The pressure exerted by oxygen gas, O₂, given that 90% of the total gas pressure is exerted by the nitrogen, is 0.5 atm
How do i determine the pressure exerted by oxygen gas?The following data were obtained from the question:
Percentage of nitrogen gas, N₂ = 90%Percentage of oxygen gas, O₂ = 100 - 90 = 10%Total pressure = 5.0 atmPressure exerted by oxygen gas, O₂ =?The pressure exerted by oxygen gas can be obtained as illustrated below:
Pressure exerted by oxygen gas = (percentage of oxygen gas / total percent) × total pressure
Pressure exerted by oxygen gas = (10 / 100) × 5
Pressure exerted by oxygen gas = 0.5 atm
Thus, we can conclude that the pressure exerted by oxygen gas is 0.5 atm
Learn more about partial pressure:
https://brainly.com/question/15577259
#SPJ1
Calculate the molality of a solution that contain 90. 0g of benzoic acid in 350 ml of water
The molality of a solution that contain 90. 0g of benzoic acid in 350 ml of water is 2.102 mole / kg.
The molarity of a solution is defined as the number of moles of solute dissolved in one liter of solution. Molarity can be expressed as the ratio of a solvent's moles to a solution's total liters. Both the solute and the solvent are part of the solution in calculating the molarity. It is the ratio of the solute moles to the solvent kilograms.
Molarity = Number of moles of solute Volume of solution in liter.
moles of C6H5COOH = 90.0 g / 122.12g/mole
= 0.736 mole
Now we have to calculate the mass of water.
= (350 ml) (1 g/ml) * 1L/ 1000ml
= 0.350 kg
Molarity = 0.736 mole/ 0.350 kg
= 2.102 mole / kg.
To learn more about Molarity
https://brainly.com/question/30404105
#SPJ4
calculate the heat released when 30.0 g of so2(g) reacts with 20.0 g of o2(g), assuming the reaction goes to completion.
The heat released when 30.0 g of [tex]SO_{2}[/tex](g) reacts with 20.0 g of [tex]O_{2}[/tex](g) is 184.8 kJ.
To calculate the heat released when 30.0 g of [tex]SO_{2}[/tex](g) reacts with 20.0 g of [tex]O_{2}[/tex](g), we first need to determine the balanced chemical equation for the reaction:
[tex]SO_{2} (g) + 1/2 O_{2}(g)[/tex] → [tex]SO_{3}(g)[/tex]
Now, we need to find the limiting reactant. First, let's calculate the moles of each reactant:
moles of [tex]SO_{2}[/tex] = mass of [tex]SO_{2}[/tex] / molar mass of [tex]SO_{2}[/tex]
moles of [tex]SO_{2}[/tex] = 30.0 g / (32.1 g/mol + 32.0 g/mol) = 0.468 moles
moles of [tex]O_{2}[/tex] = mass of [tex]O_{2}[/tex] / molar mass of [tex]O_{2}[/tex]
moles of [tex]O_{2}[/tex] = 20.0 g / 32.0 g/mol = 0.625 moles
Now, we'll find the mole ratio:
mole ratio = moles of [tex]O_{2}[/tex] / (1/2 * moles of [tex]SO_{2}[/tex])
mole ratio = 0.625 / (1/2 * 0.468) = 2.67
Since the mole ratio is greater than 1, [tex]SO_{2}[/tex] is the limiting reactant.
Now, we need to find the heat released. The standard enthalpy change of the reaction (ΔH°) for the formation of [tex]SO_{3}[/tex] is -395.2 kJ/mol. Therefore, the heat released can be calculated as follows:
heat released = moles of limiting reactant * ΔH°
heat released = 0.468 moles * -395.2 kJ/mol = -184.8 kJ
So, the heat released when 30.0 g of [tex]SO_{2}[/tex](g) reacts with 20.0 g of [tex]O_{2}[/tex](g) is 184.8 kJ.
To learn more about heat released; https://brainly.com/question/22862842
#SPJ11
A scientist collects data that shows the surface around a volcano is swelling a few centimeters. Which conclusion is the scientist most likely to make based on this data?
A. Magma is becoming more active underneath the volcano, which could lead to an eventual eruption. B. A volcanic eruption cannot occur within the next 30 days. C. A volcanic eruption of lava will definitely occur within the next 24 hours. D. Magma is becoming less active underneath the volcano, which means there is no possible eruption
Magma is becoming more active underneath the volcano, which could lead to an eventual eruption. Option A is the correct choice.
If the surface around a volcano is swelling, it indicates that there is an increase in pressure from magma rising beneath the surface. This is often a sign of increased volcanic activity, which can eventually lead to an eruption. A few centimeters of swelling may not necessarily indicate an imminent eruption, but it does suggest that the magma is becoming more active and may lead to an eruption in the future.
Therefore, the most likely conclusion that the scientist would make based on this data is that magma is becoming more active underneath the volcano, which could lead to an eventual eruption. Therefore, option A is correct.
To know more about magma, here
brainly.com/question/16940653
#SPJ4
PLEASE HELP AND FAST
Heredity Lab Report
Instructions: In the Heredity lab, you investigated how hamsters inherit traits from their parents. Record your observations in the lab report below. You will submit your completed report.
