f(x) = 2x - 1 g(x) = 7x + 8 find (gof) (x)

This report highlights the impact of human activity on three different locations: New York City, the Amazon Rainforest, and the Sahara Desert. The measurements were taken 50 years ago, in the present day, and the predicted future development impact.

## New York City

Water pollution in parts per million (ppm) was measured in New York City. Fifty years ago, the water pollution was 625ppm, and presently, it has increased to 893ppm. The predicted future development impact is 843ppm. To decrease human impact on this location, it is recommended to create gardens on all of the rooftops. The plants will help absorb some of the pollutants and reduce runoff into waterways.

## Amazon Rainforest

CO2 levels in parts per million (ppm) were measured in the Amazon Rainforest. Fifty years ago, the CO2 levels were 318ppm, and presently, it has increased to 402ppm. The predicted future development impact is 378ppm. To decrease human impact on this location, it is recommended to limit the amount of timber that can be removed per year. The Amazon Rainforest is often referred to as the "lungs of the planet" due to its ability to absorb carbon dioxide and produce oxygen. By limiting deforestation, the amount of carbon dioxide released into the atmosphere will decrease, and the rainforest will continue to produce oxygen, benefiting both the local and global environment.

## Sahara Desert

The loss of land by erosion in meters was measured in the Sahara Desert. Fifty years ago, the erosion was 1.2 meters, and presently, it has increased to 3.5 meters. The predicted future development impact is 2.6 meters. To decrease human impact on this location, it is recommended to build better enclosures to decrease overgrazing by livestock. Overgrazing leads to soil compaction, which makes it difficult for vegetation to grow and prevents the soil from holding water. By implementing better enclosures, the livestock will be limited to a smaller area, allowing the vegetation to recover and hold the soil in place.

## Conclusion

In conclusion, all three locations experienced an increase in human impact over the years. By analyzing the data, the location that could benefit the most from decreasing human impact is the Amazon Rainforest. Limiting the amount of timber that can be removed per year will have a positive impact on this location. However, it is important to continue monitoring all three locations to ensure that the human impact is decreasing and not increasing.

## Recommendations for Local Communities

To decrease the local effects of human impact on the environment, two recommendations are:

1. Reduce the use of single-use plastics, such as straws and bags, to decrease pollution. Single-use plastics are a major source of pollution in our oceans, and by reducing our reliance on them, we can help reduce the amount of plastic that ends up in our waterways.

2. Plant more trees and vegetation to increase the amount of oxygen in the air. Trees and plants produce oxygen through photosynthesis, which helps clean the air we breathe. By planting more trees and vegetation in our communities, we can help reduce the amount of pollution in the air and create a healthier environment for ourselves and future generations.

## Recommendations for Global Governments

To decrease the global effects of human impact on the environment, two recommendations are:

1. Invest in renewable energy sources, such as solar and wind power, to decrease the use of fossil fuels. Fossil fuels are a major contributor to greenhouse gas emissions, which are responsible for climate change. By investing in renewable energy sources, we can decrease our reliance on fossil fuels and reduce our carbon footprint.

2. Implement policies to decrease deforestation and promote reforestation to decrease the loss of wildlife habitats and increase the amount of oxygen in the air. Deforestation is a major contributor to climate change, as it releases carbon dioxide into the atmosphere and reduces the amount of oxygen produced by trees. By implementing policies to decrease deforestation and promote reforestation, we can help mitigate the effects of climate change and create a healthier environment for all living beings.

The type of transformation represented in the figure is the translation transformation i.e. (c) none of these

Given the triangles ABC and A'B'C'

The transformation between the triangles is translation

The translation transformation is a type of transformation that moves an object without changing its size, shape, or orientation.

This transformation involves sliding an object in a particular direction by a certain distance, either horizontally or vertically.

In this case, the direction is horizontally and vertically

Read more about transformation at

https://brainly.com/question/27224272

#SPJ1

The volume of the solid is 7.58 thousandths when rounded to the nearest thousandth.

Area is a measure of the size of a given space or the amount of a given surface. It can be measured in square feet, square meters, acres, hectares, and other units. Area can be used to describe the size of a two-dimensional shape or the surface area of a three-dimensional object. Area can also be used to calculate the amount of material needed to cover a given space, such as for a roof, carpet, or other covering.

