Create a diagram of your electroplating apparatus (an electrolytic cell). Then submit your drawing with the following terms labeled correctly. Or, beginning with the positive terminal of the battery and ending with the negative terminal of the battery, describe the path that the electricity takes and where each of the following occurs: anodecathodecopper stripbatterypositive terminalnegative terminalplace where oxidation occursplace where reduction occurselectrolyte solutioncoin (or nail)direction of electron flow

Let's analyze each option to find what best fit as an answer:

A - the function of a catalyst is to lower the energy of activation in a reaction, causing it to occur in a faster way. Since this question is not much about energy or kinetics, this would be the best fit, adding a catalyst or not adding it would not be too influential in the shift of the reaction.

B - Increasing the pressure in a reaction containing gases will mostly favor the side with a lower value of moles, smaller amount of moles = less pressure, so if we add more pressure, the reaction will shift towards the side of the products

C - If we treat heat as a reactant, if we add more temperature, it will shift towards the products, to counteract this increase of temperature

D - Adding reactants will favor the reaction to shift towards the products

Therefore the answer is letter A

Here, there are 2 conditions of the gas here.

The next equation is used: (1)

Data: conditions 1

P1 = pressure, in mmHg = 571.6 mmHg

T1 = temperature, in K = 25 °C + 273 = 298 K

V1 = 2,275 mL

-------------

Data: conditions 2

P2 = needs to be calculated

T2 = 175 °C + 273 = 448 K

V2 = 1,255 mL

--------------

From (1), P2 is cleared:

(P1 x V1/T1) x T2/V2 = P2

(571.6 mmHg x 2,275 mL/298 K) x (448 K/1,255 mL) = P2

1558 mmHg = P2

Answer: P2 = 1558 mmHg

The chemical element which magnesium would combine with in order to attain a subscript of 3 is nitrogen which result in the formation magnesium nitride ( Mg₃N₂ )

Magnesium is a metallic element which belongs to group 2 and and has a valence electron of 2. This means that in an electrovalent combination, magnesium loses 2 valence electrons to nitrogen to become Mg2+ ion. To complete this bonding, nitrogen which has 5 valence electrons accepts 3 of Mg2+ ions in addition with with its two N3− ions to form magnesium nitride. When this happens, magnesium then attains a subscript of 3.

Magnesium nitride is an electovalent or ionic compound and the bond which exist in it is Ionic bond. It is used in the synthesis of ceramic substances.

So therefore, we can confirm from above that when magnesium reacts with nitrogen, it attains a subscript of 3.

Read more on magnesium:

https://brainly.com/question/5759562

#SPJ1

Nitrogen is the chemical element that magnesium would mix with to get a subscript of 3, leading to the production of magnesium nitride.

Chemical elements are defined as a type of atom, including the pure substance made entirely of that type, with a specific number of protons in its nucleus.

Magnesium is a metallic element with a valence electron number of 2, and it is a member of group 2. This indicates that magnesium loses two valence electrons to nitrogen in an electrovalent combination to form the Mg2+ ion. Nitrogen, which has five valence electrons, accepts three Mg2+ ions in addition to its two N3 ions to complete this bonding and create magnesium nitride. Magnesium then achieves a subscript of 3 when this occurs.

Thus, Nitrogen is the chemical element that magnesium would mix with to get a subscript of 3, leading to the production of magnesium nitride.

To learn more about chemical elements, refer to the link below:

https://brainly.com/question/28948712

#SPJ1

Promethium is the 61st element that you can find in the periodic table and the number 147 indicates the atomic mass.

Remember that the atomic number (in this case, 61) represents the number of protons, so there are 61 protons in Pm-147.

And to find the number of neutrons, we have to subtract the atomic number (61) from the atomic mass (147):

So, the final answer is that we have 61 protons and 86 neutrons of Pm-147.

The sum of coefficients when the above-mentioned equation is balanced is 12.

A chemical equation is a symbolic representation of a chemical reaction where reactants are represented on the left, and products on the right.

A chemical equation is said to be balanced when the number of atoms of each element on both sides of the equation is the same.

According to this question, calcium hydroxide reacts with phosphoric acid as follows:

3Ca(OH)₂ + 2H₃PO4 → Ca₃(PO4)₂ + 6H₂O

The sum of the coefficients of the above balanced chemical equation is 3 + 2 + 1 + 6 = 12.

Learn more about coefficients at: https://brainly.com/question/28294176

#SPJ1

Explanation:

We form a supersaturated solution. At 45 °C the solution has more potassium nitrate that can be dissolved. The recrystallization of the excess dissolved solute can be started inserting a crystal that is called seed crystal.

