g a positive benedict's test is indicated by the formation of which of the following? a. cu2o b. cu c. cu2 d. metallic mirror

The Fe(OH)₃ solution has a content of 0.304 M.

In this titration, HNO₃ is the acid and Fe(OH)₃ is the base. At the equivalence point, all the H+ ions from the HNO₃ react with all the OH- ions from the Fe(OH)₃ to form water and the salt, Fe(NO₃)₃. We can use the balanced chemical equation for the reaction to determine the stoichiometric ratio of HNO₃ to Fe(OH)₃ and calculate the molarity of Fe(OH)₃.

The balanced chemical equation for the reaction is:

HNO₃ + 3Fe(OH)₃ → Fe(NO₃)₃ + 3H₂O

From the equation, we see that 1 mole of HNO₃ reacts with 3 moles of Fe(OH)₃. Therefore, the number of moles of HNO₃ in the solution can be calculated as:

moles of HNO₃ = Molarity of HNO₃ x Volume of HNO₃ solution in liters

moles of HNO₃ = 0.524 M x (49.2 mL / 1000 mL/L)

moles of HNO₃ = 0.0258 mol

At the equivalence point, the number of moles of Fe(OH)₃ added is equal to the number of moles of HNO₃ in the solution. Therefore, we can calculate the molarity of Fe(OH)₃ as:

Molarity of Fe(OH)₃ = moles of Fe(OH)₃ added / Volume of Fe(OH)₃ solution in liters

Since the volume of the Fe(OH)₃ solution added is 85 mL, or 0.085 L, we can calculate the moles of Fe(OH)₃ as:

moles of Fe(OH)₃ = moles of HNO₃ = 0.0258 mol

Therefore, the molarity of Fe(OH)₃ is

Molarity of Fe(OH)₃ = 0.0258 mol / 0.085 L

Molarity of Fe(OH)₃ = 0.304 M

Thus, the concentration (molarity) of the Fe(OH)₃ solution is 0.304 M, rounded to two decimal places.

To learn more about concentration refer to:

brainly.com/question/10725862

#SPJ4

The salt that would be produced by the reaction of H2SO4 with LiHCO3 is option C-Li2SO4.

Lithium sulfate (Li2SO4) is an inorganic compound with the formula Li2SO4. It is a white crystalline material that is soluble in water. The salt would be produced as a result of the following reaction: H2SO4 + LiHCO3 → Li2SO4 + H2O + CO2.

Lithium carbonate (Li2CO3) would not be produced in this reaction because LiHCO3 reacts with H2SO4 to form Li2SO4. Li2S cannot be produced because it requires Li2S2, which is not one of the reactants or products. LiSO4 is not produced because H2SO4 reacts with LiHCO3 to form Li2SO4 instead. Thus, option (c) Li2SO4 is the correct answer.

Learn more about inorganic compounds here:

https://brainly.com/question/17271491

#SPJ11

Answer: A popular classroom demonstration involves placing a paper cup with water in it on a burner and boiling the water in the cup. Although part of the cup may burn, the part containing the water does not. This is because of the phenomenon of surface tension.

Surface tension is the force that causes the molecules at the surface of a liquid to be attracted to one another, creating a film of molecules across the surface of the liquid. This causes the water molecules to stick together and form a barrier against the heat of the flame, thus protecting the water from the heat.

The water molecules at the surface of the cup create a protective film, allowing the heat of the flame to be distributed evenly throughout the cup. This prevents the water in the cup from boiling and keeps it from burning.

The surface tension phenomenon can also be seen in other forms of liquids such as soaps and detergents. When these liquids are placed in a container and agitated, the molecules form a protective film over the surface of the liquid and prevent it from evaporating.

Surface tension is a fascinating phenomenon that can be seen in everyday life, and it can be used to explain why the paper cup does not burn when placed on a burner.

Learn more about Surface tension here:
https://brainly.com/question/11348644#

#SPJ11

The molecular shape is determined by the number of electron domains around a central atom where an electron domain can be a lone pair, a single bond, or a multiple bond.

