I need help with this please

The new length of the rectangle is approximately 2.29 units. We use the formula for the area of a rectangle to solve for the new length, given the new width.

If the width and length of a rectangle are 3 and 8, respectively, and the width is increased to 10.5, we can calculate the new length of the rectangle using the formula for the area of a rectangle, which is length multiplied by width.

The original area of the rectangle is 3 x 8 = 24 square units. If we increase the width to 10.5, the new area of the rectangle becomes: 10.5 x length = 24 Solving for the length, we get: length = 24/10.5 = 2.29 (rounded to two decimal places)

It's important to note that changing one dimension of a rectangle can affect the other dimension, especially if we want to maintain the same area.

Learn more about rectangle here:

https://brainly.com/question/27722891

#SPJ4

The probability that the proportion of persons with a retirement account in a random sample of size 555 differs from the population proportion by less than 5% is approximately 0.8327.

We need to make some assumptions about the population proportion of persons with a retirement account and the standard deviation of the sampling distribution of sample proportions. Let's assume that the population proportion is p = 0.5 (i.e., half of the population has a retirement account) and that the standard deviation of the sampling distribution is given by:

σ = sqrt((p*(1-p))/n)

where n is the sample size.

Substituting the values given in the question, we have:

σ = sqrt((0.5*(1-0.5))/555) = 0.0258

To find the probability that the sample proportion differs from the population proportion by less than 5%, we need to find the probability that the absolute difference between the sample proportion and the population proportion is less than 0.05. This can be written as:

P(|p_hat - p| < 0.05)

where p_hat is the sample proportion.

We can standardize this expression by subtracting the population proportion from both sides and dividing by the standard deviation:

P(|p_hat - p|/σ < 0.05/σ)

P(-0.97 < Z < 0.97)

where Z is a standard normal variable. We can find this probability using a standard normal table or a calculator:

P(-0.97 < Z < 0.97) = 0.8327

Rounding to four decimal places, we have:

P(|p_hat - p| < 0.05) = 0.8327

Therefore, the probability that the proportion of persons with a retirement account in a random sample of size 555 differs from the population proportion by less than 5% is approximately 0.8327.

Learn more about  probability

https://brainly.com/question/30034780

#SPJ4

Answer:33

Step-by-step explanation:45-12=33

The given equation is 7(x+4) = -21 . Therefore, the value of x is 7

In mathematics, an equation is a formula that connects two expressions with the equal sign = to indicate that they are equal. An equation is made up of two expressions joined by an equal sign ("="). Expressions for both sides of the equals sign are called the "left side" and the "right side" of the equation. Many times the right side of the equation is assumed to be zero. Assuming this does not reduce generality, this can be achieved by subtracting the right side from both sides.

According to the Question:

The given equation is:

   7(x+4)= -21

⇒ 7x + 28 = -21

⇒ 7x = -49

⇒ x = 7

Complete Question:

Solve the Equation : 7(x+4)= -21

Learn more about Equation:

https://brainly.com/question/29273511

#SPJ4

Answer:

Step-by-step explanation:

Let's call the length of the shorter leg of the isosceles trapezoid "a" and the length of the longer leg "b".

From the problem, we know that:

a = 0.1x - 0.5 (length of one leg is 0.1.x - 0.5 meters)

b = 0.3x - 2.1 (length of the other leg is 0.3.x-2.1 meters)

Since we know that the trapezoid is isosceles, we know that a = b. So we can set the two expressions equal to each other:

0.1x - 0.5 = 0.3x - 2.1

Now we can solve for x:

0.2x = 1.6

x = 8

Now that we know x, we can substitute it back into the expressions for a and b to find their lengths:

a = 0.1(8) - 0.5 = 0.3 meters

b = 0.3(8) - 2.1 = 0.3 meters

Therefore, each of the legs of the solar panel are 0.3 meters long.

Alexis has 12 quarters and 8 dimes.

Let's use d to represent the number of dimes and q to represent the number of quarters. We know that Alexis has a total of 20 coins, so d + q = 20.

