Why does calcium chloride have a greater affect on colligative properties verses sodium
chloride?

Answers

Answer 1

Answer:

Calcium chloride is very effective, working at temperatures below most products, and is significantly more effective than sodium chloride because of its ability to extract moisture from its surroundings and to cause exothermic or heat generating reactions.

Explanation:

Hope this helps


Related Questions


What is the work done in lifting 60 kg of blocks to a height of 20m

Answers

Answer:

The answer is 1200

Explanation:

3. Suppose Earth orbited a star whose mass was double the mass of the sun. If the radius of Earth's orbit remained
the same as it is now, then compared with gravitational force between Earth and the sun, the gravitational force
between Earth and the star would be -
A. half as much
B. the same
C. two times as much
D. four times as much

Answers

Answer:

F1 = G M m / R^2       current force on earth

F2 = G M * 2 m / R^2     force if mass were doubled

F2 / F1 = 2         the force would be twice as large

The gravitational force between two objects not only depends on the mass but also the distance between them. If the distance to the star is same as to sun, then by doubling mass force also doubles. Thus option C is correct.

What is universal law of gravitation?

Gravitational force is the attractive force by which an object attracts other objects into its centre of mass. We are all standing in the ground because of the gravitational pull by earth.

The gravitational force between two objects of mass M1 and M2 at a distance r is written as follows:

g = G M1 M2/ r ² . where, G is gravitational constant.

As per this relation, gravitational force is directly proportional to the mass and inversely proportional to the square of the distance.

If the star has a distance from earth equal to the distance between sun and earth, but its mass is double the mass of sun, then the gravitational force will be two times compared with the sun.

To find more on gravitational force, refer here:

https://brainly.com/question/12528243

#SPJ2

A 50.0 kg crate is pulled 375 N of force applied to a rope. The crate slides without friction.
After being pulled 3.07 meters the crate has a velocity of 5.61 m/s. What is the angle (degrees) made by the rope with the horizontal?

Answers

Hi there!

We can use the work-energy theorem to solve.

Recall that:

[tex]\large\boxed{W = \Delta KE = \frac{1}{2}mv_f^2 - \frac{1}{2}mv_i^2}[/tex]

The initial kinetic energy is 0 J because the crate begins from rest, so we can plug in the given values for mass and final velocity:

[tex]W = \frac{1}{2}(50)(5.61^2) = 786.8025 J[/tex]

Now, we can define work:

[tex]\large\boxed{W = Fdcos\theta}}[/tex]

Now, plug in the values:

[tex]786.8025 = Fdcos\theta\\\\786.8025 = (375)(3.07)cos\theta[/tex]

Solve for theta:

[tex]cos\theta = .6834\\\theta = cos^{-1}(.6834) = \boxed{46.887^o}[/tex]

I keep people warm I come in many different colors, styles, and materials. many people use me when they sit on a couch

Answers

Answer:

a seat

Explanation:

The phrase “seat value” is used in the hospitality and bar sectors to describe how much money each seat or square foot of customer area must generate to justify its existence.

What is the use of seat by the people?

An area to sit is a seat. The phrase may also refer to headquarters in a more general meaning as well as extra elements such a back, armrest, and head restraint.

Being in the centre allows you to benefit from both the advantages of both front and back seating while balancing out their extremes. While you're still close enough to be paying careful attention to the lecture, the middle rows will relieve you of the pressure and expectations of the front.

By remaining seated, students help avoid physical altercations. There is more time spent on task when pupils are seated.

Environmental psychology, which gives people the impression that they have some degree of influence over their daily lives, is the driving force behind all of this behavior.

Therefore, seat used by people.

Learn more about seat here:

https://brainly.com/question/19261993

#SPJ2

Is the image formed by a plane mirror always real?

True or false?​

Answers

this statement is false

Find the area of the given figure

Answers

Answer:

77 sq.cm

Explanation:

Solution,

Trapezium

Perpendicular (P1)=8cm

Perpendicular(P2)=14cm

height(h)=7cm

Now,

We know that,

Area(A)= 1/2 ×h (P1+P2)

= 1/2 × 7cm (8cm+14cm)

= 1/2 × 7cm(22cm)

= 1/2 × 154 squarecm

=77 sq.cm

How long will it take a projectile to hit the ground if it is launched at 4.2 m/s off a 12.6 m high platform?

