The resistance of the wire is 3.8 × 10⁻² Ω.
option B.
What is the resistance of the wire?The resistance of the wire is calculated as follows;
R = ρL/A
Where;
R is the resistanceρ is the resistivity of copperL is the length of the wireA is the cross-sectional area of the wireThe resistivity of copper at 20°C = 1.77 x 10⁻⁸ Ω·m.
The resistance of the wire is calculated as;
R = (1.77 x 10⁻⁸ Ω·m) x (6.50 m) / (3.0 x 10⁻⁶ m²)
R = 3.8 × 10⁻² Ω
Learn more about resistance here: https://brainly.com/question/17563681
#SPJ1
water is flowing in a circular pipe varying cross-sectional area, and at all points the water completely fills the pipe. for related problemsolving tips and strategies, you may want to view a video tutor solution of flow of an incompressible fluid.
water is flowing in a circular pipe varying cross-sectional area, and at all points the water completely fills the pipe.
some general tips and strategies for problem-solving related to the flow of an incompressible fluid in a circular pipe:
Understand the problem statement: Make sure you understand the given conditions and what is being asked for. Draw a diagram if necessary.
Apply the continuity equation: In an incompressible fluid, the mass flow rate must remain constant throughout the pipe. The continuity equation is given by: A1V1 = A2V2, where A1 and A2 are the cross-sectional areas of the pipe at two different points and V1 and V2 are the corresponding fluid velocities.
Apply Bernoulli's equation: Bernoulli's equation relates the pressure, velocity, and elevation of a fluid in steady, non-viscous flow. It is given by: P1 + (1/2)ρV1^2 + ρgh1 = P2 + (1/2)ρV2^2 + ρgh2, where P1 and P2 are the pressures at two different points, V1 and V2 are the corresponding velocities, h1 and h2 are the elevations, and ρ is the density of the fluid.
Determine the type of flow: Depending on the fluid velocity and the pipe diameter, the flow can be laminar or turbulent. For laminar flow, the Reynolds number (Re) is less than 2300, and for turbulent flow, Re is greater than 4000. For values of Re between these two limits, the flow is transitional.
Use the Darcy-Weisbach equation: The Darcy-Weisbach equation is used to calculate the pressure drop due to frictional losses in a pipe. It is given by: ΔP = f (L/D) (ρV^2/2), where ΔP is the pressure drop, L is the length of the pipe, D is the diameter of the pipe, V is the fluid velocity, ρ is the density of the fluid, and f is the friction factor.
To know more about Bernoulli's equation
brainly.com/question/30504672
#SPJ11
Answer the following questions about the Earth in Space. Type your answer below each question and change the text color (blue). Answer the questions in 2-3 sentences.
Describe the distance of the earth from the sun
Illustrate the size and shape of the earth.
What happens as the earth revolves around the sun?
Why do we have leap years?
How does the earth’s motion affect seasons on earth?
The Earth orbits the sun at a distance of around 93 million miles (149.6 million kilometers). This is known as an astronomical unit (AU).
What is the shape of the Earth?With a diameter of 12,742 kilometers (7,918 miles), the Earth is basically spherical. It has a bulge near the equator and a slight flattening at the poles.
Seasons change as the Earth rotates around the Sun due to its leaning position of 23.5-degree axial tilt. Summer occurs when the sun is facing the hemisphere, while winter happens in the other hemisphere.
Leap years are added to the calendar to account for the extra quarter of a day that it takes the Earth to orbit around the Sun. Without leap years, our calendars would fall out of sync with the seasons.
The Earth's motion affects the seasons on Earth due to the axial tilt mentioned earlier. The hemisphere tilted towards the Sun experiences more direct sunlight, causing it to be warmer and experience summer, while the hemisphere tilted away experiences less direct sunlight and cooler temperatures, causing winter.
Find out more on Earth in Space here: https://brainly.com/question/23989443
#SPJ1
a bullet of mass mb is fired horizontally with speed vi at a wooden block of mass mw resting on a frictionless table. the bullet hits the block and becomes completely embedded within it. after the bullet has come to rest relative to the block, the block, with the bullet in it, is traveling at speed vf
When the bullet of mass mb is fired horizontally with speed vi, it possesses a certain amount of kinetic energy. Upon hitting the wooden block of mass mw, some of this kinetic energy is transferred to the block, causing it to move.
As the bullet becomes completely embedded within the block, it also transfers its momentum to the block, leading to an increase in its velocity.
The final velocity of the block with the embedded bullet, vf, can be calculated using the law of conservation of momentum, which states that the total momentum of the system remains constant unless acted upon by an external force.
In this case, the momentum of the bullet and block before the collision is equal to the momentum of the block with the embedded bullet after the collision.
