you have just installed a packet-filtering firewall on your network. which options are you able to set on your firewall? (select all that apply.) answer source address of a packet sequence number acknowledgement number port number digital signature checksum destination address of a packet

Answers

Answer 1

The Source address of a packet and the Destination address of a packet are settings that can be made on a firewall. Be aware that based on the firewall in question, other choices may be available.

Which settings are available on a firewall?

Broadly speaking, most firewalls enable you to create rules that specify which traffic is permitted to enter or leave your network. As an illustration, you may set up the firewall to only let traffic from particular IP addresses, to block specific ports, and to limit access to particular services.

A packet filtering firewall is what kind of firewall?

A network security method that controls data flow to and from a network is a packet filtering firewall.

To know more about firewall visit:-

https://brainly.com/question/13098598

#SPJ1


Related Questions

examine the ripple marks (i.e., rotate and zoom in on the 3-d sample). based on your observations, identify whether these are symmetric ripple marks or asymmetric ripple marks. choose one: a. symmetric ripple marks b. asymmetric ripple marks

Answers

Based on your observations, these are symmetric ripple marks. Symmetric ripple marks are typically the result of the fluid moving in a steady and consistent manner, often due to a steady current.


Ripple marks are sedimentary structures formed on sand or other sediment surfaces by water or air movement. The oscillation of wind or water currents over loose sediment surfaces produces these structures, which are distinguished by their wavy surface appearance.

Ripple marks are preserved in sediments as sedimentary structures, indicating past water or air movement in depositional environments.

Symmetric ripple marks are symmetrical with respect to their central axis, meaning that the stoss and lee sides are identical.

Asymmetric ripple marks have a larger angle on their stoss side than on their lee side, causing the crests to be displaced from the centerline in the direction of the steeper slope.

When the current direction changes, these ripple marks are produced. The crest lines are shifted away from the steeper slope and toward the gentler slope as the current flow direction shifts, resulting in a V-shaped asymmetrical ripple.

These ripple marks have a symmetrical, wave-like pattern that can be observed in the 3D sample.

For more such questions on symmetric ripple marks , Visit:

https://brainly.com/question/10568575

#SPJ11

the diagnose/repair function of windows firewall with advanced security allows users to troubleshoot which of the following components? (choose all that apply.) a. network adapter b. shared folders c. web browser d. internet connections

Answers

The diagnose/repair function of Windows Firewall with Advanced Security enables users to troubleshoot the following components: network adapter and internet connections. The correct answers A and D.

Windows Firewall with Advanced Security is a built-in firewall solution included in Windows operating systems. It provides advanced security features for network traffic, including inbound and outbound traffic filtering, as well as customizable firewall rules.

The diagnose/repair function of the Windows Firewall with Advanced Security allows users to troubleshoot network-related issues, including problems with the network adapter and internet connections. It analyzes the network configuration and provides suggestions for resolving connectivity issues. However, it does not diagnose or repair issues related to shared folders or web browsers.

Users can access the diagnose/repair function by opening the Windows Firewall with Advanced Security control panel and selecting the "Monitoring" option from the left-hand menu. From there, they can select the "Troubleshooting" option and follow the prompts to diagnose and resolve network connectivity issues. The correct answers A and D.

Learn more about Windows firewall:

https://brainly.com/question/10431064

#SPJ11

to make a deque behave like a stack, which methods should be used for element insertion and removal?

Answers

To make a deque behave like a stack, the methods that should be used for element insertion and removal are push() and pop().

What is a Deque?

Deque stands for a "double-ended queue," which means it is a sequence of elements in which items may be added or removed from both ends simultaneously. It has two ends, a head and a tail, and allows elements to be removed and inserted at either end.Here, we are talking about how to make a deque behave like a stack, and for that, we can use the push() and pop() methods.

Below is how they work:

Element Insertion:Push(): This method is used to insert a new element at the top of the deque. It inserts an element at the head side of the deque (left side in the above figure).

Syntax: deque.push(element)Element Removal:Pop(): This method removes and returns the top element of the deque. It removes an element from the head side of the deque (left side in the above figure).Syntax: deque.pop()

Therefore, using these methods, we can make a deque behave like a stack.