We also know that the value of these coins is $3.80. Since dimes are worth $0.10 and quarters are worth $0.25, we can write an equation for the total value in cents:

10d + 25q = 380

To make things easier, let's divide both sides of the equation by 5:

2d + 5q = 76

Now we can use the first equation to solve for d in terms of q:

d + q = 20

d = 20 - q

Substituting this into the second equation gives:

2(20 - q) + 5q = 76

Expanding the parentheses and simplifying, we get:

40 - 2q + 5q = 76

3q = 36

q = 12

Therefore, Alexis has 12 quarters. We can check this by plugging q back into the first equation to find that she has 8 dimes as well:

d + q = 20

d + 12 = 20

d = 8

The total value of 12 quarters and 8 dimes is:

12 quarters x $0.25 per quarter + 8 dimes x $0.10 per dime = $3.00 + $0.80 = $3.80


To know more about quarters and dimes refer here:

https://brainly.com/question/6500943#

#SPJ11

The speed of the particle is 8 m/s, the force of resistance is [tex]0.3(8)^2[/tex], or 19.2 N.

A particle of mass 1.2 kg is moving with a speed of 8 m/s in a straight line on a horizontal table. A resistance force is applied to the particle in the direction of the motion. The magnitude of the force is proportional to the square of the speed, such that [tex]F=0.3v^2[/tex]

The force of resistance is an opposing force that acts to reduce the speed of the particle. As the particle moves faster, the resistance force increases. The force is proportional to the square of the speed, meaning that if the speed doubles, the force is multiplied by four. The force is also in the same direction as the motion, meaning that it will reduce the speed of the particle.

The equation for the force of resistance is [tex]F=0.3v^2[/tex], where v is the speed of the particle. Therefore, if the speed of the particle is 8 m/s, the force of resistance is [tex]0.3(8)^2,[/tex] or 19.2 N. This means that the force of resistance acting on the particle is 19.2 N.

for such more question on resistance

https://brainly.com/question/28135236

#SPJ11

8. Spread = SD = sqrt(2*df)

9. The difference between the observed and expected frequencies of the outcomes of a set of events or variables.

10. Degrees of 1 freedom does the chi-square distribution.

11.  The rule of thumb for all expected counts in a chi-square goodness of fit test is expected counts must be at least 5.

8. Describe the center and spread of the chi-square distributions.

Shape - skewed right because can't be zero

µ = df = tipping point

mode = df - 2 = peak

spread = SD = sqrt(2*df)

9. Chi-square test is a non-parametric test (a non-parametric statistical test is a test whose model does not specify conditions about the parameter of the population from which the sample is drawn.). It is used for identifying the relationship between a categorical variable and denoted by χ2.

10. A chi-squared distribution constructed by squaring a single standard normal distribution is said to have 1 degree of freedom. Thus, as the sample size for a hypothesis test increases, the distribution of the test statistic approaches a normal distribution.

11. The rule of thumb for all expected counts in a chi-square goodness of fit test is expected counts must be at least 5.

Learn more about Chi- square distribution at:

https://brainly.com/question/30259945

#SPJ4

The solution of the match is

(1) Orthocenter          (C) The point at which the altitudes of a triangle                                                

                                              meet.

(2) Centroid                 (D) The point at which the medians of a triangle

                                             meet.

(3) Circumcenter         (A) The point of intersection of the perpendicular                  

                                             bisectors of the sides of a triangle.

(4) Incentre                 (B) The point at which the three angle bisectors      

                                             of a triangle meet.

The orthocenter of a triangle is the point where the altitudes of the triangle intersect. The orthocenter is not always inside the triangle, and in some cases, it may lie outside the triangle.

The centroid of a triangle is the point where the three medians of the triangle intersect. The centroid is always inside the triangle, and it is also the center of mass of the triangle.

The circumcenter of a triangle is the point where the perpendicular bisectors of the sides of the triangle intersect.  The circumcenter is not always inside the triangle, and in some cases, it may lie outside the triangle.

The incentre of a triangle is the point where the three angle bisectors of the triangle intersect. The incentre is always inside the triangle, and it is also the center of the circle that is inscribed inside the triangle.

To know more about triangle here

https://brainly.com/question/8587906

#SPJ4

Complete Question:

Match the following.

(1) Orthocenter         (A) The point of intersection of the perpendicular                  

                                             bisectors of the sides of a triangle.

(2) Centroid                 (B) The point at which the three angle bisectors of

                                             a triangle meet.

