The species that should have the highest molar entropy at 298 K is CH4(g). The correct option is CH4.
Entropy is a measure of the amount of disorder or randomness in a system. In other words, it is a measure of the number of ways a system can be arranged while maintaining its energy state. It is represented by the symbol S.
The entropy of a pure crystalline substance is zero at absolute zero temperature because it has a well-defined, ordered, and rigid structure.
As temperature increases, the entropy of the substance increases because the molecules of the substance move more randomly and are distributed over a larger volume.
Entropy is highest for gases, followed by liquids and then solids. Molar entropy is a measure of the entropy of a substance per mole of the substance.
Molar entropy (S) is given by the equation:
S = ΔS/n
Where ΔS is the change in entropy and n is the number of moles of substance. At standard temperature and pressure, the molar entropy of a substance is represented by Sº.
The entropy of the given species at 298 K is as follows:
H2O(l)Sº = 69.9 J/mol KNaCl(aq)Sº = 72.1 J/mol KCH4(g)Sº = 186.3 J/mol KNaCl(s)Sº = 72.1 J/mol KThus, the species that should have the highest molar entropy at 298 K is CH4(g).
to know more about entropy refer here:
https://brainly.com/question/20166134#
#SPJ11
with an atomic number of 11, which of these elements gets its symbol from the latin word natrium?
The element with an atomic number of 11 that gets its symbol from the Latin word "natrium" is Sodium. Its symbol is "Na".
The symbol for sodium is Na, which is derived from the Latin word natrium. Sodium is a soft, silvery-white, highly reactive metal that is a member of the alkali metal group. It is an important element for many biological processes and is commonly found in salt (sodium chloride).
The other elements listed in the question are chlorine, iron, and nitrogen. Chlorine has an atomic number of 17, iron has an atomic number of 26, and nitrogen has an atomic number of 7. None of these elements gets their symbol from the Latin word natrium.
For more question on atomic number click on
https://brainly.com/question/11353462
#SPJ11
Probable question would be
with an atomic number of 11, which of these elements gets its symbol from the latin word natrium?
Sodium
Chlorine
Iron
Nitrogen
A biochemist wanted to adjust the of of a buffer solution composed of ( ) and , by adding moles of. (assume the volume of the solution is not affected by this addition. ) determine the of the resulting solution:
The pH value of the resulting solution assume the volume of the solution is not affected by this addition is 3.283.
The pH scale determines how acidic or basic water is. The range is 0 to 14, with 7 representing neutrality. Acidity is indicated by pH values below 7, whereas baseness is shown by pH values above 7. In reality, pH is a measurement of the proportion of free hydrogen and hydroxyl ions in water.
In this Question, HF is a Weak Acid and RbF is a weak Base - HNO3 is a strong acid.
HF reaction in aqueous medium
HF + H2O --------- H3O+ + F -
RbF + H2O ---- Rb+ + F -
pH (Original) = pKa + log ( [salt ] / [Acid] )
We donot need to calculate pH original -which is for the original solution before adding the strong acid.
HF is a weak acid - so in a buffer solution its dissociation is negligible - so it does not affect the H+ ion concentration much.
When a 0.012 mol of HNO3 is added to the buffer solution , it dissociates in H+ and NO-3 .
H+ ions dissociated from the Acid react with F - and produce HF . As a result the acid concentration will increase to the extent of 0.012 mol and the salt concentration reduces by the same extent - 0.012 mol.
So the formula for New pH changes to
pH (New) = pKa + log ( [salt ] - 0.012 mol / [Acid] + 0.012 mol)
Here , 0.012 mol are added to 281 mL solution,
Concentration of HNO3, M = number of moles / Vol in litres
= 0.012 mol / 281 mL
= 0.012 mol / 281 / 1000
= [0.012 mol x 1000] / 281 L = 0.043 M
As pKa = -log(Ka) ,
Given [salt ] = 0.480 M , [Acid] = 0.318 M
= - log(Ka) + log [ (0.480 M - 0.043 M) / (0.318 M + 0.043 M) ]
= - log (6.31 x 10-4 ) + log ( 0.437 / 0.361)
pH (New) = 3.20 + 0.083 = 3.283.
Learn more about pH value:
https://brainly.com/question/10603602
#SPJ4
Complete question:
A biochemist wanted to adjust the pH of 281 mL of a buffer solution composed of 0.318 M HF and 0.480 M RbF (K, = 6.31e - 04) by adding 0.012 moles of HNO3. Determine the pH of the resulting solution: pH number (rtol=0.02, atol=1e-08)
what is the percentage of the renantiomer in a sample of limonene that has a specific rotation ot -38, given that the specific rotatic of (s)-limonene is - 116?
