Answer:
a scale
Explanation:
you use it to weigh things
Answer:
its not a scale
Explanation:
What is the shortest distance in which you can stop, after the brakes are applied, without the groceries sliding off the seat? The static and kinetic coefficients of friction are, respectively, 0.65 and 0.45. Assume that the surface of the seat is horizontal.
The shortest distance in which you can stop, after the breaks are applied is 80.38 m.
What is the shortest distance you can stop?The shortest distance in which you can stop is calculated by applying the principle of conservation of energy and work energy principle.
K.E = ¹/₂mv²
where;
K.E is your kinetic energy
m is your mass
v is your speed
The work done by force of friction before you stop is calculated as follows;
W = Ffx
where;
Ff is the frictional forcex is the shortest distance you can stopW = (μmg)x
where;
μ is coefficient of kinetic frictionW = K.E
(μmg)x = ¹/₂mv²
(μg)x = ¹/₂v²
x = (v²) / (2μg)
x = (32²) / (2 x 0.65 x 9.8)
x = 80.38 m
Thus, the shortest distance in which you can stop, after the breaks are applied is determined by applying the principle of conservation of energy.
Learn more about conservation of energy here: https://brainly.com/question/166559
#SPJ1
The complete question is below:
Your are driving at 32 m/s, what is the shortest distance in which you can stop, after the brakes are applied, without the groceries sliding off the seat? The static and kinetic coefficients of friction are, respectively, 0.65 and 0.45. Assume that the surface of the seat is horizontal.
The current in the circuit shown is 5.0 A, and the resistor is 2.0 Ω. What is the potential across the battery? A.8.0 VB.2.5 VC.10 VD.3.0 V
Given:
The current is,
[tex]i=5.0\text{ A}[/tex]The resistance is,
[tex]R=2.0\text{ ohm}[/tex]To find:
The potential across the battery
Explanation:
Using Ohm's law, we can write the potential across the battery is,
[tex]\begin{gathered} V=iR \\ =5.0\times2.0 \\ =10\text{ V} \end{gathered}[/tex]Hence, the potential across the battery is 10 V.
If you see an object following a curve path, you can safely assume:There is a net force being applied The net force is zero
If an object is following a curve, it means that it is changing direction. This change in direction will cause a change in velocity. Change in velocity causes acceleration. Since the velocity keeps changing, the acceleration is not zero. This also means that the net force is not zero. Therefore, you can safely assume:
There is a net force being applied
A child and sled with a combined mass of 25.2 kg slide down a frictionless hill, starting at the top. The sled starts from rest and acquires a speed of 6 m/s by the time it reaches the bottom of the hill. What is the height (in m) of the hill?Answer: _________ m (round to the nearest hundredth)
Given:
The mass of the child and the sled is,
[tex]m=25.2\text{ kg}[/tex]The child acquires a speed at the bottom of the hill is,
[tex]v=6\text{ m/s}[/tex]To find:
The height of the hill
Explanation:
The potential energy at the top of the hill will be converted to the potential energy at the bottom of the hill. So for the hill of height 'h', we can write, the potential energy as
[tex]PE=mgh[/tex]The kinetic energy is
[tex]KE=\frac{1}{2}mv^2[/tex]So,
[tex]\begin{gathered} mgh=\frac{1}{2}mv^2 \\ h=\frac{v^2}{2g} \\ h=\frac{6^2}{2\times9.8} \\ h=1.84\text{ m} \end{gathered}[/tex]Hence, the height of the hill is 1.84 m.
WILL MARK AS BRAINLIST!⚠️
Find the direction of this vector -22.2m, 12.6m
Answer:
Angle:
α = - 62°
Explanation:
Given:
Nₓ = 12.6 m
Ny = - 22.2 m
_________
α - ?
The direction of vector:
tg α = Ny / Nₓ
tg α = ( - 22.2 ) / 12.0 ≈ - 1.85
Angle:
α = arctg ( - 1.85) ≈ - 62°
The direction of the vector is [tex]\alpha=-62^o[/tex]. Given Components: Nₓ = 12.6 m and Ny = -22.2 m. The negative sign indicates that the angle is measured clockwise from the positive x-axis.
