolved in 1.0 L of 1.0 x 10^-3 M Cu(NO3)2. 0.107 g of solid Cu(OH)2 will form.
First, we need to determine the amount of Cu2+ ions present in the solution:
1.0 x 10^-3 M Cu(NO3)2 means that there are 1.0 x 10^-3 moles of Cu2+ ions per liter of solution.
Next, we can use stoichiometry to determine the amount of OH- ions that will react with the Cu2+ ions to form Cu(OH)2. The balanced chemical equation for this reaction is:
Cu2+ (aq) + 2OH- (aq) → Cu(OH)2 (s)
For every 1 mole of Cu2+ ions, we need 2 moles of OH- ions. Therefore, the total amount of OH- ions needed to react with all of the Cu2+ ions in the solution is:
2 x 1.0 x 10^-3 mol = 2.0 x 10^-3 mol
Now we can use the Ksp of Cu(OH)2 to calculate the concentration of Cu2+ and OH- ions in the solution. The Ksp expression for Cu(OH)2 is:
Ksp = [Cu2+][OH-]^2
Since we know the Ksp value for Cu(OH)2, we can solve for either [Cu2+] or [OH-]. Let's solve for [OH-]:
Ksp = [Cu2+][OH-]^2
4.8 x 10^-20 = (1.0 x 10^-3 M)[OH-]^2
[OH-]^2 = 4.8 x 10^-17
[OH-] = 2.2 x 10^-9 M
Therefore, the concentration of OH- ions in the solution is 2.2 x 10^-9 M. Since we need 2 moles of OH- ions for every mole of Cu2+ ions, we know that the concentration of Cu2+ ions is half of the concentration of OH- ions:
[Cu2+] = 1.1 x 10^-9 M
Finally, we can use the molar mass of Cu(OH)2 to determine the mass of solid that will form:
Molar mass of Cu(OH)2 = 97.56 g/mol
1 mole of Cu(OH)2 is formed for every mole of Cu2+ ions, so the mass of Cu(OH)2 that will form is:
0.0011 mol x 97.56 g/mol = 0.107 g
Therefore, 0.107 g of solid Cu(OH)2 will form when 0.075 g KOH is dissolved in 1.0 L of 1.0 x 10^-3 M Cu(NO3)2.
For more such questions on solid , Visit:
https://brainly.com/question/28631710
#SPJ11
Which of the following does "cup A" represent in the experimental set-up?
independent variable - it is changed for each group to test for results
dependent variable - it is what is measured
control - it is kept the same (no experimental treatment) to keep the results reliable
none of the above
Cup A represents the independent variable in the experimental set-up. An independent variable is a variable that is changed for each group in an experiment to see what effect it has on the results.
In this case, Cup A is the independent variable because it is the one that is being changed or manipulated in the experiment. For example, in this set-up, cup A might contain different amounts of a certain nutrient to see how it affects the growth of the plants. The dependent variable is what is measured, such as the growth rate of the plants. The control is kept the same (no experimental treatment) to keep the results reliable and to act as a comparison to the experimental results. This control is used to make sure that any changes in the dependent variable are due to the independent variable and not some other factor.
To learn more about independent variable click here https://brainly.com/question/1479694
#SPJ1
what is the name of the material that resists oxidation at elevated temperatures so air can be used as a plasma gas?
The material that resists oxidation at elevated temperatures so air can be used as a plasma gas is stain steel.
Stаinless steels аre most commonly used for their corrosion resistаnce. The second most common reаson stаinless steels аre used is for their high temperаture properties; stаinless steels cаn be found in аpplicаtions where high temperаture oxidаtion resistаnce is necessаry, аnd in other аpplicаtions where high temperаture strength is required.
The high chromium content which is so beneficiаl to the wet corrosion resistаnce of stаinless steels is аlso highly beneficiаl to their high temperаture strength аnd resistаnce to scаling аt elevаted temperаtures.
For more information about stаinless steels refers to the link: https://brainly.com/question/13292254
#SPJ11
I NEED HELP ON THIS ASAP!
The correct numbers and symbol of elements represented by X are: (1). calcium (2). 18 (3) 15
The Atomic symbolThe element's symbol, atomic number, and mass number must all be known in order to create the notation of an atom. Atomic number is written as a subscript, and the mass number of the atom appears above the symbol.We can calculate the mass of an atom by adding the numbers of protons and neutrons. The letter "A" is used to signify it. An atom's atomic number is determined by how many protons are found in its nucleus or how many electrons are present in an electrically neutral atom. The letter "Z" is used to signify it.For more information on atomic formula kindly visit to
https://brainly.com/question/29455002
#SPJ1
how many moles of oh- are in 55.85 ml of 0.350 m naoh? do not include units and place answers in 3 sig figs. be sure to include any zeros before the decimal and do not put answer in scientific notation.
