Phillip left his house and bicycled down a trail at a rate of 12 kilometers per hour. He planned to ride his bicycle to the end of the trail, which is 28 kilometers long, and then return to his house. Christine started from Phillip’s house 20 minutes later and caught up to Phillip just as he reached the end of the trail. How fast was Christine traveling?

Answer:

Step-by-step explanation:

To find the benchmarks between which 3/8 falls, we need to identify the nearest fractions with denominators that are multiples of 8.

The fraction 3/8 is halfway between 1/4 and 1/2, which can be written as 2/8 and 4/8 respectively. So, we know that 3/8 is greater than 2/8 and less than 4/8.

Therefore, the benchmarks between which 3/8 falls are 2/8 and 4/8. Alternatively, we can express these fractions as decimals and say that 3/8 falls between 0.25 and 0.5.

The equation of the line y = 3x + 10 in standard form is 3x - y = -10.

Given the equation of line in the question:

y = 3x + 10

To write the equation of the line in standard form, we need to rearrange the equation so that the x and y terms are on the left side and the constant term is on the right side of the equation.

It is expressed as;

Ax + Bx = C

y = 3x + 10

Subtracting 3x from both sides, we get:

y - 3x = 3x - 3x + 10

y - 3x = 10

Reorder

-3x + y = 10

Multiply each term by -1

-3x(-1) + y(-1) = 10(-1)

3x - y = -10

Therefore, the equation in standard form is 3x - y = -10.

Learn more about equation of line here:https://brainly.com/question/28696396

#SPJ1

If Kelly is flying a kite to which the angle of elevation is 70 degrees. The string on the kite is 65 meters long. The kite is about 61 meters above the ground.

We can use trigonometry to solve the problem. Let's call the height of the kite above the ground "h".

Using trigonometry, we can write:

sin (70) = h / 65

Solving for h, we get:

h = 65 * sin(70)

h= 65 * 0.9397

h ≈ 61 meters

Therefore, the kite is about 61 meters above the ground.

Learn more about height here: https://brainly.com/question/73194

#SPJ1

Answer
Y. Answer:

y=30

Step-by-step explanation:

(3)^2 equals 9, so the first blank is 9.

You then multiply it by the 2, so second blank is 18.

18+15=33

33-3=30=y

Answer:

30

Step-by-step explanation:

first space should be 9 since 3² is 9

second space should be 18 since 2×9=18

final space should be 30 since 18+15 is 33-3=30

According to combinations formula there are 495 possible committees that can be selected from a group of 12 people.

To calculate this, you can use the formula for combinations

nCr = n!/(r!(n-r)!)

where n is the total number of people (12) and r is the number of people on the committee.
Therefore, the possible number of committees that can be selected is;

= {12!}/{4!8!}
= 12*11*10*9/4*3*2*1

= 11880/24
= 495
Therefore, 495 possible committees can be selected from a group of 12 people if a committee of 4 is to be selected.

Know more about combinations here:

https://brainly.com/question/28065038

#SPJ11

Plum Island Lighthouse can light up the harbor 974.44 feet away from its base.

The angle of depression refers to the angle at which an observer is looking down from an object to a point of reference below. If the angle of depression is increased, the distance from the object to the point of reference decreases. When there is a 2-degree angle of depression, the following formula is used to determine the distance between the observer and the point of reference (in this case, the harbor):tan θ = opposite/adjacent

where θ is the angle of depression, opposite is the height of the object, and adjacent is the distance between the object and the point of reference. Tan 2 = 34/x where x is the distance between the lighthouse and the harbor.tan 2 = 0.03492The angle of depression must be converted to radians to use a calculator.θ = 2π/360 = 0.03491 radians

Therefore,34/x = 0.03492x = 34/0.03492 = 974.44 feet.

Learn more about  angle of depression:https://brainly.com/question/27865363

#SPJ11

Answer:

≈283,39 mm^2

Step-by-step explanation:

The diameter is 19 mm, so the radius is half diameter (9,5 mm)

[tex]a = \pi \times {r}^{2} = 3.14 \times {9.5}^{2} = 3.14 \times 90.25 ≈ 283.39[/tex]

False to say that "cos(0) = 0." Cos(0) is equal to 1, as the input yields the x-coordinate of the spot on the circle for each arc in right spot, where first side coincides positive x-axis or final side spins clockwise first side.

