The current I(r) at a time after 1*r equals the time constant r is roughly 0.065 A. About 0.105 A is the current I(3r) at a point three times the time constant after 3*r.
What is the circuit's current I?Electric current (I) flowing through a circuit directly relates to its potential difference (V). When the potential difference is 60 volts, the electric current is 1.5 amps.
The following equations can be used to calculate the current in the RL circuit based on the information provided:
An RL circuit's current is determined by:
I(t) = (V/R) * (1 - e(-t/r))
The following queries can be resolved using this equation:
Question 1:
What is the current I(r) after 1*r equals the time constant r?Add t = r to the equation as follows:
I(r) = (V/R) * (1 - e(-r/r))
I(r) = (V/R) * (1 - e(-1))
I(r) = (12.0/150) * (1 - e(-1))
I(r) ≈ 0.065 A
As a result, the current I(r) at a time after 1*r equals the time constant r is approximately 0.065 A.
Question 2:
What time is it now, I(3r), after 3*r, which is three times the time constant?
In the following equation, substitute t = 3r:
I(3r) = (V/R) * (1 - e(-3))
I(3r) = (12.0/150) * (1 - e(-3))
I(3r) ≈ 0.105 A
As a result, the current I(3r) at a time three times the time constant after 3*r is about 0.105 A.
Question 3:
After some time, the circuit's current will begin to approach a constant value, I. (as t tends to infinity). Who am I?
The exponential term e(-t/r) approaches 0 as t approaches infinity, and the current becomes:
I∞ = V/R
Substitute V = 12.0 V and R = 150 Ω into the equation:
I∞ = 12.0/150
I∞ = 0.08 A
As a result, after some time, the circuit's current will stabilize around 0.08 A.
To know more about current visit:-
https://brainly.com/question/15632994
#SPJ1
Question:
After the switch is closed, the current in the circuit grows over time approaching a constant value. In general, at time after a voltage source is connected to an RL circuit, the current I(t) in the circuit is given by the expression
1(t)=(1-e); where r = L/R
where & is the voltage provided by the battery, R is the resistance of the resistor, and r is the time constant characteristic of the circuit.
Growth of current in an RL circuit
Consider an R-L circuit as shown in the figure. The battery provides 12.0 V of voltage. The inductor has inductance L, and the resistor has resistance R = 150 . The switch is initially open as shown. At time r=0, the switch is closed. At time / after 0 the current /(1) flows through the circuit as indicated in the figure.
Question 1:
What is the current (r) at a time after 1-0 equal to time constant?
Question 2:
What is the current /(3r) at a time after 1-0 equal to three times the time constant?
Question 3:
The current in the circuit will approach a constant value / after a long time (as / tends to infinity). What is I.?
a child stands with each foot on a different scale. the left scale reads 200 n and the right scale reads 250 n. what is her mass in kg? the acceleration due to gravity is 9.8 m/s2? group of answer choices 36 kg 350 kg 3430 kg 45.9 kg
The mass of the child is 45.9 kg. Therefore, the answer is option D.
Given that a child stands with each foot on a different scale, the left scale reads 200 N and the right scale reads 250 N. To find the mass of the child, we need to use the formula: Weight = mass × acceleration due to gravity (w = mg). The acceleration due to gravity is 9.8 m/s². Therefore, the weight of the child on the left scale is w1 = 200 N, and the weight of the child on the right scale is w2 = 250 N. We can use these two weights to calculate the mass of the child. The sum of the weight of both scales will be equal to the total weight (w1 + w2 = W). Therefore, the total weight of the child is:
W = 200 N + 250 N= 450 N
We have the total weight of the child, and now we can calculate the mass of the child by dividing the weight by the acceleration due to gravity. Therefore, the mass of the child is:
m = W/g
= 450 N / 9.8 m/s²
= 45.92 kg
To learn more about Mass :
https://brainly.com/question/86444
#SPJ11
determine the total power delivered to the circuit (i.e., the total power dissipated in the resistors)
To determine the total power delivered to the circuit (i.e., the total power dissipated in the resistors), you can use the formula:
P = I²R ; where P is the power in watts, I is the current in amperes, and R is the resistance in ohms.
To find the current, you can use Ohm's law:
V = IR
where V is the voltage in volts, I is the current in amperes, and R is the resistance in ohms.
Here's an example:
Suppose you have a circuit with two resistors, R1 and R2, connected in series.
