Answer:The current in a lightbulb with a voltage of 35.0 V and a resistance of 175 ohm is 0.2 A.
Find the current in a lightbulb?
Given:
The voltage in a lightbulb is given by the equation V=IR
V is the voltage, I is current, and R is the resistance.
The voltage of the lightbulb is given as 35.0 V.
The resistance of the lightbulb is given as 175 Ohm.
As the equation is given,
V= IR
where I is current, R is resistance and V is the voltage.
Now, I = V/R
As the value of Voltage and resistance of the lightbulb is given, we will put in the above equation, we get;
I = 35.0/ 175 A
I = 0.2 A.
Hence, the current of the lightbulb is 0.2 A.
Therefore, Option C is the correct answer.
To learn more about Current, refer to:
Explanation:
A similar device includes a transformer so that an MP3 player can also be charged. The primary coil has 300 turns.
(a) How many turns are needed in the secondary winding if the voltage is stepped up from 6.2 V to 15.5 V?
(b) Given that the current in the primary winding is 10 mA, what power is transmitted to the secondary windings if the transformer is 77% efficient?
The secondary coil needs 120 turns.The power transmitted to the secondary winding is 0.155 W.
How does the voltage change between the primary and secondary coil in a transformer?A transformer works by using electromagnetic induction to transfer electrical energy between two circuits. The voltage changes between the primary and secondary coil based on the ratio of the number of turns in each coil. In a step-up transformer, the voltage is increased from the primary to the secondary coil, while in a step-down transformer, the voltage is decreased.
Transformers are commonly used in electronic devices to convert voltage levels, isolate circuits, and match impedances. They are often used in power supplies to step down the voltage from the wall outlet to a level that can be used by the device. They are also used in audio amplifiers to match the impedance of the output to the speaker, and in radio and television receivers to tune in to different frequencies.
To know more about voltage,visit:
https://brainly.com/question/29445057
#SPJ1
You leave Fort worth ,Texas,at 2:41 p.m. and arrive in Dallas at 3:23 p.m. , covering a distance of 58km. what is your average speed in metres per second ?
Answer:
Explanation:
The time taken to travel from Fort Worth to Dallas is:
t = 3:23 pm - 2:41 pm = 42 minutes = 0.7 hours
The distance covered is:
d = 58 km
The average speed is:
v = d/t = 58 km / 0.7 hours = 82.86 km/h
To convert km/h to m/s, we can use the conversion factor:
1 km/h = 0.2778 m/s
Therefore, the average speed in m/s is:
v = 82.86 km/h × 0.2778 m/s/km = 23.06 m/s (rounded to two decimal places)
So the average speed is 23.06 m/s.
Work Energy Theorem Question: You apply 50 N to a 10 kg object to cause it to move from rest to 2.5 m/s. What distance was the object moved?
Answer:
0.625 meters
Explanation:
We can use the work-energy that the work done on an object is equal to the change in its kinetic energy:
Work = ΔK = Kf - Ki
Where:
Work is the work done on the object
ΔK is the change in kinetic energy of the object
Kf is the final kinetic energy of the object
Ki is the initial kinetic energy of the object (which is zero since the object is at rest)
The work done on the object is equal to the force applied to the object multiplied by the distance over which the force is applied:
Work = F × d
Where:
F is the force applied to the object (50 N)
d is the distance over which the force is applied (unknown)
So we can write:
F × d = Kf - Ki
Substituting the given values:
50 N × d = 1/2 × 10 kg × (2.5 m/s)^2 - 0
Simplifying:
50 N × d = 31.25 J
Solving for d:
d = 31.25 J / 50 N = 0.625 m
Therefore, the object was moved a distance of 0.625 meters.
please rate
Mary walked north from her home to Sheila's home, which is 4.0 kilometers away. Then she turned right and walked another 3.0 kilometers to the supermarket, which is 5.0 kilometers from her own home. She walked the total distance in 1.5 hours. What were her average speed and average velocity?