Finding the Tangent of Angle α:
- The tangent of an angle α can be calculated using the formula: tan(α) = opposite/adjacent. In this case, the opposite side is Ny, and the adjacent side is Nₓ. So, you have:
tan(α) = Ny / Nₓ
tan(α) = (-22.2) / 12.6 ≈ -1.85
Finding the Angle α:
- To find the angle α, you need to take the arctangent (inverse tangent) of the value you calculated above. This will give you the angle whose tangent is approximately -1.85:
α = arctan(-1.85)
α ≈ -62°
So, based on the given vector components Nₓ and Ny, the angle α is approximately -62 degrees.
The negative sign indicates that the angle is measured clockwise from the positive x-axis.
The angle obtained is in degrees. If you need the angle in radians, you could convert it using the relationship: radians = degrees × (π / 180).
To know more about vector:
https://brainly.com/question/16818924
#SPJ2
what is electric power
Answer:
Definition- Electric power is the rate at which electrical energy is transferred by an electric circuit.
Answer:
the rate at which electrical energy is transferred by an electric circuit.
Explanation:
In which direction does the tension force on the pirate point when a gust of wind rises up?
Answer: For downwind sailing, with the sail oriented perpendicular to the wind direction, the pressure increase on the upwind side is greater than the pressure decrease.
Explanation: this is all i know
Given v = 145 sin (200πt + 3π/2), what is the period?Question 12 options:10 msec5 sec.03 sec.005 sec
For a sine or cosine function of the form:
[tex]A\sin (B(x+C))+D[/tex]the perfiod is given by:
[tex]\frac{2\pi}{B}[/tex]In this case we have that:
[tex]B=200\pi[/tex]Then we have:
[tex]\frac{2\pi}{200\pi}=\frac{1}{100}=0.01=10\times10^{-3}[/tex]Therefore, the period is 10 ms
A 60.0 kg skier with an initial speed of 14 m/s coasts up a 2.50 m high rise
Find her final speed right at the top, in meters per second, given that the coefficient of friction between her skis and the snow is 0.38?
The final speed (in meters per second), given that the coefficient of friction between her skis and the snow is 0.38 is 14.65 m/s
How do I determine the final velocity?First, we shall obtain the force. This can be obatined as follow:
Mass (m) = 60 KgAcceleration due to gravity (g) = 9.8 m/s²Normal reaction (N) = mg = 60 × 9.8 = 588 NCoefficient of kinetic friction (μK) = 0.38Force (F) = ?F = μKN
F = 0.38 × 588
F = 223.44 N
Next, we shall obtain the acceleration of the skier. This can be obtained as follow:
Mass (m) = 60Force (F) = 223.44 NAcceleration (a) = ?a = F / m
a = 223.44 / 61
a = 3.724 m/s²
Finally, we shall determine the final velocity. This can be obtained as follow:
Initial speed (u) = 14 m/sDistance (s) = 2.5 mDeceleration (a) = 3.724 m/s²Final speed (v) =?v² = u² + 2as
v² = 14² + (2 × 3.724 × 50)
v² = 196 + 18.62
v² = 214.62
Take the square root of both sides
v = √214.62
v = 14.65 m/s
Thus, the the final speed is 14.65 m/s
Learn more about velocity:
https://brainly.com/question/26392384
#SPJ1
The final speed right at the top will be 14.65 m/s and the coefficient of friction between her skis and the snow is 0.38.
What is velocity?The ratio between displacement to time is referred to as the velocity of the object. It is a vector quantity with SI unit meter per second (m/s).
According to the question, the given information is :
Skier's mass, m = 60 kg
The acceleration due to gravity, g = 9.8 m/s²
Initial Speed, u = 14 m/s
Distance, s = 2.5 m
Deceleration is given as, a = 3.724 m/s².
Normal reaction force (N) will be equal to mg.