The molecular geometry is determined by the type and number of electron domains on the central atom. The electron domain geometry is determined by the number of electron domains around the central atom.

Both the electron and molecular geometry of a compound can be identified using the VSEPR theory (Valence Shell Electron Pair Repulsion). The molecular geometry is determined by the type and number of electron domains on the central atom.

The electron domain geometry is determined by the number of electron domains around the central atom. Electron domains are regions of space around the central atom that contain an electron pair. When lone pairs or multiple bonds are present, these domains are also counted.

The electron domain geometry is the term used to describe the shape of the molecule based on the number of electron domains present on the central atom.

To know more about electrons, refer here:

https://brainly.com/question/29731362#

#SPJ11

It is about to vaporize does not describe the saturated liquid if heat is added to it. Here option B is the correct answer.

A saturated liquid is a liquid that is in equilibrium with its vapor at a given temperature and pressure. If heat is added to a saturated liquid, its temperature will increase while its pressure remains constant until it reaches the saturation temperature. At this point, the saturated liquid will start to vaporize or boil, and the temperature will remain constant until all of the liquid has been converted to vapor.

Option A - "it's about to condense" - is true for a saturated vapor if heat is removed from it. Option C - "it refers to a point on a t-v diagram" - is also true since a saturated liquid corresponds to a point on the liquid-vapor saturation line on a temperature-volume (t-v) diagram.

Option D - "it's still considered a liquid" - is true since the saturated liquid is still in the liquid state even though it is about to vaporize. Option E - "any heat added will cause some of the liquid to vaporize" - is true since any additional heat added to a saturated liquid will cause it to vaporize or boil at a constant temperature and pressure.

To learn more about saturated liquid

https://brainly.com/question/17164330

#SPJ4

Complete question:

Which of the following statement does not describe the saturated liquid if heat is added to it? multiple choice questions.

A - it's about to condense.

B - it is about to vaporize.

C - it refers to a point on a t-v diagram.

D - it's still considered a liquid.

E - any heat added will cause some of the liquid to vaporize.

The mass percent of phenol in the solution is 26.01%.

To calculate the mass percent of phenol in the solution, we need to know the total mass of the solution and the mass of phenol in the solution.

The mass of phenol in the solution can be calculated as follows:

mass of phenol=volume of phenol x density of phenol

mass of phenol = 400.0 ml x 1.070 g/ml

mass of phenol = 428.0 g

The total mass of the solution can be calculated by adding the mass of phenol and the mass of water:

total mass of solution = mass of phenol + mass of water

total mass of solution = 428.0 g + (1217.9 ml x 1.000 g/ml)

total mass of solution = 1645.9 g

Now we can calculate the mass percent of phenol in the solution:

mass percent of phenol = (mass of phenol / total mass of solution) x 100%

mass percent of phenol = (428.0 g / 1645.9 g) x 100%

mass percent of phenol = 26.01%

To now more about mass percent here

https://brainly.com/question/9904990

#SPJ4

Answer: The value of the rate constant at 310.0 K is 54.90 s^-1.

The Arrhenius equation is used to calculate the rate constant of a reaction. It provides a way to relate the temperature of a system to the rate constant of a reaction.

Given the rate constant of a certain first-order reaction, which is 45.9 s^-1 at 300 K, and the energy of activation of 81.0 kJ/mol, we have to calculate the rate constant at 310.0 K.

What is the Arrhenius equation?

The Arrhenius equation is given by: k = Ae^(-Ea/RT)

where: k is the rate constant of the reaction, A is the pre-exponential factor or the frequency factor, Ea is the activation energy, R is the universal gas constant (8.314 J/mol K) T is the temperature in kelvin.