Answer: seed

Taking into account the definition of enthalpy of a chemical reaction, 2.345 moles of CH₃OH are required to give off 1501 kJ of heat

The enthalpy of a chemical reaction as the heat absorbed or released in a chemical reaction when chemicals are transformed into a chemical reaction at constant pressure.

The enthalpy is an extensive property, that is, it depends on the amount of matter present.

In this case, the balanced reaction is:

2 CH₃OH (l) + 3 O₂ (g) → 2 CO₂ (g) + 4 H₂O(g)

and the enthalpy reaction ∆H° has a value of -1280 kJ/mol.

This equation indicates that when 2 moles of CH₃OH reacts with 3 moles of O₂, 1280 kJ of heat is released.

If it is required to give off 1501 kJ of heat, you can apply the following rule of three: If 1280 kJ of heat is released by 2 moles of CH₃OH, 1501 kJ of heat is released by how many moles of CH₃OH?

amount of moles= (1501 kJ× 2 moles of CH₃OH)÷ 1280 kJ

amount of moles= 2.345 moles of CH₃OH

In summary, the amount of moles required are 2.345 moles.

Learn more about enthalpy of a chemical reaction:

brainly.com/question/15355361

brainly.com/question/16982510

#SPJ1

Given the hypothetical thermochemical equation, expressed as:

We are to find the enthalpy change (ΔH ) for the reaction 2C → 3 A + B.

• You can see that the, given reaction, 2C → 3 A + B is the, reverse ,of the thermochemical equation 3 A + B → 2 C.

• Since the ,reverse reaction is possible,, the reaction enthalpy has the ,same numerical value, but with the, ,opposite sign

Therefore, the enthalpy change ∆H, in kJ/mol, be for the reaction 2 C → 3 A + B is -65.5kJ/mol

The chemical equation will be written as:

2C2H6 + 7O2    → 6H2O + 4CO2

Therefore,

The chemical equation will be written as:

2C2H6 + 7O2    → 6H2O + 4CO2

To learn more about Chemical Equations, refer to:

https://brainly.com/question/28294176

#SPJ13

When hydrogen (H+) and chlorine (Cl-) are mixed, they are called hydrochloric acid.

Hydrochloric acid is prepared by combining the gaseous hydrogen chloride with water. Due to the corrosive nature of the acid, ceramic, glass, or tantalum apparatus is used. Hydrochloric acid is also known as muriatic acid. It is also known as an aqueous solution of hydrogen chloride. It is a colorless solution with a pungent smell. It is classified as a strong acid because of more hydrogen atoms. It is a part of the gastric acid that is present in the digestive systems of animal species such as humans. Hydrochloric acid is an important laboratory and industrial chemical.

So we can conclude that hydrochloric acid is formed when hydrogen and chlorine are mixed.

Learn more about acid here: https://brainly.com/question/25148363

#SPJ1

Answer:

Explanation:

Here, we want to get what will happen when an Atthenius base interacts with water

By definition, an Arrhenius base increases the concentration of hydroxide ions in aqueous solutions

What this simply mean is that when an Arrhenius base comes in contact with water, the solution is expected to have an increase in the concentration of hydroxide ion. This can be measures pH wise and we expect an increase in the pH of the solution from 7

Answer: ΔT = 62.98

Explanation:

This can be done using Gay Lusac's Law which states that Pressure is proportional to temperature

So, we take p1 = 4.62 atm, t1 = (27+273)°K, p2 = 5.59 atm, t2=?

now, P1/T1 = P2/T2

From here find out T2 which would be in Kelvin and then subtract 273 to convert it into celsius. Then find the difference between T1 and T2 and you should have your answer.

Final temperature of the two pieces of metal is 32.25°C

Temprature is the degree of hotness or coldness of the object

Here given data is

Mass of iron = 150 g

Mass of copper = 275 g

Specific heat of iron = 25.09 J/mol°C

Specific heat of copper = 25.46J/mol°C

Temprature in iron = 47°C = initial temprature = T₁

Temprature in copper = 20°C = initial temprature = T₁'

So here we have to find final temprature of  two pieces of metal =?

So, the formula is Q =mcΔT

Q =  (150 g - 275 g) × (25.09 J/mol°C - 25.46J/mol°C) × ( 47°C-20°C )

Q = 125×0.37×27

Q = 243 J

243 J/125×0.37 = 5.25°C = change in temprature

Initial temprature  = 27°C

Final temprature = ?

ΔT = T₂ - T₁

27°C = T₂ - 5.25°C

T₂ = 27°C +  5.25°C

T₂ = 32.25°C

Final temperature of the two pieces of metal is  32.25°C

Know more about metal

https://brainly.com/question/21265758

#SPJ1

The group of organic substances known as organic carbonic acids includes zinc carbonate. Compounds with the carbonic acid functional group are known as organic carbonic acids. Zinc carbonate is a substance with a very low acidity

An odourless, white, sand-like substance known as zinc carbonate. Cosmetics, lotions, ceramics, pottery, rubber, feed additives, and medications all use it.