Learn more about Deque here:

https://brainly.com/question/16750037

#SPJ11

explain wear leveling and why it is needed for ssds. we said that wear-leveling is important for the continual updating of virtual memory pagefiles. what problem does wear-leveling aggravate for pagefiles?

Answers

Answer:

s the term suggests, wear leveling provides a method for distributing program and erase cycles uniformly throughout all of the memory blocks within the SSD. This prevents continuous program and erase cycles to the same memory block, resulting in greater extended life to the overall NAND flash memory.

Explanation:

you manage a network that uses multiple switches. you want to provide multiple paths between switches so that if one link goes down, an alternate path is available.

Answers

To provide multiple paths between switches, you can implement a technique called link aggregation or port aggregation, also known as EtherChannel or NIC teaming.

Link aggregation groups multiple physical links into a single logical link, providing redundancy and increased bandwidth.

There are two types of link aggregation:

Static link aggregation - This is manually configured and requires the same number of ports on each end of the link.Dynamic link aggregation - This is automatically configured and uses a standard protocol such as Link Aggregation Control Protocol (LACP) or Port Aggregation Protocol (PAgP).

To implement link aggregation, you need to ensure that the switches and the network interface cards (NICs) support the technique. You also need to configure the switches and the NICs to use the same link aggregation method. Once configured, the switches will recognize the link aggregation and automatically load balance traffic across the links.

By providing multiple paths between switches, you can ensure that if one link goes down, an alternate path is available, and the network continues to function without interruption.

To get a similar answer on Link aggregation:

https://brainly.com/question/6964275

#SPJ11

Identify the correct MLA citation for a work in an anthology

Answers

The correct MLA citation for a work in an anthology includes the author's name, the title of the work in quotation marks, the title of the anthology in italics, edited by the editor's name, the publisher, the publication year, and the page range of the work.

The general format is:

Last name, First name. "Title of Work." Title of Anthology, edited by Editor's First and Last Name, Publisher, Year of publication, Page numbers of the work.

For example:

Smith, John. "The Art of Writing." Writing in the 21st Century: A Guidebook, edited by Jane Doe, Oxford University Press, 2021, pp. 57-68.

Find out more about MLA citation

brainly.com/question/11255223

#SPJ4

which field in the tcp header provides the information for the receiving network device to understand where the actual data payload begins?

Answers

The "Data Offset" field, also known as the "Header Length" field, is a TCP header field that gives the receiving network device the knowledge it needs to determine where the real data payload starts.

What TCP header field is in charge of identifying the receiving process?

The transmission and receiving processes are identified by TCP using the IP address and port number (16-bit value), respectively. A TCP connection is uniquely identified by the two end sockets, which are pairs of an IP address and port number.

Which header field in a TCP segment is responsible for flow control?

The window size refers to how much data a source can send before an acknowledgement is required.

To know more about TCP header visit:-

https://brainly.com/question/29562357

#SPJ1

what problem could we face if we free'd one of the people pointers (steve, greg, or matt) in the picture in the problem above?

Answers

If one of the people pointers is free'd, it could lead to an undefined behavior or a segmentation fault.

The people pointers (Steve, Greg, and Matt) in the given image are initialized to point to a character array (name) that stores their respective names. If one of these pointers is freed, it will release the memory that was allocated for the corresponding character array.

However, if the freed pointer is accessed later in the program, it will lead to an undefined behavior or a segmentation fault. This is because the memory that was allocated for the character array is no longer reserved for the program, and accessing it may result in memory errors.

Therefore, it is important to always keep track of memory allocation and deallocation in a program to avoid such issues. It is also recommended to set the freed pointer to NULL after deallocating its memory to prevent it from being used accidentally.

Learn more about segmentation fault here:

https://brainly.com/question/30765755

#SPJ11

today, most data kept by companies is stored in databases. when might it be appropriate to use text files? describe the steps that must be taken when a data file is used by a program?

Answers

Today, most data kept by companies is stored in databases. However, there are some cases where text files are appropriate.

It may be appropriate to use text files when the data needs to be easily shared and edited by multiple users without the use of a database. Additionally, text files may be used in smaller projects or for temporary storage. For example, a configuration file for a program may be stored as a text file. Steps that must be taken when a data file is used by a program are:

Open the file for reading or writing: This step is performed to give the computer access to the file and ensure that the file is properly read or written.