What does it mean to coincide?

occupying the same location in time or space; coinciding; taking up the same spots on a scale. 3. Exactly concur.

Nevertheless, if the query is changed to ask for the angle that measures between 0 & 2 radians for which cos(x) = 0, the response is:

When x is equal to 2 or 3, cos(x) equals 0. The unit circle's corresponding points at these angles are, respectively, (0, 1) and (0, -1).

b. The sin(x) values for these angle measurements are:

As the equivalent point is at (0, 1) just on unit circle, sin(/2) equals 1.Due to (0, -1) being the corresponding point on the unit circle, sin(3/2) = -1.

therefore, False to say that "cos(0) = 0." Cos(0) is equal to 1, as the input yields the x-coordinate of the spot on the circle for each arc in right spot, where first side coincides positive x-axis or final side spins clockwise first side.

To know more about radians visit:

https://brainly.com/question/7721249

#SPJ1

Answer:

1.   No, the side lengths 3, 5, and 9 cannot make a triangle.

2.  If you are scaling an object by ¹/₃, it makes the object smaller.

     If the real object is 30 inches long, it is 10 inches once it is scaled.

3.  A cube has 6 faces.

     To find the volume, cube the side length:  6³ = 216 in³

Step-by-step explanation:

According to the Triangle Inequality Theorem, the sum of any two sides of a triangle is greater than the length of the third side.

As the sum of the two sides measuring 3 and 5 is 8, and 8 is not greater than 9, the side lengths 3, 5, and 9 cannot make a triangle.

Scaling an object reduces or enlarges its size. When scaling an object:

Therefore, if you are scaling an object by ¹/₃, the object becomes smaller, since ¹/₃ is between zero and 1.

To scale length, simply multiply the length by the scale factor.

Therefore, if a real object is 30 inches long, its length once it is scaled is:

[tex]\implies \sf 30 \times \dfrac{1}{3}=\dfrac{30}{3}=10\;inches[/tex]

A cube is a three-dimensional solid shape with six square faces.

The volume of a cube is the product of its width, length and height.

If the side of a cube measures 6 inches, its volume is:

[tex]\begin{aligned}\implies \sf Volume &=\sf 6 \times 6 \times 6 \\&= \sf 36 \times 6 \\&= \sf 216\;in^3\end{aligned}[/tex]

Answer:

See below, please.

Step-by-step explanation:

Ans 1.

In order to make a triangle, three line segments are needed, and the sum of the lengths of any two sides must be greater than the length of the remaining side. The side lengths 3, 5, and 9 cannot make a triangle because 3 + 5 is less than 9, which violates the triangle inequality.

Ans 2.

Scaling an object by 3 makes the object larger, as each dimension (length, width, and height) is multiplied by 3. If the real object is 30 inches long and is scaled by 3, it will be 90 inches long.

Ans 3.

A cube has 6 faces. To find the volume of a cube when one side measures 6 inches, we use the formula V = s^3, where s is the length of one side. Plugging in s=6, we get V = 6^3 = 216 cubic inches.

Answer:

25 Per Minute

Step-by-step explanation:

25 X 10 = 250

Hope This Helps! ^^

25 per minute

So if she stamped 250 envelopes in 10 minutes, we have to divide 250 by 10, which equals to 25!

In conclusion, the determinant of M being non-zero only guarantees that the equation has a unique solution, but it does not guarantee that it has a solution for every value of A.
If the determinant of M is not equal to zero, then A can be solved in terms of X or X can be solved in terms of A. This is because the matrix M is invertible when its determinant is non-zero. In other words, the matrix M has a unique inverse.
Here are the statements that are correct:
- Given any X, there is one and only one A which will satisfy the equation. This is because when the determinant of M is non-zero, the matrix M is invertible, and hence the equation can be uniquely solved for A in terms of X or for X in terms of A.
- Some values of A (such as A=0) will allow more than one X to satisfy the equation. This is because the determinant of M being non-zero only guarantees that the equation has a unique solution, but it does not guarantee that it has a solution for every value of A.
- Some values of X will have more than one value of A that satisfy the equation. This is true for any equation that has multiple solutions, regardless of the determinant of M.
- Some values of A will have no values of X that satisfy the equation. This is true for any equation that has no solution, regardless of the determinant of M.
- There is no value of X which satisfies the equation when A=0. This is because when A=0, the equation reduces to 0=0, which is true for any value of X.