To find the volume of the solid, we will use the following formula:
V=∫baπ(y2−(x−1)2)dx

Where b is the upper bound of the integral, a is the lower bound of the integral and y is the height of the solid.

Since the region R is the base of the solid, we can set a = 0 and b = 2, since this is the x-value at which the two functions intersect. Additionally, we can set y = ln(x) + 1 since this is the height of the solid.

Therefore, the volume of the solid is:
V = ∫02π(ln(x)2 + 12 − (x−1)2)dx

Calculating the integral, we get:
V = [π(xln(x)2 + x − 2xln(x) − x + 1)]02

Substituting the bounds of the integral, we get:
V = [π(22ln(2)2 + 2 − 4ln(2) − 2 + 1)] − [π(02ln(0)2 + 0 − 2ln(0) − 0 + 1)]

Simplifying the equation, we get:
V = π(ln(2)2 + 1 − 2ln(2))

Finally, substituting the value of ln(2) into the equation, we get:
V = 3.14159 (2.386294 + 1 − 4.772188) ≈ 7.58 thousandths

Therefore, the volume of the solid is 7.58 thousandths when rounded to the nearest thousandth.

In conclusion, the volume of the solid whose base is the region R and each cross section perpendicular to the a-axis is a semicircle is 7.58 thousandths when rounded to the nearest thousandth. This was calculated by integrating the equation V=∫baπ(y2−(x−1)2)dx with the bounds of integration a=0 and b=2 and the height of the solid y=ln(x)+1.

To know more about area click-
http://brainly.com/question/16519513
#SPJ1

Frequency Distribution Table is down below.

Class Count Cumulative Frequency Table

160 - 180 3 3

181 - 201 5 8

202 - 222 14 22

223 - 243 14 36

244 - 264 10 46

265 - 285 2 48

286 - 306 1 49

307 - 327 1 50

Total 50     100

Here its peak is in between 202 to 243 frequency range. There are three extreme values that are 270, 295 and 325 pounds weight.

Median lies in the interval 223-243 and mean also lies in that interval. Maximum values lies in between 200 - 225 interval.

The distribution is left skewed.

Learn more about frequency distribution on;

https://brainly.com/question/17114842

#SPJ1

We can claim that after answering the above question, the As a result, angles the regular polygon has ten sides.

An angle is a shape in Euclidean geometry that is made up of two rays, known as the angle's sides, that meet at a point in the middle known as the angle's vertex. Two rays may combine to generate an angle in the plane in which they are located. An angle is formed when two planes collide. They are known as dihedral angles. In plane geometry, an angle is a potential configuration of two rays or lines that share a termination. The English term "angle" derives from the Latin word "angulus," which means "horn." The vertex is the point at where the two rays, also known as the angle's sides, converge.

The interior angle of a regular polygon with n sides is calculated as follows:

(n-2) * 180° / n = interior angle

The internal angle of the polygon is presented to us as 144°. When we plug this into the formula, we get:

144° = (n - 2) * 180° / n

144° * n = (n - 2) * 180°

144° * n = 180° * n - 360°

144° * n + 360° = 180° * n

360° = 36° * n

n = 10

As a result, the regular polygon has ten sides.

To know more about angles visit:

https://brainly.com/question/14569348

#SPJ1

Answer:

Step-by-step explanation:

modal weight:  the weight that appear most often

4.5 kg  appears 3 times

6-sided polygon:  even though it is an irregular polygon, the interior angles still add up to (6 - 2)180 = 720

therefore, angle f = 720 - 576 = 144      (the sum of a+b+c+d+e is very blurry in the image, it looks like 576--please double check that!)

modal score:  read this right off the graph.  The score with the highest frequency is the modal score:  14   (meaning, 9 contestants got this score)

The lumpsum amount invested in 18 years ago for the given value Future value and interest is = Rs 2763,18.3268

What about lumpsum?

In mathematics, a lump sum refers to a single, fixed amount of money or quantity of something that is paid or received all at once, rather than being paid or received in installments or over a period of time.