A.
Her average speed was about 4.6 km/hr, and her average velocity was about 3.3 km/hr.
B.
Her average speed was about 3.3 km/hr, and her average velocity was about 4.6 km/hr.
C.
Her average speed was about 3.3 km/hr, and her average velocity was 0 km/hr.
D.
Her average speed was 0 km/hr, and her average velocity was about 4.6 km/hr.
Her average speed was about 4.6 km/hr, and her average velocity was about 3.3 km/hr.
The entire distance travelled divided by the total time taken is the definition of average speed. In this case, the total distance travelled was 7.0 km, and the total time taken was 1.5 hours. Hence, the average speed can be determined as follows:
Average Speed = [tex]\frac{7.0 km }{ 1.5 \ hours }= 4.6 km/hr[/tex]
The displacement divided by the whole time travelled is the average velocity. In this case, the displacement was 3.0 km (from Mary's home to Sheila's home), and the total time taken was 1.5 hours.The average velocity can therefore be determined as follows:
Average Velocity = [tex]\frac{3.0 km }{1.5 \ hours} = 3.3 km/hr[/tex]
Therefore,Her average velocity was roughly 3.3 km/hr, and her average speed was roughly 4.6 km/hr.
learn more about Average speed Refer:brainly.com/question/12322912
#SPJ1
A metal filament Lamp rated at 750w, 100v into be connected in series with a capacitor across a 230v, 60hz supply. Calculate the capacitance required
Answer : 0.00885 farads or 8.85 microfarads
Explanation: To calculate the capacitance required, we can use the following formula:
C = 1 / [2 * pi * f * ((V^2 - Vlamp^2)/P)]
where:
C = capacitance in farads (F)
pi = 3.14159...
f = frequency in hertz (Hz)
V = voltage in volts (V)
P = power in watts (W)
Vlamp = voltage of the lamp in volts (V)
Using the given values, we have:
C = 1 / [2 * pi * 60 * ((230^2 - 100^2)/750)]
C = 1 / [2 * 3.14159 * 60 * ((230^2 - 100^2)/750)]
C = 1 / [113.09724]
C = 0.00885 farads (F)
Therefore, the capacitance required is approximately 0.00885 farads or 8.85 microfarads.
HELPPPP LATE HOMEWORK DUE TODAY
If F₁ has a greater magnitude than F₂, the box will accelerate backward because the net force is in the backward direction (1st option)
How do i know which direction the box will move to?To obtain the direction in which the box will move, we shall determine the net force acting on the box. This is illustrated below:
Assumption:
Magnitude of force 1 (F₁) = 40 NMagnitude of force 2 (F₂) = 25 NNet force (F) =?Net force = Magnitude of force 1 (F₁) - Magnitude of force 2 (F₂)
Net force = F₁ - F₂
Net force = 40 - 25
Net force = 15 N backward
From the above illustration, we can see that the net force is 15 N backward.
Thus, we can conclude from the box will accelerate backward (1st option)
Learn more about net force:
https://brainly.com/question/12282988
#SPJ1
Describe the change to the graph of Y= X +3 when Y=2X -3 is graphed 
Answer: a stretch of 2
Explanation: because it 2 (x) - 3
460miles per hour with the wind nd 420 per hour gainst the wind
The speed of the wind is 20 miles per hour.
To solve this problem, we can use the formula:
Speed = Distance/Time
Let's assume that the speed of the wind is x miles per hour.
