A wheel of radius R starts from rest and accelerates with a constant angular acceleration α about a fixed axis.
At what time t will the centripetal and tangential accelerations of a point on the rim have the same magnitude?
Express your answer in terms of the given quantities.

The force required to stop a car of mass 1400 kg in 2 seconds if it is moving with a velocity of 10 m/s is 7000 N in the opposite direction to the car's motion.

Calculate the force required to stop a car of mass 1400 kg in 2 seconds if it is moving with a velocity of 10 m/s.

To solve the given problem, we can use the equation:

F = (m * Δv) / Δt

where F = force

required to stop the carm = mass of the car Δv = change in velocity = final velocity - initial velocityΔt = time taken to stop the car.

Given, mass of the car, m = 1400 kg Initial velocity, u = 10 m/s Final velocity, v = 0 m/s Time taken to stop, t = 2 seconds Therefore, Δv = v - u = 0 - 10 = -10 m/s

Substituting the given values in the above equation, we get:

F = (m * Δv) / Δt = (1400 kg * (-10 m/s)) / (2 s) = -7000 N

Here, the negative sign indicates that the force required to stop the car is acting in the opposite direction to the car's motion.

for such more question on force

https://brainly.com/question/12785175

#SPJ11

If a 2000-kg car traveling at 30 m/s hits a wall and comes to a complete stop in 0.03 seconds the force that was applied to the car is 6,000,000 N

The force applied to the car can be calculated using the formula:

Force = (mass x change in velocity) / time

Here, the mass of the car is 2000 kg, the initial velocity is 30 m/s, the final velocity is 0 m/s (since the car comes to a complete stop), and the time taken is 0.03 seconds.

Substituting these values, we get:

Force = (2000 kg x (0 m/s - 30 m/s)) / 0.03 s

Force = -6,000,000 N

The negative sign indicates that the force is acting in the opposite direction to the motion of the car. So, the force applied to the car by the wall is 6,000,000 N.

Learn more about force at

https://brainly.com/question/13191643

#SPJ4

The coefficient of static friction, μs, between the tires and the road needs to be greater than the centripetal acceleration divided by the gravitational acceleration.

In this case, the centripetal acceleration can be calculated as ac = [tex](v^2)/r[/tex], where v is the speed and r is the radius of the curve. Therefore, the required coefficient of static friction μs = ac/g, where g is the gravitational acceleration, should be greater than μs = [tex](121 km/h)^2[/tex] / (150m) / [tex]9.81m/s^2[/tex] ≈ 0.93.

This means that the coefficient of static friction should be greater than 0.93 in order for the car to be able to round a level curve of radius 150 m at a speed of 121 km/h. This coefficient of static friction is necessary to counteract the centripetal force, allowing the car to round the curve without slipping.

If the coefficient of static friction is not large enough, the car will not be able to round the curve at the speed specified.

For more such questions on Coefficient of static friction.

https://brainly.com/question/13828735#

#SPJ11

Answer:

igneous rock is produced when magma exits and cools above (or very near) the Earth's surface. These are the rocks that form at erupting volcanoes and oozing fissures.

Based on Joshua's observation that he sees two different colored stars in the night sky, he can infer that the two stars have different temperatures.

When Joshua sees two different colored stars in the night sky, he can infer that the two stars have different temperatures. This is because the colors of stars depend on their temperatures. When a star is blue, it means that it's hotter than a star that is yellow or red.

As a result, Joshua can infer that the two stars have different temperatures due to their colors.A star's temperature is determined by its color. The color of a star is determined by its surface temperature.

Read more about stars :

https://brainly.com/question/30318208

#SPJ11

The star might be quite large in size, with a much larger surface area than the sun. This would increase its luminosity despite its cooler temperature.

The star has a high luminosity (100,000 x the sun's) and a cool temperature (3500 K) because of its size.

A star's luminosity is proportional to its size, so if a star is very large, it can have a high luminosity even if it is relatively cool.

Another possibility is that the star is in a phase of its life cycle where it has expanded and cooled, such as a red giant or supergiant, but still retains a high luminosity due to its large size.