The term "lump sum" can be used in various mathematical contexts, such as in finance, where it can refer to a single payment or investment, or in statistics, where it can refer to a single value or data point.

Define future value:

In mathematics, future value (FV) refers to the value of an investment or cash flow at a specified date in the future, assuming a certain rate of return.

The future value of an investment is the amount of money that an investor would expect to have at a specified date in the future if they were to invest a certain amount of money today, and if that investment earns a certain rate of return over time.

⇒ The formula for calculating the future value of an investment is:

[tex]FV = PV x (1 + r)^n[/tex]

According to the given information:

Interest Rate = 5%

Time Period =  18 years

Future Value = Rs 6649,93.

Using the concept of TVM calculation we have that,

Present value = [tex]\frac{Future Value}{(1+r)^{t} }[/tex]

So, the Present Value = [tex]\frac{664993}{(1+0.05)^{18} } = 2763,18.3268[/tex]

Hence, the Lumpsum Amount is Rs 2763,18.3268

To know more about lumpsum visit:

https://brainly.com/question/21126923

#SPJ1

Up to 180 degrees

Your Welcome

Answer:

183.3

Step-by-step explanation:

Since there were 1 angle and 2 sides, I used law of cosines

We will use sine function, and length of the opposite side is [tex]\frac{25\sqrt{3}}{2}$[/tex] feet.

To solve for the opposite side of the right triangle, we would use the sine function. In a right triangle, the sine of an angle is defined as the ratio of the length of the opposite side to the length of the hypotenuse.

In this problem, we are given that one angle of the right triangle is 60 degrees and the hypotenuse is 25 feet. Let's label the opposite side as x and the adjacent side as y. Then we can use the sine function:

[tex]$\sin 60^\circ = \frac{x}{25}$[/tex]

Simplifying the left side, we have:

[tex]$\frac{\sqrt{3}}{2} = \frac{x}{25}$[/tex]

Multiplying both sides by 25, we get:

[tex]$x = \frac{25\sqrt{3}}{2}$[/tex]

Therefore, the length of the opposite side is [tex]\frac{25\sqrt{3}}{2}$[/tex] feet.

To know more about Function visit:

brainly.com/question/28193995

#SPJ1

The amount of time needed for this capital to triple would be 50 months, the letter "d" being correct. We arrive at this result using simple interest.

Simple interest is a type of financial calculation that is used to calculate the amount of interest on borrowed or invested capital for a given period of time.

In order to find the amount of time required for the principal to be equal to three times the redemption, we have to note that the amount will be equal to three times the principal, using this information in the formula. Calculating, we have:

M = C * (1 + i * t)

3C = C * (1 + 0.04t)

3 = 1 + 0.04t

0.04t = 3 - 1

0.04t = 2

t = 2/0.04

t = 50

Answer:

Step-by-step explanation:

To find the LCM of the given expressions, we need to factor each expression completely and then find the product of the highest powers of all the factors.

ax² - (a² + ab)x + a²b can be factored as:

ax² - (a² + ab)x + a²b = a(x - b)(x - a)

bx² - (b² + bc)x + b²c can be factored as:

bx² - (b² + bc)x + b²c = b(x - c)(x - b)

cx² - (c² + ac)x + c²a can be factored as:

cx² - (c² + ac)x + c²a = c(x - a)(x - c)

Now, the LCM is the product of the highest powers of all the factors.

The highest power of a is a², the highest power of b is b², and the highest power of c is c². So, the LCM is:

LCM = a²b²c²(x - a)(x - b)(x - c)

Therefore, the LCM of ax² - (a² + ab)x + a²b, bx² - (b² + bc)x + b²c and cx² - (c² + ac)x + c²a is a²b²c²(x - a)(x - b)(x - c).

The slope for the given point through which it passes through the graph is [tex]\frac{y_{2} - y_{1} }{x_{2} - x_{1} }[/tex] = infinity .

What about slope?

The slope of a line is a measure of its steepness. It is defined as the ratio of the vertical change (rise) between two points on the line to the horizontal change (run) between the same two points. In other words, it is the rate at which the line rises or falls as we move along it in the horizontal direction.

Define graph:

In mathematics, a graph is a visual representation of a set of data or mathematical relationships between variables. Graphs can be used to display and analyze data in a variety of formats, including line graphs, bar graphs, scatter plots, and pie charts.