From the given information: k1 = 45.9 s^-1, T1 = 300 K, T2 = 310 K, and Ea = 81.0 kJ/molCalculating the rate constant at 310.0 K using the Arrhenius equation:

k2 = Ae^(-Ea/RT2)

Taking the ratio of the two equations:

k2/k1 = (Ae^(-Ea/RT2))/(Ae^(-Ea/RT1)) k2/k1 = e^(Ea/R) (1/T1 - 1/T2)

Putting in the values:

k2/45.9

= e^ (81000/8.314) (1/300 - 1/310) k2/45.9

= 1.196k2

= 54.90 s^-1

Therefore, the value of the rate constant at 310.0 K is 54.90 s^-1.



Learn more about Arrhenius equation here:
https://brainly.com/question/12907018#



#SPJ11

The mass of the resulting strontium fluoride precipitate is 42.40 grams if a 175.0 ml solution of 2.594 m strontium nitrate is mixed with 215.0 ml of a 3.162 m sodium fluoride solution.

Volume of 2.594 M strontium nitrate = 175.0 mL = 0.175 L

Volume of  3.162 M sodium fluoride = 215.0 mL = 0.215 L

The Molar mass of SrF2 is 125.62 g/mole

Step 2: The balanced equation:

Sr(NO3)2(aq.) + 2NaF(aq.) → SrF2(s) + 2NaNO3(aq.)

From the balanced equation we know that, SrF2 will precipitate, NaNO3 will dissociate in 2Na+ + 2NO3-

The moles Sr(NO3)2 = molarity * volume

Moles Sr(NO3)2 is,

                     =  3.162 M * 0.175 L

                     = 0.553 moles

We have to calculate moles Na F.

moles Na F is,

              = 3.162 M * 0.215 L

              = 0.679 moles

We get that for 1 mole of Sr(NO3)2 we need 2 moles of Na F to produce 1 mole of SrF2 and 2 moles of NaNO3. here Na F is the limiting reactant.

There will Sr(NO3)2 is in excess react 0.553/2 = 0.276 moles which will precipitate.

There will remain 0.553 - 0.276 = 0.277 moles that will not precipitate.

Now we have to calculate moles of SrF2 produced. For 1 mole of Sr(NO3)2 we need 2 moles of Na F to produce 1 mole of SrF2 and 2 moles of NaNO3.

For 0.679 moles of Na F consumed, we produced 0.679/2 = 0.3375 moles of SrF2

Now we have to calculate mass of SrF2 produced

Mass SrF2 = moles SrF2 * molar mass SrF2

Mass SrF2 = 0.3375 moles * 125.62 g/mole

Mass SrF2 = 42.40 grams

The mass of the resulting strontium fluoride precipitate is 42.40 grams.

To learn more about Mass

https://brainly.com/question/1838164

#SPJ4

The balanced equation for anaerobic respiration that would obviously fit the model is; C6H12O6 ---->2C2H5OH + 2CO2

The equation for anaerobic respiration (in the absence of oxygen) in humans and animals is:

Glucose → Lactic Acid + Energy (ATP)

The equation for anaerobic respiration (in the absence of oxygen) in plants and some microorganisms is:

Glucose → Ethanol + Carbon Dioxide + Energy (ATP).

Hence, we can see that this is way that anaerobic respiration occurs.

Learn more about anaerobic respiration:https://brainly.com/question/12605249

#SPJ1

Answer:

8.35 atm.

Explanation:

The given reaction is:

2 CH4 → C2H4 + 2 H2

From the balanced equation, we can see that for every mole of C2H4 produced, 2 moles of H2 are produced.

First, we need to find the number of moles of C2H4 produced:

Molar mass of C2H4 = 2(12.01 g/mol) + 4(1.01 g/mol) = 28.05 g/mol

Number of moles of C2H4 = 11.6 g / 28.05 g/mol = 0.413 mol

Since 2 moles of H2 are produced for every mole of C2H4, the number of moles of H2 produced is:

0.413 mol C2H4 × 2 mol H2 / 1 mol C2H4 = 0.826 mol H2

Now we can use the ideal gas law to find the pressure of H2:

PV = nRT

where P is pressure, V is volume, n is the number of moles, R is the gas constant (0.0821 L·atm/K·mol), and T is temperature in Kelvin.