These stars have relatively low surface temperatures, but their large sizes give them very high luminosities.

Therefore, this star is likely very large and thus has a very high luminosity despite its low temperature.

Learn more about Luminosity and temperature here:

brainly.com/question/31014896

#SPJ11

The velocity of the stone after 3 seconds have passed can be calculated using the formula v=u + at, where v is the velocity, u is the initial velocity, a is the acceleration (in this case the acceleration due to gravity, which is 9.8 m/s2), and t is the time. Therefore, the velocity of the stone after 3 seconds have passed will be 5.6 + (9.8*3) = 23.4 m/s.

The acceleration due to gravity causes any object to accelerate as it moves. This acceleration is always constant and acts downwards. Therefore, an object thrown with an initial velocity of 5.6 m/s will continue to accelerate and its velocity will increase. After 3 seconds have passed, the object will have an increased velocity of 23.4 m/s. In addition, when the stone is thrown off the bridge, it is subject to air resistance, which works against the stone and causes it to slow down. The magnitude of air resistance is dependent on a number of factors, such as the shape and size of the object. As such, the stone's velocity after 3 seconds might be slightly lower than the calculated value of 23.4 m/s.

Know more about velocity here:

https://brainly.com/question/29523095

#SPJ11

The block will rise to a height of approximately 4.36 cm after the bullet becomes embedded in it.

We can use the principle of conservation of momentum to solve this problem. The total momentum of the system (bullet + block) before the collision is,

p_before = m_bullet * v_bullet

where m_bullet is the mass of the bullet and v_bullet is its speed.

After the collision, the bullet becomes embedded in the block, so the total mass of the system is,

m_total = m_bullet + m_block

The velocity of the combined bullet-block system after the collision can be calculated using the conservation of momentum,

p_before = p_after

m_bullet * v_bullet = (m_bullet + m_block) * v_after

where v_after is the velocity of the combined bullet-block system after the collision.

Solving for v_after,

v_after = (m_bullet * v_bullet) / (m_bullet + m_block)

Now, we can calculate the kinetic energy of the bullet-block system just after the collision,

KE_after = (1/2) * (m_bullet + m_block) * v_after^2

The initial kinetic energy of the bullet is,

KE_before = (1/2) * m_bullet * v_bullet^2

The difference between these two energies represents the energy that has been transferred to the block,

delta_KE = KE_before - KE_after

This energy is used to raise the block to a certain height h. If we assume that all of this energy is converted into potential energy, then we can write,

delta_KE = m_block * g * h

where g is the acceleration due to gravity.

Solving for h,

h = delta_KE / (m_block * g)

Substituting the expressions for delta_KE, m_block, v_bullet, and v_after,

h = [(1/2) * m_bullet * v_bullet^2] / [(m_bullet + m_block) * g]

Substituting the given values,

h = [(1/2) * 0.0268 kg * (230 m/s)^2] / [(0.0268 kg + 1.40 kg) * 9.81 m/s^2] = 0.0436 m

To know more about bullet, here

brainly.com/question/15684008

#SPJ4

The direction the automobile should move to generate the maximum motional emf in the antenna, with the top of the antenna positive relative to the bottom towards the east.

A magnetic field is an area surrounding a magnet or an electric current, characterized by the presence of a force that can attract or repel other magnetic materials. The concept of magnetic fields is significant in a variety of contexts, including electromagnetism, particle physics, and ferromagnetism.

According to Faraday's Law of Electromagnetic Induction, the emf generated in a conducting wire moving in a magnetic field is proportional to the strength of the magnetic field and the velocity of the conductor.

The magnitude of the emf is given by ε = Blv sinθ, where

- ε is the magnitude of the induced emf,

- B is the magnetic field strength,

- l is the length of the wire in the magnetic field,

- v is the speed of the conductor relative to the magnetic field, and

- θ is the angle between the velocity vector and the magnetic field vector.

Due to the given conditions in the question, we can use the above formula for calculating the maximum emf. To generate the maximum motional emf in the antenna, the automobile should move in a direction perpendicular to both the antenna and the Earth's magnetic field. The angle between the velocity vector and the magnetic field vector should be 90°.