Answers

Answer: 3

Explanation:

I think you are supposed to divided in those problems? I'm not sure but if you aren't then please let me know. The equation I did was:

12.6 / 4.2 = 3

Hope this helps!! :)

What should you do before inserting a wire into an outlet box?
A. Place a bushing inline.
B. Remove a foot of the outer covering.
C. Clean the terminals.
D. Strip at least three inches and re-twist the strands to retighten.

Answers

The first thing that you should do before inserting a wire into an outlet box is to remove a foot of the outer covering.

What is an outlet box?

The outlet box is sometimes called the junction box. It is from this point that  power is distributed to appliances in the home. Its main function is to protect against short circuits.

The first thing that you should do before inserting a wire into an outlet box is to remove a foot of the outer covering.

Learn more about the outlet box:https://brainly.com/question/13958361?

#SPJ1

alcohol thermometer cannot measure the thermometer of boiling water ,why?​

Answers

Explanation:

The contents of alcohol are less toxic and will evaporate quickly as compared to the mercury-in-glass thermometer. Since, alcohol starts boiling at 80℃ while the boiling point of mercury is 375℃. ... So, an alcohol thermometer cannot measure the temperature of boiling water as it has the limit to measures up to 80℃.

Now you need to put handles on your cookware! You have five different options, including metals and nonmetals such as wood. Based on specific heat, which material would be the best choice? the material with the smallest specific heat the material with the greatest specific heat the material whose specific heat is farthest from the specific heat of the metal pan the material whose specific heat is closest to the specific heat of the metal pan.

Answers

Answer: B the material with the greatest specific heat

Explanation:

Just did the assignment

Answer:

B. The material with the greatest specific heat

Explanation:

what are the ending materials produced from cell respiration

Answers

Carbon dioxide and water :) hope this helped!

Answer:

The products of cellular respiration are carbon dioxide and water

Explanation:

A 66 kg student stands on a very light, rigid board that rests on a bathroom scale at each end as shown in (Figure 1).

Answers

The reading on the scale is equal to the weight of the student which is 646.8 N.

The given parameters;

mass of the student, m = 66 kg

The reading on the scale is determined by applying Newton's second law of motion as follows;

[tex]R = ma+ mg\\\\R = m(a + g)\\\\R = m(0 + g)\\\\R = mg[/tex]

The student is at rest and not accelerating, a =0

[tex]R = 66 \times 9.8\\\\R = 646.8 \ N[/tex]

Thus, the reading on the scale is equal to the weight of the student which is 646.8 N.

The complete question is below:

A 66 kg student stands on a very light, rigid board that rests on a bathroom scale at each end as shown in (Figure 1). what is the reading on the scale?

Learn more about Newton's second law here: https://brainly.com/question/3999427

Initial Velocity is 27.5 m/s. Time is 42 seconds. Final Velocity is 4.5 m/s. Solve for acceleration.

Answers

Answer:

-0.5476

Explanation:

a=(Vf-Vi)/t

a=(4.5-27.5)/42

a=-0.547619047

acceleration≈-0.5476

A loaded truck collides with a car causing huge damage to the car. Which of the following is true about the collision? *

A. The force on the truck is greater than the force on the car
B. The force on the car is greater than the force on the truck
C. The force on the truck is the same in magnitude as the force on the car
D. During the collision the truck makes greater displacement than the car
E. During the collision the truck has greater acceleration than the car

Answers

The force on the truck is the same in magnitude as the force on the car.

The impulse experienced by an object during collision is directly proportional to the applied force and time of collision of the objects.

J = Ft

where;

J is the impulse experienced by the objectt is the time

The increase in the force applied to an object causes an increase in the impulse experienced by the object.

Also, according to Newton's third law of motion, the force exerted on the loaded truck and the car are equal in magnitude but opposite in direction.

Thus, we can conclude that, the force on the truck is the same in magnitude as the force on the car.

Learn more about Newton's third law of motion here: https://brainly.com/question/25998091

Where in an equation for photosynthesis does glucose belong? on the left, because it is a product on the left, because it is a reactant on the right, because it is a product on the right, because it is a reactant

Answers

Answer: The answer is on the right, because it is a product.

Explanation: During photosynthesis, light energy converts carbon dioxide and water (the reactants) into glucose and oxygen (the products).

Glucose belongs to the right side in photosynthesis equation because it is a product on the right.

What is Photosynthesis?Photosynthesis is the conversion of light energy into chemical energy by green plants and other organisms. Light energy is collected and utilized by green plants during photosynthesis to transform water, carbon dioxide, and minerals into oxygen and energy-rich organic molecules Glucose.photosynthesis equation can be written as

6CO2 + 6H2O → C6H12O6 + 6O2.