(3) Circumcenter         (C) The point at which the altitudes of a triangle

                                              meet.

(4) Incentre                 (D) The point at which the medians of a triangle

                                             meet.

Since GM is tangent tο circle O at pοint G, the intercepted arc GE has measure zerο. ,then ∠SGM = 84°.

Secant line is alsο knοwn as average rate οf change οf functiοns between twο pοints and alsο called slοpe.

the tangent line is perpendicular tο the radius that passes thrοugh the pοint οf tangency. Therefοre, we have:

m∠MGS = 90°

Alsο, we knοw that the measure οf an angle fοrmed by a tangent line and a secant line that intersect οutside the circle is half the difference οf the intercepted arcs.

m∠SGM = 1/2 (mSE - mGE)

where SE is the intercepted arc by secant GS, and GE is the intercepted arc by tangent GM.

Since GM is tangent tο circle O at pοint G, the intercepted arc GE has measure zerο.

mSE = 2mGS

mSE = 2(84°) = 168°

m∠SGM = 1/2 (mSE - mGE) = 1/2 (168° - 0°) = 84°

Therefοre, m∠SGM = 84°.

To knοw more about secant line visit,

https://brainly.com/question/14438198

#SPJ1

When researching a population where it is impossible or impractical to compile a list of the elements, the sampling technique that is appropriate to use is known as the cluster sampling technique

Cluster sampling is a type of probability sampling that is frequently used when the population is too large to be measured as a whole. The population is divided into smaller, more manageable clusters that are less difficult to study than the entire population.Therefore, cluster sampling is an excellent alternative when the target population cannot be measured because it is too large, too vast, or too hard to reach. In this technique, clusters are chosen by a random process or some other procedure.The final sampling method is achieved by selecting samples from within the clusters, which are frequently chosen using simple random sampling or some other appropriate method. When it comes to cluster sampling, it's important to remember that the clusters chosen must be heterogeneous internally but homogeneous externally.

Learn more about cluster sampling technique:https://brainly.com/question/11003935

#SPJ11

Answer:

Step-by-step explanation:

asdf

The twο pοssible values οf ∠R tο the nearest 10th οf a degree are 33.6° and 326.4°.

A triangle is a clοsed twο-dimensiοnal geοmetric shape with three straight sides and three angles. It is the simplest pοlygοn, which is a flat shape cοnsisting οf straight lines.

We can use the Law οf Cοsines tο find the length οf side QR:

[tex]c^2 = a^2 + b^2 - 2ab[/tex] cοs(C)

where c is the length οf side QR, a is the length οf side PQ (which is unknοwn), b is the length οf side PR (which is 7.8 cm), and C is the angle οppοsite side c (which is 30°). Substituting the given values, we get:

[tex]QR^2 = PQ^2 + 7.8^2 - 2(PQ)(7.8)cos(30^\circ )[/tex]

[tex]QR^2 = PQ^2 + 60.84 - 7.8PQ[/tex]

Next, we can use the Law οf Sines tο relate the length οf side PQ tο the angle οppοsite it, ∠P:

PQ/sin(30°) = QR/sin(P)

PQ = QR(sin(30°)/sin(P))

Substituting this expressiοn fοr PQ intο the equatiοn fοr [tex]QR^2[/tex] abοve, we get:

[tex]QR^2 = [QR(sin(30^\circ)/sin(P))]^2 + 60.84 - 7.8[QR(sin(30^\circ)/sin(P))][/tex]

Simplifying and rearranging, we get a quadratic equatiοn in terms οf QR:

[tex]QR^2 - 3.9QR + 28.99 = 0[/tex]

Using the quadratic fοrmula, we find that:

QR ≈ 7.466 cm οr QR ≈ 3.866 cm

Since we knοw that QR < PQ + PR = 6 + 7.8 = 13.8, the οnly valid sοlutiοn is QR ≈ 7.466 cm. Therefοre, we have:

[tex]cos(R) = (PQ^2 + QR^2 - PR^2)/(2PQQR)[/tex]

[tex]cos(R) = (PQ^2 + 7.466^2 - 7.8^2)/(2PQ(7.466))[/tex]

[tex]cos(R) = (PQ^2 - 4.928)/[2PQ(7.466)][/tex]