With the wind, the plane travels at a speed of 460 miles per hour. This means that its speed relative to the ground is the sum of its airspeed and the speed of the wind:
460 = Airspeed + x
Against the wind, the plane travels at a speed of 420 miles per hour. This means that its speed relative to the ground is the difference between its airspeed and the speed of the wind:
420 = Airspeed - x
We can solve this system of equations to find the airspeed of the plane:
460 = Airspeed + x
420 = Airspeed - x
Adding the two equations gives:
880 = 2Airspeed
Dividing both sides by 2 gives:
Airspeed = 440 miles per hour
Now that we know the airspeed of the plane, we can find the speed of the wind by substituting this value into one of the equations we obtained earlier:
460 = Airspeed + x
460 = 440 + x
x = 20
To learn more about speed visit;
https://brainly.com/question/28224010
#SPJ9
The units of voltage are
Oohms, amps, volts
Oamps, volts, ohms
Ovolts, ohms, amps
Ovolts, amps, ohms
of current are
and of resistance are
Answer:24 volts ÷ 4 amps = 6 ohms
Explanation:
We know that the Ohm's law has given the relationship between the current, voltage and the resistance of the wire. Mathematically, it can be written as :
Where
I is the current
R is the resistance
If current flowing is 4 amps and voltage is 24 volts. The formula to find the resistance will be :
R = 6 Ohms
Hence, the correct option is (d) " 24 volts ÷ 4 amps = 6 ohms ".
Why is it important to assess your fitness level?
Assessing your fitness level is important because it help in tracking your progress and determine if you are making improvements. Regular assessments can help you identify areas where you may need to make adjustments to your fitness routine to achieve your goals. By assessing fitness level, you can identify areas where you may be weaker or less flexible. This information can help you design a fitness routine that addresses these areas and reduces our risk of injury.
Regular physical activity and exercise can improve overall health and reduce the risk of chronic diseases such as heart disease, diabetes, and obesity. By understanding your fitness level, you can design an exercise routine that helps you achieve optimal health and wellness.
could any of you please help i really need it
Answer: B is insulating and A is conducting
Explanation:
I really hope that's right. If not, I am so sorry.
What is the electric potential energy of the group of charges in the figure? (Figure 1)
that the relative placements of the charges as well as their multiples affect a set of ions' potential energy. When the specific charge have the same sign or have equal signs, the energy is positive. Or else, it is negative.
How is potential energy calculated?The force acting just on two objects affects the potential energy formula. The formula for gravitational force is P.E. (= mgh, where g seems to be the acceleration caused by gravity (9.8 m/s2 at the earth's surface) while h represents the elevation in metres.
What is a system with two charges' potential energy?As a result, the system's potential energy equals the sum of a work that was done to set up the entire system of two counts. The potential energy that exists in the combination of two charges in such an external field can be stated as follows: q1V(r1) = q2V(r2) + (q1q2/4or12).
To know more about specific charge visit:
https://brainly.com/question/12288095
#SPJ1
Dish Network sent a satellite into orbit around 36000 km above the Earth's surface. What is the speed of the Satellite in miles per hour?
G=6.67 x 10^-11
M Earth = 5.98 x 10^24 kg
R Earth = 6.37 x 10^6 m
A. 306889 mi/hr
B. 6,864.38 mi/hr
C. 6.86491 mi/hr
D. 9.8mi/hr
Answer:
Explanation:
First, we need to use the formula for the speed of an object in circular orbit:
v = sqrt(GM/R)
where G is the gravitational constant, M is the mass of the Earth, R is the distance between the center of the Earth and the satellite.
Converting the units to meters and kilograms:
G = 6.67 × 10^-11 m^3/kg s^2
M = 5.98 × 10^24 kg
R = (36000 + 6.37 × 10^6) × 1000 = 4.23 × 10^7 m
Plugging in the values:
v = sqrt((6.67 × 10^-11) × (5.98 × 10^24) / (4.23 × 10^7))
v ≈ 3075.58 m/s
Finally, we can convert this to miles per hour:
v = 3075.58 m/s x (3600 s/hr) / (1609.34 m/mi) = 6873.18 mi/hr
Therefore, the answer is option A. 306889 mi/hr is incorrect.
A harp string has a length of 30.5 cm and vibrates with a node at each end and an antinode inthe center. If its frequency is 440 Hz, find (a) the wavelength and (b) the speed of the waves on the string.