N = 60 × 9.8
N = 588 N
The coefficient of kinetic friction is given as, μ = 0.38
By using the formula,
F = μKN
F = 0.38 × 588
F = 223.44 N
Now, let's calculate the acceleration of the skier :
f = ma
a = f/m
a = 223.44/60
a = 3.724 m/s².
Now, calculate the velocity,
v² = u² + 2as
v² = 14² + 2 (3.724) (50)
v² = 196 + 18.62
v² = 214.62
v = 14.65 m/s.
Hence, the final speed right at the top will be 14.65 m/s.
To get more information about velocity :
https://brainly.com/question/28738284
#SPJ1
. Chloe performed an experiment on the amount of a certain gas that can be dissolved in water at different temperatures. Her data from the experiment is shown on the graph below. What type of function would best fit this set of data?
The values on the curve corresponding to the y axis are the y values
The values on the curve corresponding to the x axis are the x values
We would pick corresponding x and y values on the graph and compare them
On the graph, each small square represents 1 unit on both axes.
If x = 1, y = 1
If x = 4, y = 2
if x = 9, y = 3
We know that the square root of 1 is 1, the square root of 4 is 2 and the square root 9 is 3. This means that
y is the square root of x
The function is
[tex]y\text{ = }\sqrt[]{x}[/tex]Thus, it is a square root function
The first option is correct
A 22-pound force that makes an angle of 12° with an inclined plane is pulling a box up the plane. The inclined plane makes a 25° angle with the horizontal. What is the magnitude of the effective force pulling the box up the plane?
We will ave that the effective force is:
[tex]\begin{gathered} F=(22Lb)cos(12)\Rightarrow F=21.51924722...Lb \\ \\ \Rightarrow F\approx21.52Lb \end{gathered}[/tex]So, the effective force is 21.52 Pounds.
A student makes the following claim, "Acceleration is when an object changes speed, so it can be discussed as a scalar quantity." Explain the error in the student's claim. Provide an example of each quantity to support your answer.
A student makes the following claim, "Acceleration is when an object changes speed, so it can be discussed as a scalar quantity." The error here is that acceleration is said to be done when either speed of that object changes or direction of that object changes. Hence , acceleration is not a scaler quantity.
Scalar quantities are quantities that only have a magnitude and do not have any direction
A vector quantity is defined as the physical quantity that has magnitude as well as directions associated to it.
Acceleration is said to be occurred in two cases :
when the object changes its speed
or when the object changes its direction
since , acceleration depends upon both direction as well as magnitude ,hence it is a vector quantity not a scaler quantity.
for example : a stone attached to a string moving in a circular motion at a constant speed will be considered in accelerated motion because it is constantly changing its direction. Here we can see speed is constant hence magnitude (value of speed) is not changing but direction of the stone is changing . since , direction is changing the object is said to be in accelerated motion.
To learn more about acceleration here :
brainly.com/question/2303856
#SPJ1
how a baby monster could have one eye even if both parents had two eyes.
Answer:
Both parents could be heterogeneous: Hh.
Explanation:
Both parents could be heterogeneous.
Both parents are Hh.
H = 2 eyes , dominant trait
h = one eye, recessive trait
The childs genotype is hh.
What is the mass of 12 m3 of methylated spirit whose relative density is 0.8 ? ( Hint the density of water = 1000 kgm-3 ) A. 9600 kg B.9400 kg C. 8600 kg
ANSWER
A. 9600 kg
EXPLANATION
Given:
• The volume of the substance, V = 12m³
,• The relative density of the substance, 0.8
,• The density of water, 1000 kg/m³
Unknown:
• The mass of the substance, m
The relative density of a substance is defined as,
[tex]\rho_{relative}=\frac{\rho_{substance}}{\rho_{water}}[/tex]And the density of a substance is,
[tex]\rho=\frac{m}{V}[/tex]Let's solve the first formula for the density of the substance,
[tex]\rho_{substance}=\rho_{relative}\cdot\rho_{water}=0.8\cdot1000\operatorname{kg}/m^3=800\operatorname{kg}/m^3[/tex]Then, solve the second formula for m,
[tex]m=\rho\cdot V=800\operatorname{kg}/m^3\cdot12m^3=9600\operatorname{kg}[/tex]Hence, the mass of this substance is 9600 kg
Moments after making the dreaded decision to jump out the door of the airplane, Darin's 75.5-kg body experiences +128 N of air resistance upward. Determine Darin's acceleration (in m/s^2) at this instant in time.Hint: Your answer will be negative since he is falling (i.e., his acceleration is still in the down direction). Answer: ________ m/s^2
Given:
The mass of the Darin is m = 75.5 kg
The air resistance is
[tex]F_a=128\text{ N}[/tex]Required: Darin's acceleration.