Read or write to the file: This is the step where data is either read from or written to the file. This data can be manipulated or processed by the program.

Close the file: Once the program is finished with the file, it should be properly closed to free up resources and ensure the file is saved correctly.

Learn more about databases visit:

https://brainly.com/question/28143546

#SPJ11

a technique that lures prey into revealing passwords and other private data by providing a convincing offer is called a. mining. b. data trapping. c. ultra-collecting. d. phishing.

Answers

Phishing is a method of tricking victims into divulging passwords and other sensitive information by making a compelling offer.

What is a trick used to get victims to reveal passwords?

The term "phishing" (also known as "spoofing") refers to the practise of online con artists utilising increasingly sophisticated lures to "fish" for user password and financial information.

What is the trolling method?

A fishing technique called trolling involves drawing one or more fishing lines through the water while they are baited with lures or bait fish. This can be accomplished by casting a line behind a moving boat, slowly winding it in when casting from a stationary location, or even sweeping the line from side to side, as might be the case when casting from a pier.

To know more about Phishing visit:-

https://brainly.com/question/24156548

#SPJ1

How to fix Error "The goal you specified requires a project to execute but there is no POM in this directory" after executing maven command?

Answers

To fix the error "The goal you specified requires a project to execute but there is no POM in this directory" after executing a Maven command, follow these steps:

1. Check your current directory: Ensure that you are in the correct directory where the POM file (pom.xml) is located. If you are in the wrong directory, navigate to the correct one using the command line or terminal.

2. Verify the presence of the POM file: In the correct directory, check if the pom.xml file is present. If it is not, you will need to create one or obtain it from your project source.

3. Create a POM file if needed: If your project is missing a POM file, create a new file named pom.xml in the project directory with the appropriate content. You can find examples and documentation on how to create a POM file on the Maven website: https://maven.apache.org/guides/introduction/introduction-to-the-pom.html

4. Execute the Maven command again: Once the POM file is in the correct directory, re-run the Maven command. The error should be resolved, and the command should execute successfully.

Remember, always make sure you are in the correct directory containing the POM file when executing Maven commands to avoid this error.

To learn more about error; https://brainly.com/question/14056040

#SPJ11

in a failover cluster, what are the options for configuring the quorum model? (choose all that apply.)

Answers

There are three options for configuring the quorum model in a failover cluster: Node Majority, Node and Disk Majority, and Node and File Share Majority. So. the correct option is all of these.

In a failover cluster, there are several options for configuring the quorum model. These include:

Node Majority: This quorum model uses a majority of the cluster nodes, so at least half of the nodes must be online and functional for the cluster to stay up.

Node and Disk Majority: This quorum model uses a combination of cluster nodes and disks. All the nodes and a majority of the disks must be online for the cluster to stay up.

Node and File Share Majority: This quorum model uses a combination of cluster nodes and a designated file share witness. All the nodes and the file share must be available for the cluster to stay up. All of these options require a majority of nodes to be online and functional in order for the cluster to stay up.

So, the correct option is All of these as Node Majority, Node and Disk Majority, and Node and File Share Majority are required for configuring the quorum model.

You can learn more about the quorum model at: brainly.com/question/13164289

#SPJ11

your new company is setting up its first website with a public ip address it has leased from its isp. your manager has asked you to set up the necessary dns records so the website can be found on the web. which type of dns record will you create?

Answers

To set up a website with a public IP address, you would need to create an "A" (Address) record in DNS.

What is a Public IP Address?


A Public IP Address is a unique numeric identifier assigned to a device or network on the Internet. It allows the device or network to communicate with other devices and networks on the Internet. Public IP addresses are globally routable and can be accessed from anywhere on the Internet, making them essential for hosting websites, email servers, and other online services.

To set up a website with a public IP address, you would need to create an "A" (Address) record in DNS. This record maps a domain name to the IP address of the server where the website is hosted. The A record is the most commonly used DNS record type for mapping a domain name to an IP address.

Learn more about Public IP Address on:

https://brainly.com/question/27961221

#SPJ1

write an expression that will cause greater or equal to -10 to print if the value of user test is greater than or equal to -10.

Answers

The following is the java code that input a value from user and print if it is greater than or equal to -10.