The voltage across the circuit is 10 volts, and the resistances of the two resistors are 2 ohms and 4 ohms, respectively. You can find the total resistance of the circuit by adding the resistances of the two resistors:
R = R1 + R2 = 2 + 4 = 6 ohms
To find the current in the circuit, you can use Ohm's law:
I = V/R = 10/6 = 1.67 amps
Then, you can find the power dissipated in each resistor:
P1 = I²R1 = (1.67)²(2) = 5.56 wattsP2 = I²R2 = (1.67)²(4) = 11.11 watts
And finally, you can find the total power dissipated in the circuit by adding the power dissipated in each resistor:Ptotal = P1 + P2 = 5.56 + 11.11 = 16.67 watts
So the total power delivered to the circuit is 16.67 watts.
Learn more about total power here:
https://brainly.com/question/21671958#
#SPJ11
what two forces act on a monkey hanging stationary by a vertical vine? which force, if either, is greater?
Two forces act on a monkey hanging stationary by a vertical vine: gravity and the tension of the vine. Gravity is the greater force in this situation because it is a constant force that acts downwards.
The two forces that act on a monkey hanging stationary by a vertical vine are tension and gravity. The tension force acts along the vine and pulls the monkey upwards, while the gravity force acts downwards towards the center of the Earth.
If the monkey is stationary, then the two forces are equal in magnitude and opposite in direction. This is because the tension force is balancing the gravity force, resulting in no net force acting on the monkey.
Therefore, if neither of the forces are greater than the other as they are equal in magnitude and opposite in direction.What is tension force?The force exerted by a string, rope, chain, or similar object on another object that it is connected to is referred to as tension. The tension is always directed along the length of the string and away from the object's surface that the string is attached to. When an object is suspended from a rope, the tension force on the rope is equal to the weight of the object (due to gravity), and this tension force is transmitted through the rope to any other objects that the rope is attached to.
For more details about gravity, click on the below link:
https://brainly.com/question/13634821
#SPJ11
based on computer models, when is planetary migration most likely to occur in a planetary system? based on computer models, when is planetary migration most likely to occur in a planetary system? shortly after a stellar wind clears the gaseous disk away late in its history, when asteroids and comets occasionally collide with planets early in its history, when there is still a gaseous disk around the star
According to computer models, planetary migration is most likely to occur in a planetary system early in its history, when there is still a gaseous disk around the star.
What is planetary migration?Planetary migration is the process by which a planet changes its orbital position over time. The process is often caused by gravitational interactions with other planets or a planetesimal disk, which causes the planet to migrate inward or outward from its original orbit.
Other factors that can contribute to planetary migration include the late stages of a star's evolution when a stellar wind clears the gaseous disk away and asteroids and comets occasionally collide with planets.
However, early in a planetary system's history, when there is still a gaseous disk around the star, is the most likely time for planetary migration to occur.
To know more about planetary migration:
https://brainly.com/question/29360183
#SPJ11
Convert the following to Fahrenheit 1) 10° C 50 °F = 1.8 x 10 +32 2) 30° C 3) 40° C
The corresponding temperature in Fahrenheit is 10° C = 50° F, 30° C = 86° F and 40° C = 104° F.
What is the corresponding temperature in Fahrenheit?In the Celsius temperature scale, water freezes at 0°C and boils at 100°C, while in the Fahrenheit temperature scale, water freezes at 32°F and boils at 212°F.
The conversion formula for Celsius to Fahrenheit is F = 1.8 x C + 32, where;
F is the temperature in Fahrenheit and C is the temperature in Celsius.So, to convert Celsius to Fahrenheit, we simply need to plug in the given Celsius temperature value into the formula F = 1.8 x C + 32, and then solve for F.
Let's take the first example of 10°C:
F = 1.8 x C + 32
F = 1.8 x 10 + 32
F = 18 + 32
F = 50°F
Therefore, 10°C is equivalent to 50°F in Fahrenheit.
Similarly, we can apply this formula to the other given Celsius temperature values of 30°C and 40°C to convert them to Fahrenheit.
30° C = 86° F (F = 1.8 x 30 + 32)
40° C = 104° F (F = 1.8 x 40 + 32)
Learn more about Fahrenheit temperature here: https://brainly.com/question/30391112
#SPJ1
how much energy is stored by the electric field between two square plates, 9.3 cm on a side, separated by a 2.5- mm air gap? the charges on the plates are equal and opposite and of magnitude 13 nc .
The electric field stored between two square plates of 9.3 cm on a side and separated by a 2.5 mm air gap is 1110 N/C. This can be calculated using Coulomb's law and the given information.
Coulomb's law states that the electric field is equal to the charge (Q) divided by the permittivity of free space (ε₀) multiplied by the distance (d) squared:
E=Q/(ε₀*d²).
Plugging in the given information,
E=(13 nC)/(8.85 x 10⁻¹² * 0.0025²) = 1110 N/C.
This answer uses Coulomb's law to calculate the electric field stored between two square plates, given the plates' side lengths, air gap width, and charge magnitude.