According to the given information:

As, we know that the slope =  [tex]\frac{y_{2} - y_{1} }{x_{2} - x_{1} }[/tex]

⇒ In which the point given are (-1,8) and (-1,-4)

By putting the value of the given point we have that

⇒ [tex]\frac{-4-(8)}{-1-(-1)}[/tex] = infinity.

To know more about slope visit:

https://brainly.com/question/3605446

#SPJ1

There are 1,350 desks in 45 classrooms that each have 6 rows of 5 desks.

An expression contains one or more terms with addition, subtraction, multiplication, and division.

We always combine the like terms in an expression when we simplify.

We also keep all the like terms on one side of the expression if we are dealing with two sides of an expression.

Example:

1 + 3x + 4y = 7 is an expression.com

3 + 4 is an expression.

2 x 4 + 6 x 7 – 9 is an expression.

33 + 77 – 88 is an expression.

We have,

Each classroom has 6 rows of 5 desks.

So the total number of desks in one classroom.

= 6 rows x 5 desks per row

= 30 desks

To find the total number of desks in 45 classrooms, we can multiply the number of desks in one classroom by the number of classrooms.

= 30 desks per classroom x 45 classrooms

= 1,350 desks

Therefore,

There are 1,350 desks in 45 classrooms that each have 6 rows of 5 desks.

Learn more about expressions here:

https://brainly.com/question/3118662

#SPJ2

Answer:

B.......................

Answer:

i did this in 8th grade. (I'm homeschooled)

Step-by-step explanation:

Heres the best i got

the fraction of the class that are boys is 4/9. And the fraction of the class that are girls is 5/9.

What is ratio?

A ratio is a comparison of two or more quantities that are related in some way. It expresses the relationship between these quantities in terms of the number of times one quantity contains another. Ratios are usually expressed as a fraction, where the numerator represents the first quantity and the denominator represents the second quantity. For example, the ratio of boys to girls in a class of 40 students may be expressed as 2:3 or 2/3, meaning there are 2 boys for every 3 girls. Ratios can also be expressed in other forms, such as percentages or decimals. Ratios are commonly used in mathematics, science, engineering, and everyday life to compare quantities and make predictions or decisions.

A fraction is a number that represents a part of a whole or a ratio of two quantities. It consists of two numbers, a numerator and a denominator, separated by a line. The numerator represents the number of parts being considered, while the denominator represents the total number of parts in the whole or in the comparison. Fractions are used in many areas, such as mathematics, science, engineering, cooking, and everyday life. They can be added, subtracted, multiplied, and divided, and can be converted to decimals or percentages.

a) The total ratio of boys to girls in the class is 4+5 = 9. Therefore, the fraction of the class that are boys is 4/9.

b) The question is unclear as it seems to be asking for the same answer as in part (a). If you meant to ask for the fraction of the class that are girls, you can use the same approach: the fraction of the class that are girls is 5/9.

To know more about ratio visit :-

https://brainly.com/question/12024093

#SPJ1

Answer:1 and 2

Step-by-step explanation:

so, they asked 50 students and then that was later broke down to smaller groups.

10,15,25

so, for every 10 students will be one. 1 vote= 10 students.

also, the dinosaur had the greatest number of votes so that explains answer 2.

The graph is increasing from 0 minutes to 40 minutes, decreasing from 40 minutes to 80 minutes, and constant from 80 minutes to 200 minutes.

The rate of global warming is increasing. Every year, average global temperatures continue to rise, leading to more extreme weather events and disruptions to the environment. This has been caused by human activities, such as burning fossil fuels, which release carbon dioxide and other greenhouse gases into the atmosphere. These gases trap heat, leading to a rise in temperatures.

The domain of the relation is the set of all time values, ranging from 0 minutes to 200 minutes. The range of the relation is the set of all depth values, ranging from 0 feet to 8 feet.

The graph represents a function because for every value of time, there is exactly one corresponding value of depth.