Hence, we can say that the increase in velocity of the block is due to the transfer of momentum and kinetic energy from the bullet to the block. The absence of friction ensures that the kinetic energy is conserved and not lost to the surroundings in the form of heat or sound.
To know more about kinetic energy refere here:
https://brainly.com/question/26472013#
#SPJ11
a stock person at the local grocery store has a job consisting of the following five segments:(1) picking up boxes of tomatoes from the stockroom floor(2) accelerating to a comfortable speed(3) carrying the boxes to the tomato display at constant speed(4) decelerating to a stop(5) lowering the boxes slowly to the floor.during which of the five segments of the job does the stock person do positive work on the boxes?a stock person at the local grocery store has a job consisting of the following five segments:(1) picking up boxes of tomatoes from the stockroom floor(2) accelerating to a comfortable speed(3) carrying the boxes to the tomato display at constant speed(4) decelerating to a stop(5) lowering the boxes slowly to the floor.during which of the five segments of the job does the stock person do positive work on the boxes?(1) and (5)(2) and (3)(1) and (2)(1) only(1), (2), (4), and (5)
The stock person at the grocery store does positive work on the boxes of tomatoes during segments (1) and (5) of their job.
When the stock person picks up the boxes from the stockroom floor, they lift the boxes against the force of gravity, which requires them to do positive work on the boxes.
Similarly, when the stock person lowers the boxes slowly to the floor, they are lowering the boxes with control and against the force of gravity, which again requires them to do positive work on the boxes.
The other segments of the job, accelerating to a comfortable speed, carrying the boxes at a constant speed, and decelerating to a stop, do not involve doing positive work on the boxes.
Instead, these segments involve the stock person using force to move the boxes without changing their potential energy, which is a measure of the work done on an object due to its position or configuration.
To know more about gravity refer here:
https://brainly.com/question/31321801#
#SPJ11
What is the wavelength of a 2.50-kilohertz sound wave traveling at 326 meters per second through air?
A: 0.130 m
B: 1.30 m
C: 7.67 m
D: 130 m
The wavelength of the 2.50-kilohertz sound wave traveling at 326 meters per second through air is approximately 0.130 meters.
The required formula is:
Wavelength = Speed of sound / Frequency
We need to convert the frequency to Hz, so we multiply by 1000:
Wavelength = 326 m/s / 2500 Hz = 0.1304 meters
Rounding to three significant figures, the answer is: 0.130 m
To learn more about frequency, click here:
https://brainly.com/question/5102661
#SPJ4
How are Kirkwood's gaps in the asteroid belt similar to Cassini's division in Saturn's rings?
Kirkwood's gaps in the asteroid belt are regions where there are fewer asteroids than expected, due to the gravitational influence of Jupiter. Similarly, Cassini's division in Saturn's rings is a region where there are fewer particles due to the gravitational influence of Saturn's moon, Mimas.
Both phenomena are caused by the gravitational forces of nearby celestial bodies creating zones of low density. The similarities between Kirkwood's gaps in the asteroid belt and Cassini's division in Saturn's rings. Kirkwood's gaps and Cassini's division are regions where the distribution of objects is significantly reduced. They occur due to gravitational resonances with a massive nearby object, such as a planet.
1. Kirkwood's gaps are found in the asteroid belt between Mars and Jupiter. These gaps are areas where there are fewer asteroids. The gaps occur because the asteroids in these regions have an orbital resonance with Jupiter, meaning their orbital periods are simple fractions of Jupiter's orbital period. Due to this resonance, the gravitational interaction with Jupiter repeatedly perturbs the asteroids, eventually ejecting them from those regions or altering their orbits.
2. Cassini's division, on the other hand, is a prominent gap in Saturn's rings. This gap is formed due to the gravitational resonance between the ring particles and Saturn's moon, Mimas. The particles within the gap have an orbital period that is half the orbital period of Mimas. This resonance leads to a regular gravitational tug from Mimas, which prevents the particles from remaining in the gap, thus maintaining its emptiness.
In summary, both Kirkwood's gaps and Cassini's division represent areas where the distribution of objects is reduced due to gravitational resonances with nearby massive objects (Jupiter and Mimas, respectively). These resonances perturb the objects in the gaps, causing them to either be ejected or change their orbits, resulting in the observed gaps.
Learn more about the moon here:- brainly.com/question/13538936.
#SPJ11
in the circuits shown, the brightness of the bulbs is observed to compare as follows: a is the brightest, and b and c are equally bright and dimmer than a (a>b=c)
In the given circuit, bulb A is the brightest, while bulbs B and C have equal brightness that is dimmer than A (A > B = C).
This observation indicates that bulb A has the highest current passing through it, while bulbs B and C share a lower current equally. This could be due to bulb A being part of a parallel circuit branch, while bulbs B and C are connected in series in another branch.