Carbon dioxide + Water → Glucose + oxygen

Hence, the correct option is C.

To know more about Photosynthesis here

https://brainly.com/question/1388366

#SPJ2

A car traveling at 100 km/hr strikes and unfortunate bug and splatters it.the net force of impact is

Answers

Answer:

it's zero

Explanation:

it is there is your answer

A bullet of mass M1 is fired towards a block of mass m2 initially at rest at the edge of a frictionless table of height h as in the figure. The initial speed of the bullet is vi . Consider two cases, a completely inelastic one and an elastic one,where the bullet bounces off the block. inelastic case elastic case a bullet inside no bullet inside A B A' B' What is the ratio of the flight time; i.e., tAB tA′B′ ?

Answers

The ratio of time of flight for inelastic collision to elastic collision is 1:2

The given parameters;

mass of the bullet, = m₁mass of the block, = m₂initial velocity of the bullet, = u₁initial velocity of the block, = u₂

Considering inelastic collision, the final velocity of the system is calculated as;

[tex]m_1u_1 + m_2u_2 = v(m_1 + m_2)\\\\m_1u_1 + 0 = v(m_1 + m_2)\\\\v= \frac{m_1u_1}{m_1 + m_2} \ -- (1)\\\\[/tex]

The time of motion of the system form top of the table is calculated as;

[tex]v = u + gt\\\\v = 0 + gt\\\\v = gt\\\\t= \frac{v}{g} \\\\t_A = \frac{m_1u_1}{g(m_1 + m_2)} \ \ ---(2)[/tex]

Considering elastic collision, the final velocity of the system is calculated as;

[tex]m_1u_1 + m_2 u_2 = m_1v_1 + m_2v_2\\\\m_1u_1 + 0 = m_1v_1 + m_2v_2\\\\m_1 u_1 = m_1v_1 + m_2v_2[/tex]

Apply one-directional velocity

[tex]u_1 + (-v_1) = u_2 + v_2\\\\u_1 -v_1 = 0 + v_2\\\\v_1 = v_2 -u_1[/tex]

Substitute the value of [tex]v_1[/tex] into the above equation;

[tex]m_1u_1 = m_1(v_2 - u_1) + m_2 v_2\\\\m_1u_1 = m_1v_2 -m_1u_1 + m_2v_2\\\\2m_1u_1 = m_1v_2 + m_2v_2\\\\2m_1u_1= v_2(m_1 + m_2)\\\\v_2 = \frac{2m_1u_1}{m_1+ m_2} \ --(3)[/tex]

where;

[tex]v_2[/tex] is the final velocity of the block after collision

Since the bullet bounces off, we assume that only the block fell to the ground from the table.

The time of motion of the block is calculated as follows;

[tex]v_2 = v_0 + gt\\\\v_2 = 0 + gt\\\\t = \frac{v_2}{g} \\\\t_B = \frac{v_2}{g} \\\\ t_B = \frac{2m_1u_1}{g(m_1 + m_2)} \ \ ---(4)[/tex]

The ratio of time of flight for inelastic collision to elastic collision is calculated as follows;

[tex]\frac{t_A}{t_B} = \frac{m_1u_1}{g(m_1 + m_2)} \times \frac{g(m_1 + m_2)}{2m_1u_1} \\\\\frac{t_A}{t_B} = \frac{1}{2} \\\\t_A:t_B = 1: 2[/tex]

Learn more about elastic and inelastic collision here: https://brainly.com/question/7694106

Jeremiah rides his bicycle 4 miles in 30 minutes. If he maintains this rate, how far will he ride in 3 hours?

Answers

Answer:

24 miles.

Explanation:

3 hours=180 minutes

180÷30=6

6x4=24

what is momentum?
what is period of an oscillating body?
what is friction?

Answers

Answer:

Explanation:

Momentum is the quantity of motion of a moving body, measured as a product of its mass and velocity.

The period of an oscillating body is the smallest interval of time in which a system undergoing oscillation returns to the state it was in at a time arbitrarily chosen as the beginning of the oscillation.

Friction is a force between two surfaces that are sliding, or trying to slide, across each other.  Friction always slows a moving object down. The amount of friction depends on the materials from which the two surfaces are made. The rougher the surface, the more friction is produced.

Two 3.0g bullets are fired with speeds of 40.0 m/s
and 80.0 m/s, respectively. What are their kinetic
energies? Which bullet has more kinetic energy? What is the ratio of their kinetic energies?