The graph shows the depth of water in a horse trough over a certain amount of time. The graph starts at 0 feet and increases to a maximum of 8 feet over the first 40 minutes. After 40 minutes, the depth of the water starts to decrease until it reaches a minimum of 2 feet at 80 minutes. After 80 minutes, the depth of the water remains constant at 2 feet until the end of the graph at 200 minutes.

To learn more about increasing

https://brainly.com/question/29258297

#SPJ1

Answer:

20.8

Step-by-step explanation:

Let h be the height of the ladder. We know that the distance BC is 8 ft, and the angle of elevation BAC is 69 degrees. Therefore, we have:

tan(69) = h/8

Multiplying both sides by 8, we get:

8*tan(69) = h

Using a calculator, we get:

h ≈ 20.8 ft

Therefore, the height of the top of the ladder from the ground is approximately 20.8 feet.

Answer:

To find the real and imaginary parts of the complex number 26 = a + bi, we can use the fact that:

a + bi = 26

Taking the complex conjugate of both sides, we get:

a - bi = 26

Adding the two equations, we get:

2a = 52

Solving for a, we get:

a = 26

Substituting this value into one of the equations, we get:

26 + bi = 26

Therefore, b = 0.

Therefore, the real part of 26 is a = 26, and the imaginary part is b = 0.

answer is

512

Step-by-step explanation:

1.6x80=128

128x4=512

Answer:

26° 180 -81 - 73 = 26

Step-by-step explanation:

Answer:

26

Step-by-step explanation:

triangle= 180

81 + 73 = 154

180 - 154= 26

The total distance that the water tanker has covered in March of 2022 is given as follows:

1860 kilometers.

Velocity is given by the change in the distance divided by the change in the time, hence the following equation is built to model the relationship between these three variables:

v = d/t.

The parameters for this problem are given as follows:

Hence the total distance is then obtained as follows:

d = v x t

d = 60 x 31

d = 1860 kilometers.

The complete question is:

"Assuming that the water tanker travels an average of 60 kilometers a day, calculate the total distance that the water tanker has covered in March 2022​".

More can be learned about the relation between velocity, distance and time at https://brainly.com/question/24316569

#SPJ1

let's bear in mind that on the III Quadrant, sine and cosine are both negative, whilst on the IV Quadrant, sine is negative and cosine is positive, that said

[tex]\cos(\alpha )=\cfrac{\stackrel{adjacent}{3}}{\underset{hypotenuse}{5}}\hspace{5em}\textit{let's find the \underline{opposite side}} \\\\\\ \begin{array}{llll} \textit{using the pythagorean theorem} \\\\ a^2+o^2=c^2\implies o=\sqrt{c^2 - a^2} \end{array} \qquad \begin{cases} c=\stackrel{hypotenuse}{5}\\ a=\stackrel{adjacent}{3}\\ o=opposite \end{cases} \\\\\\ o=\pm \sqrt{ 5^2 - 3^2} \implies o=\pm \sqrt{ 16 }\implies o=\pm 4\implies \stackrel{IV~Quadrant }{o=-4} \\\\[-0.35em] ~\dotfill[/tex]

[tex]\tan(\beta )=\cfrac{\stackrel{opposite}{4}}{\underset{adjacent}{3}}\implies \tan(\beta )=\cfrac{\stackrel{opposite}{-4}}{\underset{adjacent}{-3}} \\\\[-0.35em] ~\dotfill\\\\ \tan(\alpha + \beta) = \cfrac{\tan(\alpha)+ \tan(\beta)}{1- \tan(\alpha)\tan(\beta)} \\\\\\ \tan(\alpha + \beta)\implies \cfrac{ ~~\frac{-4}{3}~~ + ~~\frac{-4}{-3} ~~ }{1-\left( \frac{-4}{3} \right)\left( \frac{-4}{-3} \right)}\implies \cfrac{0}{1-\left( \frac{-4}{3} \right)\left( \frac{-4}{-3} \right)}\implies \text{\LARGE 0}[/tex]

Therefore , the solution of the given problem of unitary method comes out to be yields 6 quarts of punch as a result.

This common convenience, already-existing variables, or all important elements from the original Diocesan customizable survey that followed a particular event methodology can all be used to achieve the goal. If it does, there will be another chance to get in touch with the entity. If it doesn't, each of the crucial elements of a term proof outcome will surely be lost.