The number of moles of OH- in 55.85 mL of 0.350 M NaOH is 0.01976 moles.
This can be calculated using the following equation:
the number of moles of OH- in 55.85 mL of 0.350 M NaOH is 0.01976 moles with 3 significant figures.
To determine the number of moles of OH⁻ present in 55.85 mL of 0.350 M NaOH, we use the formula;
Molarity = Moles of solute ÷ Volume of solution in L
It can be simplified to:
Molarity = Moles of solute ÷ (Volume of solution in mL ÷ 1000)Moles of solute = Molarity × (Volume of solution in mL ÷ 1000)
Thus, the number of moles of OH⁻ present in 55.85 mL of 0.350 M NaOH is given by;
Moles of OH⁻ = 0.350 M × (55.85 mL ÷ 1000) = 0.0196 moles
Therefore, there are 0.0196 moles of OH⁻ present in 55.85 mL of 0.350 M NaOH.
For more such questions on moles , Visit:
https://brainly.com/question/29367909
#SPJ11
of the five chemical types of recyclable plastics listed in the lab manual document, which should give the simplest infrared spectrum, and why?
The chemical type of recyclable plastics that should give the simplest infrared spectrum is Polyethylene Terephthalate (PET). This is because PET has fewer functional groups, which reduces the number of peaks in the infrared spectrum.
What is infrared spectroscopy?Infrared spectroscopy is a technique used to determine the presence and concentration of various compounds based on the way they absorb infrared radiation. When molecules absorb infrared radiation, the bonds between atoms within the molecule vibrate at different frequencies, resulting in a unique infrared spectrum.
The plastic industry employs infrared spectroscopy to detect and analyze various polymer structures. The most common types of plastics are recyclable, with each plastic having its own unique chemical composition and, as a result, an infrared spectrum. Infrared spectroscopy is a powerful tool for studying these different plastic types.
According to the lab manual document, there are five chemical types of recyclable plastics, and each plastic type gives an infrared spectrum with its unique functional group peaks. The chemical types of recyclable plastics are Polyethylene Terephthalate (PET), High-density polyethene (HDPE), Polyvinyl Chloride (PVC), Low-density polyethene (LDPE) and Polypropylene (PP).
To know more about Infrared spectroscopy:
https://brainly.com/question/13265448
#SPJ11
Can you please explain the answer to 47.?
Answer:
The boiling point of water depends on the pressure exerted on its surface. At standard atmospheric pressure, which is about 101.3 kPa, water boils at 100°C (212°F).
However, in this case, the pressure on the surface of water is 30 kPa, which is lower than standard atmospheric pressure. As the pressure decreases, the boiling point of water also decreases.
To determine the boiling point of water at 30 kPa, we can use a steam table or a phase diagram of water. According to a steam table, at 30 kPa, the boiling point of water is approximately 35.3°C (95.5°F).
Therefore, if the pressure on the surface of the water is 30 kPa, the water will boil at approximately 30°C
ms. salis explains to her class that sodium (na) and chlorine (cl) atoms bond to make table salt (nacl). which is the best description of table salt?
Two elements, sodium (Na) and chlorine (Cl) come together, they form a compound called sodium chloride (NaCl), which is also known as table salt.
Table salt is that it is a chemical ionic compound made up of sodium and chlorine atoms that are bonded together.
Table salt is one of the most common chemical compounds found on earth. It is a white, crystalline substance that is highly soluble in water. It is used in many ways, including cooking, preserving food, and as a seasoning.
Table salt has a number of properties that make it useful in various applications. It is highly reactive with other chemicals, which makes it a good cleaning agent.
It is also highly conductive, which makes it useful in electrochemical applications. Additionally, it is non-toxic, which makes it safe to use in food applications.
Learn more about table salt here:
https://brainly.com/question/5528908
#SPJ11
what city near the chernobyl nuclear power plant was completely evacuated following the nuclear disaster and remains a ghost town today?
The city of Pripyat, Ukraine, located approximately 2.5 miles away from the Chernobyl Nuclear Power Plant, was completely evacuated following the nuclear disaster of April 26th, 1986.
This city, which was home to nearly 50,000 residents at the time, remains a ghost town today. The Chernobyl Nuclear Power Plant was in the process of conducting a safety test at the time of the disaster, which involved shutting down the reactor and ensuring its safety systems were working. Unfortunately, a flaw in the reactor caused a chain reaction and led to a large amount of radiation being released into the environment.
The fallout from the disaster was massive, and the nearby city of Pripyat was severely affected. In response, the Ukrainian government ordered the entire city to be evacuated immediately. Over the course of three days, 50,000 residents were relocated to safer areas, leaving the city a ghost town. Today, Pripyat is still considered uninhabitable and is a popular tourist attraction. Tourists can explore the deserted city and observe the effects of the disaster firsthand.