Name and Title:
Include your name, instructor's name, date, and name of lab.
Objective(s):
In your own words, what was the purpose of this lab?
Hypothesis:
In this section, please include the if/then statements you developed during your lab activity. These statements reflect your predicted outcomes for the experiment.
Test One: If I breed a short fur, FF female with a short fur, Ff male, then I will expect to see (all short fur; some short and some long fur; all long fur) offspring.
Test Two: If I breed a short fur, Ff female with a short fur, Ff male, then I will expect to see (all short fur; some short and some long fur; all long fur) offspring.
Test Three: If I breed a long fur, ff female with a long fur, ff male, then I will expect to see (all short fur; some short and some long fur; all long fur) offspring.
Procedure:
The procedures are listed in your virtual lab. You do not need to repeat them here. Please be sure to identify the test variable (independent variable) and the outcome variable (dependent variable) for this investigation.
Remember, the test variable is what is changing in this investigation. The outcome variable is what you are measuring in this investigation.
Test variable (independent variable):
Outcome variable (dependent variable):
Data:
Record the data from each trial in the data chart below. Be sure to fill in the chart completely.
Test One
Parent 1: FF
Parent 2: Ff
Phenotype ratio:
________ :
________
short fur :
long fur
Test Two
Parent 1: Ff
Parent 2: Ff
Phenotype ratio:
________ :
________
short fur :
long fur
Test Three
Parent 1: ff
Parent 2: ff
Phenotype ratio:
________ :
________
short fur :
long fur
Conclusion:
Your conclusion will include a summary of the lab results and an interpretation of the results. Please write in complete sentences.
Which genotype(s) and phenotype for fur length are dominant?
Which genotype(s) and phenotype for fur length are recessive?
If you have a hamster with short fur, what possible genotypes could the hamster have?
If you have a hamster with long fur, what possible genotypes could the hamster have?
Did your data support your hypotheses? Use evidence to support your answer for each test.
Test One:
Test Two:
Test Three:
Which hamsters are the parents of the mystery hamster? Include evidence to prove that they are the correct parents.
The parents of the mystery hamster are most likely Test Two parents (Ff x Ff), as they have the possibility of producing both short fur and long fur offspring, which matches the observed phenotype of the mystery hamster.
What is Genotype?
The genotype of an organism can be represented using letters to denote the alleles inherited from each parent. For example, in humans, the gene for eye color has two alleles: brown (B) and blue (b). A person with brown eyes would have a BB or Bb genotype, while a person with blue eyes would have a bb genotype.
Test variable (independent variable): Genotype of parents
Outcome variable (dependent variable): Phenotype of offspring (fur length)
Data:
Test One
Parent 1: FF
Parent 2: Ff
Phenotype ratio:
3 : 0
short fur : long fur
Test Two
Parent 1: Ff
Parent 2: Ff
Phenotype ratio:
3 : 1
short fur : long fur
Test Three
Parent 1: ff
Parent 2: ff
Phenotype ratio:
0 : 4
short fur : long fur
From the lab results, we can conclude that the genotype for short fur length is dominant over the genotype for long fur length. The genotype for long fur length is recessive.
If you have a hamster with short fur, the possible genotypes could be FF or Ff.
If you have a hamster with long fur, the genotype could only be ff.
The data supports the hypothesis that the genotype for short fur is dominant and the genotype for long fur is recessive.
Learn more about Genotype from the given link
https://brainly.com/question/22117
#SPJ1
the color of a basic dye is in the positive ion, and the color of an acidic dye is in the negative ion. true false
The given statement that "the color of a basic dye is in the positive ion, and the color of an acidic dye is in the negative ion" is: true.
Here is the explanation of this statement:Basic Dye: It is a type of dye that is cationic in nature. It contains the positive ion, which is responsible for the color. It works best for staining acidic components in the sample.
As it contains a positive ion, it attracts the negatively charged components of the cell walls of bacteria or the tissues of the organism. This makes it easier to visualize the structures of the organism under the microscope.
Acidic Dye: Acidic Dye is anionic in nature, meaning that it contains a negative ion that is responsible for color. It works best for staining basic components in the sample.
As it contains a negative ion, it repels the negatively charged components of the cell walls of bacteria or the tissues of the organism. This makes it easier to visualize the structures of the organism under the microscope.
Therefore, it can be concluded that the given statement is true.
To know more about Acidic Dye refer here:
https://brainly.com/question/30902645#
#SPJ11
What is the temperature of helium gas confined in a two Litre flask under a pressure of 2.05 atm?
The temperature of helium gas confined in a two Litre flask under a pressure of 2.05 atm is approximately 41.11 °C.
The temperature of helium gas confined in a two Litre flask under a pressure of 2.05 atm can be calculated using the Ideal Gas Law. The Ideal Gas Law is expressed as PV = nRT, where P is pressure, V is volume, n is the number of moles of gas, R is the universal gas constant, and T is temperature.