We are given the volume (2.4 L) and temperature (300 K), and we just calculated the number of moles (0.826 mol). Plugging these values into the ideal gas law:

P × 2.4 L = 0.826 mol × 0.0821 L·atm/K·mol × 300 K

P = (0.826 mol × 0.0821 L·atm/K·mol × 300 K) / 2.4 L

P = 8.35 atm

Therefore, the pressure of hydrogen gas is 8.35 atm.

The mass (in grams) of chlorine present in 400 mL of seawater, given that the density of seawater is 1.025 g/cm3, is 0.008 grams

We'll begin by obtaining the mass of the sea water. Details below:

Density = mass / volume

Cross multiply

Mass = Density × Volume

Mass of sea water = 1.025  × 0.4

Mass of sea water = 0.41 g

Finally, we shall determine the mass of chlorine in the sea water. Details below:

Mass of chlorine = Percentage × Mass of sea water

Mass of chlorine = 1.94% × 0.41

Mass of chlorine = 0.008 grams

Thus, the mass of chlorine is 0.008 grams

Learn more about mass:

https://brainly.com/question/1674804

#SPJ1

The final molar amount of gas present in the container is approximately 2.98 moles.

The initial conditions of the gas are:

n1 = 1.79 moles of nitrogen gas

V1 = 3.0 L

P = constant

The final conditions of the gas are:

V2 = 5.0 L

n2 = ?

Since pressure is constant, we can use the combined gas law to find the final amount of gas:

(P1V1)/n1 = (P2V2)/n2

Plugging in the values we know:

(P1)(3.0 L)/(1.79 mol) = (P2)(5.0 L)/n2

Solving for n2:

n2 = (P2)(5.0 L)/(P1)(3.0 L/1.79 mol)

Since the pressure is constant, we can cancel it out:

n2 = (5.0 L)/(3.0 L/1.79 mol)

n2 = 2.98 mol

Learn more about gas law

https://brainly.com/question/27009857

#SPJ4

Full Question: 1.79 moles of nitrogen gas are contained in a 3.0 L container. if pressure is kept constant, what is the final molar amount of gas present in the container if gas is added until the volume has increased to 5.0L?

The concentration of glycine in the given solution is 0.066 M.

Concentration is defined as the amount of solute per unit volume of the solution.

Thus, the formula for calculating the concentration (C) of a solution is:

C = n/V

Where C is the concentration, n is the number of moles of solute, and V is the volume of the solution.

The formula for calculating the number of moles of a solute is given as:

m = n x M

Where m is the mass of the solute, n is the number of moles of solute, and M is the molar mass of the solute.

Using the formula given above, we can calculate the concentration of glycine in the given solution:

C = m/M x V

We know that the mass of glycine is 15.0 g and its molar mass is M(C₂H₅NO₂) = 75.07 g/mol

Substituting the given values, we get:

C = 15.0/75.07 × 0.330L= 0.066 M

Therefore, the concentration of a solution containing 15.0 g of glycine, C₂H₅NO₂, in a total solution volume of 0.330 l is 0.066 M.

To know more about concentration, refer here:

https://brainly.com/question/10725862#

#SPJ4

Answer : The molecular formula for this compound is C7H14

To determine the molecular formula of the compound, we need to first calculate its empirical formula using the given mass percentages of carbon and hydrogen. The mass percent of carbon in the compound is: (3.140 g / 3.742 g) x 100% = 83.9%

The mass percent of hydrogen in the compound is: (0.602 g / 3.742 g) x 100% = 16.1%. Assuming a 100 g sample of the compound, we can calculate the masses of carbon and hydrogen in the sample: Mass of carbon = 83.9 g and Mass of hydrogen = 16.1 g

Next, we need to convert these masses to moles, using the atomic masses of carbon and hydrogen:1 mol C = 12.01 g, 1 mol H = 1.008 g. Moles of carbon = 83.9 g / 12.01 g/mol = 6.983 mol, Moles of hydrogen = 16.1 g / 1.008 g/mol = 15.95 mol. Dividing each mole value by the smallest mole value, we get the following mole ratio: C:H = 6.983 / 6.983 = 1.000 : 2.285