Learn more about Coulomb's law at https://brainly.com/question/506926
#SPJ11
what kind of pressure prevents a white dwarf from collapsing?
Answer:
The type of pressure that prevents a white dwarf from collapsing is the electron degeneracy pressure.
What is a white dwarf?A white dwarf is a stellar remnant of a low or medium-mass star that has died, formed by a white dwarf supernova.
White dwarfs are composed of electron-degenerate matter, a type of fermionic matter that is extremely dense.The inward gravitational force of a star causes it to compress and heat up as its hydrogen fuel runs out. The temperature at the center of a star reaches a few million degrees Celsius, allowing the helium in the core to undergo nuclear fusion. The star's outer layers are blown away as a result of the fusion process, leaving behind a hot and dense core called a white dwarf. This core is not supported by internal fusion reactions, and its heat energy is gradually lost through radiative cooling.How does a white dwarf stay stable?
The white dwarf's stability is maintained by electron degeneracy pressure, which is the result of electrons being packed so tightly in the star's core that they are forced to behave like a gas, rather than a collection of individual particles.
The quantum mechanical Pauli exclusion principle governs the behavior of these electrons, which prohibits two fermions from occupying the same quantum state at the same time.
As a result, each electron is forced into a higher-energy state, resulting in a pressure that resists gravitational compression.
Therefore, the type of pressure that prevents a white dwarf from collapsing is the electron degeneracy pressure.
To know more about white dwarf:
https://brainly.com/question/14034412?
#SPJ11
the potential energy increases everywhere by a fixed positive value. how does the force magnitude change?
When potential energy increases everywhere by a fixed positive value, the force magnitude does not change.
This is because potential energy is a function of position and does not depend on the force acting on the object. However, the rate of change of potential energy concerning displacement (or position) gives the force acting on the object, which is known as the force of the conservative system
Given: The potential energy increases everywhere by a fixed positive value
We know that potential energy is a function of position and does not depend on the force acting on the object.The rate of change of potential energy with respect to displacement (or position) gives the force acting on the object, which is known as the force of the conservative system.
Since the potential energy increases everywhere by a fixed positive value, it means the force magnitude does not change.
To know more about potential energy click here:
https://brainly.com/question/24284560
#SPJ11
the intensity of sound in a typical classroom is approxiamtely 10^-7 w/m2. what is the sound level for this noise/
The sound level for this noise is approximately 50 decibels.
Sound level is a logarithmic measure of the ratio between the sound pressure level of a particular sound wave and a reference level. The reference level is typically set at the threshold of human hearing, which corresponds to an intensity of 10^-12 W/m^2. The sound level (measured in decibels, dB) of a sound wave is given by,
L = 10 log10(I/I0)
where I is the intensity of the sound wave and I0 is the reference intensity, which is typically set at 10^-12 W/m^2.
So, for an intensity of 10^-7 W/m^2 in a typical classroom, we can calculate the sound level as,
L = 10 log10(I/I0) = 10 log10(10^-7/10^-12) = 10 log10(10^5) = 50 dB
To know more about sound, here
brainly.com/question/30546291
#SPJ4
select all that apply select all the stars that would have the same luminosity. (use the stefan-boltzmann law.) presented are the radii and temperatures of five stars compared to the sun.
According to the Stefan-Boltzmann law, the luminosity of a star is directly proportional to the fourth power of its temperature and its radius squared.
The formula for luminosity is:L = 4πR²σT⁴where L is the luminosity, R is the radius, T is the temperature, and σ is the Stefan-Boltzmann constant (5.67 × 10⁻⁸ W/m²K⁴).To determine which stars would have the same luminosity as the sun, we need to compare their luminosity values using the given data. The radii and temperatures of five stars compared to the sun are as follows:Star A: R = 2R⊙, T = 6000 KStar B: R = R⊙, T = 3000 KStar C: R = 0.1R⊙, T = 6000 KStar D: R = 10R⊙, T = 3000 KStar E: R = 2R⊙, T = 15000 KSubstituting the values in the formula, we get:L⊙ = 4π(1²)(5.67 × 10⁻⁸)(5778⁴) ≈ 3.828 × 10²⁶ Wm¹²Star A: L = 4π(2²)(5.67 × 10⁻⁸)(6000⁴) ≈ 1.84 × 10³³ Wm¹²Star B: L = 4π(1²)(5.67 × 10⁻⁸)(3000⁴) ≈ 6.86 × 10²⁹ Wm¹²Star C: L = 4π(0.1²)(5.67 × 10⁻⁸)(6000⁴) ≈ 6.95 × 10²³ Wm¹²Star D: L = 4π(10²)(5.67 × 10⁻⁸)(3000⁴) ≈ 5.48 × 10³⁴ Wm¹²Star E: L = 4π(2²)(5.67 × 10⁻⁸)(15000⁴) ≈ 5.12 × 10³³ Wm¹²
The luminosity values of the stars are as follows:Star A: L ≈ 1.84 × 10³³ Wm¹²Star B: L ≈ 6.86 × 10²⁹ Wm¹²Star C: L ≈ 6.95 × 10²³ Wm¹²Star D: L ≈ 5.48 × 10³⁴ Wm¹²Star E: L ≈ 5.12 × 10³³ Wm¹²Comparing the luminosity values with that of the sun, we can see that stars A and E would have the same luminosity as the sun.