for such more questions on  determinant

https://brainly.com/question/28207656

#SPJ11

A) 35. 8 million; thirty-five million eight hundred thousand, or thirty-five million eight hundred thousand dollars ,(b)115. 2 thousand; one hundred and fifteen thousand two hundred.(c) 97.8 million eight hundred thousand; 97.8 million eight hundred thousand. or 978 million.

What significance do numbers have?

We need good numeracy skills as parents to assist our children to develop, as patients to grasp healthcare information, and so as politicians to make sense of numbers and economic news. Selections in life were frequently based upon numerical data; in order to arrive at optimal decisions, we must be good at maths.

How are numbers used in everyday life?

Numbers are utilized in a variety of mathematical operations such as summation, subtraction, multiplication, division, percentage, and so on, that we employ in the everyday companies and exchanges. Quantities are numerical symbols representing integers that may be used for numbering, estimating, and doing other arithmetic operations.

To know more about integers click here

brainly.com/question/10930045

#SPJ4

When on a stem and leaf plot and it does not show a number on the right side and only on the right side, the number on the right side would be zero.

A stem and leaf plot is a method of organizing numerical data into groups. It is a visual representation of a dataset in which each value is separated into a stem and a leaf. A stem is the left-hand digit(s) of the value, while a leaf is the right-hand digit(s).

The stem and leaf plot contains two columns, one for the stem and the other for the leaf. The stem values are arranged vertically in the left-hand column, and the leaf values are arranged horizontally in the right-hand column. The leaf column should be read from left to right to extract the values.

When a value appears multiple times, its leaves are stacked on top of one another. The stem and leaf plot is an effective method for representing data, particularly when dealing with large datasets.

Hence, If a stem and leaf plot displays a number only on the left side and not on the right side, then the number on the right side would be interpreted as zero.


To know more about stem and leaf plot refer here:

https://brainly.com/question/12857419#

#SPJ11

Answer:

[tex]y = \frac{1}{7} x + 5[/tex]

Step-by-step explanation:

[tex]x - 7y = - 21[/tex]

[tex] - 7y = - x - 21[/tex]

[tex]y = \frac{1}{7} x + 3[/tex]

The answer is 1570. To evaluate the expression 547+233×5−142, we need to follow the order of operations, which is PEMDAS (parentheses, exponents, multiplication and division, and addition and subtraction).

There are no parentheses or exponents, so we start with multiplication and division from left to right.

233×5 = 1165

Then, we can simplify the expression to:

547 + 1165 - 142

Next, we add and subtract from left to right:

547 + 1165 = 1712

1712 - 142 = 1570

Find out more about PEMDAS

brainly.com/question/22161640

#SPJ4

To convert Wendall's measurements from inches to feet, we need to divide each measurement by 12, since there are 12 inches in a foot. So, the measurements in feet are:Length (in)Length (ft)242363484605To convert Stacey's measurements from feet to inches, we need to multiply each measurement by 12. So, the measurements in inches are:Length (ft)Length (in)6727848969108Therefore, the measurements of the wooden planks Wendall measured in feet are 2, 3, 4, and 5 feet, and the measurements of the wooden planks Stacey measured in inches are 72, 84, 96, and 108 inches.

According to a recent survey, nearly half of the respondents cited better pay as their primary reason for changing jobs.

The survey was conducted on a national level and the results indicate that a majority of people are looking to increase their earnings by switching jobs.

Other reasons are:

In conclusion, the survey clearly showed that the main reason for job changes among respondents was better pay. However, various other factors also play a role in an individual's decision to switch jobs, such as working conditions, career paths, and location.

To know more about changing jobs refer here:

https://brainly.com/question/20889936

#SPJ11

gtrgrghtrhthjAnswer:

Step-by-step explanation:

g

Answer:

36

Step-by-step explanation:

4*9=36

9*4=36

6*5=36

The four uppercase letters of the alphabet in block style with rotational symmetry are H, I, O, and X. Rotational symmetry refers to the property of a figure or object that appears identical after being rotated around a central point by a certain angle.