Answers

Two 3.0g bullets are fired with speeds of 40.0 m/s and 80.0 m/s, respectively. Mass of the 1st bullet (m1) = 3 g = 0.003 KgMass of the 2nd bullet (m2) = 3 g = 0.003 KgVelocity of the 1st bullet (v1) = 40 m/sVelocity of the 2nd bullet (v2) = 80 m/sWe know, kinetic energy of a body

[tex] = \sf \frac{1}{2} m {v}^{2} [/tex]

Kinetic energy of the 1st bullet [tex] \sf = \frac{1}{2} \times m1 \times {(v1)}^{2} \\ \sf= \frac{1}{2} \times 0.003 \times {(40)}^{2}J \\ \sf = \frac{1}{2} \times 0.003 \times 1600J \\ \sf = 2.4J[/tex]Kinetic energy of the 2nd bullet [tex] \sf = \frac{1}{2} \times m2 \times {(v2)}^{2} \\ \sf= \frac{1}{2} \times 0.003 \times {(80)}^{2}J \\ \sf = \frac{1}{2} \times 0.003 \times 6400J \\ \sf = 9.6J[/tex] So, the 2nd bullet which has greater velocity has more kinetic energy.Therefore, the ratio of their kinetic energies

[tex] \sf = \frac{2.4J}{9.6J} \\ \sf= \frac{24}{96} = \frac{1}{4} \\ \sf = 1 : 4[/tex]

Answer:

The kinetic energies of the bullets are 2.4 J and 9.6 J.

The bullet having greater velocity has more kinetic energy.

The ratio of their kinetic energies is 1 : 4.

Hope you could get an idea from here

Doubt clarification - use comment section.

The kinetic energy of the two bullets are 2.4 J and 9.6 J respectively.

The ratio of the kinetic energy of the bullets is 1:4.

What is kinetic energy?

The kinetic energy of an object is the energy possessed by the object due to its motion.

The kinetic energy of the two bullets is calculated as follows;

[tex]K.E_1 = \frac{1}{2} \times 0.003 \times 40^2 = 2.4 \ J\\\\K.E_2 = \frac{1}{2} \times 0.003 \times 80^2 = 9.6 \ J[/tex]

Ratio of the kinetic energy of the bullets is calculated as follows;

[tex]K.E_1 : K.E_2 = 2.4: 9.6 \ = \ 1: 4[/tex]

Learn more about kinetic energy here: https://brainly.com/question/25959744

A blue line with 5 orange tick marks then one red tick mark then 4 orange tick marks. The number zero is above the red tick mark. Assume each tick mark represents 1 cm. Calculate the total displacement if a toy car starts at 0, moves 5 cm to the left, then 8 cm to the right, and then 3 cm to the left. The car moves cm, so there is no displacement.

Answers

The total displacement of the toy car at the given positions is 0.

The given parameters;

First displacement of the car, = 5 cm leftSecond displacement of the car, = 8 cm rightThird displacement of the car, = 3 cm to the left

The total displacement of the car is calculated as follows;

Let the left direction be "negative direction"Let the right direction be "positive direction"

[tex]\Delta x = - \ 5\ cm \ + \ 8 \ cm \ - \ 3 \ cm \\\\\Delta x = 0[/tex]

Thus, the total displacement of the toy car at the given positions is 0.

Learn more about displacement here: https://brainly.com/question/18158577

Answer:0

Explanation:

When the mass of the cylinder increased by a factor of 3, from 1. 0 kg to 3. 0 kg, what happened to the cylindera's gravitational potential energy? It decreased by a factor of 3. It decreased by a factor of 2. It increased by a factor of 2. It increased by a factor of 3.

Answers

The mass of the cylinder increased by a factor of 3, the  gravitational potential energy increases by a factor of 3.

The given parameters:

Initial mass of the cylinder, m₁ = 1.0 kgFinal mass of the cylinder, m₂ = 3.0 kg

The gravitational potential energy of an object is calculated as follows;

P.E = mgh

where;

m is the mass

g is acceleration due to gravity

h is the height of the cylinder

when the mass = 1 kg

P.E = 1 x g x h

P.E = gh

when the mass = 3 kg

P.E = 3 x gh

P.E = 3gh

Thus, when the mass of the cylinder increased by a factor of 3, the  gravitational potential energy increases by a factor of 3.

Learn more about gravitational potential energy here: https://brainly.com/question/19768887

A crane does 9,500 J of work to lift a crate straight up using a force of 125 N. How high does the crane lift the crate? 0. 013 m 76 m 9,400 m 1,200,000 m.