Zinc (Zn), carbon (C), and oxygen make up the inorganic compound known as zinc carbonate (O). ZnCO3 is its chemical composition. Oxygen is -2, carbon is +4, and zinc has an oxidation state of +2.

With the chemical formula ZnCO3, zinc carbonate is a white, insoluble zinc salt. By reacting with the proper amounts of sulphate, it can be used to create the majority of straightforward zinc salts. Smithsonite, also known as zinc spar, is a mineral that contains zinc carbonate.

To learn more about Zinc carbonate refer to:

https://brainly.com/question/28311138

#SPJ13

In order to solve this question we need to set up the properly balanced equation first:

CaCO3 + 2 HCl -> CaCl2 + H2O + CO2

Now that our reaction is properly balanced, we have to find the limiting reactant in order to find how much mass of CaCl2 will be produced

We have:

10.0 g of CaCO3, molar mass = 100.086 g/mol

15.0 g of HCl, molar mass = 36.46 g/mol

Now we need to find the number of moles of the reactants, and see if the amount available of the other reactant is the one needed to react.

CaCO3:

100.086g = 1 mol

10g = x moles

x = 0.099 moles of CaCO3

According to the molar ratio, the CaCO3 and HCl will have a relationship in which we will always need 2 times more HCl than CaCO3, therefore if we have 0.099 moles of CaCO3, we will need 0.198 moles of HCl in order to proceed with the reaction, but we don't know if that is the right amount, let's check:

HCl:

36.46g = 1 mol

15.0g = x moles

x = 0.411 moles of HCl, this means that we have an excess of HCl, since we only need 0.198 moles in order to react with CaCO3. Therefore Calcium carbonate is the limiting reactant.

Now that we know which one is the limiting reactant, we can find the mass produced of CaCl2.

Again the molar ratio is important here, but know, we will always have the same number of moles for CaCO3 and CaCl2, 1:1 will be the molar ratio, therefore if we have 0.099 moles of CaCO3, we will also have 0.099 moles of CaCl2, using its molar mass, 110.978g/mol, we can find the final mass

CaCl2:

110.978g = 1 mol

x grams = 0.099 moles

x = 11.0 grams (it is actually 10.986 grams, but I have rounded up to 11 grams)

The final pressure of a sample of gas held in a container with a volume of 6.02 L and a temperature of 59.5℃ is 0.26atm.

The pressure of a given gas can be calculated using Boyle's law equation as follows:

P₁V₁ = P₂V₂

Where;

According to this question, a given sample of gas is held in a container with the volume of 6.02 L with a temperature of 59.5℃ at a pressure of 1.20 atm. The final pressure can be calculated as follows;

At STP;

1.2 × 6.02/332.5 = P × 22.4/273

0.0217 = 0.082P

P = 0.26atm

Therefore, 0.26atm is the final pressure of the gas.

Learn more about pressure at: https://brainly.com/question/10175101

#SPJ1

Answer:

288 g.

Explanation:

Measurements => Density.

Density is the ratio of the mass of an object to its volume:

where D is density, m is mass, and V is volume.

We have two data: the volume (32.1 mL) and the density (8.96 g/mL) and we need to find the mass.

We can solve for 'm' in the given equation and replace the given data, as follows:

The answer would be that the mass is 288 g.

Answer: One centimeter per month.

Explanation: Technically speaking, human hair grows about 1/2 inch a month or 6 inches a year.  1/2 inch is approx 1.27 centimeters, or in other words, one centimeter a month.  Therefore, that's your answer.

Let me know if I got it right! :)

Answer:

1 centimeter per month

Explanation:

Human hair typically grows 6 inches in a year. Since there's 12 months, we can tell that hair grows 1/2 an inch per month. 1/2 an inch is about 1 cm.

Please mark brainliest!

• The bond that exist between the CCl4 compound ,forms a covalent bond ,, this can be illustrated in the diagram below:

• We can see that it contains four non-polar covalent bond between carbon and chloride

If the wavelength of green light from a traffic signal is approximately 5.2 ×10⁷ m , then the frequency of the light would be 5.769 × 10¹⁶ Hz .

It can be understood in terms of the distance between any two similar successive points across any wave for example wavelength can be calculated by measuring the distance between any two successive crests.

C = λν

The frequency of the green light = 3 × 10⁸ / 5.2 ×10⁷

                                                       = 5.769 × 10¹⁶ Hz

Thus , If the wavelength of green light from a traffic signal is approximately 5.2 ×10⁷ m , then the frequency of the light would be 5.769 × 10¹⁶ Hz .