1: Identify the direction of the magnetic field. In this case, the magnetic field is directed toward the north and downward at an angle of 65.0° below the horizontal.

2: Determine the direction perpendicular to both the antenna and the magnetic field. This can be done by using the right-hand rule. Point your right thumb in the direction of the magnetic field (north and downward at 65.0° below the horizontal) and your right index finger in the direction of the antenna (vertical). Your right middle finger will then point in the direction of the motion required to generate the maximum emf (perpendicular to both the magnetic field and the antenna).

The direction the automobile should move to generate the maximum motional emf in the antenna, with the top of the antenna positive relative to the bottom, is to the east.

Learn more about emf here:

https://brainly.com/question/17329842

#SPJ11

The principle that states that the buoyant force experienced by an object is exactly equal to the weight of the fluid displaced is known as Archimedes' Principle. What is Archimedes' Principle? Archimedes' Principle is a scientific law that explains how objects behave in fluids (liquids and gases).

The buoyant force of an object in a fluid is equal to the weight of the fluid displaced by the object according to this principle. This principle is valid for any fluid and any object as long as the buoyancy and weight of the object and fluid are calculated correctly.

The force that causes objects to float or sink in fluids is known as buoyancy. The buoyant force on an object is the net upward force exerted by the fluid in which the object is submerged.

When an object is immersed in a fluid, the fluid exerts an upward force on the object. This buoyant force opposes the weight of the object and causes it to float if the buoyant force is greater than the weight of the object.

To know more about buoyant force refer here:

https://brainly.com/question/21990136#

#SPJ11

The charge (sign and magnitude) of a particle of mass 1.45 g must be for it to remain stationary when placed in a downward-directed electric field of magnitude 700 n/c is -1.029x10⁻⁴ C.

The magnitude of the charge must be equal to the magnitude of the electric field (700 n/c).

Therefore, we can write:-mg = qE

where, m = 1.45g = 1.45 x 10⁻³ kg

E = 700 N/cm = 1.45 x 10⁻³ kg x 9.81 m/s²

= 0.01419 N (Weight of the particle)

q = -1.029 x 10⁻⁴ C

To remain stationary when placed in a downward-directed electric field of magnitude 700 n/c, the charge (sign and magnitude) of a particle of mass 1.45 g must be negative.

Learn more about the Charge of a particle here:

https://brainly.com/question/28233928

#SPJ11

According to the given statement, if the current that flows through the wire is uniform, the drift velocity is the greatest at the section of wire with diameter d.

As the current is uniform throughout the wire, so the current through a given cross-sectional area is the same. Also, the current density, J is given by:

J = I/A

where I is the current and A is the cross-sectional area of the wire. Thus, if the area of the cross-section of the wire is more, the current density will be less. The current density is inversely proportional to the area of the wire, i.e. J ∝ 1/A. Hence, the drift velocity is inversely proportional to the current density, i.e. v[tex]_d[/tex] ∝ 1/J.

Thus, the drift velocity is greater where the cross-sectional area is less. So, the drift velocity is greater at the section of wire with diameter d.

So, the answer is at the section of wire with diameter d

Learn more about drift velocity at https://brainly.com/question/4269562

#SPJ11

For a rocket launched southward from Boulder, the Coriolis effect would cause it to drift to the east, leading to a curved flight path rather than a straight one.

The Coriolis effect is an important force to consider when launching a research rocket from Boulder. The Coriolis effect is the result of Earth's rotation and will cause any object moving along the surface of the Earth to veer to the right in the Northern hemisphere and to the left in the Southern hemisphere.

This effect is most noticeable for objects traveling long distances, such as a rocket. As it continues to fly south, the Coriolis force will continue to act upon it, increasing the curvature of its path. The magnitude of the Coriolis force depends on the speed of the object and its distance from the poles. Therefore, the more time the rocket has to travel, the more it will be deflected from its intended path.