In this case, we know that the pressure is 2.05 atm and the volume is 2 L. We also know that helium is a monoatomic gas with a molar mass of 4 g/mol. We can use the universal gas constant R = 0.0821 L atm/mol K. Plugging in these values, we get:
2.05 atm × 2 L = n × 0.0821 L atm/mol K × T
Dividing both sides by 0.0821 L atm/mol K gives:
n = (2.05 atm × 2 L) / (0.0821 L atm/mol K × T)
Simplifying, n = 50 T / R. We can now solve for T: n = 50 T / R => T = nR / 50
Substituting in the values we have:
n = (2.05 atm × 2 L) / (0.0821 L atm/mol K × 1 mol / 4 g)
= 24.88 molT = (24.88 mol × 0.0821 L atm/mol K) / 50
= 0.04111 K or 41.11 °C.
Therefore, the temperature of helium gas confined in a two Litre flask under a pressure of 2.05 atm is approximately 41.11 °C.
To learn more about temperature; https://brainly.com/question/25677592
#SPJ11
9. a 50 ml sample of an aqueous solution contains 1.08 g of human serum albumin, a blood-plasma protein. the solution has an osmotic pressure of 5.85 mmhg at 298 k. what is the molar mass of the albumin?
The molar mass of the albumin can be calculated by dividing the number of moles (1.08 g) by the molarity (0.0216 mol/L), which yields a molar mass of 49.54 g/mol.
The molar mass of the albumin can be calculated using the given data. First, calculate the molarity of the solution. Molarity = Number of moles/Volume of solution = 1.08 g/50 mL = 0.0216 mol/L.
The osmotic pressure of the solution can be calculated using the Van’t Hoff equation,
which states that osmotic pressure is equal to the molarity multiplied by the universal gas constant (R) multiplied by the temperature (T).
Therefore, osmotic pressure = 0.0216 mol/L × 8.3145 L.atm/mol.K × 298 K = 5.85 mmHg.
The molar mass of the albumin, rearrange the osmotic pressure equation to solve for molarity, molarity = osmotic pressure/RT = 5.85 mmHg/(8.3145 L.atm/mol.K × 298 K) = 0.0216 mol/L.
The molar mass of the albumin can be calculated by dividing the number of moles (1.08 g) by the molarity (0.0216 mol/L), which yields a molar mass of 49.54 g/mol.
The molar mass of the albumin can be calculated by first calculating the molarity of the solution, which is equal to the number of moles divided by the volume of the solution.
The osmotic pressure of the solution can then be calculated using the Van't Hoff equation, which states that osmotic pressure is equal to the molarity multiplied by the universal gas constant and the temperature.
The molar mass of the albumin can then be calculated by rearranging the osmotic pressure equation to solve for molarity and then dividing the number of moles by the molarity. This yields a molar mass of 49.54 g/mol.
to know more about albumin refer here:
https://brainly.com/question/18882874#
#SPJ11
how many moles of aspirin, c9h8o4, are in a tablet that contains 325 mg of aspirin? group of answer choices 0.555 moles 0.467 moles 0.357 moles 2.80 moles 0.00180 moles
The number of moles of aspirin, C₉H₈O₄, there are in a tablet that contains 325 mg of aspirin 0.00180 moles.
To calculate the number of moles of aspirin, the molar mass must first be determined. The molar mass of aspirin (C₉H₈O₄) is the sum of the atomic masses of each element in the compound, which are carbon (12.0107 g/mol), hydrogen (1.00794 g/mol), and oxygen (15.9994 g/mol). The total molar mass of aspirin is:
(9 x 12.0107) + (8 × 1.00794) + (4 × 15.9994) = 180.15 g/mol.
The number of moles of aspirin in a 325 mg tablet can be calculated by dividing its mass, 325 mg (0.325 g), by the molar mass of aspirin.
moles = mass/molar mass
Plugging in the values, we get:
moles = 325 mg(1 g/1000mg) / (180.15 g/mol) = 0.00180 moles
In conclusion, there are 0.00180 moles of aspirin, C₉H₈O₄, in a tablet that contains 325 mg of aspirin.
Learn more about moles here: https://brainly.com/question/14357742.
#SPJ11
what is the molarity of an ca(oh)2 solution that contains 15.6 g of hydroxide in 105.0 ml of solution
The molarity of a Ca(OH)2 solution that contains 15.6 g of hydroxide in 105.0 ml of solution is 8.72 M.
Molarity is a way to measure the concentration of a solution. It is defined as the number of moles of a substance in a liter of solution. The formula for calculating molarity is:
Molarity = moles of solute / liters of solution
The molarity of a Ca(OH)2 solution that contains 15.6 g of hydroxide in 105.0 ml of solutionroxide (OH-) in the solution. The molar mass of hydroxide is 17.01 g/mol, so:
moles of OH- = mass of OH- / molar mass of OH-
moles of OH- = 15.6 g / 17.01 g/mol
moles of OH- = 0.916 moles
2. The volume of solution:
L = ml / 1000
L = 105.0 ml / 1000
L = 0.105 L
3. The molarity of the solution :
Molarity = moles of solute / liters of solution
Molarity = 0.916 moles / 0.105 L
Molarity = 8.72 M
Therefore, the molarity of a Ca(OH)2 solution that contains 15.6 g of hydroxide in 105.0 ml of solution is 8.72 M.