Answer:
In this problem, the harp string is fixed at both ends, so it is a standing wave with nodes at both ends and an antinode in the center. The frequency of the wave is given as 440 Hz, and the length of the string is 30.5 cm.
(a) To find the wavelength of the wave, we can use the formula:
λ = 2L/n
where λ is the wavelength, L is the length of the string, and n is the number of nodes. In this case, n = 2 (since there are nodes at both ends) and L = 30.5 cm, so we have:
λ = 2(30.5 cm)/2 = 30.5 cm
Therefore, the wavelength of the wave is 30.5 cm.
(b) To find the speed of the wave on the string, we can use the formula:
v = fλ
where v is the speed of the wave, f is the frequency of the wave, and λ is the wavelength. In this case, f = 440 Hz and λ = 30.5 cm, so we have:
v = (440 Hz)(30.5 cm) = 13420 cm/s
Therefore, the speed of the wave on the string is 13420 cm/s
Explanation:
please Mark Me As Brainlist
PLS ANWSER QUICK
1. Compare the relative light-gathering power of a telescope with a 40-inch primary lens with an otherwise identical telescope with a smaller 20-inch lens. Then, analyze the limitations and importance of space telescope data across the electromagnetic spectrum. In your answer, describe one way such telescope data can help astronomers determine distances between celestial objects and how this relates to how astronomers use observational astronomy methods like the cosmic distance ladder.
A telescope with a 40-inch primary lens has four times the light-gathering power compared to a telescope with a 20-inch lens. Space telescope data is important for studying celestial objects across the electromagnetic spectrum and provides comprehensive information. Telescopic data helps determine distances between objects through techniques like redshift measurement and the cosmic distance ladder.
Explanation:The relative light-gathering power of a telescope is determined by the area of its primary lens or mirror. In this case, the telescope with the 40-inch primary lens has four times the light-gathering power compared to the telescope with the 20-inch lens. This is because the area of the 40-inch lens is four times larger than the area of the 20-inch lens.
Space telescope data is important across the electromagnetic spectrum because it allows astronomers to study celestial objects in different wavelengths, revealing information that is not accessible through visible light observations alone. By using data from telescopes that operate in various parts of the electromagnetic spectrum, astronomers can gather more comprehensive information about the universe.
One way telescope data helps determine distances between celestial objects is through the measurement of redshift. Redshift occurs when light from distant objects is stretched to longer wavelengths due to the expansion of the universe. By analyzing the amount of redshift in the light from a celestial object, astronomers can estimate its distance. This method is a part of the cosmic distance ladder—a set of techniques used to determine distances to different objects in the universe.
Learn more about Telescope Light-Gathering Power and Space Telescope Data here:https://brainly.com/question/31942374
#SPJ2
Given the equation = Ѧ and = 1.1 × 103, = 2.48 × 10−2, and = 6.000. What is w, in scientific notation and with the correct number of significant figures?
w is 1.07 × 10^4, expressed in scientific notation with the correct number of significant figures.
How do we calculate the value of w?The equation given is:
Ψ = w/(yz^2)
We Substitute the given values, we get:
Ψ = w/(y × z^2) = 1.1 × 10^3 × 2.48 × 10^-2 × 6.000 = 1.6464
solving for w and rearranging the equation as:
w = Ψ × y × z^2
We Substitute the given values, we get:
w = 1.6464 × 37 × (14)^2 = 10,722.7584
we round the value of w to three significant figures, since the values of y, z, and Ψ are given with three significant figures, in order to express the result in scientific notation with the correct number of significant figures,
Rounding 10,722.7584 to three significant figures gives 10,700. Therefore, the value of w is:
w = 1.07 × 10^4
Learn more about scientific notation at:
https://brainly.com/question/1767229
#SPJ1
Who discovered energy quanta and earned a Nobel Prize in Physics?
Answer: Max Planck
He won the Nobel Prize for Physics in 1918.