Learn more about wavelength , refer to the link given below ;

brainly.com/question/7143261

#SPJ1

A. r: distance

B. q: charge

C. Fe: electric force

D. E: Electric field

So the answer is option C.

The final pressure of the gas when the sample gas is administered to a new volume of 10.0 L at 20.2℃ would be 0.245 atm.

The problem here has to do with the combined gas law. The law is mathematically expressed as:

[tex]p_1v_1/t_1[/tex] =[tex]p_2v_2/t_2[/tex]

Where [tex]p_1[/tex] = initial pressure, [tex]v_1[/tex] = initial volume, [tex]t_1[/tex] = initial temperature, [tex]p_2[/tex] = final pressure, [tex]v_2[/tex] = final volume, and [tex]t_2[/tex] = final temperature.

In this case,

Rearranging the combined gas equation:

[tex]p_2[/tex] = [tex]p_1v_1t_2/t_1v_2[/tex]

Substituting the different variables:

[tex]p_2[/tex] = 1.2 x 6.02 x 20.2/59.5 x 10.0

      = 145.9248/595

      = 0.245 atm

Thus, the final pressure of the sample gas will be 0.245 atm.

More on combined gas law can be found here: https://brainly.com/question/13154969

#SPJ1

The easiest way to tell which layer is wich, while performing the extraction experiment is to run a little test.

The test will consist on mixing a sample of both layers in different recipients with water.

After mixing them, the recipient with a homogeneous phase will have the aqueous layer, and the other one will be the organic layer.

Answer: The layer on top.

Explanation:

Assuming you were completing an extraction experiment and had a setup similar to the one below then the organic layer will float on top of the aqueous since most non-halogenated organic solvents have a density of less than 1.

Answer:

Explanation:

Here, we want to get the number of moles in the given mass

Mathematically:

The molar mass of CaCO3 is 100 g/mol

The number of moles is thus:

The existence of isotopy shows that the atoms of the same element are not exactly alike.

Recall that the atom is the simplest particle of a substances that is able to take part in a chemical reaction. Note that the empirical study of the atom became much more common after the study of John Dalton that led to the Dalton Atomic Theory.

Now, one of the postulates of the theory is the atoms of the same elements are exactly alike in all respects and are different from the atoms of other elements. The existence of isotopy have shown that the atoms of the same element could be different and behave slightly differently from each other.

Learn more about isotopy:https://brainly.com/question/27475737

#SPJ1

Answer:

c

Explanation:

V atery few members of the public have heard of a case dealing with forensics. The use of forensics is more popular with the public and law enforcement. Colleges have stopped offering courses and majors in forensic science.

Subtract the numbers and write the power 10^3

The answer is 8.3x10^3

Answer:

Explanation:

Here, we want to get the number of moles present in the solution

Mathematically:

From the question:

We have the molarity as 1.5 M

We have the volume as 2.0 L

Thus, we have the number of moles as:

The density of the solid object is obtained to be 2.89 g/mL.

The density is defined as the ratio of the mass to the volume of the object. In this case, the density is to be obtained by the use of the displacement method of the solving the problem.

Mass of the empty cylinder =  50 g

Mass of water and cylinder = 120 g

Mass of water alone = 70 g

Mass of water, cylinder and the object = 250 g

Mass of the object = 250 g - 120 g = 130 g

Volume of the object = 75 mL -  30 mL  = 45 mL

Density of the object = 130 g/45 mL

= 2.89 g/mL

Learn more about density:https://brainly.com/question/15164682

#SPJ1

Step 1: Write and balance the equation:

3 NaCl + Al(NO3)3 → AlCl3 + 3 NaNO3

Step 2: We need to find the limiting and excess reactant. For this, we need to look at the stoichiometric ratio between the reactants:

3 moles of NaCl reacts with 1 mole of Al(NO3)3.

Now we do a rule of 3 for both.

For 9 moles of NaCl:

3 moles of NaCl --- 1 mole of Al(NO3)3

9 moles of NaCl --- x mole of Al(NO3)3

3x = 9

x = 3 moles of Al(NO3)3

For 4 moles of Al(NO3)3:

3 moles of NaCl --- 1 mole of Al(NO3)3

x moles of NaCl --- 4 moles of Al(NO3)3

x = 12 moles of NaCl

As we can see, to react with 4 moles of Al(NO3)3 we should have 12 moles of NaCl, but we have just 9. So the NaCl is the limiting reactant and the excess reactant is Al(NO3)3.

Step 3: We need to look at the stoichiometric ratio between the limiting reactant (NaCl) and NaNO3:

3 moles of NaCl --- 3 moles of NaNO3

9 moles of NaCl --- x moles of NaNO3

x = 9 moles of NaNO3

Answer: The maximum amount of NaNO3 that was produced during the experiment is 9 moles.