to know more about molarity refer here:
https://brainly.com/question/8732513#
#SPJ11
what are the major species present in 0.250 m solutions of each of the following acids? calculate the ph of each of these solutions. a. hclo4 b. hno3
pH of both [tex]HClO_4[/tex] and [tex]HNO_3[/tex] is 1.60
1.A 0.250 M solution's pH of [tex]HClO_4[/tex] can be calculated by first determining the concentration of the [tex]H_3O+[/tex] ions in the solution. The equation below can be used to accomplish this:
[tex][H_3O+] = [HClO_4][/tex]
Since the concentration of [tex]HClO_4[/tex] is 0.250 M, the concentration of [tex]H_3O+[/tex] is also 0.250 M. The pH of a solution can then be calculated using the equation:
[tex]pH = -log[H_3O^+][/tex]
Plugging in the concentration of [tex]H_3O+[/tex] gives:
[tex]pH = -log(0.250)[/tex]
As a result, the solution has a pH of 1.60.
b.The pH of a solution can be calculated by using the equation [tex]pH = -log[H_3O^+][/tex] , where [tex][ H_3O+][/tex]is the concentration of hydronium ions [tex]( H_3O+)[/tex] in the solution. In this case, the concentration of [tex]H_3O+[/tex]The concentration of ions in the solution is equal to that of [tex]HNO_3[/tex], which is 0.250 M. As a result, the following formula can be used to determine the solution's pH:
[tex]pH = -log[H_3O^+][/tex]
[tex]= -log(0.250)\\pH = 1.60[/tex]
learn more about hydronium ions Refer:brainly.com/question/14619642
#SPJ1
at a party, 6.00 kg of ice at -5.00oc is added to a cooler holding 30.0 liters of water at 20.0oc. what is the temperature of the water when it comes to equilibrium?
The temperature of the water when it comes to equilibrium is 69.48°C.
Firstly, the heat lost by ice is equal to the heat gained by water. This is because the process of melting of ice requires heat energy, and this heat energy will be absorbed from the water present in the cooler.
Let us find out the heat lost by ice. The specific heat of ice is 2.05 J/g·°C, and the heat of fusion of ice is 334 J/g. Heat lost by ice can be given as:
q1 = mass of ice × specific heat of ice × (final temperature - initial temperature) + mass of ice × heat of fusion
q1 = 6.00 × 10^3 g × 2.05 J/g·°C × (0 - (-5)) + 6.00 × 10^3 g × 334 J/g
= 6.00 × 10^3 g × 10.25 J/g·°C + 2.00 × 10^6 J
= 6.15 × 10^4 J + 2.00 × 10^6 J
= 2.06 × 10^6 J
Heat gained by water can be given as:
q2 = mass of water × specific heat of water × (final temperature - initial temperature)
q2 = 30.0 kg × 4.18 J/g·°C × (final temperature - 20.0°C) = 1254 J/kg·°C × (final temperature - 20.0°C)
Since q1 = q2,
we have: 6.15 × 10^4 J + 2.00 × 10^6 J
= 1254 J/kg·°C × (final temperature - 20.0°C)6.21 × 10^4 J
= 1254 J/kg·°C × (final temperature - 20.0°C)
final temperature - 20.0°C = 6.21 × 10^4 J / (1254 J/kg·°C)
final temperature - 20.0°C = 49.48°C
final temperature = 49.48°C + 20.0°C = 69.48°C
Hence, the temperature of the water when it comes to equilibrium is 69.48°C.
To know more about equilibrium, refer here:
https://brainly.com/question/30807709#
#SPJ4
doppelbocks are lagers unified by what characteristic? group of answer choices they have almost no bitterness a low alcohol content a high alcohol content they are very bitter
Doppelbocks are lagers unified by their high alcohol content.
Doppelbocks are German lagers that are dark and full-bodied. They are recognized for their rich malt flavors and alcoholic content, which is typically over 7% by volume. The monks of Munich developed the style in the 17th century, and the doppelbock style has been associated with monastic brewing ever since.
Doppelbocks are unified by high alcohol content because they are high in maltose and other fermentable sugars, which make them perfect for long, cold fermentations that yield a rich, complex, and smooth flavor. Lagers are a type of beer typically fermented at low temperatures and for an extended period. They are one of two significant categories of beer, the other being ales. Lagers are usually lighter in color and smoother in flavor than ales. They are also typically lower in alcohol content and have a cleaner, crisper taste than ales.
In conclusion, Doppelbocks are lagers unified by high alcohol content.
Read more about alcohol :
https://brainly.com/question/947751
#SPJ11
For another researcher's data the starting mass of apparatus + solid was 113.249 g. After the reaction was complete the apparatus was reweighed. The resulting mass was 113.276 g. Which of the following could have caused the mass gain?
Select all that apply
Group of answer choices
The apparatus had a gas leak and room air could enter the apparatus.
The apparatus picked up extra water droplets between weighings
They forgot to weigh the mass of the gas-generating solid before the reaction.
Matter was created in the reaction.
The mass gain that happened after the reaction could have been caused due to the matter was created in the reaction .
What is mass gain?
In physics, mass gain refers to an increase in mass in a chemical or nuclear reaction. It is the difference between the mass of the reactants and the mass of the products after a chemical reaction has occurred.
What happened in the given problem?
According to the given problem, the starting mass of the apparatus and solid was 113.249 g. After the reaction was complete, the apparatus was reweighed. The resulting mass was 113.276 g. The problem asks which of the following could have caused the mass gain.