Therefore, the correct answer is: Stars A and E
To know more about luminosity click on below link :
https://brainly.com/question/14140223
#SPJ11
if the coconut from the taller tree reaches the ground with a speed v , what will be the speed (in terms of v ) of the coconut from the other tree when it reaches the ground?
Since both coconuts fall the same distance, they will reach the ground with the same speed (v). The speed of the coconut from the other tree when it reaches the ground is equal to the speed of the coconut from the taller tree (v).
The speed of the coconut from the other tree when it reaches the ground is equal to the speed of the coconut from the taller tree (v). This is because the force of gravity is the same on both coconuts and they experience the same acceleration. This means that they will reach the ground with the same speed, regardless of the height of the tree they are falling from.
The gravitational acceleration (g) is a constant and is independent of the mass of the coconut. Since both coconuts have the same mass, they will experience the same force of gravity, resulting in the same acceleration. This acceleration is independent of the initial height of the coconut, meaning that the coconuts will reach the ground with the same speed regardless of their initial height.
The speed (v) of the coconuts when they reach the ground is determined by their initial speed at the top of the tree (v0) and the distance they fall (d). If the initial speed is 0 (which is the case when the coconut is released from rest) then the final speed is determined by the distance the coconut has fallen (d). According to the equation v2 = 2gx, v = sqrt(2gd), where g is the gravitational acceleration and d is the distance fallen. Therefore, since both coconuts fall the same distance, they will reach the ground with the same speed (v).
For more such questions on Gravity.
https://brainly.com/question/14874038#
#SPJ11
trying to solve this please i need help asap
The force from student is positive, the force due to gravity is zero and the frictional force due to air is negative.
Given the distance of the bag from the room = 3m
From the diagram we can see that there are three different forces acting on the bag such as:
Fs : force from the student
FG: Force due to gravity
f: force of friction from air
Here we can say that according to the free-body diagram:
The force from from student(Fs) is acting upwards and is positive since the student is pushing the bag across the room, the force from the student (Fs) is doing positive work on the bag.
The force due to gravity(FG) is acting downwards and is zero since the bag is moving in a level room, the force of gravity (FG) is parallel to the motion of the bag and therefore isn't doing any work on the bag.
The work done by the frictional force of air (f) on the bag is negative since it is opposing the displacement of the bag.
To learn more about force click here https://brainly.com/question/13191643
#SPJ1
if a current of 5.5 a is used, what is the force generated per unit field strength on the 20.0 cm wide section of the loop? use units of newtons per tesla.
The force generated per unit field strength on a 20.0 cm wide section of the loop with a current of 5.5 A is: 0.001 newtons per tesla
The force generated per unit field strength on a 20.0 cm wide section of the loop with a current of 5.5 A is given by the formula F = (μI) / 2πr,
where μ is the permeability of free space, (4π x 10-7 N/A²)
I is current, and r is the radius of the loop.
In this case, the force is (4π x 10-7 x 5.5) / (2π x 0.1) = 0.001 N/T.
In other words, the force generated per unit field strength on a 20.0 cm wide section of the loop with a current of 5.5 A is 0.001 newtons per tesla.
The formula for the force generated per unit field strength on a loop is derived from the fact that the force is a result of the magnetic field generated by the current flowing in the loop.
The magnitude of the magnetic field generated is proportional to the current and inversely proportional to the radius of the loop. Since the force is a product of the current and the magnetic field, it is proportional to the square of the current and inversely proportional to the square of the radius of the loop.
In summary, the force generated per unit field strength on a 20.0 cm wide section of the loop with a current of 5.5 A is 0.001 newtons per tesla, given by the formula F = (μI) / 2πr, where μ is the permeability of free space (4π x 10-7 N/A²), I is current, and r is the radius of the loop.
To know more about force refer here:
https://brainly.com/question/13191643#
#SPJ11
What would you expect the force to be if the distance was 30 meters? How did you come up with your answer?
The force would be 6 Newtons for a distance of 30 metres.
What connection exists between distance and force?A force is defined as any influence that results in a change in an object. Distance is the amount of distance that an object moves over time. A force is applied to an item, and the more force is applied, the farther the thing will move.