Answer: The percentage of the (R)-limonene in the sample is 67.24%.
The percentage of the (R)-limonene in a sample of limonene with a specific rotation of -38 can be calculated using the following equation:
Percentage (R)-limonene = (Specific rotation of sample - Specific rotation of (S)-limonene) ÷ (Specific rotation of (S)-limonene) x 100%
In this case, the equation is:
Percentage (R)-limonene = (-38 - (-116)) ÷ (-116) x 100% = 67.24%
Therefore, the percentage of the (R)-limonene in the sample is 67.24%.
Learn more about enantiomer here:
https://brainly.com/question/30845514#
#SPJ11
Does the phrase “Survival of the fittest” refer to an individual (single organism) or a species (group of same organisms)? Why?
The phrase "survival of the fittest," popularised in Charles Darwin's fifth edition of On the Origin of Species (published in 1869), argued that animals most adapted to their environment have the best chances of surviving.
What does "survival of the fittest" mean in terms of species?The environment and its conditions are continually changing, and the fittest individuals must generate even more fit offspring in order to ensure their survival. Here is when evolution comes into play.
Are organisms who are physically fitter more likely to survive and pass on their genes?An evolutionary mechanism is natural selection. Environment-adapted organisms have a higher chance of surviving and dispersing the genes that contributed to their success.
To know more about Charles Darwin's visit:-
brainly.com/question/13428382
#SPJ9
prior knowledge questions (do these before using the gizmo.) what important gas do we take in when we breathe?
Answer: The important gas that we inhale when we breathe is oxygen (O2).
It is necessary for the process of respiration. Respiration is a vital process that takes place in all living cells, including human cells. In this process, glucose (sugar) and oxygen are converted into energy (ATP), carbon dioxide (CO2), and water (H2O).
During the process of inhalation, the air enters the body through the mouth and nose. Afterward, it moves down the trachea and then into the lungs. Once inside the lungs, oxygen molecules pass through the thin walls of the capillaries and into the bloodstream, where it is transported to the rest of the body. Oxygen is essential for the proper functioning of the body.
It is used by the cells to produce energy, which is used to power various biological processes. Without oxygen, our cells would not be able to function, and we would die.
Learn more about oxygen here:
https://brainly.com/question/13905823#
#SPJ11
in the experiment where o2 consumption is measured with a respirometer how is a constant volume achieved?
by use identical respirometers. An intermediary in this process is pyruvate.
What kind of process uses pyruvate as an intermediary?Pyruvate is a crucial intermediary in several metabolic processes, including gluconeogenesis, fermentation, cellular respiration, fatty acid production, etc. Pyruvate is created near the conclusion of the glycolysis process. Through Kreb's cycle, pyruvate gives energy to living cells.
Is pyruvate a metabolic intermediary in all processes?Pyruvate is a crucial intermediate that can be employed in a number of anabolic and catabolic pathways, including as oxidative metabolism, glucose re-synthesis (gluconeogenesis), cholesterol synthesis (de novo lipogenesis), and maintenance of the tricarboxylic acid (TCA) cycle flow.
To know more about respirometers visit:-
https://brainly.com/question/15609292
#SPJ1
100cm3 of a gas at 27degree Celsius exert a pressure of its volume is increased to 200cm3 at 127 degrees Celsius
Answer: 100cm3 of gas at 27°c exert a pressure of 750mmHg. Calculate its pressure if it's volume is increased to 250cm3 at 127°c? In Chemistry
Explanation:
i. if you conducted this coupling step under acidic conditions, how would you expect the reaction rate to be affected?
If you conducted this coupling step under acidic conditions, you expect the reaction rate to be affected because at low pH values, the carboxylic acid is transformed into a more electrophilic species, which is easily attacked by the nucleophile, and the yield of the amide bond would be high.
In organic synthesis, coupling reactions are common, and they include the combination of a nucleophile with an electrophile to form a covalent bond. The coupling reaction between a carboxylic acid and an amine is a straightforward way to synthesize an amide in the presence of an activating agent (a molecule that can increase the electrophilicity of the carboxylic acid).
It is worth noting that there are various methods for synthesizing amides, including chemical and enzymatic methods. Coupling reactions are the most frequent chemical methods used for the synthesis of amides.