The mass gain could have been caused by the following:
They forgot to weigh the mass of the gas-generating solid before the reaction
The apparatus picked up extra water droplets between weighing's.
Matter was created in the reaction.
The apparatus picked up extra water droplets between weighings, but they forgot to weigh the mass of the gas-generating solid before the reaction, and matter was created in the reaction.
To know more about the mass https://brainly.com/question/19694949
#SPJ11
How many moles are in 6. 4 x 1024 molecules of HBr?
There are 1.06 moles in 6.4 x 10²⁴ molecules of HBr.
The chemical formula of hydrogen bromide is HBr. A mole is a unit of measurement that expresses the amount of a chemical substance that includes a fixed number of units of that substance. One mole of a substance is equal to the Avogadro number or 6.022 x 10²³ of that substance.In this problem, we need to figure out how many moles are in 6.4 x 10²⁴ molecules of HBr. We'll start by using Avogadro's number to convert the number of molecules to moles.
According to Avogadro's number, 6.022 x 10²³ molecules are in one mole.
Therefore, to figure out how many moles there are in 6.4 x 10²⁴ molecules,
we will use the following formula:
moles = number of molecules ÷ Avogadro's numbermoles = 6.4 x 10²⁴ ÷ (6.022 x 10²³)moles = 1.06 moles
So, there are 1.06 moles in 6.4 x 10²⁴ molecules of HBr.
For more such questions on hydrogen bromide, click on:
https://brainly.com/question/20460954
#SPJ11
if 254 ml of a 2.10 m sucrose solution is diluted to 850.0 ml , what is the molarity of the diluted solution?
If 254 ml of a 2.10 m sucrose solution is diluted to 850.0 ml , the molarity of the diluted solution is 0.63 M.
Given:
Initial volume of sucrose solution, V1 = 254 mL
Initial molarity of sucrose solution, M1 = 2.10 M
Initial volume of diluted solution, V2 = 850 mL
To calculate Molarity of the diluted solution, M2
We can use the formula of Molarity, given as:
Molarity = (Number of moles of solute) / (Volume of solution in liters)
or
M1V1 = M2V2
Let's apply this formula in the given data:
M1V1 = M2V2(2.10 M) x (254 mL) = M2 x (850 mL)
Now, convert mL to L:
M1V1 = M2V2(2.10 M) x (0.254 L)
= M2 x (0.850 L)M2
= (2.10 M x 0.254 L) / 0.850 LM2
= 0.63 M
Therefore, the molarity of the diluted solution is 0.63 M.
For more such questions on molarity , Visit:
https://brainly.com/question/30404105
#SPJ11
What does Einstein's famous equation say that all matter is?
concentrated supernovas that have condensed into dwarfs
concentrated energy that has condensed into the atoms
concentrated atoms that have condensed into protons
concentrated nebulas that have been condensed into red giants
Einstein's famous equation say that all matter is option B. concentrated energy that has condensed into the atoms.
What is Einstein's famous equation?When combined with the speed of light, Einstein's famous equation E=mc2 demonstrates mathematically that energy and matter are one and the same. m stands for mass, c for the speed of light, and E stands for energy. This equation states that all matter is simply concentrated energy that has condensed into atoms.
Einstein's famous equation is E=mc², which expresses the relationship between mass (m) and energy (E), and the constant speed of light (c) in a vacuum. This equation shows that mass and energy are interchangeable, and that a small amount of mass can be converted into a large amount of energy, as demonstrated in nuclear reactions.
Learn more about Einstein at:
https://brainly.com/question/26366397
#SPJ1
assume that the equilibrium represented around point (a) in the titration can generically be described as
The pH at which the ratio of [HA₂⁻] to [H₂A⁻] is 25:1 is 11.1.
Titration is a technique used to determine the concentration of a solution by reacting it with a standardized solution. This process can be used to determine the acidity or basicity of a solution.
Assume that the equilibrium represented around point (A) in the titration can generically be described as:
H₃A + OH⁻ → H₂A⁻ + HOH
Ka₁ = 6.76 x 10⁻³
Ka₂ = 9.12 x 10⁻¹⁰
There are three stages to the titration curve. The first stage corresponds to the point at which there is an excess of strong base, and the pH changes rapidly with each addition of base. The second stage corresponds to the buffer region, and the pH changes only slightly with each addition of base. Finally, the third stage corresponds to the point at which the excess base is equal to the amount of acid present in the solution, and the pH changes rapidly once again.
In the equation H₃A + OH⁻ → H₂A⁻ + HOH the first dissociation constant, Ka₁, is equal to
[ H₂A⁻ ][H⁺]/[H₃A]
The second dissociation constant, Ka₂, is equal to
[H₃A⁻ ][OH⁻ ]/[H₂A⁻ ]
Let's assume that the equilibrium is initially set up at pH pKa₁, such that [H₃A] = [H₂A⁻ ].
The pH of the solution at equilibrium will be equal to pKa₁.
Let's suppose that a strong base is added to the solution, and the amount of [OH⁻ ] added is x.
As a result, [H₃A] and [H₂A⁻ ] will be reduced by x, while [HA₂⁻] will be increased by x.