Explanation:
According to Newton's second law, the downward force will be
[tex]F_g=\text{ mg}[/tex]Here, g = -9.8 m/s^2 is the acceleration due to gravity.
On substituting the values, the downward force will be
[tex]\begin{gathered} F_g=75.5\times(-9.8) \\ =\text{ -739.9 N} \end{gathered}[/tex]The net force will be
[tex]\begin{gathered} F_{net}=\text{ F}_g+F_a \\ =-739.9+128 \\ =-611.9\text{ N} \end{gathered}[/tex]Final Answer: Darin's acceleration is -611.9 N
Can you tell me the types of thermal processes and there meanings
Isothermal process: Temperature remains constant
Adiabatic process: No heat is exchanged to or from the system.
Isochoric process : Change in volume is zero.
ISobaric process : Pressure remains constant .
Please read the photo, Skill practice; how can you classify different types of energy?
There are 3 types of energy:
Kinetic energy(KE): energy of moving objects
Potential energy(PE): energy that an object has stored, position energy
Mechanical energy: The sum of both. PE+KE
A construction worker pushes a wheelbarrow 5.0 m with a horizontal force of 250.0 N. How much work is done by the worker on the wheelbarrow
Given data
*A construction worker pushes a wheelbarrow at a distance is d = 5.0 m
*The given horizontal force is F = 250.0 N
The formula for the work is done by the worker on the wheelbarrow is given as
[tex]W=F\times d[/tex]Substitute the known values in the above expression as
[tex]\begin{gathered} W=(250.0)(5.0) \\ =1250\text{ J} \end{gathered}[/tex]Hence, the work done by the worker on the wheelbarrow is W = 1250 J
Choose all the answers that apply.Asteroids:only orbit planetsonly orbit the sunare made of frozen gas and icetake millions of years to orbit the sun sometimes come very close to Earth
ANSWER:
5th option: sometimes come very close to Earth
STEP-BY-STEP EXPLANATION:
Asteroids are small rocky objects that orbit the Sun. Although asteroids orbit the Sun like planets, they are much smaller.
Therefore, of the options the only totally true option is "sometimes come very close to Earth"
So the correct answer is 5th option: sometimes come very close to Earth
Which of the following scientists discovered that atoms contain electrons?a. Daltonb. RutherfordC. Thomsond. Bohr
Until 1897, atom was thought as the fundemental particle. But in 1897 J.J Thompson discovered that the atoms contains electrons. He discovered during his experiment with cathod ray tube.
Thus the correct answer is option C.
2. During which Epoch did humans first appear?Holocene3. How many million years ago did humans first appear?2.8 million years ago4. What are the three periods of the Mesozoic Era?Cretaceous, Jurassic, Triassic5. When did dinosaurs first appear?Triassic period6. In what period did birds first appear?Jurassic7. During what period did the dome-like uplift of the Adirondack region begin?
(1)
The three eras within the Phanerozoic eon are
1) The Paleozoic era (541 million to 252 million years ago)
2) The Mesozoic era (252 million to 66 million years ago)
3) The Cenozoic era (66 million years ago to the present)
Identify the following examples of forces as either a contact force or a non-contact force:
Given:
Different kinds of forces
To find:
Identify the contact forces and non-contact forces
Explanation:
A force that acts between two surfaces in contact is a contact force, while the force that acts between the two surfaces, not in contact, is a non-contact force.