Java code:

import java.io.*;

import java.util.Scanner;

public class Main {

public static void main(String args[]) throws IOException {

    Scanner scn = new Scanner(System.in);

// Data entry

 System.out.print("Input: ");

 int value = scn.nextInt();

// Output

 if (value>=-10) {

  System.out.println("Value of user test is greater or equal than -10");

 } else {

  System.out.println("Value of user test is no greater or equal than -10");

 }}}

The previous code shows how the logical operator greater than or equal to is used to evaluate a condition, and if the result of the operation is true, the corresponding message is printed, and if the conditional evaluated is false, a different message is also printed.

Full question: Write an expression that input a value from user, and print if it is greater than or equal to -10.

For more information on  simple conditional structure see: https://brainly.com/question/26789430

#SPJ11

what is the internet​

Answers

Answer:

The internet is a vast network of interconnected computer systems and devices that communicate with each other using a common set of communication protocols.

consider this sequence of bits: 010101010011001101001011 000001011000000100111100 011001011000001010010111 010111110001000111100111 010110110010011010111000 what is true about this binary data?

Answers

The given sequence of bits consists of 80 bits, organized into five groups of sixteen bits each.

It is worth noting that there are various ways to interpret and analyze binary data, including the use of compression algorithms such as byte pair encoding. Additionally, in some cases, it may be necessary to convert binary data to different formats, such as little-endian representation, to work with certain systems or applications. However, without additional context or information about the specific purpose or use case of the given sequence of bits, it is not possible to determine any additional truths or insights about the data.

Find out more about compression algorithms

brainly.com/question/28500827

#SPJ4

6. question 6 a data analyst sorts a spreadsheet range between cells d5 and m5. they sort in descending order by the third column, column f. what is the syntax they are using? 1 point

Answers

The data analyst is using the following syntax to sort the third column, column F, between cells D5 and M5, in descending order: =sort (D5:M5, 3, FALSE)

When would a data analyst alter data using spreadsheets or query languages in order to make conclusions?

At the analyse process, data is transformed using data analytics tools like spreadsheets and query languages so that judgements may be made with confidence.

When is information acquired on targeted variables recognised as a data requirement in the data analysis process?

The process of gathering data on specific variables designated as data needs is known as data collection.

To know more about data visit:-

https://brainly.com/question/11941925

#SPJ1

It is a good idea to make a copy constructor's parameters ___ by specifying the ____ keyword in the parameter list
a) inline, inline
b) static, static
c) constant, const
d) global, global
e) none of these

Answers

It is a good idea to make a copy constructor's parameters constant by specifying the const keyword in the parameter list. viz. c.) constant, const.

What exactly is a constructor?

A constructor is a particular method used to build an object in object-oriented programming. The constructor is in charge of establishing the object's initial state, including any member variables or other data. The constructor is automatically called when an object is created, making it an important aspect of the object's lifetime.

A copy constructor produces a new object with identical characteristics to an existing object. The copy constructor is used to generate a new object that is the same as the original but has different memory addresses. The parameters of the copy constructor must be constant since they are not anticipated to change when the constructor is invoked.

The answer to the question is that it is a good idea to make a copy constructor's parameters constant by specifying the const keyword in the parameter list, viz, Option C.

Learn more about constructors:

https://brainly.com/question/28258193

#SPJ11

you need to review the logs on a windows machine that's experiencing a lot of crashes. from powershell, you plan on using the get-eventlog command but need to use an option to see which logs are available. what is the full command you should use?

Answers

The full command you should use to review the logs on a Windows machine from PowerShell is Get-EventLog -List. This command allows you to view all available event logs on the machine.

The Get-EventLog command retrieves event logs from the Windows event logs and other sources. The -List option displays a list of all event logs, including both system and application-specific logs, that are currently installed and configured on the system.

Once you have a list of available logs, you can view their contents by using the Get-EventLog command and specifying the source, event log, and event id. For example, if you want to view the events from the System log, you would use the following command: Get-EventLog -LogName System. This will display all of the events in the System log.

By using the Get-EventLog -List command, you can quickly and easily review the logs on a Windows machine that is experiencing a lot of crashes. This will allow you to pinpoint the issue and take the necessary steps to address it.