To know more about nuclear power plant click on below link :
https://brainly.com/question/4246037#
#SPJ11
would you expect the binding energy for a valence electron in gallium (ga) to be higher or lower than that of a valence electron in calcium (ca)? why?
The binding energy for а vаlence electron in gаllium is expected to be lower thаn thаt of а vаlence electron in cаlcium. This is becаuse of the presence of more protons in cаlcium аs compаred to gаllium.
А vаlence electron is thаt electron thаt is present in the outermost shell of аn аtom. Its energy level depends on the number of protons in the аtom's nucleus. The greаter the number of protons, the greаter the binding energy of the vаlence electron would be. Binding energy refers to the аmount of energy required to remove аn electron from аn аtom.
For vаlence electrons, the binding energy is аlwаys less thаn the energy required to remove inner electrons. The reаson behind this is thаt inner electrons аre closer to the nucleus, аnd hence, аre more strongly bound to it. Whereаs, vаlence electrons аre further аwаy, аnd their binding energy is weаker.
In the given cаse, cаlcium hаs 20 protons in its nucleus, whereаs gаllium hаs only 31. Hence, it is expected thаt the binding energy for а vаlence electron in cаlcium would be higher thаn thаt of gаllium, due to the lаrger number of protons.
For more information about binding energy refers to the link: https://brainly.com/question/30073915
#SPJ11
suppose you have only 1.9 g of sulfur for an experiment and you must do three trials using 0.030 mol of s each time. do you have enough sulfur
Yes, you have enough sulfur for three trials. This is because 1.9 g of sulfur is equal to 0.09 mol, which is enough to do three trials of 0.030 mol each. Use the molar mass of sulfur, which is 32 g/mol.
Convert the mass of sulfur given to moles.
1.9 g / 32 g/mol = 0.09 mol
The moles by the number of trials you need to do:
0.09 mol x 3 trials = 0.27 mol
The moles back to grams to make sure you have enough sulfur:
0.27 mol x 32 g/mol = 8.64 g
Since the amount of sulfur given is more than the amount you need for the three trials (1.9 g > 8.64 g), you have enough sulfur.
to know more about sulfur refer here:
https://brainly.com/question/1478186#
#SPJ11
how many ml of alcohol and how many ml of water are needed to prepare a 35% alcohol solution containing 15.0 ml alcohol
To prepare a 35% alcohol solution containing 15.0 ml of alcohol, you will need 27.9 ml of water and 15 ml of alcohol.
To calculate this, you can use the equation C1V1 = C2V2, where C1 is the concentration of the alcohol (in this case, 35%), V1 is the volume of alcohol you need (15 ml), C2 is the desired concentration of the solution (35%), and V2 is the total volume of the solution (25 ml).
To prepare a 35% alcohol solution containing 15.0 ml alcohol, you will require 27.9 ml of water. The amount of alcohol and water required to prepare a 35% alcohol solution containing 15.0 ml alcohol is given below:
Given data:
Volume of alcohol = 15 ml% of alcohol = 35%Let us find the amount of water required.
Volume of solution = Volume of alcohol + Volume of waterUsing the above formula, Volume of solution = 15 + Volume of water
Let us find the percentage of water in the solution.
35% alcohol solution implies that the solution contains 35 ml of alcohol in 100 ml of solution. Therefore, the amount of solution that contains 1 ml of alcohol is:
1 ml of alcohol = (100 / 35) ml of solution = 20 / 7 ml of solution= 2.86 ml of solution.Therefore, the amount of solution required to prepare 15 ml of alcohol is:
15 ml of alcohol = 15 × (2.86 ml of solution) = 42.9 ml of solution.Using the formula for volume of solution, 42.9 ml of solution = 15 ml of alcohol + Volume of water.
Volume of water = 42.9 ml of solution - 15 ml of alcohol= 27.9 ml.Therefore, you will require 15 ml of alcohol and 27.9 ml of water to prepare a 35% alcohol solution containing 15 ml of alcohol.
For more equations related to concentration.
https://brainly.com/question/10725862
#SPJ11
which of the following is an appropriate use for reflux? to remove the solvent from a reaction mixture to carry out a reaction that needs heating to prepare a sample for filtration
A. to remove the solvent from a reaction mixture
What is a Flux?Flux is a term used to describe the flow of energy, particles, or material in a given area. It is typically used to describe the rate of flow of a certain substance, such as the rate of electrons flowing through a circuit.
Flux is also used to describe the concentration of a certain substance in a given area. For example, the amount of a particular chemical in an environment can be described as a flux. Flux is also used to describe the rate of change in a given system, such as the rate of temperature change in a room over time.
Finally, flux can refer to the rate at which energy is exchanged between two objects, such as the rate of heat exchange between two objects.
Learn more about Flux here:
https://brainly.com/question/29221352
#SPJ1