In parallel circuits, the voltage across each bulb is the same, leading to higher brightness, whereas in series connections, the voltage divides across the bulbs, resulting in lower brightness. However, because they have a lower resistance than bulb a, they are both dimmer than bulb a.
Bulbs b and c have equal resistance, which means they share the same amount of current and are therefore equally bright.
Thus, we can conclude that bulb a has a higher resistance than bulbs b and c.
To know more about parallel circuits click here:
https://brainly.com/question/11409042
#SPJ11
Bulb A is brighter than B or C because the current is greater through A than B or C.
Bulb A is brighter than B or C because the circuit containing bulb A has overall less resistance.
Bulb A is brighter than B or C because bulb B and C get only half the current from the batter, while A get all of it.
Why is bulb A brighter than B or C?The current flowing through the circuits is directly proportional to the potential difference across the circuit.
I = V/R
where;
V is the voltageR is the resistanceFrom the circuit diagram, bulb A is connected to one battery while bulb B and C are connect to one batter as well.
Also bulb B and C are connect in series, so both bulbs (B and C) share the current delivered by the one battery equally.
The current received by each bulb B and C is calculated as;
I(B) + I(C) = V/R = I
I(B) = I(C) = I/2
I/2 + I/2 = I
where;
I/2 is each current flowing in bulb B and C.V is the voltage delivered by the one batteryThe bulb A on the other hand, gets all the current delivered by the one battery, and hence shines the brightest.
Learn more about bulbs in series here: https://brainly.com/question/19865219
#SPJ4
A proton traveling at 3. 60m/s suddenly enters a uniform magnetic field 0. 750 T, traveling at an angle of 55 degrees.
a) Find the magnitude and direction of the force this magnetic field exerts on the proton.
b) If you can vary the direction of the proton's velocity, find the magnitude of the maximum and minimum forces you could achieve, and show how the velocity should be oriented to achieve these forces.
c)What would the answers to part (a) be if the proton were replaced by an electron traveling in the same way as the proton?
(A).The direction of the magnetic field, the direction your palm faces will be the direction of the force on proton which is 3.33 × 10⁻¹⁹N. (B)The magnitude of the maximum and minimum forces, 4.3254 × 10⁻¹⁹N & zero resp. (C)The direction of the force would be opposite, since the charge of an electron is negative i.e. -4.3254 × 10⁻¹⁹N.
(A) To find the magnitude of the force, we can use the formula for the magnetic force on a moving charged particle in a magnetic field, which is given by:
F = qvBsin(θ)
where:
F is the magnetic force
q is the charge of the particle (in this case, the charge of a proton is +e, where e is the elementary charge)
v is the velocity of the particle
B is the magnetic field
θ is the angle between the velocity of the particle and the direction of the magnetic field
Plugging in the given values:
q = +e = +1.602 × 10⁻¹⁹C (charge of a proton)
v = 3.60 m/s (velocity of the proton)
B = 0.750 T (magnetic field)
θ = 55 degrees (angle between velocity and magnetic field)
We can convert the angle to radians by using the formula:
θrad = θ (π/180)
θrad = 55 (π/180) = 0.95993 radians
Now, can substitute the values into the formula to calculate the magnitude of the force:
F = (1.602 × 10⁻¹⁹C) × (3.60 m/s) × (0.750 T)× sin(0.95993 radians)
F ≈ 3.33 × 10⁻¹⁹ N
(B) The maximum and minimum forces can be achieved when the velocity of the proton is oriented perpendicular (90° ) and parallel (0°) to the direction of the magnetic field, respectively.
Maximum force (Fmax):
If the velocity of the proton is perpendicular to the direction of the magnetic field, the angle theta between the velocity and the magnetic field is 90°.In this case, sin(90° ) = 1, so the formula for the force becomes:
Fmax = q (v × B)
Fmax = (+1.602 × 10⁻¹⁹C )×(3.60 m/s) ×(0.750 T) = 4.3254 × 10⁻¹⁹N
Minimum force (Fmin): If the velocity of the proton is parallel to the direction of the magnetic field, the angle theta between the velocity and the magnetic field is 0 degrees. In this case, sin(0°) = 0, so the force becomes:
Fmin = 0
(C) For an electron, the charge (q) is -e, where e is the elementary charge, equal to 1.602 × 10⁻¹⁹C . The formula for the force remains the same:
F = q (v ×B×sinθ)
F = (-1.602 × 10⁻¹⁹C ) × (3.60 m/s) × (0.750 T) ×sin(55°)
F = -4.3254 × 10⁻¹⁹N
So the magnitude of the force exerted on an electron would be the same as that on a proton, but the direction of the force would be opposite, since the charge of an electron is negative.