How could you use the game of baseball to explain the difference between
inertia and momentum?
Explanation:
Inertia refers to the tendency of an object to resist changes in its motion. In baseball terms, a baseball that is at rest on the ground has a high level of inertia because it is resistant to moving until an external force, such as a player's bat, acts on it.
Momentum, on the other hand, is the product of an object's mass and velocity and refers to the quantity of motion that an object possesses. In baseball terms, a baseball that is moving at a high velocity, such as when it is hit by a bat, has a high level of momentum.
To illustrate the difference between inertia and momentum in baseball, consider the scenario of a baseball that is hit by a bat. Before the bat hits the ball, the ball is at rest and has a high level of inertia. However, once the bat hits the ball, the ball gains momentum and begins to move. As the ball moves, it continues to possess momentum, but its inertia gradually decreases as it encounters external forces, such as air resistance and friction from the ground, which act to slow it down.
1. A 8.2 kg mass hanging from a spring scale is slowly lowered onto a vertical spring.
A) What does the spring scale read just before the mass touches the lower spring?
B) The scale reads 14 N when the lower spring has been compressed by 2.4 cm . What is the value of the spring constant for the lower spring?
C) At what compression length will the scale read zero?
The spring scale read just before the mass touches the lower spring is 80.36N, the spring constant for the lower spring is 2765N/m and at 2.9cm length the scale will read zero.
Given the mass of spring = 8.2kg
The force exerted for compressing of spring = 14N
The compression in spring = 2.4cm = 0.024m
(A.) Initially the spring scale reads only the weight of the mass = mg
W = 8.2 * 9.8 = 80.36N
(B) Let the value of spring constant = k
The net force exerted so that the scale reads(F') = 80.36N - 14 = 66.36N
We know that according to Hooke's law the force exerted on spring F = kx such that:
F' = kx then:
66.36 = k * 0.024
k = 66.36/0.024 = 2765N/m
(C) the compression where scale reads zero = x'
The scale reads zero when the restoring force equals to the weight of the mass then the scale reads zero such that:
x' = 80.36/2765 = 0.029m = 2.9cm
To learn more about spring constant click here https://brainly.com/question/14159361
#SPJ1
waves are generated in a rope of length 6m. What is the speed of the wave if its period is 25.m
The speed of the wave would be0.48 m/s.
Speed of a waveThe speed of a wave is given by the formula:
v = λ/T
where v is the wave speed, λ (lambda) is the wavelength, and T is the period.
To solve this problem, we need to know the wavelength of the wave. We can find the wavelength using the formula:
λ = 2L
where L is the length of the rope. Substituting L = 6 m, we get:
λ = 2 × 6 m = 12 m
Now we can use the formula for wave speed:
v = λ/T
Substituting λ = 12 m and T = 25 s, we get:
v = 12 m/25 s = 0.48 m/s
Therefore, the speed of the wave is 0.48 m/s.
More on the speed of a wave can be found here: https://brainly.com/question/10715783
#SPJ1
A block of mass m1=3.0kg rests on a frictionless horizontal surface. A second block of m2=2.0kg hangs from an ideal cord of negligible mass that runs over an ideal pulley and then is connected to the first block . the blocks are released from rest . determine the displacement of the velocityA block of mass m1=3.0kg rests on a frictionless horizontal surface. A second block of m2=2.0kg hangs from an ideal cord of negligible mass that runs over an ideal pulley and then is connected to the first block . the blocks are released from rest . Determine how far has block 1 moved during the 1.2-s interval?
A) 13.4 m
B) 2.1 m
C) 28.2m
D) 7.6m
The answer is:
D. 7.6m
What is the momentum of a 2.3 kg ball rolling at 6 m/s?
Show your work
Answer:
13.8 (kgm)/s
Explanation:
p(momentum) = m (mass) * v (velocity)
p= 2.3 * 6
p = 13.8
Student A has a mass of 95 kg and student B has a mass of 82 kg. If their centers of mass are
0.6 meters apart, what will be the gravitational force each student exerts on the other?