The empirical formula for the compound is therefore CH2. To determine the molecular formula, we need to find the molecular weight of the empirical formula, and then divide the given molar mass by this value to get the molecular formula multiplier. Molecular weight of CH2 = 12.01 + 2(1.008) = 14.026 g/mol, Molecular formula multiplier = 100.2 g/mol / 14.026 g/mol = 7.146. Multiplying the empirical formula by this multiplier, we get the molecular formula: C7H14

Know more about empirical formula here:

https://brainly.com/question/14044066

#SPJ11

The final pressure and temperature are 1.131 atm and (0.9786 mol/ 0.8546 mol).

A chemical equation serves as a metaphor for the transformation of reactants into products. Iron sulfide, for instance, is created when iron (Fe) and sulfur (S) mix (FeS). Fe(s) + S(s) = FeS (s) Iron reacts with sulfur, as indicated by the + sign.

For the complete combustion of butane, the following chemical equation is balanced:

2C4H10 + 13O2 → 8CO2 + 10H2O

mass of butane = (number of moles of butane) x (molar mass of butane)

= (number of moles of oxygen) x (molar mass of oxygen)

= (mass of oxygen) / (molar mass of oxygen) x (molar mass of butane)

The mass of oxygen can be calculated from the ideal gas law:

PV = nRT

n = PV / RT

The amount of moles of oxygen can be determined using this equation with P = 1 atm, V = 5 L, and T = 500 K:

n = (1 atm) x (5 L) / [(0.08206 L atm mol⁻¹ K⁻¹) x (500 K)]

= 0.1222 mol

The mass of butane is:

mass of butane = (0.1222 mol) x (58.12 g/mol)

= 7.11 g

Before the reaction, there were n = 0.1222 mol (butane) + (13/2) x 0.1222 mol moles of gas in the vessel (oxygen)

= 0.8546 mol

The balanced equation:

n = (8/2) x 0.1222 mol (carbon dioxide) + (10/2) x 0.1222 mol (water vapor)

= 0.9786 mol

Solving for P2, we get:

P2 = (n2 / n1) x (T1 / T2) x P1

= (0.9786 mol / 0.8546 mol) x (500 K / T2) x (1 atm)

= 1.131 atm

Solving for T2, we get:

T2 = (n2 / n1) x (P1 / P2) x T1

= (0.9786 mol / 0.8546 mol)

To know more about final pressure visit:-

https://brainly.com/question/30862968

#SPJ1

Question:

A vessel contains a stoichiometric mixture of butane and air. The vessel is at a temperature of 500 K, a pressure of 1 atm, and has a volume of 5 L. If the reaction goes to completion, what volume of gas will be present in the vessel after the reaction and what will be the final pressure and temperature? Assume ideal gas behavior and that the reaction occurs with complete combustion.

The correct statement is option B - A redox reaction involves either the transfer of an electron or a change in oxidation state of an element.Redox reactions involve the transfer of electrons from one substance to another.

The term "redox" refers to the simultaneous oxidation and reduction of molecules in the reaction, with one molecule losing electrons and the other gaining electrons.

Redox reactions is:Oxidation: Loss of electronsReduction: Gain of electrons. A molecule or atom that loses electrons is said to be oxidized, while one that gains electrons is said to be reduced.

The oxidized substance is an oxidizing agent, while the reduced substance is a reducing agent.

The statement "A redox reaction involves either the transfer of an electron or a change in oxidation state of an element" is true as the redox reaction involves both reduction and oxidation reactions.

Any substance that is oxidized should be reduced by another substance, and vice versa. Thus, a redox reaction involves the transfer of electrons from one substance to another.

Although oxygen is often present in redox reactions, it is not a necessary component of them. So, the statement C is false, and oxidation can not occur independently of reduction, so the statement A is false too.