To know more about proton
https://brainly.com/question/31431854
#SPJ1
Natural barriers such as trees and hills, and man-made barriers such as walls, can minimize electric fields, but magnetic fields cannot be shielded. To reduce exposure, consumers should do which of the following?
a.Avoiding sleeping near electrical appliances
b.Choose laptops over PCs
c.Clean gutters and drains
d.Convert to gas heat
To reduce exposure to electric and magnetic fields, it is advisable to a.Avoiding sleeping near electrical appliances, as they are common sources of these fields. This will help minimize your exposure and promote a healthier living environment.
To address your question, it is important to understand the difference between electric fields and magnetic fields. Electric fields are produced by electric charges, whereas magnetic fields are produced by the motion of these electric charges. Natural barriers like trees and hills, as well as man-made barriers like walls, can minimize electric fields but are less effective against magnetic fields.
To reduce exposure to these fields, consumers should focus on the sources that produce them. The best option among the given choices is:
a. Avoiding sleeping near electrical appliances
This is because electrical appliances generate both electric and magnetic fields when they are in operation. By keeping a distance from them, especially during sleep, you can minimize your exposure to these fields.
While choosing laptops over PCs (option b) might seem like a good idea, it is not the most effective way to reduce exposure to electric and magnetic fields. Laptops still produce these fields, albeit at lower levels than PCs. Additionally, options c (clean gutters and drains) and d (convert to gas heat) do not directly relate to minimizing exposure to electric and magnetic fields.
To learn more about magnetic fields, refer:-
https://brainly.com/question/23096032
#SPJ11
A beam of light has a wavelength of 4.5 x 10^−7 meter in a vacuum. The frequency of this light is
A: 1.5 × 10^-15 s
B: 4.5 × 10^-7 s
C: 1.4 × 10^2 s
D: 6.7 × 10^14 s
The frequency of this light is 6.7 × 10¹⁴ s. The correct option is D.
The frequency of a beam of light is given by the equation f = c/λ, where c is the speed of light and λ is the wavelength of the light. In a vacuum, the speed of light is a constant value of 3.00 × 10⁸ m/s.
Using the given wavelength of 4.5 x 10⁻⁷ meter, we can plug it into the equation to find the frequency:
f = c/λ
f = 3.00 × 10⁸ m/s / 4.5 x 10⁻⁷ meter
f = 6.7 × 10¹⁴ s⁻¹
Therefore, the frequency of the light is 6.7 × 10¹⁴ s⁻¹ or option D.
To know more about frequency visit:-
https://brainly.com/question/30611426
#SPJ11
Find the center of mass of the following plane region with variable density. Describe the distribution of mass in the region. х R= {(x,y): 0 sxs4, 0 sys5}; p(x,y) = 1 + ê The center of mass is (Type an ordered pair, using integers or fractions.) Describe the distribution of mass in the region. Choose the correct answer below. A. Density increases from top to bottom. B. Density increases from bottom to top. C. Density increases to the left. D. Density increases to the right.
The center of mass of the given plane region with variable density can be found by integrating the product of the density function, p(x,y), and the position coordinates, (x,y), over the region R and then dividing by the total mass of the region. The density function is given as p(x,y) = 1 + ê, where ê represents the exponential function. The correct answer is D. Density increases to the right.
To find the center of mass, we need to calculate the following integrals:
Integrate p(x,y) * x over the region R and then divide by the total mass.
Integrate p(x,y) * y over the region R and then divide by the total mass.
The result of these integrals will give us the x-coordinate and y-coordinate of the center of mass, respectively. The distribution of mass in the region depends on the density function p(x,y) = 1 + ê.
Since ê is an exponential function, the density of the region will increase as we move away from the origin (0,0) towards the positive x-direction and positive y-direction.
To know more about center of mass refer here:
https://brainly.com/question/28996108#
#SPJ11
a step-down transformer is used for recharging the batteries of portable devices such as tape players. the turns ratio inside the transformer is 13:1 and is used with 120-v (rms) household service. if a particular tape player draws 0.35 a from the house outlet, what are (a) the voltage and (b) the current supplied from the transformer? (c) how much power is delivered?
A merry-go-round is rotating at constant angular speed. two children are riding the merry-go-round: ana is riding at point a and bobby is riding at point b. 1. which child moves with greater magnitude of linear velocity? a. ana has the greater magnitude of linear velocity. b. bobby has the greater magnitude of linear velocity. c. both ana and bobby
In a merry-go-round rotating at constant angular speed, two children Ana and Bobby are riding at different points A and B, respectively.
The linear velocity of a point on a rotating object depends on its distance from the center of rotation and the angular velocity of the object. The farther a point is from the center of rotation, the greater its linear velocity.
Therefore, the child riding at the outermost point, which is Bobby in this case, will have a greater magnitude of linear velocity compared to the child riding at the innermost point, which is Ana.