Round your answer to the nearest whole number.
Answer:
0 Newtons, to the nearest whole number
Explanation:
Using the formula attached to this answer,
F = (6.67 x 10-¹¹ • 95 • 82) / 0.6²
F = 5.19593 x 10-⁷ / 0.36
F = 1.4433 x 10-⁶ N
F = 0.000001443 N
To the nearest whole number
F = 0 N
Please mark brainliest.
Thanks
Explain how a balloon is able to keep its shape?
Answer:
It depends on how they are made.
Explanation:
Rubber balloons are not always spherical in shape. When filled with air, the inflation forms a balance between the balloon material, including its shape and thickness and its elasticity and the pressure of the air. That’s what determines its shape. Although a sphere is often the shape, it could be tubular, offset, and most other shapes.
What is the defining property of an mechanical wave?
A. It travels by compressing particles.
B. It travels up and down.
C. It does not need a medium to travel.
D. It needs a medium to travel.
Answer: D. It needs a medium to travel.
Explanation:
One way to categorize waves is on the basis of the direction of movement of the individual particles of the medium relative to the direction that the waves travel. Categorizing waves on this basis leads to three notable categories: transverse waves, longitudinal waves, and surface waves.
A 80kg stone falls from the top of the 360 meter cliff. Neglecting friction, how fast will the stone be moving just before it hits the ground?
The stone will be moving at a speed of approximately 84.4 meters per second just before it hits the ground, neglecting friction.
To find how fast will the stone be moving just before it hits the ground?This problem can be solved using the laws of kinematics and conservation of energy. The potential energy of the stone at the top of the cliff is converted to kinetic energy as it falls. We can equate the potential energy at the top of the cliff to the kinetic energy just before hitting the ground.
Potential energy = mgh,
Where
m is the mass of the stone g is the acceleration due to gravity (9.8 m/s^2) h is the height of the cliff (360 meters)Kinetic energy = (1/2)mv^2,
Where
v is the velocity of the stone just before hitting the ground.Equating these two expressions and solving for v, we get:
mgh = (1/2)mv^2
v^2 = 2gh
v = sqrt(2gh)
Plugging in the given values, we get:
v = sqrt(2 x 9.8 m/s^2 x 360 m) = 84.4 m/s
Therefore, the stone will be moving at a speed of approximately 84.4 meters per second just before it hits the ground, neglecting friction.
Learn more about laws of kinematics here : brainly.com/question/28863739
#SPJ1
How smart is Albert Einstein?
Albert Einstein was one of the greatest physicists of all time and is widely considered a genius. He made groundbreaking contributions to our understanding of the universe, including the theory of relativity and the famous equation E=mc².
Einstein's intelligence can be seen in his early academic achievements. He excelled in math and physics, and by the age of 16, he was already doing advanced physics research on his own. He went on to earn a PhD and made significant contributions to physics, publishing numerous papers and developing revolutionary theories.
Moreover, his ability to think creatively and critically is evidenced by his approach to problem-solving. He was known for his thought experiments, which allowed him to explore complex concepts and theories without the need for expensive equipment or experiments. He was also skilled at developing intuitive and elegant solutions to complex problems.
Therefore Einstein's intelligence is widely recognized and respected by scientists, scholars, and the general public alike. He is considered one of the most brilliant minds in history and has made a lasting impact on our understanding of the universe.
To learn more about the theory of relativity click:
https://brainly.com/question/364776
#SPJ1
Which material would you choose to make the handrails of the playhouse? Use the data to explain your reasoning.
Answer:
Explanation:
To choose a material for the handrails of the playhouse, we need to consider its strength and durability. One option could be stainless steel, which has a high tensile strength and is resistant to corrosion and weathering. Another option could be treated wood, which is also strong and can be treated to resist moisture and insects. Ultimately, the choice would depend on factors such as cost, aesthetics, and availability of materials.