You can learn more about commands at: brainly.com/question/28232553

#SPJ11

the written version of a television commercial that provides a detailed description of its video and audio content is known as a

Answers

The written version of a television commercial that provides a detailed description of its video and audio content is known as a script.

A script is a written version of a television commercial that provides a detailed description of its video and audio content. The script is a document that the advertising team creates before the shooting of a TV commercial. It outlines the story, dialogue, camera work, sound effects, music, and other components of the advertisement.

A script is useful for organizing and simplifying the production of the commercial. As a result, it aids the production team in streamlining their efforts and minimizing errors. A script has a significant impact on the commercial's success because it is the foundation upon which the advertisement is constructed.

For such more question on script:

https://brainly.com/question/18881690

#SPJ11

if you are experiencing slow performance on a system and think that the ssd hard drive is the problem, you can run defrag and optimization. what does defrag do with the data on an ssd hard drive?

Answers

It issues a retrim command to clear out all blocks that contain useless material.

How does SSD differ from a hard drive?A new type of computer storage component is the solid-state drive (SSD). Faster than the conventional hard discs they have replaced, SSDs store data using flash-based memory. On a laptop or computer, SSDs are renowned for offering internal storage.  A simple and portable method of storing all of your files is on external storage.SSDs are particularly dependable since they lack moving parts. In actuality, the majority of SSDs have a lifespan of over five years, while the longest-lasting models have a lifespan of over ten years. In contrast, how frequently you write data to your SSD will determine how long it will live, so you may use that information to predict its longevity.

Therefore, the correct option is b) It sends a retrim command to erase all blocks that are filled with unused data.

The complete question is:

If you are experiencing slow performance on a system and think that the SSD hard drive is the problem, you can run Defrag and Optimization. What does Defrag do with the data on an SSD hard drive?

a. It rearranges fragments or parts of files in contiguous clusters.

b. It sends a retrim command to erase all blocks that are filled with unused data.

c. It rewrites the entire hard drive data.

d. It cleans all unnecessary data from the hard drive.

To learn more about SSD hard drive, refer to:

https://brainly.com/question/30121535

in oracle, a strictly relational table can be accessed as if it were an object table using a mechanism called: a. object view. b. nested tables. c. embedded objects. d. row objects.

Answers

Option-A: In Oracle, a strictly relational table can be accessed as if it were an object table using a mechanism called Object View.

A view is a stored SQL query that allows a user to query the data in multiple tables as if they were a single table.An object table is a table that is built with object type columns. An object type is a custom-defined composite data structure that is used as the datatype for one or more columns of a table or object view. For each row of an object table, the object type determines the attributes that are stored in the object column.

An object view is a type of view that is used to access data in a strictly relational table as if it were an object table. To create an object view, you define an object type that maps the columns of the relational table to the attributes of the object type. The object view then exposes the columns of the relational table as attributes of the object type, and you can use the object view to query and manipulate the data as if it were an object table.

For such more questions on Oracle:

brainly.com/question/13384148

#SPJ11

you manage a single domain named widgets. organizational units (ous) have been created for all company departments. computer and user accounts have been moved into their corresponding department ous. the ceo has requested the ability to send emails to managers and team leaders. he'd like to send a single email and have it automatically forwarded to all users in the list. because the email list might change frequently, you do not want the email list to be used for assigning permissions. what should you do?

Answers

What should you do?To meet this requirement, you should create an email distribution group in Microsoft Exchange that contains all managers and team leaders. Then, you should give the CEO the required permission to send an email to this distribution group.

In this way, you can ensure that the list of users receiving the email will be kept up to date, and the list will not be used to assign permissions.A distribution group is a group of email addresses that can be used to send an email to many users simultaneously. They are often used to create email distribution lists that are used for company communication, marketing, and more. Distribution groups are available in most email clients, including Microsoft Exchange. They can be used to create email distribution lists that are easy to manage and are flexible enough to handle any changes to the group that may occur over time.

Learn more about Microsoft Exchange: https://brainly.com/question/30300718

#SPJ11

when using aws documentation pages, what is the best way to be sure the information that you are reading is up-to-date?

Answers

When using aws documentation pages, the best way to be sure the information you are reading is up-to-date is to check the date of the documentation page.