Thus, option (b) is correct - Bobby has the greater magnitude of linear velocity. This concept is important in understanding centripetal force and its effects on objects in circular motion.
To know more about the angular speed refer here :
https://brainly.com/question/31642620#
#SPJ11
Two forces of equal magnitude act to 60°.If their resultant had a magnitude 30N,find the magnitude of the equal force
The magnitude of the equal force is 21.2 N.
Equal force refers to two forces that have the same magnitude but act in opposite directions. They cancel each other out, resulting in a net force of zero.
Let's call the magnitude of the equal force "F".
We know that the two forces have equal magnitude, so we can represent them as F and F.
We also know that the angle between them is 60°.
To find the magnitude of the resultant, we can use the law of cosines:
resultant^2 = F^2 + F^2 + 2(F)(F)cos(60°)
30^2 = 2F^2 + 2(F^2)(0.5)
900 = 2F^2
F^2 = 450
F = √450 ≈ 21.2 N
Therefore, The equal force has a magnitude of about 21.2 N.
To learn more about Newton's law of motion click:
brainly.com/question/29775827
#SPJ1
uestion 13 compared to red light, blue light has lower frequencies longer wavelengths higher energy photons none of the above
Compared to red light, blue light has higher energy photons. This is because the energy of a photon is directly proportional to its frequency, and blue light has a higher frequency than red light.
Additionally, blue light has shorter wavelengths than red light. This is because wavelength and frequency are inversely proportional, meaning that as frequency increases, wavelength decreases. Blue light also has higher frequencies than red light, which means it oscillates more rapidly and has more energy per photon. This is why blue light is often associated with being more "energetic" than red light. The energy of photons in different parts of the electromagnetic spectrum can have important effects in a variety of fields, from medicine to environmental science to astronomy.For more such question on energy photons
https://brainly.com/question/30130156
#SPJ11
Light is a form of ________ radiation.
A) gamma
B) electromagnetic
C) infrared
D) UV
E) X-ray
Light is a form of B) electromagnetic radiation. The different wavelengths of electromagnetic radiation determine their properties, such as their ability to penetrate different materials or interact with different types of matter.
Light is a form of electromagnetic radiation. Electromagnetic radiation is a type of energy that travels through space and includes a wide range of wavelengths, including radio waves, microwaves, infrared radiation, visible light, ultraviolet radiation, X-rays, and gamma rays
Visible light is the range of electromagnetic radiation that can be detected by the human eye and includes the colors of the rainbow.
To know more about electromagnetic radiation visit:-
https://brainly.com/question/10759891
#SPJ11
A skateboarder, with an initial speed of 2.1 m/s, rolls virtually friction free down a straight incline of length 20 m in 3.2 s. At what angle is the incline oriented above the horizontal?
The incline is oriented at an angle of approximately 10.8° above the horizontal.
We can use the equations of kinematics to determine the angle of the incline. The skateboarder is under the influence of gravity and has an initial velocity, so we can use the following equation to solve for the angle:[tex]d = v0t + 0.5at^{2sinθ}[/tex]where [tex]d = 20 m, v0 = 2.1 m/s, t = 3.2 s, a = 9.81 m/s^2[/tex] (acceleration due to gravity), and θ is the angle of the incline above the horizontal.Rearranging the equation, we get:[tex]sinθ = (2d - v0t^2)/2at^2[/tex]Substituting the given values, we get:[tex]sinθ = (2(20 m) - (2.1 m/s)(3.2 s)^2)/(2)(9.81 m/s^2)(3.2 s)^2[/tex]Simplifying, we get:sinθ = 0.188Taking the inverse sine of both sides, we get:θ = 10.8°Therefore, the incline is oriented at an angle of approximately 10.8° above the horizontal.For more such question on angle of incidence
https://brainly.com/question/30402542
#SPJ11
A force of 540 N is used to stop a car with a mass of 65 kg moving 175 m/s. How long will it take to bring the object to a complete stop?
it would take about 21.0 seconds to bring the car to a complete stop with a force of 540 N, assuming no external factors such as air resistance or friction.
Newton's second law of motion states that the acceleration of an object is directly proportional to the force applied to it and inversely proportional to its mass. It can be expressed mathematically as F = ma, where F is the net force acting on the object, m is the mass of the object, and a is its acceleration.
We can use the equation for acceleration to solve this problem. The equation is:
a = F/m
where a is the acceleration of the car, F is the force applied to the car, and m is the mass of the car.
Using the given values, we get:
a = 540 N / 65 kg = 8.31 m/s^2
This is the acceleration of the car when the force is applied.
To find the time it takes to bring the car to a complete stop, we can use the kinematic equation:
v = v0 + at
where v is the final velocity of the car (which is zero when it comes to a complete stop), v0 is the initial velocity of the car (175 m/s in this case), a is the acceleration, and t is the time it takes for the car to come to a complete stop.