Since cοs(R) ≤ 1, we have:

[tex]PQ^2 - 4.928 ≤ 2PQ(7.466)[/tex]

Sοlving fοr PQ using the quadratic fοrmula, we get:

PQ ≤ 5.474 cm οr PQ ≥ 20.032 cm

Since PQ < PR, the οnly valid sοlutiοn is:

PQ ≈ 5.474 cm

Nοw we can use the Law οf Cοsines again tο find ∠R:

[tex]cos(R) = (PQ^2 + PR^2 - QR^2)/(2PQPR)[/tex]

[tex]cos(R) = (5.474^2 + 7.8^2 - 7.466^2)/(2(5.474)(7.8))[/tex]

cοs(R) ≈ 0.828

R ≈ 33.6° οr R ≈ 326.4°

Therefοre, the twο pοssible values οf ∠R tο the nearest 10th οf a degree are 33.6° and 326.4°.

To learn more about triangle from the given link:

https://brainly.com/question/2773823

#SPJ1

Answer:

Diameter is equal to twice the radius. Given, radius is 4 cm. Diameter = 2(4) = 8 cm. Hence, diameter of the circle with radius as 4 cm is 8 cm.

Step-by-step explanation:

please

give brianliest

Answer: Area = 0

Step-by-step explanation:

((2*2)*3.14)-(4*3.14) = 0

0.4

The probability that an undergraduate business major intends to attend classes full-time in pursuit of an MBA degree depends on the individual student's preferences and situation. Generally speaking, studies have shown that about 40% of undergraduate business majors choose to pursue an MBA degree full-time after graduating. Therefore, the probability of an undergraduate business major pursuing an MBA degree full-time can be estimated at 0.4.

Learn more about probability.

brainly.com/question/30034780

#SPJ11

Therefore , the solution of the given problem of unitary method comes out to be hourly salary of $144, or 12 times the average hourly wage of $12 for phone reps.

This common convenience, already-existing variables, or all important elements from the original Diocesan adaptable study that followed a particular methodology can all be used to achieve the goal. Both of the crucial elements of a term affirmation outcome will surely be missed if it doesn't happen, but if it does, there will be another chance to get in touch with the entity.

Here,

The formula below can be used to determine the ideal amount of phone representatives:

=>  MR = MC

Where n is the amount of phone reps and 12 is their hourly wage, the cost is given by C = 12n.

The following results are obtained by taking the derivative of revenue and cost with regard to n:

=> MR=dR/dn = k

=>  dC/dn = 12 for MC.

When we set MR equal to MC, we obtain:

=> k = 12

Accordingly, Vi should hire as many phone representatives as are required to produce an hourly salary of $144, or 12 times the average hourly wage of $12 for phone reps.

To know more about unitary method  visit:

https://brainly.com/question/28276953

#SPJ1  

The total number of hours is 30 hours as the sum of 7/8 and 3/8 comes out to be 30 hours.

1) We know that there is a total of 24 hours in a day.

therefore, 7/8 hours of Wednesday =

number of hours in a day = 24

number of hours every Wednesday = 7/8

= 7/8 x 24 hours

= 7 x 3 hours

= 21 hours

7/8 hours every Wednesday means 21 hours every Wednesday.  

2) We know that there are a total of 24 hours in a day;

therefore, 3/8 hours of Friday =

number of hours in a day = 24

number of hours every Friday = 3/8

= 3/8 x 24 hours

= 3 x 3 hours

= 9 hours

3/8 hours every Friday means 9 hours every Friday.

therefore, the total number of hours = 21 + 9 = 30

The total number of hours is 30 hours as the sum of 7/8 and 3/8 comes out to be 30 hours.

To learn more about sum, click here:

brainly.com/question/29034036

#SPJ4

Answer:

(2, 180)

Step-by-step explanation:

w(x)=-5x^2+20x+160

a=-5 b=20

x=-20/2x(-5)

x=2

w(2)=180

2, 180

Answer:

£164.50

Step-by-step explanation:

If the discount is 6%, then the discounted price is 94% of the original price.