[H₃A] = [HA₂⁻] = [H+];
[OH⁻] = x;
[HA₂⁻] = [OH⁻-];
[H₃A] - x;
[H₂A⁻] - x
We can then calculate the concentration of each species using the expression for the acid dissociation constant:
[H₃A] = [H2A⁻] = [H+];
[OH⁻] = x;
[HA₂⁻] = [OH⁻];
[H₃A] - x;
[H₂A-] - x
Ka₁ = [H₂A⁻][H+]/[H₃A]
Ka₁ = x^2 / ([H+]-x)
Ka₂ = [HA₂⁻][OH⁻]/[H₂A⁻]
Ka₂ = [x][x] / ([H+]-x)
Ka₂= x²/([H+]-x) = 25
Ka₁ is used to calculate [H+]
Ka₂ is used to calculate:
Ka₂ [HA₂⁻] / [H₂A⁻][H+] = 2.06 x 10⁻⁶,
pH = 5.68
[H₂A⁻] / [HA₂⁻] = 0.04,
[HA₂⁻] = [HA₂⁻] * 25 = 1.00 x 10⁻⁴
[OH-] = Ka₂ [H₂A-] / [HA₂⁻] = 9.12 x 10⁻¹⁰ * [H₂A⁻] / [HA₂⁻] = 2.28 x 10⁻¹⁴
pOH = 13.64
pH = 11.1
Therefore, at pH 11.1, the ratio of [HA₂⁻] to [H₂A⁻] is 25:1.
Learn more about titration at https://brainly.com/question/186765
#SPJ11
a face-centered cubic cell contains x atoms at the corners of the cell and y atoms at the faces. what is the empirical formula of the solid?
The empirical formula of the solid can be represented as x:y.
The empirical formula of the solid is determined by the ratio of the atoms found at the corners and faces of the face-centered cubic cell.
Since the number of atoms at the corners is represented by x, and the number of atoms at the faces is represented by y, then the empirical formula of the solid can be represented as x:y.
For example, if a face-centered cubic cell contains 2 atoms at the corners and 6 atoms at the faces, then the empirical formula of the solid can be written as 2:6, or 1:3.
The empirical formula of the solid, it is necessary to first determine the total number of atoms that make up the cell.
This can be done by multiplying the number of atoms at the corners (x) by 8, since there are 8 corners in a face-centered cubic cell, and adding the result to the number of atoms at the faces (y).
This total number of atoms can be represented as T, and can be written as T = 8x + y.
The empirical formula of the solid is then determined by dividing the number of atoms at the corners (x) and faces (y) by the total number of atoms (T). This calculation can be written as x/T and y/T.
Therefore, the empirical formula of the solid is determined by the equation x/T:y/T.
For example, if a face-centered cubic cell contains 2 atoms at the corners and 6 atoms at the faces, then the total number of atoms in the cell is 14 (8x2 + 6).
Therefore, the empirical formula of the solid can be calculated as 2/14:6/14, or 1:3.
The empirical formula of the solid in a face-centered cubic cell can be determined by,
calculating the total number of atoms in the cell (8x + y), and then dividing the number of atoms at the corners (x) and faces (y) by this total number. The result is the empirical formula of the solid, which is represented as x:y.
to know more about empirical formula refer here:
https://brainly.com/question/14044066#
#SPJ11
calculate the molar extinction coefficient of a cu (ii) complex if the solution was prepared by dissolving 0.1 mg of a sample in a volume of 50 ml. measured absorbance of the solution is 0.27. cuvette thickness is 1 cm.
The molar extinction coefficient (E) of the Cu (II) complex is [tex]135 cm^{-1} M^-{1}[/tex]
What is molar extinction in chemistry?To calculate the molar extinction coefficient (ε) of a Cu (II) complex, we can use the Beer-Lambert law, which relates the concentration, path length, and absorbance of a solution:
A = εxbxc
where A is the measured absorbance, & is the molar extinction coefficient, b is the path length (cuvette thickness), and c is the concentration.
We can rearrange the formula to solve for ε:
ε = A / (bx c)
In this case, we are given the following information:
The mass of the sample = 0.1 mg
• The volume of the solution = 50 ml
• The measured absorbance = 0.27 •
The cuvette thickness (path length) = 1 cm
First, we need to calculate the concentration of the Cu (II) complex in the solution:
• Mass of Cu (II) complex = 0.1 mg
• Volume of solution = 50 ml = 0.05 L
• Concentration = mass/volume = (0.1 mg / 1000 mg/g) / 0.05 L = 0.002 M
Now, we can substitute the given values into the Beer-Lambert law and solve
for ε:
ε = A/ (bx c) = 0.27 / (1 cm x 0.002 M) = [tex]135 cm^{-1} M^{-1}[/tex]
Therefore, the molar extinction coefficient (E) of the Cu (II) complex is [tex]135 cm^{-1} M^{-1}[/tex].
Learn more about molar extinction
brainly.com/question/30908294
#SPJ1
if molecules of hydrogen, nitrogen, oxygen and chlorine have the same kinetic energy which molecule will be moving the fastest? a) hydrogen b) nitrogen c) oxygen d) chlorine e) all molecules will have the same speed.
The answer to the question is "e) all molecules will have the same speed." This is because all molecules, regardless of what elements they are made up of, have the same kinetic energy, so they will be moving at the same speed.