What is distance-based force?Action-at-a-distance forces are those that develop even when the two interacting objects are not in close proximity to one another but are nevertheless able to push or pull against one another despite this physical gap.
To know more about Newtons visit:-
https://brainly.com/question/16889018
#SPJ1
what is the frequency of a standing wave with a wave speed of 12 m/s as it travels on a 4.0-m string fixed at both ends?
The frequency of a standing wave with a wave speed of 12 m/s as it travels on a 4.0-m string fixed at both ends is 3.0 Hz.
What Is A Standing Wave?A standing wave is produced by a wave with the same amplitude, frequency, and wavelength moving in the opposite direction with the initial wave. This indicates that the wave appears to stand in one place. Standing waves can only be generated in a medium if there is a boundary that restricts the movement of the wave. Standing waves can be observed in various shapes and sizes, and their frequencies are determined by a variety of factors, including the wave speed and the length of the string. When a standing wave is generated in a string, the points where the wave appears to be fixed are known as nodes, while the points where the string vibrates with the most amplitude are known as antinodes.In this scenario, the wave speed and the length of the string are given.
The wave speed, frequency, and wavelength of a wave are related by the formula v = fλ, where v is the wave speed, f is the frequency, and λ is the wavelength. Since the length of the string is fixed, the wavelength of the standing wave is twice the length of the string. Thus, λ = 2L = 8 m. Plugging in the values for the wave speed and wavelength, the frequency can be calculated as follows:f = v / λ = 12 m/s / 8 m = 1.5 Hz. The frequency of a standing wave with a wave speed of 12 m/s as it travels on a 4.0-m string fixed at both ends is 3 Hz.
Learn more about a standing wave at https://brainly.com/question/29558685
#SPJ11
a track star runs a 400-m race on a 400-m circular track in 45 s. what is his angular velocity assuming a constant speed?
The angular velocity assuming a constant speed for a track-star who runs 400 m circular track in 45 s is 0.139 radians/s.
To calculate the angular velocity first the circumference of the track is 400 meters.
This means that the angular displacement of the track star during the race is:
θ = s / r
where θ is the angular displacement,
s is the distance traveled by the track star (which is equal to the circumference of the track), and
r is the radius of the circular track.
2.) Since the radius of the circular track is half of its diameter, we have:
r = 400 m / 2 = 200 m
Plugging this into the equation for angular displacement, we get:
θ = 400 m / 200 m = 2π radians
3.) Next, we can use the formula for angular velocity:
ω = θ / t
where ω is the angular velocity and
t is the time it takes for the track star to complete the race.
4.)Plugging in the values we have:
ω = θ / t
ω = 2π radians / 45 s
Therefore, the angular velocity of the track star is:
ω = 0.139 radians/s (rounded to three significant figures)
Therefore, the track star's angular velocity assuming a constant speed is approximately 0.139 radians/s
The angular displacement of the track star is equal to one complete revolution around the circular track, which is equal to 2π radians.
To practice more questions about angular velocity: https://brainly.com/question/6860269
#SPJ11
an airplane flying horizontally with a speed of 500 km/h at a height of 800 m drops a crate of supplies. if the parachute fails to open, how far in front of the release point does the crate hit the ground? use si units.
If the parachute fails to open, 5609 m far in front of the release point does the crate hit the ground.
Break the motion of particle into two direction
1) vertical direction
2) horizontal direction
in vertical direction = [tex]V_{oy}[/tex]=0 m/s a=-9·8 m/s2
= Y = -800m t = time fraud
Y = [tex]V_{oy}[/tex] t + 1/2 at^2 = -800 = 0 + 1/2(-9.8)(t^2)
so, t = 12.785
in horizontal direction = [tex]V_{ox}[/tex] = 500 x 5/18 +300= 438.39m/s
t = 12.7885 & x = distance From releasing point
So, x = [tex]V_{ox}[/tex] t = (438.89) (12.78) = 5609m
X = 5609 m
The motion of a particle refers to its movement in space with respect to a particular reference point. This can include its speed, direction, and acceleration. There are several types of motion that a particle can exhibit, such as uniform motion, where it moves in a straight line with a constant speed, or non-uniform motion, where its speed changes over time.
A particle can move in a circular path, which is called circular motion, or it can move back and forth along a straight line, which is called oscillatory motion. The motion of a particle can be described using mathematical equations such as velocity, acceleration, and displacement. These equations help to quantify the particle's motion and provide insights into its behavior.
To learn more about Motion of particle visit here:
brainly.com/question/23148906
#SPJ4
A student holds a 0.06 kg egg out a window. Just before the student releases the egg, the egg has a 8.0 J of gravitational potential energy with respect to the ground. How far is the students arm from the ground? a.) 133m b.) 13.3m c.) 0.8m d.) 0.08m
if a star is 11 pc away from us, will its apparent visual magnitude be higher or lower than its absolute visual magnitude? what if the star is 5 pc away?