95% of £175 = 0.94 × £175 = £164.50

Answer:

i don't know i haven't done integers in a long time

Step-by-step explanation:

The model will be as follows: y = b0 + b1x1 + b2x2 + u

To write a model that allows the variance of u to differ between men and women, the best option is to use the heteroscedasticity model. This model will enable the variances to differ between the genders without depending on other factors.

The model will be as follows: y = b0 + b1x1 + b2x2 + u, Where y = dependent variable, b0 = constant or intercept, b1 and b2 are the coefficients for the independent variables x1 and x2, u = error term for the model. However, this model does not allow the variance of u to differ between men and women.

To achieve this, we need to modify the model to allow the variance of u to differ between men and women. This can be done by using the weighted regression model. The model will be as follows: y = b0 + b1x1 + b2x2 + u, where y = dependent variable, b0 = constant or intercept, b1 and b2 are the coefficients for the independent variables x1 and x2, u = error term for the model.

The weights can be represented as: wi = 1/σ^2i, where: wi = weight for observation, iσi = standard deviation of the ith observation. This model will allow the variance of u to differ between men and women without depending on other factors.

To know more about variance refer here:

https://brainly.com/question/13708253

#SPJ11

Answer:

33

Step-by-step explanation:

43-10=33 sarah has 33 bananas ledt

If you want each character to be approximately one inch in size, you would use a point size of 72 pts.

Point size is a unit of measurement used to determine the size of typefaces. It represents the height of the characters in a font. One point is equal to 1/72 of an inch, which means there are 72 points in one inch.

Therefore, if you want each character to be approximately one inch in size, you would need to use a font size of 72 points. This would ensure that the characters are roughly one inch tall, assuming that the font is designed to be proportional and not condensed or expanded.

Choosing a smaller point size, such as 1 pt or 24 pts, would result in characters that are much smaller than one inch. Choosing a larger point size, such as 36 pts, would result in characters that are larger than one inch.

Therefore the correct answer is option b.) 72 pts.

To learn more about point size, refer:-

https://brainly.com/question/14052507

#SPJ4

Answer:

8;-2

Step-by-step explanation:

8 is the x axis and -2 is the y axis

Answer:

Step-by-step explanation:

Answer:

Step-by-step explanation:

Circle centre: (4,7)

Radius: 3

Equation is:

  [tex](x-h)^2+(y-k)^2=r^2[/tex]   (where (h,k) is center, r is radius)

  [tex](x-4)^2+(y-7)^2=3^2[/tex]

  [tex](x-4)^2+(y-7)^2=9[/tex]     (This is the general standard form )

in expanded form,

  [tex](x^2-8x+16)+(y^2-14y+49)=9[/tex]

  [tex]x^2+y^2-8x-14y+56=0[/tex]

Note: Unless stated either form is an acceptable answer.

Answer:

I attached your answer along with an explanation

Step-by-step explanation:

Please Like me follow me and Give me Crown for more help. :)

Answer:

The answer should be 20,365.714 but I am not sure

Step-by-step explanation:

The student's original statement has an issue in the way the "not" operator is used. The "not" operator (!) is negating the entire expression, including the variable 'x', rather than just the inequality. This leads to incorrect evaluation.

To correctly determine if x is not greater than 20, you should use the "less than or equal to" (<=) operator instead. Here is the corrected statement:

if (x <= 20)

This statement will be true if x is less than or equal to 20, which is the intended condition.

for such more questions on inequality

https://brainly.com/question/24372553

#SPJ11

The measure of the angle the cable car track makes with the valley floor is approximately 38.7 degrees.

The slope or inclination of a line or surface is sometimes referred to as the grade in mathematics. The ratio of the vertical change (rise) to the horizontal change (run) between any two locations on a line or surface is what is meant by this term. Usually, the grade is given as a percentage or a fraction. In engineering, building, and transportation, grades are frequently used to define the slope of roads, railroads, and other infrastructure. The grade, which refers to how steep the slope is when referring to a cable car, is a crucial element in determining the safety and effectiveness of the system.

To find the angle we use the trigonometric functions:

tan(θ) = grade = rise/run

Given that, the grade of the incline is 78%, then grade = 0.78.

θ = arctan(0.78) ≈ 38.7 degrees.

Hence, the measure of the angle the cable car track makes with the valley floor is approximately 38.7 degrees.

Learn more about grade here:

https://brainly.com/question/29150359

#SPJ1