The Coriolis effect is an important factor to consider for any research rocket launch. It has the potential to affect the accuracy and success of the mission and must be taken into account when planning a launch trajectory.

For more such questions on Coriolis effect.

https://brainly.com/question/14290551#

#SPJ11

Complete Question:

A research rocket is launched from Boulder straight towards the south. How would the Coriolis effect change the path of the rocket?

The kinetic energy of the cat is 177.15 Joules.

The kinetic energy of the cat can be calculated using the formula K = 0.5mv2, where m is the mass and v is the velocity.

The cat has a mass of 4.50 kg and is running at a velocity of 6.70 m/s, so we can substitute these values into the formula to find the kinetic energy:

K = 0.5 * 4.50 kg * (6.70 m/s)2

K = 177.15 Joules

Kinetic energy is the energy possessed by an object due to its motion. It is calculated by multiplying half of the object's mass by its velocity squared.

The cat has a mass of 4.50 kg and is running at a velocity of 6.70 m/s, so its kinetic energy is 177.15 Joules.

to know more about kinetic energy refer here:

https://brainly.com/question/26472013#

#SPJ11

The answer is that the radio waves will arrive first at the Earth when a star emits red light, blue light, x-rays, and radio waves.

This is due to the fact that radio waves are long-wavelength electromagnetic radiation. As a result, they are less likely to be impeded or absorbed by the intervening space medium, and they can propagate without being affected by any other disturbances in the cosmos.

Furthermore, radio waves are not influenced by the earth's atmosphere, which is responsible for interfering with the passage of light rays to the surface of the earth. In other words, radio waves can traverse enormous distances in space without being obstructed or attenuated by any physical barrier.

Light rays, on the other hand, propagate via a straight line, which is known as the line of sight. Light rays may be deflected or absorbed by cosmic dust, gas clouds, or other materials found in interstellar space. This may cause them to travel in different directions, which might cause them to be redirected from their initial path. As a result, light rays must contend with these obstacles before reaching the earth, which may cause them to be weakened or distorted by the time they arrive.

Similarly, X-rays are also electromagnetic radiation but they are absorbed by interstellar matter. They are also affected by magnetic fields, and they might be redirected from their path as a result of the interstellar medium. This might cause them to be slowed down and travel a longer distance, making their journey longer.

Thus, radio waves will arrive first because of their long wavelength and low interaction with cosmic matter.

To know more about radio waves, refer here:

https://brainly.com/question/28874040#

#SPJ11

The amount of heat lost through a 3' x 5' single-pane window with a storm that is exposed to a temperature differential is 108 BTU per hour.

The U-factor is a measure of how well a window insulates against heat transfer. The lower the U-factor, the better the window insulates.

Using these factors, we can calculate the rate of heat loss through the window in units of BTUs per hour.

Assuming a U-factor of 1.2 and a temperature difference of 60°F, the calculation would be:

Heat Loss = 1.2 BTU/(hrft^2F) x 15 ft^2 x 60°F

Heat Loss = 108 BTU/hour

Therefore, the heat lost through the window is 108 BTU per hour.

To know more about heat loss click here:

https://brainly.com/question/14228650

#SPJ11

Complete Question:

How much heat is lost through a 3' × 5' single-pane window with a storm that is exposed to a 60 Fahrenheit temperature differential?

According to the question the speed of the balls just before they collide is 1.81 m/s.

Collide is a term used to describe the process of two objects or particles coming into contact with each other, often resulting in a collision. In physics, the term is used to refer to the force of two objects impacting one another. In everyday language, the term is used to describe two things, such as people or ideas, coming together in a way that produces a powerful impact.

The initial energy of the system can be calculated as:
[tex]E_{initial[/tex] = m₁*g*h + 0
where m_1 is the mass of the upper ball (2.0 kg), g is the acceleration due to gravity (9.8 m/s²), and h is the vertical distance between the two balls (12.0 cm).
The final energy of the system can be calculated as:
[tex]E_{final} = (m_1 + m_2)\times v^2[/tex]
where m_1 and m_2 are the masses of the two balls (2.0 kg and 3.0 kg, respectively), and v is the velocity of the lower ball when the two balls stick together.
From these equations, we can solve for v:
[tex]v = sqrt[(m_1\timesg\timesh)/(m_1 + m_2)] = sqrt[(2.0 kg\times9.8 m/s^2\times12.0 cm)/(2.0 kg + 3.0 kg)] = 1.81 m/s[/tex]
Therefore, the velocity of the lower ball when the two balls stick together is 1.81 m/s.