In block style writing, letters are written with straight lines and sharp corners, creating a uniform and geometric appearance. H, I, O, and X are the only uppercase letters that have rotational symmetry and can be written in block style.

H has a rotational symmetry of 180 degrees, meaning it looks the same when rotated 180 degrees around its center point.

I has a rotational symmetry of 180 degrees as well, with the dot above the letter acting as its center point.

O has a rotational symmetry of 360 degrees, meaning it looks the same when rotated any number of degrees around its center point.

Lastly, X has a rotational symmetry of 180 degrees, with the intersection of the two lines acting as its center point.

For more such questions on Rotational symmetry.

https://brainly.com/question/1531736#

#SPJ11

The triangle shown in the image above that has sides 8, 24, and 25 is a right triangle because it satisfies the Pythagorean theorem.

A triangle with sides 8, 24, 25 is a right triangle.

This is because the sides satisfy the Pythagorean theorem, which states that in a right triangle, the sum of the squares of the two shorter sides (the legs) is equal to the square of the longest side (the hypotenuse).

In this case, we have:

8² + 24² = 64 + 576 = 640

25² = 625

Since 8² + 24² = 25², the triangle satisfies the Pythagorean theorem, and is therefore a right triangle.

Learn more about right triangle on:

https://brainly.com/question/29869536

#SPJ1

The value of x using similar triangles theorem is = 13/3.

Triangles that resemble one another but may not be exactly the same size are said to be comparable triangles.

When two objects have the same shape but different sizes, they can be said to be comparable.

This indicates that comparable shapes superimpose one another when amplified or de-magnified.

The term "Similarity" refers to this characteristic of like shapes.

Now in the given figure,

the proportion of the triangles' side is same.

So, 12/4 = 13/x

x = 13/3

To know more about similar triangles, visit:

https://brainly.com/question/30725762

#SPJ1

The critical value of z for each hypothesis  test is 2.326

In this question, we are asked to use Excel to find the critical value of z for each hypothesis test. We are given a 2 percent level of significance for a two-tailed test. To find the critical value, we can use the NORM.S.INV function in Excel. The syntax for this function is =NORM.S.INV(probability).

We can enter the probability as 1 - (alpha / 2) for a two-tailed test, where alpha is the level of significance. We can then round the result to three decimal places.

To find the critical value for a 2 percent level of significance, two-tailed test, we can follow these steps:

Step 1: Calculate the value of alpha

Alpha = 2% = 0.02

Step 2: Calculate

1 - (alpha / 2)1 - (alpha / 2)

= 1 - (0.02 / 2)

= 0.99

Step 3: Use the NORM.S.INV function in Excel=NORM.S.INV(0.99)

This gives us a critical value of z = 2.326.

Therefore, the critical value of z for the hypothesis test with a 2 percent level of significance and a two-tailed test is 2.326.

To learn more abouth hypothesis test: https://brainly.com/question/25263462

#SPJ11

We can ensure trigonometric functions compute values appropriately by validating the results against known values. In order to ensure that the argument is in a short interval surrounding a place where an approximation is highly accurate, one performs a range reduction prior to computing things like a cos or sin.

By comparing the results to established values, we can make sure trigonometric functions compute values correctly. As an example, if we wanted to validate the cosine of 45 degrees, we could compare the result to the known value of 0.707. If the computed value is within a small margin of error of the known value, then we can assume the trigonometric function is computing values appropriately.

In order to calculate functions like cos or sin, one must first perform a range reduction to make sure the input is inside a narrow range surrounding a point where an approximation is highly accurate. It is typically close to zero.

To learn more about trigonometric functions link is here

brainly.com/question/6904750

#SPJ4

Answer:

Step-by-step explanation:

Credits : sqdancefan (Brainly.com)

I changed some of it myself  :)

Answer:

A) intercept: 0 profit : Maximum(max) : max profit. increasing x <4 ; decreasing x > 4

B) average slope: ≈50, about $50 increasing profit for each $1 increasing in price.