The contact forces here are:
Sitting on a chair (friction)
Skateboard slows down on a rough surface (friction)
Slamming the door (friction)
Non-contact forces:
Magnet attracting paper clips (magnetic force)
Two like charges repel each other (electrostatic force)
When A peach falls from a tree (gravitational force)
A wave traveling on a Slinky® that is stretched to 4 m takes 4.97 s to travel the length of the Slinky and back again.(a) What is the speed (in m/s) of the wave? m/s
ANSWER
1.61 m/s
EXPLANATION
Given:
• The distance the Slinky is stretched, d = 4 m
,• The time it takes for the wave to travel the length mentioned before and back, t = 4.97 s
Find:
• The speed of the wave, v
We know that the wave takes 4.97 seconds to travel the 4 meters the Slinky was stretched and back, so it travels a total of 8 meters in that time. This means that the speed of the wave is,
[tex]v=\frac{2d}{t}=\frac{8m}{4.97s}\approx1.61m/s[/tex]Hence, the speed of the wave is 1.61 m/s.
Use the data that you have for the air-filled tube. The tube is closed at one end.• Make a drawing of the standing wave in the tube when you have two, three, and four nodes or peaks. These will correspond to the first, second, and third overtones.• For each standing wave, label the nodes and the antinodes.• Label and record the distance in meters of the half wavelength (λ/2) for each standing wave.• Explain how the standing wave occurs.
Part 1)
When a standing wave oscilates in an air-filled tube closed at one end and open at the other, the closed end is a node and the open end is an antinode. Then, the diagram of the wave inside the tube looks like the following:
Part 2)
The nodes are the points where the two curves intersect (darker regions) and the antinodes are the clearer regions.
Part 3)
In each wave on the diagram, the distance between two consecutive nodes or two consecutive antinodes is the same as half the wavelength.
Part 4)
The standing waves arise from the combination of reflection and interference of waves inside the air column when the wavelengths match the length of the tube in such a way that the open end is an antinode and the closed end is a node.
a power transmission line is used to transmit 100 kw of power at a voltage of 10 kv with a loss of 1 kw. if the voltage is increased to 200 kv, what is power loss (in watts) to transmit the same amount of power?
To transmit the same amount of electricity, there is a 2.5 W power loss.
What is power loss?A power loss is the difference in power between a device, piece of equipment, pump set, or process' input and output (Pv). Pumps, equipment, and procedures, as well as electrical and electronic devices, turn this undesirable loss into heat.
Consumers receive electric energy in different units than what power plants create. A fraction of the units is lost in the distribution network. This difference between the distributed and created units is referred to as transmission and distribution loss.
According to Ohm's law, power can be defined as
P = VI
Here,
V = Voltage
I = Current
replacing
100kW = 10WI
I = [tex]\frac{100}{10}[/tex]
I = 10 Amp
Now we can find the resistance
R = [tex]\frac{P_{LOSS} }{I^{2} }[/tex]
Replacing,
R = [tex]\frac{1000}{10^{2} }[/tex]
R = 10Ω
In the second state when the voltage is 200kv, we have,
I = [tex]\frac{100*10^{3} }{200*10^{3} }[/tex]
I= [tex]\frac{100000}{200000}[/tex]
I= 0.5 A
Now power loss,
[tex]P_{t}[/tex] = [tex]I^{2}[/tex]R
[tex]P_{t}[/tex] = ([tex]0.5^{2}[/tex]) (10)
[tex]P_{t}[/tex] = 0.25 *10
[tex]P_{t}[/tex] =2.5 W
As a result, 2.5W is needed to transport the same amount of electricity.
For more information on the power loss refer to the below link;
https://brainly.com/question/14633095
#SPJ4
Calculate the potential energy of a roller coaster when the coaster is at the top of a 107.1 meter high hill and has a mass of 2,078.1 kg when fully loaded with passengers.
Given:
The mass when fully loaded with passengers is m =2078.1 kg
The height is h = 107.1 m
To find the potential energy of the roller coaster.