Here,

The quantity of punch produced by the recipe is:

If the punch bowl has an 8-quart capacity and the recipe fills it 3/4 full.

=> 6 pints =  8 * 3/4.

The formula yields 6 quarts of punch as a result.

Therefore , the solution of the given problem of unitary method comes out to be yields 6 quarts of punch as a result.

To know more about unitary method  visit:

https://brainly.com/question/28276953

#SPJ1  

The range of the function is the set of all real numbers greater than or equal to -2, because the lowest possible value of the function is -2, which occurs at x = 2.

What is a piecewise function ?

A piecewise function is a function that is defined by different equations on different parts of its domain. The graph of a piecewise function consists of several distinct parts, each corresponding to a different equation.

The graph shown is an example of a piecewise function. The function is defined using different equations on different intervals of the domain.

On the interval from negative infinity to negative 2, the function is defined by the equation y = 2. This means that the value of the function is always 2 on this interval, regardless of the value of x.

On the interval from negative 2 to 2, the function is defined by the equation y = -x. This means that the value of the function is equal to the negative of x on this interval.

On the interval from 2 to positive infinity, the function is defined by the equation y = 2. This means that the value of the function is always 2 on this interval, regardless of the value of x.

At the point x = -2, the function experiences a discontinuity, because the two equations that define it have different values at this point. The function is not differentiable at this point, because it does not have a well-defined tangent line.

The domain of the function is the set of all real numbers, because there are no restrictions on the values of x that are allowed.

Therefore, The range of the function is the set of all real numbers greater than or equal to -2, because the lowest possible value of the function is -2, which occurs at x = 2.

To learn more about Piecewise function from given link.

https://brainly.com/question/24031122

#SPJ1

Answer: James' age now is 12 years old.

Answer:

It depends on the context of the problem and the interpretation of the ratio represented by the point (7, 8).

If we interpret the point (7, 8) as representing the ratio 7:8, then Adela's claim is incorrect. Adding the same number to both coordinates of the point would change the value of the ratio. For example, adding 1 to both coordinates would give the point (8, 9), which represents the ratio 8:9, which is not equivalent to 7:8.

However, if we interpret the point (7, 8) as representing a different type of ratio, such as the ratio of the distances from the point to two fixed points or the ratio of the areas of two shapes, then it may be possible to find an equivalent ratio by adding the same number to both coordinates of the point. In this case, Adela's claim could be correct.

Without more information about the context and interpretation of the ratio represented by the point (7, 8), it is difficult to determine the correctness of Adela's claim.

By using chi-squared test, we can conclude that there is evidence of an association between breed and milk yield at the 5% significance level.

What is chi-squared test?

To perform a chi-squared test for independence between breed and milk yield, we need to set up the hypotheses:

Null hypothesis: There is no association between breed and milk yield.

Alternative hypothesis: There is an association between breed and milk yield.

We will use a significance level of 0.05.

To calculate the expected counts for each cell, we will use the formula: (row total x column total) / grand total.

The observed counts and expected counts are:

The grand total is 100.

The degrees of freedom for the test are (number of rows - 1) x (number of columns - 1) = (2 - 1) x (3 - 1) = 2.

Using a chi-squared distribution table or calculator, we find the critical value for a chi-squared test with 2 degrees of freedom and a 0.05 significance level to be 5.99.

To calculate the test statistic, we use the formula:

chi-squared = [tex]sum((observed\ count - expected\ count)^2 / expected\ count)[/tex]

The calculated value of chi-squared is:

[tex]chi-squared = ((32-25.76)^2 / 25.76) + ((20-19.04)^2 / 19.04) + ((16-13.20)^2 / 13.20) + ((10-16.24)^2 / 16.24) + ((18-18.96)^2 / 18.96) + ((4-4.80)^2 / 4.80) = 10.92[/tex]

The degrees of freedom for the test are 2, and the critical value is 5.99.

Since the calculated value of chi-squared (10.92) is greater than the critical value (5.99), we reject the null hypothesis.

Therefore, we can conclude that there is evidence of an association between breed and milk yield at the 5% significance level.

To learn more about chi-squared test visit:

https://brainly.com/question/4543358

#SPJ1