The reducing agent reduces another substance and is itself oxidized; thus, statement D is also true.

to know more about redox reaction refer here:

https://brainly.com/question/13293425#

#SPJ11

Friedel crafts acylation is preferred over Friedel craft alkylation. Friedel crafts acylation reactions have many benefits as compared to Friedel crafts alkylation reactions.

Friedel-Crafts acylation and Friedel-Crafts alkylation reactions are both types of electrophilic substitution reactions that involve the formation of carbocations as intermediates. However, acylation is preferred over alkylation in certain situations.

Here are some benefits of Friedel-Crafts acylation reactions compared to Friedel-Crafts alkylation reactions:

1. Friedel-Crafts acylation reactions produce pure compounds as their major products because they do not involve any byproducts like Friedel-Crafts alkylation reactions.

2. The yields of Friedel-Crafts acylation reactions are often higher than those of Friedel-Crafts alkylation reactions.

3. Friedel-Crafts acylation reactions are more selective than Friedel-Crafts alkylation reactions because the acyl group is a better electrophile than the alkyl group.

4. The carbonyl group in the acylating agent (usually an acid chloride) can be selectively protected or modified using a variety of functional groups without affecting the aromatic ring. This is not possible in Friedel-Crafts alkylation reactions.

5. Friedel-Crafts acylation reactions can be carried out with a wider range of substrates (such as anisole or benzene) than Friedel-Crafts alkylation reactions.

6. The products of Friedel-Crafts acylation reactions are often more reactive than the starting materials, which allows for further functionalization or modification of the aromatic ring.

Learn more about Friedel-Crafts reaction - https://brainly.com/question/30861499#

#SPJ11

It will take 3401 seconds for 0.1% of the reactant to remain.  

The half-life of a zero-order reaction is the time taken for the concentration of the reactant to decrease by half. This can be calculated using the equation:


t1/2 = 0.693/k


Where k is the rate constant of the reaction. The amount of time it takes for 0.1% of the reactant to remain, we can use the following equation:


t = (-log(0.001))/k


The rate constant of the reaction can be calculated as:


k = 0.693/t1/2 = 0.693/350 = 0.001988  

t = (-log(0.001))/k = (-log(0.001))/0.001988 = 3401 seconds  


Therefore, it will take 3401 seconds for 0.1% of the reactant to remain.  

to know more about reactant refer here:

https://brainly.com/question/17096236#

#SPJ11

The thermodynamic process that occurs during the adhesive crosslink process is exothermic.

During the adhesive crosslink process, the adhesive undergoes a chemical reaction that forms covalent bonds between the adhesive molecules. This chemical reaction releases energy in the form of heat, which is known as an exothermic process. As the adhesive crosslinks, the material becomes more rigid and gains strength, which is why this process is often used to create strong bonds in materials.

This process can be detected by monitoring the temperature changes in the adhesive during the crosslink process. As the adhesive undergoes crosslinking, the temperature of the material will increase due to the release of heat energy. This increase in temperature can be measured using a thermocouple or other temperature sensing device.

In addition, the chemical structure of the adhesive can also be analyzed to confirm that crosslinking has occurred. Techniques such as Fourier transform infrared spectroscopy (FTIR) can be used to detect changes in the chemical bonds of the adhesive, which can indicate the formation of new covalent bonds between adhesive molecules.

For more similar questions on "Thermodynamics",

pbrainly.com/question/21858980

#SPJ11

Two elements, sodium (Na) and chlorine (Cl) come together, they form a compound called sodium chloride (NaCl), which is also known as table salt.

Table salt is that it is a chemical ionic compound made up of sodium and chlorine atoms that are bonded together.

Table salt is one of the most common chemical compounds found on earth. It is a white, crystalline substance that is highly soluble in water. It is used in many ways, including cooking, preserving food, and as a seasoning.

Table salt has a number of properties that make it useful in various applications. It is highly reactive with other chemicals, which makes it a good cleaning agent.

It is also highly conductive, which makes it useful in electrochemical applications. Additionally, it is non-toxic, which makes it safe to use in food applications.