To learn more about collide
https://brainly.com/question/29312023
#SPJ1

The frequency of the standing wave set up by the microwave is 8 GHz (or 8 × 10^9 Hz).

What is Wavelength?

The wavelength of the microwave is 12.2 cm, and the distance between the two parallel walls is 48.8 cm.

frequency is:

f = v/λ

where `v` is the velocity of the wave and `λ` is the wavelength of the wave.

to calculate the velocity of the microwave:

`v = 2dƒ`

where `d` is the distance between the two walls and `ƒ` is the frequency.

Substituting the given values,`

v = 2(0.488)ƒ`.

Rearranging the equation for `ƒ`,

'ƒ = v/2d`.

Substituting `v` and `d` with the values given in the question:

`ƒ = (2 × 0.488) / (2 × 0.122)`.

Simplifying the expression,

`ƒ = 8`.

To know more about wavelength:

https://brainly.com/question/4112024

#SPJ11

The component vr of velocity vector v along the radial direction from the radar gun to the car is the component of the velocity that is in the direction of the radial line that connects the radar gun to the car.

It can be calculated by taking the dot product of the velocity vector and the unit vector of the radial line.

The unit vector of the radial line is a vector that has a magnitude of one and that is pointing in the direction of the radial line.

The dot product of two vectors is equal to the magnitude of the first vector multiplied by the projection of the second vector on the first vector.

Thus, the component of velocity vr along the radial line is calculated by taking the magnitude of v multiplied by the projection of the unit vector of the radial line on v.

The component vr can be used to determine the speed of the car from the radar gun. The speed of the car is equal to the magnitude of vr divided by the speed of light.

By knowing the speed of the car, the speed limit can be compared to it in order to determine if the car is driving at a legal speed.

to know more about vector refer here:

https://brainly.com/question/24256726#

#SPJ11

True, energy can be transferred from kinetic energy (KE) to potential energy (PE) and vice versa

The principle of the conservation of energy states that energy cannot be created or destroyed but can only transferred or transformed from one form to another.

When an object is in motion, it has kinetic energy, and when it is at rest, it has potential energy.

When the object moves from a stationary position to a position in motion, some of its potential energy is converted into kinetic energy.

Conversely, when the object moves from a position in motion to a stationary position, some of its kinetic energy is converted into potential energy.

Hence, the statement is TRUE.

Learn about energy conservatiuon here: https://brainly.com/question/2137260

#SPJ1

The possible direction in which an electromagnetic wave is traveling if the electric field is oscillating along the z-axis and the magnetic field is oscillating along the x-axis is the y-axis.

An electromagnetic wave is composed of two mutually perpendicular fields that oscillate perpendicular to the direction of the wave's propagation. They are the electric field and the magnetic field. An electromagnetic wave is created when a charged particle is accelerated. These waves can travel through a vacuum or any medium, including air and water, at the speed of light.

In this scenario, the electric field of the wave oscillates along the z-axis, while the magnetic field oscillates along the x-axis. As a result, the wave's propagation direction must be perpendicular to both fields. As a result, the wave must be propagating along the y-axis.This is why it's critical to comprehend the interplay between electric and magnetic fields in the context of electromagnetic waves.

It's also critical to recognize that an electromagnetic wave's direction of propagation is always perpendicular to the oscillation directions of the two fields, which are mutually perpendicular to each other.

for such more question on electromagnetic wave

https://brainly.com/question/24319848

#SPJ11

To change 500g of water at room temperature (20°C) to steam at 100°C, you will need to add 1128.500 kJ of heat. This is because water requires a certain amount of heat energy, called the 'latent heat of vaporization', to turn from a liquid to a gas.