From these measurements, compute the possible error in the volume.
Plugging in the values of the length and diameter, along with the error value, the error in the volume of the cylinder is approximately 1.27 cm³.
What is error in measurement?Error in measurement refers to the deviation or difference between the true or expected value and the measured value of a physical quantity. The presence of errors in measurement can affect the accuracy and precision of the results obtained.
To compute the possible error in the volume of the cylinder, we first need to calculate the volume of the cylinder using the measured values of its length and diameter:
V = πr²h
r = d/2 = 2.1/2 = 1.05 cm
V = π(1.05)²(8.9) = 31.79 cm³
Now, we need to determine the possible error in the volume, which can be calculated using the formula:
ΔV = V × √[(Δd/d)² + (Δh/h)²]
where Δd and Δh are the uncertainties in the diameter and length measurements, respectively. Substituting the given values, we get:
ΔV = 31.79 × √[(0.1/2.1)² + (0.1/8.9)²] = 1.27 cm³ (approx.)
Therefore, the possible error in the volume of the cylinder is approximately 1.27 cm³.
To find out more about errors, visit:
https://brainly.com/question/28109798
#SPJ1
The cross-sectional area of vessel A is 50 cm² and it contains water to a height 30 cm. The vessel B has an area of cross-section of 25 cm². The two vessels are connected with a thin tube as shown in the figure, When the tap is slowly opened, and the water attained an equilibrium in both vessels. The reduction in the potential energy of the water is (Density of water is 1000 kgm-³)
1) 7.5 J
2) 22.5 J
3) 0.75 J
4) 8.5 J
5) 75 J
Please show the working along with a brief explanation.
The reduction in the potential energy of the water is approximately 7.5 J.
option 1
What is the reduction in potential energy?We can use the principle of conservation of energy to determine the reduction in potential energy of the water.
Initially, the water in vessel A has a certain amount of potential energy due to its height above the bottom of the vessel. When the water flows through the tube and reaches vessel B, its height above the bottom of vessel B is lower than that of vessel A, which means that its potential energy has decreased.
The potential energy of the water in vessel A is given by:
PE_A = mgh_A
The mass of the water in vessel A is given by:
m = density x volume
volume = A x h_A
Substituting for m and simplifying, we get:
PE_A = density x A x h_A x g
Similarly, the potential energy of the water in vessel B is:
PE_B = density x A_B x h_B x g
At equilibrium, the height of the water in the two vessels will be the same, so we can set h_A = h_B = h.
Also, since the water is in equilibrium, the pressure at the bottom of both vessels must be the same. This means that the pressure difference between the top and bottom of the water column in vessel A (due to the weight of the water) must be balanced by the pressure difference between the top and bottom of the water column in vessel B.
The pressure difference in vessel A is:
P_A = density x g x h_A
and the pressure difference in vessel B is:
P_B = density x g x h_B
Since the pressure difference must be balanced, we have:
P_A - P_B = density x g x h_A - density x g x h_B = 0
which simplifies to:
h_A = h_B x A_B / A
Substituting for h_A and h_B in the expressions for PE_A and PE_B, we get:
PE_A = density x A x h x g
PE_B = density x A_B x h x g x A / A_B
The reduction in potential energy of the water is:
ΔPE = PE_A - PE_B = density x g x h x (A - A_B x A / A_B)
which simplifies to:
ΔPE = density x g x h x (A - A_B)
Substituting the given values, we get:
ΔPE = 1000 kg/m³ x 9.8 m/s² x 0.3 m x (50 cm² - 25 cm²)
Converting the area units to m², we get:
ΔPE = 1000 kg/m³ x 9.8 m/s² x 0.3 m x (0.005 m² - 0.0025 m²)
Simplifying, we get:
ΔPE = 7.4 J
Learn more about potential energy here: https://brainly.com/question/1242059
#SPJ1