Substituting the known values, we get:
0 = 175 m/s + (8.31 m/s^2) t
Solving for t, we get:
t = -175 m/s / (8.31 m/s^2) ≈ -21.0 s
The negative sign indicates that the time is in the opposite direction of the car's motion. We know that time cannot be negative, so we discard this solution.
So, it takes approximately:
t = 175 m/s / (8.31 m/s^2) ≈ 21.0 s
to bring the car to a complete stop.
Hence, If there were no outside influences, such as air resistance or friction, the car would come to a complete stop with a force of 540 N in around 21.0 seconds.
To learn more about Newton's law of motion click:
brainly.com/question/29775827
#SPJ1
4. Scenario: A car runs into a truck.
a. Identify two objects that are interacting (colliding) in this scenario)
One object is...
The other object is...
b. Identify the action and the reaction forces.
One object is a car and the other object is a truck. The action will be from the car while the reaction will be from the truck.
What happens when the objects collide?When the objects collide then one will be acting on the other while the receiver of the force reacts to it. After a collision, Newton's third law of motion comes into play.
At this time, the second body, the truck will exert a force that is the same in magnitude and opposite in the direction of the car which initiated the action. From this law of motion, we can deduce the actor and reactor.
Learn more about collisions here:
https://brainly.com/question/24915434
#SPJ1
A building has a flat roof of area
42.0 m2. Wind blows over the top of
the roof at 14.8 m/s. The air inside
the building is stationary. What is
the TOTAL force acting on the roof?
[?] N
The TOTAL force acting on the roof is 5,947.6 N.
What is the total force acting on the roof?
The pressure difference between inside and outside building is calculated as;
ΔP = ¹/₂ρv²
where;
ρ is the density of airv is the speed of the airΔP = ¹/₂ x 1.293 x 14.8²
ΔP = 141.6 Pa
The TOTAL force acting on the roof is calculated from the product of the pressure difference and area.
F = ΔP x A
F = 141.6 x 42
F = 5,947.6 N
Learn more about force here: https://brainly.com/question/12970081
#SPJ1
A 3.1-kg box is sliding along a frictionless horizontal surface with a speed of 1.8 m/s when it encounters a spring. (a) Determine the force constant of the spring, if the box compresses the spring 5.3 cm before coming to rest. N/m (b) Determine the initial speed the box would need in order to compress the spring by 1.6 cm. m/s
(a) The force constant of the spring, if the box compresses the spring 5.3 cm before coming to rest is 1020 N/m.
(b) The initial speed required to compress the spring by 1.6 cm is 0.68 m/s.
(a) To determine the force constant of the spring, we can use the conservation of mechanical energy, assuming that there is no energy lost due to friction or other dissipative forces. At the moment when the box comes to rest, all of its kinetic energy will have been transferred to the spring, causing it to compress. We can write:
[tex](1/2)mv^2 = (1/2)kx^2[/tex]
where m is the mass of the box, v is its initial speed, x is the distance that the spring compresses, and k is the force constant of the spring.
Substituting the given values, we get:
[tex](1/2)(3.1 kg)(1.8 m/s)^2 = (1/2)k(0.053 m)^2[/tex]
Solving for k, we get:
[tex]k = (0.5)(3.1 kg)(1.8 m/s)^2 / (0.053 m)^2 = 1020 N/m[/tex]
Therefore, the force constant of the spring is 1020 N/m.
(b) To determine the initial speed required to compress the spring by 1.6 cm, we can use the same equation as above, but with the new value of x:
[tex](1/2)mv^2 = (1/2)kx^2[/tex]
Substituting the given values, we get:
[tex](1/2)(3.1 kg)v^2 = (1/2)(1020 N/m)(0.016 m)^2[/tex]
Solving for v, we get:
v = [tex]\sqrt{[(1020 N/m)(0.016 m)^2 / 3.1 kg[/tex]] = 0.68 m/s
Therefore, the initial speed required to compress the spring by 1.6 cm is 0.68 m/s.
For more such questions on Spring.
https://brainly.com/question/20368777#
#SPJ11
How long does it take a radio signal from Earth to reach the Moon, which has an orbital radius of approximately 3.84 x10^8 m?
The time it takes for a radio signal to travel from Earth to the Moon depends on various factors such as the distance between the two celestial bodies, the speed of the radio signal, and the interference along the way. Since the Moon has an orbital radius of approximately 3.84 x 10^8 m.
The speed of a radio signal in a vacuum is approximately 299,792,458 m/s. If we assume that the Moon is at its closest point to the Earth, which is about 363,104 km, it would take a radio signal of approximately 1.28 seconds to travel from Earth to the Moon. On the other hand, if the Moon is at its farthest point from the Earth, which is about 405,696 km, it would take approximately 1.42 seconds for a radio signal to travel from Earth to the Moon.