Mass of water (m) = 500g

Initial temperature ([tex]T_i[/tex]) = 20°C

Final temperature ([tex]T_f[/tex]) = 100°C

The heat of vaporization ([tex]H_{vap}[/tex]) = 2260 J/g.

To calculate the amount of heat required to convert 500 g of water at room temperature to steam at 100°C, we will use the formula:

[tex]Q = m \times H_{vap}\\Q = 500 g \times 2260 J/g\\Q = 1128500 J[/tex]

Therefore, it would take 1130000 J of heat to change this water to steam at 100°C.

For further detail on latent heat of vaporization, click on the below link:

https://brainly.com/question/30762921

#SPJ11

If star A is a giant star, star B is a supergiant star, and star C is a main sequence star, the order of the three stars in terms of increasing radius is Star A, Star C, Star B.

A giant star is a luminous star that is considerably larger and brighter than the sun. The distinction between giant and dwarf stars is primarily determined by their luminosity, and giant stars are more luminous. They are not, however, larger in diameter than dwarf stars. Their size is the outcome of a high luminosity-to-mass ratio.

A supergiant star is a massive star with a luminosity that is many times greater than that of a giant star. As a result, a supergiant star is much larger than a giant star. However, supergiant stars have a similar surface temperature as giant stars.

Sequence stars are stars that spend most of their lives in the primary sequence of stars. A main-sequence star is a star that is in the hydrogen-burning phase of its evolution. It is in a state of hydrostatic equilibrium, meaning that the gravitational force holding the star together is balanced by the pressure generated by the thermonuclear fusion taking place in its core.

The stars will have the following order in terms of increasing radius: Star A, Star C, Star B if star A is a giant star, star B is a supergiant star, and star C is a main sequence star, and they all have the same surface temperature.

To learn more about surface temperature of stars https://brainly.com/question/31116168

#SPJ11

The energy consumed by the 7 100-watt light bulbs left on for 1.5 days is 25.2 kWh.

Given:

Total bulbs = 7

Power of each bulb = 100 W

Time = 1.5 days

To find: Energy used in KWh; Formula used: Energy = Power * Time

Energy used by one bulb in a day = 100 W * 24 hours = 2400 Wh = 2.4 KWh

Total energy used by one bulb in 1.5 days = 2.4 KWh * 1.5 = 3.6 KWh

Total energy used by 7 bulbs in 1.5 days = 3.6 KWh * 7 = 25.2 KWh

Therefore, 25.2 KWh of energy would be used by 7 total 100-w light bulbs in a parallel circuit in your basement and you leave them on for 1.5 days.

To know more about parallel circuits click here:

https://brainly.com/question/11409042

#SPJ11

The amount of heat that left the system is 11.7 joules (given as a positive number).

When a piston is compressed fully with gas and 8.4 joules of work is done on it, and the internal energy (u) of the system is increased by 3.3 joules, we need to determine the amount of heat that left the system.

To determine the amount of heat that left the system, we need to use the First Law of Thermodynamics, which states that the change in internal energy (u) of a system is the sum of the heat (q) added to it and the work (w) done on it, which can be represented as:

u = q + w

Where, u = Change in internal energy of the system

q = Heat added to the system

w = Work done on the system

From the given information, w = -8.4 J (since work was done on the system), and u = 3.3 J.

Therefore, substituting these values in the above equation, we get:

3.3 J = q + (-8.4 J)3.3 J + 8.4 J

q = 11.7 J

For more question on heat click on

https://brainly.com/question/934320

#SPJ11

Answer:

hdjsigosorodcdjjgjejfiroodofohov jdjvjwigioeofe

An electron and a proton are placed at rest in a uniform electric field of magnitude 498 N/C. The speed of electron and proton 44.4 ns after being released is -3.87 × 10⁶ m/s and 2.13 × 10³ m/s respectively.

Given data:

Electric field (E) = 498 N/C,

Time (t) = 44.4 ns = 44.4 × 10⁻⁹ s,

Mass of electron (m₁) = 9.11 × 10⁻³¹ kg,

Mass of proton (m₂) = 1.67 × 10⁻²⁷ kg.