Learn more about table salt here:

https://brainly.com/question/5528908

#SPJ11

Carbon and other types of matter can move through the environment through a combination of physical, biological, and human processes.

Matter, including carbon, can move through an environment in several ways, including:

Diffusion: Diffusion is the movement of particles from an area of high concentration to an area of low concentration. Carbon can diffuse through the air or water from areas where it is more concentrated to areas where it is less concentrated.

Advection: Advection is the movement of matter due to the flow of a fluid, such as air or water. Carbon can be transported through the environment by advection, for example, by wind carrying carbon particles or by water currents transporting dissolved carbon.

Biogeochemical cycling: Carbon can also be cycled through the environment by biological and geological processes. Plants and algae take up carbon dioxide from the air or dissolved carbon from water and convert it into organic matter through photosynthesis. This organic matter can then be consumed by other organisms, leading to the transfer of carbon through the food chain. Carbon can also be stored in soils and sediments for long periods of time.

Human activities: Human activities can also move carbon through the environment. For example, the burning of fossil fuels releases carbon dioxide into the atmosphere, which can then be transported by diffusion and advection. Land-use changes, such as deforestation, can also affect the cycling of carbon through the environment.

Learn more about matter here: https://brainly.com/question/3998772

#SPJ1

The moles of tertiary-butyl chloride present are 0.065 moles.

To calculate the number of moles of tert-butyl chloride involved in Friedel-Crafts alkylation, we will use the following formula:

Number of moles = Mass / Molar mass

The molar mass of tert-butyl chloride = 92.57 g/mol

The volume of tert-butyl chloride = 7.1 ml

Using the density of tertiary-butyl chloride, we can convert the volume into mass.

The density of tertiary-butyl chloride is 0.853 g/ml.

Therefore, Mass of tert-butyl chloride = 7.1 ml × 0.853 g/ml = 6.05g

Substituting the values in the formula:

The number of moles = 6.05 g / 92.57 g/mol= 0.065 moles

Therefore, 0.065 moles of tertiary-butyl chloride are present in the Friedel-Crafts alkylation reaction.

To know more about tertiary-butyl chloride, refer here:

https://brainly.com/question/2273070#

#SPJ4

Explanation:

25 g   *   (100 - 25 ) C  *  4.184  J / (g C)  = 7845 J

Answer:

610 k because is the hollwsphere is the gasis and 1 kpa of helium

The four traditional meteorological seasons, which are based on the annual temperature cycle and the location of the Earth in its orbit around the sun, split the year into four seasons of three months each. The following describes these seasons:

Here are two reasons why meteorological seasons were needed:

Consistency: Based on the annual temperature cycle, meteorological seasons offer a consistent method of dividing the year into four separate times. This makes it simple to compare weather patterns from one year to the next and to monitor long-term weather pattern changes over time.

Ease of communication: By dividing the year into four seasons based on set calendrer months, it is simpler for people to discuss the weather and make appropriate plans for their daily activities. Because January falls within the winter season according to the meteorological calendar, it is simple to know what kind of weather to anticipate when someone states, "I'm going skiing in January."

Learn more about meteorological ,

https://brainly.com/question/14243944

#SPJ4

0.1503 grams is the approximate mass of the CCl4 sample.

We can use Avogadro's number to solve this problem:

1 mole of any substance contains 6.02 x 10^23 particles

Therefore, the number of moles of CCl4 in the sample is:

5.90 x 10^20 particles / 6.02 x 10^23 particles per mole = 0.000978 moles

The molar mass of CCl4 is approximately 153.82 g/mol. Therefore, the mass of the sample is:

0.000978 moles * 153.82 g/mol = 0.1503 g

Therefore, the mass of the sample of CCl4 with 5.90 x 10^20 particles is approximately 0.1503 grams.

Learn more on Avogadros number here: https://brainly.com/question/14876640

#SPJ1

Answer:  A newly discovered amino acid could act as a buffer at pH values within the range of its two ionizable forms, pk1 and pk2.