To better understand this concept, it is important to note that kinetic energy is the energy of an object due to its motion. Kinetic energy is determined by the mass and speed of the object, with the equation being KE = 1/2 x m x v^2 (where m is the mass and v is the velocity). So, if two objects have the same kinetic energy, they must have the same velocity, regardless of their mass.
As all molecules of hydrogen, nitrogen, oxygen and chlorine have the same kinetic energy, they must also have the same velocity, meaning that all molecules will be moving at the same speed. This is because the molecules' masses differ, but as the kinetic energy is the same, the velocity must be the same as well.
It is also important to note that kinetic energy is not the same as momentum. Momentum is determined by the mass and velocity of an object, but is not dependent on the kinetic energy of the object. So, while all molecules of hydrogen, nitrogen, oxygen and chlorine have the same kinetic energy, they may still have different momentum, due to their different masses.
In conclusion, all molecules of hydrogen, nitrogen, oxygen and chlorine will have the same speed, as they all have the same kinetic energy.
Learn more about Kinetic energy here:
https://brainly.com/question/15764612#
#SPJ11
n the combustion analysis of 0.1127 g of glucose (c6 h12 o6 ), what mass, in grams, of co2 would be produced?
Answer: The combustion analysis of 0.1127 g of glucose (C6H12O6) yields 0.3283 g of CO2.
The equation for the combustion of glucose is:
C6H12O6(s) + 6O2(g) → 6CO2(g) + 6H2O(g)
When glucose is combusted, the number of CO2 and H2O molecules is equal. Here, 1 mole of CO2 is produced for every mole of glucose that is burned.
Thus, the mass of CO2 produced can be calculated using the formula:
mass of CO2 produced = moles of CO2 produced x molar mass of CO2
The first step is to determine the number of moles of glucose that was burned. The molecular weight of glucose is:
Molecular weight of glucose = (6 x 12.01 g/mol) + (12 x 1.01 g/mol) + (6 x 16.00 g/mol)
= 180.18 g/mol
Next, we need to calculate the number of moles of glucose in the 0.1127 g of glucose given:
n = m/Mw = 0.1127 g / 180.18 g/mol
= 0.000625 mol
Now that we know the number of moles of glucose that was burned, we can calculate the number of moles of CO2 produced.
Since 1 mole of glucose produces 6 moles of CO2, the number of moles of CO2 produced is:
= 0.000625 mol x 6
= 0.00375 mol
Finally, we can use the molar mass of CO2 to calculate the mass of CO2 produced:
= 0.00375 mol x 44.01 g/mol
= 0.1659 g ≈ 0.3013 g
Therefore, the mass of CO2 produced in the combustion of 0.1127 g of glucose is approximately 0.3013 g.
What is a combustion analysis?
The combustion analysis is a method used to determine the empirical formula of organic compounds. The sample is burned in the presence of excess oxygen to form carbon dioxide and water.
The masses of these products are measured and used to calculate the empirical formula of the compound.
Learn more about combustion analysis here:
https://brainly.com/question/28547293#
#SPJ11
How many atoms are in 32.10 g of He
Taking into account the definition of Avogadro's Number, 4.83×10²⁴ atoms of He are in 32.10 g of He.
Definition of molar massThe molar mass of substance is a property defined as the amount of mass that a substance contains in one mole.
Definition of Avogadro's NumberAvogadro's Number is called the number of particles that make up a substance (usually atoms or molecules) and that can be found in the amount of one mole.
Its value is 6.023×10²³ particles per mole.
Amount of moles of 32.10 g of HeThe molar mass of He is 4 g/mole. You can apply the following rule of three: If by definition of molar mass 4 grams of He are contained in 1 mole of He, 32.10 grams of He are contained in how many moles?
moles= (32.10 grams × 1 mole)÷ 4 grams
moles= 8.025 moles
The amount of moles of He in 32.19 grams is 8.025 moles.
Amount of atoms of 32.10 g of HeYou can apply the following rule of three: If by definition of Avogadro's Number 1 mole of He contains 6.023×10²³ atoms, 8.025 moles of He contains how many atoms?
amount of atoms of He= (8.025 moles × 6.023×10²³ atoms)÷ 1 mole
amount of atoms of He= 4.83×10²⁴ atoms
Finally, 4.83×10²⁴ atoms of He are present.
Learn more about Avogadro's Number:
brainly.com/question/11907018
#SPJ1
How many molecules are there in 4.00 moles of glucose, c6h12o6
Answer: There are 2.41 * 102 molecules in 4.00 moles of glucose.
Explanation: Glucose is C6H12O6, and Avogadro's Number (named for Amadeo Carlo Avogadro 1776 – 1856) tells us that 1 mole contains 6.022 x 10^23 molecules. So, 4.0 moles contains 4 x 6.022 x 10^23 = 2.409 x 10^24 molecules.
How many formula units are contained in 0. 67 grams of CaO?
There are approximately 7.15 x 10^21 formula units of CaO present in 0.67 grams of CaO.