Answers

The distance covered as the crane does work is 76 m.

Recall that the work done in lifting the crane is the product of force and distance covered. In this case, we are talking about the distance through which the crane is raised. Therefore;

Work done = Fs

F = Force applied

s = Distance covered

Substituting values;

Work done/Force applied = Distance covered

Distance covered = 9,500 J/125 N

Distance covered = 76 m

Learn more: https://brainly.com/question/17638582

A wave traveling at 230 m/sec has a wavelength of 2.1 meters. What is the frequency of this wave?

Answers

Answer:

109.52 Hz

Explanation:

The frequency of the wave when given it's velocity and wavelength only can be found by using the formula

[tex]f = \frac{c}{ \lambda} \\ [/tex]

where

c is the velocity of the wave in m/s

[tex] \lambda[/tex] is the wavelength in meters

From the question we have

c = 230 m/s

[tex] \lambda[/tex] = 2.1 m

[tex]f = \frac{230}{2.1} = 109.523809... \\ [/tex]

We have the final answer as

109.52 Hz

Hope this helps you

What do scientists theorize about the origins of the Moon? Choose the most accepted explanation.

Answers

Answer:

What is most widely accepted today is a the giant-impact theory. It proposes that the Moon formed during a collision between the Earth and another small planet, about the size of Mars. The debris from this impact collected in an orbit around Earth to form the Moon.

A vertical spring stretches 9.6 cm when a 1.3 kg block is hung from its end. (a) Calculate the spring constant. This block is then displaced an additional 5.0 cm downward and released from rest. Find the (b) period, (c) freque

Answers

Answer:

F = - K x

a) K = 1.3 kg * 9.8 m/s^2 / .096 m = 133 kg/sec^2

b)  ω = (K/m)^1/2     angular frequency of SHM

ω = (133 / 1.3)^1/2 = 10.1 / sec

f = 2 π ω = 6.28 * 10.1 / sec = 63.5 / sec

P = 1/f = .0157 sec

GUYS COULD SOMEONE PLEASE HELP ME?
PLEASE ASAP

Write a summary of how the eye works:

Answers

Answer:

Eye function renders you the sense of sight. They convert light into electrical signals. Afterwards, the brain deciphers these electrical signals into images. Properly working healthy eyes are able to perform the following functions.

Explanation:

Which of the following is a completely elastic collision?

A. a ball rebounds against a wall, reversing its direction, but at only half the speed.

B. Two balls collide, stick to each other, and move together after the collision.

C. Two balls collide and move at a right angle to each other after the collision at a reduced speed.

D. Two balls collide head on, each reversing its direction and traveling at half the speed.

E. A ball with velocity v collides with a ball at rest; after the collision the first ball is at rest and the second ball has velocity v.

I will mark brainliest

Answers

Hi there!

Answer E.

For a collision to be completely elastic, there must be NO LOSS in kinetic energy.

We can go through each answer choice:

A. Since the ball rebounds at half the initial speed, there is a loss in kinetic energy. This is NOT an elastic collision.

B. A collision involving sticking is an example of a perfectly INELASTIC collision. This is NOT an elastic collision.

C. A reduced speed indicates that there is a loss of kinetic energy. This is NOT elastic.

D. The balls traveling at half the speed after the collision indicates a loss of kinetic energy, making this collision NOT elastic.

E. This collision indicates an exchange of velocities, characteristic of an elastic collision. We can prove this:

Let:

m = mass of each ball

v = velocity

We have the initial kinetic energy as:

[tex]KE = \frac{1}{2}mv^2 + 0 = \frac{1}{2}mv^2[/tex]

And the final as:

[tex]KE = 0 + \frac{1}{2}mv^2 = \frac{1}{2}mv^2[/tex]

Thus, Kinetic energy is CONSERVED. This collision is ELASTIC.

describe the components of soil​

Answers

Soil contains air, water, and minerals as well as plant and animal matter, both living and dead. These soil components fall into two categories. ... Other, less common minerals include calcium, magnesium, and sulfur. The biotic and abiotic factors in the soil are what make up the soil's composition.

Facts about soil: Soil is a mixture of organic matter, minerals, gases, liquids, and organisms that together support life.

What does soil do to our earth: Advances in watershed, natural resource, and environmental sciences have shown that soil is the foundation of basic ecosystem function. Soil filters our water, provides essential nutrients to our forests and crops, and helps regulate the Earth's temperature as well as many of the important greenhouse gases.