The newly discovered amino acid can act as a buffer within the pH range between its two ionizable forms. An amino acid contains two functional groups; the amino group (-NH2) and the carboxyl group (-COOH).

These two groups of atoms, being acidic and basic respectively, behave like a weak acid and a weak base. Consequently, the amino acid solution can function as a buffer at the pH value equal to the sum of the two pKa values.

The pKa of the amino group is known as pk1, and the pKa of the carboxyl group is known as pk2. The pKa of an acid is the pH at which half the acid is ionized and half is not. In other words, pKa is a measure of the acidity of an acid. The lower the pKa, the stronger the acid is.

When the pH is equal to the pKa value of the amino acid, the concentration of acid and conjugate base will be the same. When the pH is one unit higher than the pKa value, the proportion of basic form increases by tenfold compared to the acidic form.

When the pH is one unit lower than the pKa value, the concentration of acidic form is tenfold greater than the concentration of basic form.

Therefore, a newly discovered amino acid could act as a buffer at pH values within the range of its two ionizable forms, pk1 and pk2.

The pH range over which buffering is most effective is between pk1 and pk2. The pKa values of an amino acid will determine the range of pH values over which it can act as a buffer.

Learn more about acidic solution here:

https://brainly.com/question/28580519#

#SPJ11

The rate of the reaction between chlorocyclopentane and sodium hydroxide will increase when the concentration of chlorocyclopentane is tripled and the concentration of sodium hydroxide remains the same.

This is due to the fact that increasing the concentration of a reactant increases the frequency of collisions between particles of the reactants, resulting in a higher reaction rate.

When a reactant's concentration is increased, the number of molecules or atoms per unit volume also increases. As a result, the frequency of collisions between the reactant particles increases.

The greater the frequency of collisions between the reactant particles, the greater the chance of a successful reaction, thus increasing the reaction rate.

When the concentration of one of the reactants is increased and the concentration of the other reactant remains the same, the reaction rate increases.

To know more about chlorocyclopentane  click on below link:

https://brainly.com/question/14751180#

#SPJ11

The compound(s) that can be used at high concentrations to dampen out electrostatic interactions among amino acid residues are usually small neutral molecules such as glycerol, acetic acid, and ethylene glycol.

Electrostatic interactions between amino acid residues are often stabilized by hydrogen bonds and other covalent interactions. These interactions are sensitive to the surrounding environment and can be disrupted or dampened when exposed to compounds at high concentrations. Small neutral molecules, such as glycerol, acetic acid, and ethylene glycol, can effectively dampen out electrostatic interactions between amino acid residues, allowing them to retain their native conformation.

To know more about electrostatic interactions click on below link :

https://brainly.com/question/29158172#

#SPJ11

The best choice to favor elimination over substitution in a reaction with 2-bromopropane is sodium tert-butoxide. This is because this reagent is a stronger base, allowing for the deprotonation of 2-bromopropane.

The reaction of 2-bromopropane most favors elimination over substitution when reacted with the sodium tert-butoxide favors elimination over substitution in a reaction with 2-bromopropane.

In organic chemistry, substitution reaction occurs when an atom or a group of atoms in a molecule is replaced by another atom or a group of atoms. In contrast, elimination reactions occur when atoms or groups of atoms are removed from a molecule. The most significant difference between the two is that one leaves another behind. This means that if one group is substituted by another, then it results in a completely different compound than before.

In the reaction between 2-bromopropane and sodium tert-butoxide, the sodium tert-butoxide (Na + OC(CH3)3) serves as a strong base. The tert-butoxide ion, as a strong base, abstracts a hydrogen ion from a carbon adjacent to the bromine, leading to the formation of a reactive alkene intermediate.

The elimination of HBr from 2-bromopropane to form propene is made possible by this alkene intermediate. Therefore, the reaction most favors elimination over substitution when reacted with sodium tert-butoxide.

For more such questions on sodium tert-butoxide , Visit:

https://brainly.com/question/29742455

#SPJ11