Calculate the molar mass of CaO, which is the sum of the atomic masses of calcium and oxygen,
Molar mass of CaO = (1 x atomic mass of Ca) + (1 x atomic mass of O)
Molar mass of CaO = 56.08 g/mol
Convert the given mass of CaO to moles using the molar mass,
Moles of CaO = Mass of CaO / Molar mass of CaO
Moles of CaO = 0.0119 mol
Use Avogadro's number to convert moles of CaO to formula units,
Formula units of CaO = Moles of CaO x Avogadro's number
Formula units of CaO = 0.0119 mol x 6.022 x 10^23 formula units/mol
Formula units of CaO = 7.15 x 10^21 formula units
To know more about formula units, here
brainly.com/question/20704685
#SPJ4
calculate the volume in ml of 100% ethanol required to make 900 ml of 60% (v/v) solution ethanol in water.
The volume of 100% ethanol required to make 900 ml of 60% (v/v) solution ethanol in water is 540 ml.
To calculate the volume in ml of 100% ethanol required to make 900 ml of 60% (v/v) solution ethanol in water, you will need the following formula:
C1V1 = C2V2
Where C1 is the initial concentration of the solution (in this case, 100%), V1 is the initial volume of the solution (unknown), C2 is the final concentration of the solution (in this case, 60%), and V2 is the final volume of the solution (900 ml).
To solve for V1, we can rearrange the formula as follows:
V1 = (C2V2) / C1
Plugging in the values, we get:
V1 = (0.60 * 900) / 1.00
V1 = 540 ml
Therefore, you will need 540 ml of 100% ethanol to make 900 ml of a 60% (v/v) solution of ethanol in water.
To know more about ethanol, refer here:
https://brainly.com/question/30263729#
#SPJ11
the temperature of a constant volume of gas at 1.00 atm is 25 oc. in order to increase the pressure to 2.00 atm, what temperature is needed?
Answer: 323 degrees Celsius :)
Explanation:
a student titrates a 25 ml of an unknown concentration of hcl with 35 ml of a 0.890 m solution of koh toreach the equivalence point. what is the ph of the unknown hcl solution?
In order to determine the pH of the unknown HCl solution, a titration calculation must be performed and the pH is 0.903.
The process of adding a standard solution to another solution with the aim of determining the concentration of the second solution is known as titration. HCl is a strong acid, while KOH is a strong base, which implies that when they react, their equivalence point is pH 7. The pH scale is used to measure the acidity or basicity of a solution. pH is defined as the negative logarithm of the hydrogen ion concentration of a solution. pH is a measure of the acidity or basicity of a solution. It is a dimensionless value that ranges from 0 to 14.1. Before the titration of the HCl solution with the KOH solution,
Let's calculate the number of moles of KOH using the formula given below:
Number of moles of KOH = concentration of KOH × volume of KOH solution
Number of moles of KOH = 0.890 M × 0.035 L
= 0.03115 mol
We now convert moles of KOH to moles of HCl to find the concentration of HCl using the equation given below:
Moles of KOH = Moles of HCl
0.03115 mol KOH = Moles of HCl
25 mL of HCl = 0.025 L of HCl
Therefore, the concentration of HCl = 0.03115 mol / 0.025 L
= 1.246 M
We have now found the concentration of the HCl solution to be 1.246 M.
2. To find the pH of HCl, let's first recall that the concentration of H+ ions in a solution of a strong acid is equal to its concentration.
Since HCl is a strong acid, its pH can be found using the formula:
pH = -log[H+]
pH = -log[1.246]
pH = 0.903
Hence, the pH of the unknown HCl solution is 0.903.
Learn more about pH: https://brainly.com/question/172153
#SPJ11
when 5 grams of a nonelectrolyte is added to 30 g of water, the new freezing point is -2.5 deg c. what is the molecular mass of the unknown compound?
The molecular mass of the unknown compound is 3.7 g/mol.
The molecular mass of the unknown compound can be calculated using the formula for freezing point depression, which is:
ΔT = Kf * m
Where Kf is the freezing point depression constant (1.86 K/m),
m is the molality of the solution (moles of solute per kilogram of solvent), and
ΔT is the difference between the freezing point of the pure solvent and the freezing point of the solution.
Plugging in the values given, we get:
-2.5 = 1.86 * m
Solving for m, we get,
m = -2.5 / 1.86
= 1.35 m
Therefore, the molecular mass of the unknown compound can be calculated by dividing the mass of the unknown compound (5 grams) by the molality of the solution (1.35 m).
This gives us a molecular mass of 3.7 g/mol.
Learn more about molecular mass here:
https://brainly.com/question/837939
#SPJ11
what is the substance undergoing a chemical or physical change known as?
The substance undergoing a chemical or physical change is called a reactant. Reactants are starting materials that participate in a chemical reaction, which can result in the formation of new chemical compounds or changes in the physical properties of the substances involved.
In a physical change, the reactants retain their chemical identity, but undergo a change in their physical state or properties, such as melting, freezing, boiling, or changing color. In a chemical change, the reactants undergo a chemical reaction that results in the formation of new chemical compounds, breaking of chemical bonds, or release of energy. Understanding the properties and behavior of reactants is crucial in predicting and controlling chemical reactions in various fields, from materials science to biochemistry.
To know more about Reactants, here
brainly.com/question/17096236
#SPJ4
two compounds are both composed of the exact same types and number of atoms. however, the atoms are connected in different ways in each compound. these two compounds would be classified as .
Answer:
Isomers
Explanation:
Molecules with the same molecule formula but different structural formulae