AWS Documentation is a website that offers resources, reference materials, and tutorials for Amazon Web Services (AWS) products, services, and features. It is a one-stop shop for all AWS knowledge and learning materials that is both extensive and constantly updated, ensuring that the material is always up-to-date.

The simplest method to ensure the information you are reading is up-to-date is to check the date of the documentation page you are viewing. AWS updates the Documentation frequently to keep up with the latest AWS services, functions, and features. The most up-to-date and accurate information will be available to you by looking at the dates on the AWS documentation page. Additionally, checking for updates on the official AWS blog or social media accounts can also help keep up-to-date with the latest AWS information.

To learn more about AWS Documentation: https://brainly.com/question/30185667

#SPJ11

you are at a customer's home, and you are asking the customer whether the problem is intermittent or constant. which steps are you using from the six-step troubleshooting process?

Answers

Asking the customer whether the problem is intermittent or constant is part of the first step in the six-step troubleshooting process, which is to identify the problem.

The six steps of the troubleshooting process are:

Identify the problem: This step involves gathering information about the problem, such as its symptoms and when it occurs, in order to better understand and define the problem.

Establish a theory of probable cause: Based on the information gathered in step 1, this step involves developing a theory or hypothesis about the most likely cause of the problem.

Test the theory: In this step, the theory developed in step 2 is tested to determine whether it is correct.

Establish a plan of action and implement the solution: Based on the results of the testing in step 3, a plan of action is developed to implement the solution to the problem.

Verify full system functionality: Once the solution has been implemented, the system is tested to ensure that the problem has been resolved and that the system is functioning correctly.

Document the findings, actions, and outcomes: This step involves documenting the problem, the steps taken to troubleshoot and solve it, and the final outcome.

Therefore, asking the customer whether the problem is intermittent or constant falls under the first step of identifying the problem, which is a crucial step in the troubleshooting process as it helps to define the scope and nature of the problem.

Learn more about troubleshooting here brainly.com/question/30048504

#SPJ4

Which of the following terms describes the software layer that is responsible for creating and running a VM on a host?
a. Intel VT b. Virtual machine c. Virtual hard disks d. Physical machine e. Hypervisor

Answers

Answer:

b

Explanation:

The term that describes the software layer that is responsible for creating and running a virtual machine (VM) on a host is (e) "Hypervisor".

A hypervisor, also known as a virtual machine monitor (VMM), is a layer of software that runs directly on the host machine's hardware and manages the creation, operation, and sharing of virtual machines. The hypervisor provides a virtualized environment that allows multiple guest operating systems to run on the same physical host, each with its own set of virtual hardware resources.

The hypervisor also provides mechanisms for managing the allocation and sharing of physical resources, such as CPU, memory, and storage, among the virtual machines.

The correct answer is e. Hypervisor.

You can learn more about virtual machine (VM) at

https://brainly.com/question/30464169

#SPJ11

when using an aggregate function in the select statement, what is the order of execution of the clauses?

Answers

The order of execution of the clauses when using an aggregate function in the select statement is FROM, WHERE, GROUP BY, HAVING, and SELECT.

FROM: The FROM clause defines which tables are used for the query and how those tables are related.

WHERE: The WHERE clause allows you to specify conditions for retrieving data from the tables.

GROUP BY: The GROUP BY clause groups the results of the query into subsets that have common values for the specified expressions.

HAVING: The HAVING clause allows you to specify conditions that must be met by the groups of data.

SELECT: The SELECT clause determines which columns are retrieved in the result set and how they are presented. This is where the aggregate functions are used.
Therefore, the order of execution of the clauses when using an aggregate function in the select statement is FROM, WHERE, GROUP BY, HAVING, and SELECT.

You can learn more about aggregate function at: brainly.com/question/29642356

#SPJ11

A noun in a business rule translates to a(n) _____ in the data model.a. entity b. attributec. relationship d. constraint

Answers

A noun in a business rule translates to a(n) a. entity in the data model.

In a business rule, a noun typically refers to a real-world entity or object, such as a customer, product, or order. In the data model, these real-world entities are represented as entities or entity types, which are the primary building blocks of the model.

An entity represents a distinct type of object or concept in the real world, such as a person, place, or thing. Each entity has attributes that describe its properties or characteristics, such as name, address, or date of birth.

Therefore, in the data model, a noun will be translated in order of business rule as an entity.