Step-by-step explanation:

A) The vertical axis of the graph represents profit, so the x-intercepts represent prices in the produce 0 profit. The maximum value of the graph is the maximum profit that can be obtained for anyprice

The higher or largest number of the chart is the maximum reach

B) We read the value of f(1) from the graph to be about 120, so the average rate of change is about ...

(f(4) -f(1))/(4 -1) = (270 -120)/(3) = 50

The average rate of the change from x = 1 to x = 4 is about 50.* This means profit will increase on average $50 for each $1 increase in price in what interval.

______

* if we take the peak profit to be $270 we can write f(x) as ...

f(x) 16.875x(x-8)

Then f(1) = 118.15 ad average rate if changed is 50.625. For the purpose here, we judge the extra precision to be pointless

The overall height of the framed picture is 89cm in the total.

The mount is 6 cm across the top and sides and 9 cm across the bottom. As a result, the mount's overall height will be:

45 cm = 6 cm (top) + 30 cm (image height) + 9 cm (bottom).

The mount's entire breadth will be:

6 cm (left) + 40 cm (width of the image) + 6 cm (right) = 52 cm

To get the total height of the framed image, multiply the height of the mount by the height of the picture by twice the width of the frame (since the frame goes around all four sides of the picture).

As a result, the overall height of the framed image will be:

45 centimetre plus 40 cm plus 2(2 cm) Equals 89 cm.

Learn more about area and geometry at

https://brainly.com/question/13487289

#SPJ4

Certainly, there is a significant difference in the mean amount of e.coli bacteria detected by the two methods for this type of beef. This can be supported statistically by conducting a hypothesis test.

           The null hypothesis ([tex]H_0[/tex]) is that there is no significant difference in the mean amount of E. coli bacteria detected by the two methods. The alternative hypothesis ([tex]H_a[/tex]) is that there is a significant difference in the mean amount of e.coli bacteria detected by the two methods.

          The two-sample t-test can be used to test the hypothesis. The t-test compares the means of two independent groups and determines whether they are significantly different. The t-test assumes that the two samples are normally distributed and have equal variances.

          If the sample sizes are large, then the t-test can still be used even if the samples are not normally distributed.

          The formula for the t-test is:

                   [tex]t = (x_1 - x_2) / [s^2(1/n_1 + 1/n_2)][/tex]

       Where:

                     [tex]x_1[/tex] = the sample mean for method 1

                     [tex]x_2[/tex] = the sample mean for method 2

                     [tex]s^2[/tex] = the pooled variance of the two samples

                     [tex]n_1[/tex] = the sample size for method 1

                     [tex]n_2[/tex] = the sample size for method 2

        The t-value can then be compared to the critical value of  [tex]t[/tex] for the desired level of significance (usually 0.05).

         If the t-value is greater than the critical value of [tex]t[/tex], then the null hypothesis can be rejected and it can be concluded that there is a significant difference in the mean amount of E. coli bacteria detected by the two methods.

Learn more about a significant difference in the mean amount at: https://brainly.com/question/14724376

#SPJ11

Step-by-step explanation:

(explanation is given in your another question please check)

Answer:

Approximately 1.05 × 10⁹ pounds of food are consumed by African elephants in one day.

Step-by-step explanation:

Answer:

Step-by-step explanation:

its 7 or 6\

The arithmetic mean return is 3.6%, and the standard deviation is 2.14%.

To find the arithmetic mean, we add up the five returns and divide by the number of returns (in this case, 5):

(3% + 6% + 0% + 6% + 3%) / 5 = 3.6%

To find the standard deviation, we first need to find the variance. We can do this by taking each return, subtracting the mean return (3.6%), squaring the result, summing these values, and dividing by the number of returns minus 1 (4 in this case):

((3% - 3.6%)^2 + (6% - 3.6%)^2 + (0% - 3.6%)^2 + (6% - 3.6%)^2 + (3% - 3.6%)^2) / 4 = 0.046

The standard deviation is the square root of the variance:

√0.046 = 0.214 or 2.14%

Therefore, the arithmetic mean return for security y is 3.6%, and the standard deviation (sample) is 2.14%.


To know more about arithmetic mean, refer here:

https://brainly.com/question/13000783#

#SPJ11