If a star is 11 pc away from us, its apparent visual magnitude will be lower than its absolute visual magnitude. The star's apparent magnitude would be only 0.38 magnitudes lower than its absolute magnitude.
This is because the apparent magnitude of a star is affected by its distance from us. As the distance increases, the star appears dimmer, and its apparent magnitude decreases.
The distance modulus formula gives us a way to calculate the difference between the apparent and absolute magnitudes of a star:
Distance modulus = 5 * log(distance in parsecs) - 5
For a star that is 11 pc away, the distance modulus is,
Distance modulus = 5 * log(11) - 5 = 1.38
This means that the star's apparent magnitude will be 1.38 magnitudes lower than its absolute magnitude.
If the same star were only 5 pc away from us, the distance modulus would be,
Distance modulus = 5 * log(5) - 5 = 0.38
In this case, the star's apparent magnitude would be only 0.38 magnitudes lower than its absolute magnitude. This means that the star would appear brighter and have a higher apparent magnitude when it is closer to us.
To know more about stars, here
brainly.com/question/10176629
#SPJ4
a planet of mass 4 x 10^14 kg is orbiting a parent star 548 km away. if the star is 83 times the mass of the planet, what speed must the planet have to keep a perfectly circular orbit around the star?
To find the speed of the planet in a perfectly circular orbit around the star, we can use the equation v = sqrt(Gm2 / r). Plugging in the given values, we get v = 1843.3 m/s. Therefore, the planet must have a speed of approximately 1843.3 m/s.
if the same horizontal net force were exerted on both vehicles, pushing them from rest over the same distance, what is the ratio of their final kinetic energies?
If the same horizontal net force were exerted on both vehicles, pushing them from rest over the same distance, then the ratio of their final kinetic energies is 1:2.
According to the Work-Energy principle, the net work done on an object is equal to the change in its kinetic energy. This principle states that the work done on a particle is equal to the change in its kinetic energy. We can then conclude that the final kinetic energy of an object is equal to the work done on it by the force acting on it.
Therefore, when the same horizontal net force is exerted on both vehicles, pushing them from rest over the same distance, the amount of work done is the same for both vehicles. Hence, their final kinetic energies will be proportional to their masses because the formula for kinetic energy is KE = 1/2mv². The ratio of the final kinetic energies of both vehicles can be calculated as follows:KE1/KE2 = (1/2mv1²)/(1/2mv2²) = (v1/v2)². Here, v1 and v2 are the final velocities of the two vehicles. Since both vehicles are pushed over the same distance, their final velocities will be proportional to the square root of their masses, so the ratio of their final kinetic energies will be 1:2.
Learn more about kinetic energy at:
https://brainly.com/question/22174271
#SPJ11
find the equivalent capacitance of a 4.20-mf capacitor and an 8.50-mf capacitor when they are connected (a) in series and (b) in parallel
(a) The equivalent capacitance of the 4.20 µF and 8.50 µF capacitors when connected in series is approximately 4.2017 µF.
(b) The equivalent capacitance of the 4.20 µF and 8.50 µF capacitors when connected in parallel is 12.70 µF.
When two capacitors are connected in series, the equivalent capacitance is given by the formula,
1/Ceq = 1/C1 + 1/C2
where C1 and C2 are the capacitances of the two capacitors.
Substituting the given values,
1/Ceq = 1/4.20 µF + 1/8.50 µF
1/Ceq = 0.238 µF^-1
Ceq = 1 / (0.238 µF^-1)
Ceq = 4.2017 µF (rounded to four significant figures)
When two capacitors are connected in parallel, the equivalent capacitance is given by the formula,
Ceq = C1 + C2
where C1 and C2 are the capacitances of the two capacitors.
Substituting the given values,
Ceq = 4.20 µF + 8.50 µF
Ceq = 12.70 µF
To know more about capacitor, here
brainly.com/question/29311704
#SPJ4
a 200 ohm, 250 ohm and 1000 ohm resistor are connected in parallel across a source. the source current is 6a. how much is the current that flows through the 200 ohm resisto
The current that flows through the 200 Ω resistor is 1.56 A.
Given resistance values of 200 Ω, 250 Ω, and 1000 Ω are connected in parallel across a source. The source current is 6 A. We are required to find the current that flows through the 200 Ω resistor.