Learn more about entity here:

brainly.com/question/15073974

#SPJ11

help i dont know answer

Answers

Answer:

Selenium - Web browser automation tool

JMeter - Load testing tool

QTP - Functional testing tool

Quality Center - test management tool

Bugzilla - Defect - Tracking tool

Explanation:

you are installing a 1.5 tb hard drive in a computer. what two methods could you use to partition the hard drive?

Answers

There are several methods to partition a hard drive, but two common methods that could be used to partition a 1.5 TB hard drive are:

Disk Management UtilityThird-Party Partitioning Tool

How do one  partition the hard drive?

Disk Management Utility: The Disk Management Utility is a built-in tool in Windows that can be used to partition a hard drive. To use this method, you can follow these steps:

Open the Disk Management Utility by pressing the Windows key + X and selecting "Disk Management".In the Disk Management window, locate the 1.5 TB hard drive, right-click it, and select "Shrink Volume".Enter the amount of space you want to shrink in MB (1 GB = 1024 MB), and click "Shrink".You will see the unallocated space that you have created. Right-click on it and select "New Simple Volume".Follow the on-screen instructions to set up the partition.

Lastly, in Third-Party Partitioning Tool: There are many third-party partitioning tools available, such as EaseUS Partition Master, MiniTool Partition Wizard, and Paragon Partition Manager. To use this method, you can follow these steps:

Download and install a partitioning tool of your choice.Open the partitioning tool and locate the 1.5 TB hard drive.Use the tool's interface to create a new partition by specifying the size of the partition, the drive letter, and the file system.Follow the on-screen instructions to complete the process.

Learn more about hard drive from

https://brainly.com/question/29608399

#SPJ1

Other Questions
The diameter of a softball is 3.8 inches. Estimate the volume within the softball. Round answers to the nearestwhole number and leave in the answer.a. Volume: 73b. Volume: 14c. Volume: 9d. Volume: 58 please help with these 2 questions in math In the 1950s American dream what parents were now having large families again should offenders be fined on the basis of the seriousness of what they did or in terms of their ability to pay? jose consulting paid $960 cash for utilities for the current month. determine the general journal entry that jose consulting will make to record this transaction. A local doctor wants to test the effects of a new diet she decided to lower triglycerides on 10 randomly selected patients. The triglyceride level of each patient is checked twice, once before they start the diet, and again at three weeks after that time. The results are in the table below, (the photo). All data is in milligrams per deciliter (mg/dL).The Noel and alternative hypothesis for the study are (in the photo) Please let me know which one of the answers in the photo is correct ! Thank you , 100 points!! palladium crystallizes in a face-centered cubic unit cell. its density is 12.0 g / cm3 at 27oc. calculate the atomic radius of pd. September 8 purchase from Mehta brother as per invoice number 174 120 words on rupees 30000 computer from office from hurry technology when we first meet the knight, he has never been in battle. what is interesting about his armor? Compared to the velocity of an earthquakes S-wave, the velocity of the P-wave in the same material is Do: How many grams are in 2.5 x 1025 CO molecules? Why is the letter C pronounced as ayn in Arabic? what is the purpose of a cnc machining center? machining centers enable a single machine to tolinmg u information is typically coded in working memory in form? acustic semantic procedural visual 11) m/EFG=132, m/CFG=x+111,and m/EFC=x+23. Find mLEFC. one of the primary things media writing demands of you is . a. accuracy b. education c. entertainment d. autonomy Someone please help created a strategy for addressing complaints formulated a statement explaining the fair relationship between the colonies and Britain established the Committees of Observation to enforce boycott of British goodsThe actions above were all performed by A. the Sons of Liberty. B. the Committees of Correspondence. C. the Second Continental Congress. D. the First Continental Congress. which behavior of the nurse indicates that the nurse has a therapeutic relationship with the client? DUE TOMORROW PLEASE HELP AND DONT TRY TO ANSWER WRONG TO GET POINTS PLEASE!!!!!!!!!!!!!!!At a certain time, the end of the minute hand of the clock below centered at (0, 0) has coordinates approximately (7.5, 7.5). How long is the minute hand of the clock if each grid square is one inch by one inch? Explain your reasoning PLEASE HELP MARKING BRAINLEIST JUST ANSWER ASAP