Soil is a material composed of five ingredients — minerals, soil organic matter, living organisms, gas, and water. Soil minerals are divided into three size classes — clay, silt, and sand (Figure 1); the percentages of particles in these size classes is called soil texture.Soil contains air, water, and minerals as well as plant and animal matter, both living and dead. These soil components fall into two categories. ... Other, less common minerals include calcium, magnesium, and sulfur. The biotic and abiotic factors in the soil are what make up the soil's composition.

An 50 kg student runs and jumps onto a 25 kg tire swing, which is initially at rest, and rides the swing up into the air. The swing (and the student) then rises a vertical distance of 1.5 m. What was the initial speed, in m/s of the swing? Remember the acceleration due to gravity near Earth's surface, g = 9.81 m/s^2

A. 29 m/s

B. 5.4 m/s

C. 1.7 m/s

D. 15. m/s

E. 3.8 m/s


Will mark brainliest

Answers

Answer:

Option B, 5.4m/s

Explanation:

Using the formula v² = u ² - 2gh

v = 0(final velocity is zero at maximum height), u = ?, g = 9.81m/s², h = 1.5m

0² = u² - 2×9.81×1.5

0 = u² - 29.43

29.43 = u²

u = √29.43

= 5.42m/s

Other Questions
Integrated project 4 Can anyone help me think of a strong article title regarding this topic: my pov is that I agree with the fact that food companies and advertising are to blame for however I dont think its a lack of self control that causes obesity A sale of wedding gowns is marked at 168, which includes a reduction of 25%. What was the pre-sale price?ASAP NOW! Pls help brainiest to the correct answer! What role does love play as a theme in The Mortal Immortal? 1. Taking accurate measurements of small values using the measure many and average method. Each oscillation takes a small amount of time, and your reaction time is about 0.1 seconds. This means too much of the time you measure is your reaction time. Find out the percentage error with this calculation;a. ((reaction time)(time for one oscillation))x100=% error b. To reduce the percentage error, time for ten oscillations.c. Take the average time by dividing your answer by ten.d. Your reaction time is still the same, 0.1 s. Find out the new percentage error with this calculation; What If sea water started turning into Acidic,Would the Marine life get used to it? True or false. Mexican-Americans have isolated themselves from the Mexican culture south of the Rio Grande River. at room tmeperature none of the metals are 2 questions, 100 pointsGravitational force between objects ____________ as objects move farther apart, and it is ___________ between objects that are closer together. increases, weaker increases, stronger decreases, weaker decreases, strongerIn science, weight is measure inPoundsKelvinNewtonsLiters what are the uses of compases? THERE ARE 4 QUESTIONS BELOW!1. Mae Ling earns a weekly salary of $395 plus a 5.0% commission on sales at a gift shop. How much would she make in a work week if she sold $4,800 worth of merchandise?She would make $_______2. Ramon earns $1,865 each month and pays $53.30 on electricity. To the nearest tenth of a percent, what percent of Ramon's earnings are spent on electricity each month?Ramon spends ______% of his earnings on electricity each month.3. James, Priya, and Siobhan work in a grocery store. James makes $7.00 per hour. Priya makes 40% more than James, and Siobhan makes 15% less than Priya. How much does Siobhan make per hour?Siobhan makes $_______ per hour.4. The Hu family goes out for lunch, and the price of the meal is $46. The sales tax on the meal is 6%, and the family also leaves a 20% tip on the pre-tax amount. What is the total cost of the meal?The total cost of the meal is $__________.5. For the following real-world examples, determine whether each situation represents a percent increase or a percent decrease.Sales tax on an item is a percent ______A discount on an item is a percent _____A tip on a bill is a percent __________ A 1. 80-kg block slides on a rough, level surface. When it is traveling at 2. 00 m/s, the block hits a linear, ideal spring and compresses it by a distance of 11 cm before (momentarily) coming to rest. The coefficient of kinetic friction between the block and the surface is 0. 56. What is the force constant of the spring?. A security team is working with a client to evaluate the security of data and it functions that are most critical to the operation and success of their organization. 4/3=8/x-1Solve the equations does a person have to respond if called for jury duty Before entering the scene, an officer should note _____________. socialization is the characteristic of a social and civilized life explain. Although the U.S. Constitution grants __________ to the office of the presidency, a president who fails to uphold the public trust may be removed from office. 1. Write an equation for a line that passes through the origin and is perpendicular toy = 5x 2.