Formula:

The acceleration produced in the electric field is given by a = qE/m, where q is the charge of the particle, E is the electric field strength, and m is the mass of the particle.

From the above formula, we can find the acceleration produced by the electric field on the electron and proton as follows:

For electron (q = -e, where e is the charge of an electron)

a₁ = qE/m₁ = -eE/m₁

= -1.6 × 10⁻¹⁹ × 498/9.11 × 10⁻³¹

= -8.73 × 10¹⁴ m/s²

For proton (q = +e, where e is the charge of an electron)

a₂ = qE/m₂ = eE/m₂

= 1.6 × 10⁻¹⁹ × 498/1.67 × 10⁻²⁷

= 4.80 × 10⁷ m/s²

Using the kinematic equation, v = u + at, where u is the initial velocity, we can find the speed of each particle 44.4 ns after being released as follows:

For electron,

v₁ = u₁ + a₁t = 0 + (-8.73 × 10¹⁴) × 44.4 × 10⁻⁹

= -3.87 × 10⁶ m/s

For proton,

v₂ = u₂ + a₂t = 0 + (4.80 × 10⁷) × 44.4 × 10⁻⁹

= 2.13 × 10³ m/s

Thus, the speed of the electron is -3.87 × 10⁶ m/s and the speed of the proton is 2.13 × 10³ m/s.

To know more about electric field, refer here:

https://brainly.com/question/15800304#

#SPJ4

The acceleration of the skateboarder while going down the ramp is found to be 1m/s².

The skateboarder began to go down the ramp and that at a speed of 1.0m/s. After 3 seconds it is found that the speed of the skater is increased to 4.0m/s.

We can use the equation,

V = U+at, where, V is final speed, a is acceleration, t is time and U is initial speed.

Putting all the values,

4 = 1 +a(3)

a = 3/3

a = 1m/s²

The acceleration of the skateboarder is 1m/s².

To know more about acceleration, visit,

https://brainly.com/question/460763

#SPJ4

The value of the acting force between the two coils is approximately 5.65 N.

F = (μ₀/4π) * (2I₁I₂*l)/d

Substituting these values into the method, we get:

F = (4π × [tex]10^{-7}[/tex] T·m/A) * (230 A30 A*π m)/(0.05 m)

Simplifying the expression, we get:

F ≈ 5.65 N

Force is an agent that can change the state of motion or shape of an object. it is a vector amount that has both value and path. Force can be applied through direct contact or from a distance, such as through gravitational or electromagnetic fields. Pressure is measured in gadgets of newtons (N) inside the international gadget of units (SI). Some common examples of forces include friction, tension, gravity, and electromagnetic forces.

According to Newton's laws of motion, force is directly proportional to the rate of change of momentum of an object. This means that a larger force will cause a greater acceleration of an object, and a smaller force will cause a smaller acceleration. Understanding the concept of force is essential to many areas of physics, including mechanics, thermodynamics, and electromagnetism.

To learn more about Force visit here:  

brainly.com/question/30526425

#SPJ4

The speed acquired by the body is 49m/s and 59m/s respectively.

The speed can be calculated using the formula:

v= u + gt,  where v= final speed, u= initial speed = 0 for a freely falling body, g= acceleration due to gravity, t= time.

The speed acquired by a freely falling object 5 seconds after being dropped from a rest position is 49 m/s. This is because an object dropped from rest will accelerate at a rate of 9.8 m/s², so after 5 seconds it will be moving at a speed of 5 * 9.8 = 49 m/s.

The speed 6 seconds after being dropped from a rest position is approximately 59 m/s. This is because an object dropped from rest will accelerate at a rate of 9.8 m/s², so after 6 seconds it will be moving at a speed of 6 * 9.8 = 58.8 m/s.

In summary, the speed of an object dropped from rest 5 seconds after being dropped is 49 m/s, and 6 seconds after it is approximately 59 m/s.

To know more about speed, refer here:

https://brainly.com/question/17661499#

#SPJ11