However, it is essential to note that the time taken for a radio signal to travel from Earth to the Moon can vary depending on several factors such as the strength of the signal and the interference along the way. In general, the radio signal takes around 1.28 to 1.42 seconds to reach the Moon from Earth, depending on the distance between the two celestial bodies.
Learn more about celestial bodies here:
https://brainly.com/question/28876984
#SPJ11
Why are force fields necessary to describe electric force?
A. Electric force is a form of gravity.
B. Electric force acts at a distance.
C. Electric force attracts two poles.
D. Electric force can only attract objects.
When describing electric force, force fields are required since electric force is a kind of gravity. Option A is Correct.
A force field is a means to visualise the interactions between electric charges in physics. It is more accurate to remark that a positive (+) charge generates a force "field" in the area surrounding it rather than referring to the force it exerts on an electron.
The physical field that surrounds electrically charged particles and exerts force on all other charged particles in the field, either attracting or repelling them, is known as an electric field (or E-field). It can also refer to a system of charged particles' physical field. Option A is Correct.
Learn more about electric force visit: brainly.com/question/30236242
#SPJ4
(7%) Problem 5: Suppose you wanted to increase the force between two point charges by a factor of 8. * By what factor must you change the distance between them? ded; = V(8) Grade Summary Deductions 390 Potential 97% tan() HOME sin) cos) cotan asino acos atan) acotan sinh cosh tanh0 cotanh() Degrees Radians 7 8 9 Eq^^|| 4 5 6 * 1 2 3 Submissions Attempts remaining: 96 (1% per attempt) detailed view 1% 0 END VO BACKSPACE DEL CLEAR Submit Hint Feedback I give up! Hints: 4% deduction per hint. Hints remaining: 2 Feedback: 5% deduction per feedback
To obtain this force improvement, you would therefore need to move the charges closer by a ratio of roughly 2.83.
A situation is given to you where you must eight-fold the force between two point charges. You must calculate how much the space between the charges must alter in order to do this.
Coulomb's law, which states that the force between two point charges is inversely proportional to the square of their distance, can be used to address this issue.
The distance between the charges will therefore decrease by a factor of the square root of 8, or around 2.83, if the force is increased by a factor of 8. To obtain this efficiency improvement, you would therefore need to move the charges closer by a ratio of roughly 2.83.
Learn more about force:
https://brainly.com/question/26115859
#SPJ4
The four forces acting on an airplane in flight are
A.
weight, thrust, power, and drag.
B.
pitch, roll, yaw, and thrust.
C.
thrust, drag, weight (gravity), and lift.
Answer:
C. thrust, drag, weight, and lift.
Explanation:
1. Thrust- It is the force generated by the engine of an airplane for forward motion.
2. Drag- It is the resistance force faced by an airplane as it moves through the air.
3. Weight- It is the gravitational pull of the earth on an airplane.
4. Lift- It is the force generated by the wings of the plane as it moves through the air.
More explanation of forces on an airplane:
brainly.in/question/21730484
a person standing on a building ledge throws a ball vertically from a launch position 47 m above the ground. it takes 2.0 s for the ball to hit the ground. for the steps and strategies involved in solving a similar problem, you may view the following worked example 3.6 video: select to launch worked example 3.6 video part a with what initial speed was the ball thrown? express your answer with the appropriate units. enter a positive value if the initial speed is upward and a negative value if the initial speed is downward. activate to select the appropriates template from the following choices. operate up and down arrow for selection and press enter to choose the input value typeactivate to select the appropriates symbol from the following choices. operate up and down arrow for selection and press enter to choose the input value type v
The initial speed with which the ball was thrown is 21.7 m/s.
What is the initial speed of the ball thrown?The initial speed of ball thrown is 21.7 m/s.
To solve this problem, we can use the kinematic equation for free fall:
[tex]y = v_it + 1/2g*t^2[/tex]
where,
y is the displacement (in this case, the height of the building ledge),v_i is the initial velocity, t is the time,g is the acceleration due to gravity (9.81 m/s^2)and we know y = 47 m and t = 2.0 s.
Rearranging the equation and solving for v_i, we get:
[tex]v_i = (y - 1/2gt^2) / tv_i = (47 m - 1/29.81 m/s^2(2.0 s)^2) / 2.0 sv_i = 21.7 m/s[/tex]
Therefore, the initial speed with which the ball was thrown is 21.7 m/s. We can see that this velocity is positive, indicating that the ball was thrown upward from the building ledge.
Learn more about Initial speed
brainly.com/question/29187983
#SPJ11
(0)
1.If you had access to a thermometer, water of various temperatures, a scale and a calorimeter, devise a plan to determine the specific heat of the calorimeter. Derive an equation to use for your plan.