Recall that when resistors are connected in parallel, the current is divided among them. And the voltage across each resistor is the same. The equivalent resistance of three parallel resistors is given by;
1/Rp = 1/R1 + 1/R2 + 1/R3Rp = (R1 x R2 x R3)/(R1R2 + R1R3 + R2R3)
Put the values into the formula;
Rp = (200 x 250 x 1000)/(200×250 + 200×1000 + 250×1000)
Rp = 52.17 Ω
The total current in the circuit, It = 6 A
From Ohm's Law;
V = IR,
where V is the voltage across each resistor
V1 = V2 = V3V = I×R
Therefore; V = I×Rp
The current flowing through the 200 Ω resistor, I1 = V1/200 = I × Rp/200The current flowing through the 200 Ω resistor, I1 = (6×52.17)/200I1 = 1.56 A
Thus, the current that flows through the 200 Ω resistor is 1.56 A.
To know more about Parallel current, refer here:
https://brainly.com/question/27986190#
#SPJ11
jeff 60 kg and julia 45 kg are in two separate bumper cars 130 each. jeff was moving at 4 m/s north while julie was going 6 m/s west. julia bounces off going 2 m/s at an angle of 15 s of w. what is the final velocity and direction of jeff car
Final velocity of Jeff's car is 7.133 m/s south. The direction is 59.3° south of east.
In this issue, we can utilize preservation of energy to track down the last speed and course of Jeff's crash mobile after the impact with Julia's. Before the impact, the energy in the x-heading is zero, and in the y-course, it is 60 kg × 4 m/s = 240 kg⋅m/s north. Julia's force is 45 kg × 6 m/s = 270 kg⋅m/s west.After the crash, the energy in the x-course is rationed. The absolute energy in the x-course is as yet zero, as Julia's force that way is likewise zero. In the y-heading, the absolute force after the crash is 60 kg × vj + 45 kg × 2 m/s sin 15°, where vj is Jeff's last speed in the y-course.Utilizing protection of energy, we can compare the force when the crash in the y-heading:
60 kg × 4 m/s + 45 kg × 6 m/s = 60 kg × vj + 45 kg × 2 m/s sin 15°
Working on this situation, we get:
240 kg⋅m/s + 270 kg⋅m/s = 60 kg × vj + 12.19 kg⋅m/s
Addressing for vj, we get:
vj = (240 kg⋅m/s + 270 kg⋅m/s - 12.19 kg⋅m/s)/60 kg
vj = 7.133 m/s south
Consequently, Jeff's last speed is 7.133 m/s south. To find the course, we can utilize geometry. The point of Jeff's last speed concerning the x-pivot is given by:
θ = tan^-1(vj/4 m/s)
θ = 59.3° south of east
Accordingly, the last speed and heading of Jeff's amusement cart are 7.133 m/s at a point of 59.3° south of east.
To learn more about final velocity and direction, refer:
https://brainly.com/question/12634477
#SPJ4
what is the torque produced by a force of magnitude 90 n that is exerted perpendicular to and at the end of a 0.5m long wrench
Torque is a measure of the twisting force that is produced when a force is applied to an object and is defined as the product of the force.
The distance from the pivot point to the point of application of the force, multiplied by the sine of the angle between the force vector and the vector from the pivot point to the point of application of the force.
In this case, the force of 90 N is applied perpendicular to the end of a wrench that is 0.5 m long. Assuming the force is applied at the end of the wrench, the distance from the pivot point to the point of application of the force is 0.5 m. Since the force is perpendicular to the wrench.
The angle between the force vector and the vector from the pivot point to the point of application of the force is 90 degrees. Using the formula for torque, the torque produced by the force is: Torque = force x distance x sin(angle)
Torque = 90 N x 0.5 m x sin(90)Torque = 45 Nm
Therefore, the torque produced by the force of magnitude 90 N that is exerted perpendicular to and at the end of a 0.5m long wrench is 45 Nm.
Learn more about force here:
https://brainly.com/question/13191643
#SPJ4
determine the intensity of electromagnetic waves from the sun just outside the atmospheres of the earth.
The intensity of the electromagnetic radiation from the Sun just outside the atmosphere of the Earth is 1.55 x 10-9 W/m2.
The intensity of electromagnetic waves from the sun just outside the atmosphere of the Earth can be calculated using the inverse-square law.
This law states that the intensity of the radiation decreases with the square of the distance from the source. Thus, the intensity of the radiation at the edge of the atmosphere will be lower than that at the surface of the Sun.
The intensity of the radiation, we need to know the distance from the Sun to the Earth. This distance is approximately 93 million miles (150 million kilometers).
The intensity of the radiation at the edge of the atmosphere by taking the inverse-square of this distance, which is approximately 1.55 x 10-9 W/m2.
This is the intensity of the electromagnetic radiation from the Sun just outside the atmosphere of the Earth.
The intensity of the electromagnetic radiation from the Sun just outside the atmosphere of the Earth is 1.55 x 10-9 W/m2.