Explanation:
The potential energy of the roller coaster is given by the formula
[tex]P\mathrm{}E\text{. =mgh}[/tex]Here, g= 9.8 m/s^2 is the acceleration due to gravity.
Substituting the values, the potential energy of the roller coaster will be
[tex]\begin{gathered} P\mathrm{}E\text{. = 2078.1}\times9.8\times107.1 \\ =2181132.198\text{ N} \end{gathered}[/tex]Final Answer: The potential energy of the roller coaster is 2181132.198 N
A car with a mass of 1180 kilograms is being driven at 18.2 meters per second when it runs into a tree. What is the change in kinetic energy of the car? Include units in your answer. Answer must be in 3 significant digits.
The kinetic energy formula is
[tex]K=\frac{1}{2}mv^2[/tex]Where m = 1180 kg and v = 18.2 m/s.
[tex]K=\frac{1}{2}\cdot1180\operatorname{kg}\cdot(18.2\cdot(\frac{m}{s}))^2=195,431.6J[/tex]Therefore, the kinetic energy is 195,431.6 Joules.
An 1,810 W toaster, a 1,340 W electric frying pan, and an 85 W lamp are plugged into the same outlet in a 15 A, 120 V circuit. (The three devices are in parallel when plugged into the same socket.)(a) What current (in A) is drawn by each device?Itoaster= AIpan= AIlamp= A
ANSWER
• I(toaster) = 15.08 A
,• I(pan) = 11.17 A
,• I(lamp) = 0.71 A
EXPLANATION
Given:
• The toaster's power, P(toaster) = 1810 W
,• The frying pan's power, P(pan) = 1340 W
,• The lamp's power, P(lamp) = 85 W
,• The total current supported by the circuit, I = 15 A
,• The voltage of the circuit, V = 120 V
Find:
• The current across each device
Power is the product of current and voltage,
[tex]P=I\cdot V[/tex]We know that all three devices are connected in parallel, which means that they all have the same voltage, 120 V.
Solving the equation above for I,
[tex]I=\frac{P}{V}[/tex]So, for each device,
[tex]I_{toaster}=\frac{P_{toaster}}{V}=\frac{1810W}{120V}\approx15.08A[/tex][tex]I_{pan}=\frac{P_{pan}}{V}=\frac{1340W}{120V}\approx11.17A[/tex][tex]I_{lamp}=\frac{P_{lamp}}{V}=\frac{85W}{120V}\approx0.71A[/tex]Hence, the current drawn by each device is:
• I(toaster) = 15.08 A
,• I(pan) = 11.17 A
,• I(lamp) = 0.71 A
A car initially traveling at 3.2 m/s accelerated uniformly to a speed of 14.9 m/s over a distance of 60 meters. How much time does it take for the car to reach 9 m/s? Report your answer to 1 decimal place. Do not type in the unit or the computer will mark your answer incorrect.
Given
Initial velocity, u=3.2 m/s
Final speed , v=14.9 m/s
Distance travelled, s=60 m
To find
Time taken to reach 9 m/s
Explanation
By equation of kinematics,
[tex]\begin{gathered} v^2=u^2+2as \\ \Rightarrow14.9^2=3.2^2+2a\times60 \\ \Rightarrow222.01=10.24+12a \\ \Rightarrow a=17.65\text{ m/s}^2 \end{gathered}[/tex]Let the time taken to reach 9 m/s be t
Thus
taking v=9 m/s here we have
[tex]\begin{gathered} v=u+at \\ \Rightarrow9=3.2+17.65t \\ \Rightarrow t=0.3\text{ s} \end{gathered}[/tex]Conclusion
The required time is 0.3 s
True/False: The only difference between how electricity is produced at a coal plant and at a nuclear reactor is the type of fuel used to heat the water to steam. Select one:TrueFalse
To determine whether the given statement is true/false.
Explanation:
In nuclear reactors, after nuclear fission, energy is generated in the form of heat. This heat is used convert water steam.
In coal plant, burning coal produces steam.
Thus, the statement is true.