2.Using the same calorimeter, the materials above and some ice, devise a plan to determine the Latent heat of fusion of ice.
To determine the specific heat of the calorimeter:
Fill the calorimeter with a known mass of water (m1) at a known initial temperature (T1).
Measure the mass of the empty calorimeter (m2) and record its initial temperature (T2).
Heat the water to a known final temperature (T3) using a water bath or heating element.
Measure the final mass of the calorimeter and water (m3).
Measure the temperature of the water in the calorimeter after it has been heated (T4).
Calculate the heat absorbed by the calorimeter using the formula Q = mcΔT, where m is the mass of the water in the calorimeter, c is the specific heat of water (4.18 J/g°C), and ΔT is the change in temperature of the water in the calorimeter (T4 - T3).
Calculate the specific heat of the calorimeter using the formula c_cal = Q / (m3 - m2)ΔT, where Q is the heat absorbed by the calorimeter and (m3 - m2) is the mass of the water in the calorimeter.
The equation to use for this plan is: [tex]c_cal[/tex]= Q / (m3 - m2)ΔT
To determine the latent heat of fusion of ice:
Fill the calorimeter with a known mass of water (m1) at a known initial temperature (T1).
Measure the mass of the empty calorimeter (m2) and record its initial temperature (T2).
Add a known mass of ice (m3) to the calorimeter.
Measure the final mass of the calorimeter, water, and melted ice (m4).
Measure the final temperature of the water in the calorimeter (T3).
Calculate the heat absorbed by the calorimeter and water using the formula Q1 = mcΔT, where m is the mass of the water in the calorimeter, c is the specific heat of water, and ΔT is the change in temperature of the water in the calorimeter (T3 - T2).
Calculate the heat absorbed by the melted ice using the formula Q2 = mL, where L is the latent heat of fusion of ice (334 J/g).
Calculate the total heat absorbed by the system using the formula [tex]Q_total[/tex]= Q1 + Q2.
Calculate the mass of the melted ice using the formula [tex]m_ice[/tex]= m3 - (m4 - m2).
Calculate the latent heat of fusion of ice using the formula L = Q2 / [tex]m_ice.[/tex]
The equation to use for this plan is: L = Q2 / [tex]m_ice[/tex]
Learn more about calorimeter,
https://brainly.com/question/4802333
#SPJ4
Full Question ;
1.If you had access to a thermometer, water of various temperatures, a scale and a calorimeter, devise a plan to determine the specific heat of the calorimeter. Derive an equation to use for your plan.
2.Using the same calorimeter, the materials above and some ice, devise a plan to determine the Latent heat of fusion of ice.
A boy lifts a 17.8kg microwave oven 3.8 meters off the ground How much work did the boy do on the microwave
When a boy lifts a 17.8kg microwave oven 3.8 meters distance off the ground then work did the boy do on the microwave is 662.8 J.
Work done is the amount energy gained (loosed) in bringing the body from initial position to final position. It is denoted by W and its SI unit is joule(J). i.e. Work(W) is force(F) times displacement(s). W=F× s When a body is displaced with 1 newton of force by 1 m, then we can say that work has been done on the body by 1 joule. Writing for it's dimension,
W=F× s
Force has dimension [L¹ M¹ T²]
distance has dimension [L¹]
multiplying both the dimensions Force and Displacement we get, dimension of Work [L² M¹ T²].
given,
m = 17.8 kg
d = 3.8
W = Fd = mg.d = 17.8×9.8×3.8
W = 662.8 J
To know more about Work :
https://brainly.com/question/31050706
#SPJ1.
Resistance is measured in
A) ohms
B) volts
C) amperes
D) Faradays
E) joules
Answer:
Resistance is measured in ohms
the sunspots produce huge ejections of particles that: the sunspots produce huge ejections of particles that: accelerate the melting of ice sheets. do not generally interact with the earth system. rapidly increase the temperature at the surface of earth. produce auroras in earth's atmosphere.
The sunspots produce huge ejections of particles that: produce auroras in earth's atmosphere. The correct answer is D.
Sunspots are regions on the surface of the sun that appear darker than the surrounding areas because they are cooler. These regions are often associated with strong magnetic fields, which can cause eruptions on the sun's surface. When these eruptions occur, they can release a large amount of particles and electromagnetic radiation into space.
If these particles interact with the Earth's magnetic field, they can cause auroras, which are colorful displays of light in the atmosphere. However, these particles can also be dangerous to satellites and other technology in space, and can even disrupt communication and power grids on Earth.
So, the correct answer is "produce auroras in Earth's atmosphere." The correct answer is D.
Learn more about sunspot below.
brainly.com/question/8102155
#SPJ11