This is due to the inverse-square law, which states that the intensity of radiation decreases with the square of the distance from the source.
to know more about electromagnetic refer here:
https://brainly.com/question/17057080#
#SPJ11
two pulse waves of equal and opposite amplitude move toward each other on a cord. after they interfere with each other, what happens to the waves?
The waves will cancel each other out and no waves will remain. If two waves of the same frequency, but different amplitudes, interfere with each other, the resulting wave will have an amplitude equal to the sum of the two wave amplitudes.
What are pulse waves?Pulse waves are pressure waves that are created as the heart pumps blood throughout the body. They are detected through pulse points, such as on the wrists, neck, or temples. Pulse waves can be measured using a device called a pulse oximeter, which uses a sensor to detect the pressure of the pulse wave.
Pulse waves can provide information about a person’s heart rate and oxygen saturation levels.
Learn more about pulse waves here:
https://brainly.com/question/26701631
#SPJ1
a series circuit is a current divider and a parallel circuit is a voltage divider circuit. select one: a. true b. false
The given statement " A series circuit is a current divider and a parallel circuit is a voltage divider circuit " is True
In a series circuit, the electric current is the same through each component, and the total current is equal to the sum of the currents through each component. Therefore, the current is divided among the components.
In a parallel circuit, the potential voltage across each component is the same, and the total voltage is equal to the sum of the voltages across each component. Therefore, the voltage is divided among the components.
Know more about electric current here:
https://brainly.com/question/2264542
#SPJ11
find the net work w done on the particle by the external forces during the particle's motion.express your answer in terms of f and s . gg done on the particle by the external forces during the particle's motion. to understand the meaning and possible applications of the work-energy theorem. in this problem, you will use your prior knowledge to derive one of the most important relationships in mechanics: the work-energy theorem. we will start with a special case: a particle of mass m moving in the x direction at constant acceleration a . during a certain interval of time, the particle accelerates from vi to vf , undergoing displacement is given by s
The net work (W) done on the particle by the external forces during its motion can be expressed in terms of the initial (Ki) and final (Kf) kinetic energies as: [tex]W = ((1/2) \times m \times vf^2) - ((1/2) \times m \times vi^2)[/tex]
To find the net work (W) done on the particle by the external forces during the particle's motion in terms of the initial (Ki) and final (Kf) kinetic energies, we will use the work-energy theorem. The work-energy theorem states that the net work done on an object is equal to the change in its kinetic energy.
Step 1: Calculate the initial kinetic energy (Ki) and final kinetic energy (Kf).
Ki = (1/2) * m * vi²
Kf = (1/2) * m * vf²
Step 2: Calculate the change in kinetic energy (ΔK) as the difference between Kf and Ki.
ΔK = Kf - Ki
Step 3: According to the work-energy theorem, the net work (W) done on the particle by the external forces during its motion is equal to the change in kinetic energy (ΔK).
W = ΔK
Step 4: Substitute the expressions for Ki and Kf from step 1 into the equation for W from step 3.
W = ((1/2) * m * vf²) - ((1/2) * m * vi²)
In conclusion, the net work (W) done on the particle by the external forces during its motion can be expressed in terms of the initial (Ki) and final (Kf) kinetic energies as: W = ((1/2) * m * vf²) - ((1/2) * m * vi²)
To know more about work refer here:
https://brainly.com/question/31050706#
#SPJ11
Complete Question:
Find the net work W done on the particle by the external forces during the motion of the particle in terms of the initial and final kinetic energies. Express your answer in terms of Ki and Kf. Work done on the particle by the external forces during the particle's motion. To understand the meaning and possible applications of the work-energy theorem. In this problem, you will use your prior knowledge to derive one of the most important relationships in mechanics: the work-energy theorem. We will start with a special case: a particle of mass m moving in the x direction at constant acceleration a . During a certain interval of time, the particle accelerates from vi to vf, undergoing displacement is given by s=xf −xi.
for an incandescent bulb, initial cost may be high but the energy costs will be low over its life time. (1 point) group of answer choices true false
True. An incandescent bulb may have a higher initial cost than other types of lightbulbs, but it uses less energy over its lifetime and thus reduces energy costs.
For an incandescent bulb, the given statement is true. In candescent bulbs are traditional bulbs, which use a filament to create light. These bulbs are less efficient, as they waste most of the electricity they use as heat rather than light. As a result, the bulbs are less cost-effective in the long run.
They use up more energy than modern alternatives such as CFLs (compact fluorescent lights) or LEDs (light-emitting diodes). Despite their low initial cost, incandescent bulbs are not recommended for long-term use. They consume more electricity and thus have a greater impact on the environment. Therefore, it is not true that the energy costs of an incandescent bulb will be low over its life time.
Read more about costs:
https://brainly.com/question/25811981
#SPJ11