Learn more about nucleophile at:
https://brainly.com/question/6357352
#SPJ11
a mixture of three gases has a total pressure of 1,380 mmhg at 298 k. the mixture is analyzed and is found to contain 1.27 mol co2, 3.04 mol co, and 1.50 mol ar. what is the partial pressure of ar? multiple choice 0.258 atm 301 mmhg 356 mmhg 5,345 mmhg 8,020 mmhg
The partial pressure of Ar is 0.219 * 1,380 mmHg = 301 mmHg.
The partial pressure of a gas in a mixture is equal to the mole fraction of that gas times the total pressure of the mixture.
The mole fraction of Ar in this mixture is 1.50/6.81 = 0.219. Thus, the partial pressure of Ar is 0.219 * 1,380 mmHg = 301 mmHg.
The ideal gas law states that the pressure of a gas is directly proportional to its number of moles and inversely proportional to its volume.
This law is expressed in the equation PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature.
In a mixture of gases, each gas behaves independently according to the ideal gas law. Thus, the total pressure of the mixture is the sum of the partial pressures of each gas.
The partial pressure of a gas is equal to its mole fraction times the total pressure. The mole fraction of a gas is the number of moles of that gas divided by the total number of moles of all gases in the mixture.
In the example provided, the total pressure of the mixture is 1,380 mmHg, the number of moles of CO2 is 1.27, the number of moles of CO is 3.04, and the number of moles of Ar is 1.50.
The total number of moles of all gases in the mixture is 1.27 + 3.04 + 1.50 = 6.81. The mole fraction of Ar is 1.50/6.81 = 0.219. Thus, the partial pressure of Ar is 0.219 * 1,380 mmHg = 301 mmHg.
To know more about partial pressure refer here:
https://brainly.com/question/13199169#
#SPJ11
what is the ph for a titration of 25.0 ml of 25.0 ml of 0.365 m acetic acid 0.365 m acetic acid when 10.3 ml of 0.432 m when 10.3 ml of 0.432 m naoh have been added?
The pH for a titration of 25.0 mL of 0.365 M acetic acid when 10.3 mL of 0.432 M NaOH have been added is approximately 4.69.
The pH for a titration of 25.0 mL of 0.365 M acetic acid when 10.3 mL of 0.432 M NaOH have been added can be calculated using the following steps:
1. Calculate the moles of acetic acid (CH₃COOH) and sodium hydroxide (NaOH) before the reaction:
- Moles of CH₃COOH = volume × concentration
= 25.0 mL × 0.365 mol/L
= 9.125 mmol
- Moles of NaOH = volume × concentration
= 10.3 mL × 0.432 mol/L = 4.4456 mmol
2. Determine the moles of acetic acid and sodium hydroxide remaining after the reaction: Since acetic acid and sodium hydroxide react in a 1:1 ratio, the limiting reactant will be NaOH.
- Moles of CH₃COOH remaining = 9.125 mmol - 4.4456 mmol = 4.6794 mmol - Moles of NaOH remaining = 0 mmol (all NaOH is consumed in the reaction)
3. Calculate the concentration of acetic acid and acetate ion (CH₃COO-) after the reaction:
- [CH₃COOH] = moles of CH₃COOH remaining / total volume
= 4.6794 mmol / (25.0 mL + 10.3 mL)
= 0.12998 mol/L
- [CH₃COO-] = moles of NaOH consumed / total volume
= 4.4456 mmol / (25.0 mL + 10.3 mL)
= 0.12346 mol/L
4. Calculate the pH using the Henderson-Hasselbalch equation:
pH = pKa + log([CH₃COO-] / [CH₃COOH]) pKa of acetic acid is 4.76, so:
pH = 4.76 + log(0.12346 / 0.12998) ≈ 4.69
Therefore, the pH for a titration of 25.0 mL of 0.365 M acetic acid when 10.3 mL of 0.432 M NaOH have been added is approximately 4.69.
Learn more about titration here:
https://brainly.com/question/2728613#
#SPJ11
Order the anionic compounds from the most basic to least basic? 3) 1) 2) Magnify Select One Strongest base Second strongest Match With B 3) Weakest base C 2)
The compounds containing anions from the most basic to least basic are:1) B (Strongest base)2) C3) A (Weakest base)The order of basicity of anionic compounds can be determined using the periodic table. The correct answer is B>C>A.
Anions are larger than their corresponding atoms due to the addition of one or more electrons. As a result, anions have lower effective nuclear charges and therefore are more basic than their parent atoms. The larger the anion, the more basic it is. The order of basicity of anionic compounds is as follows:
B > C > A
Where, B is the most basic anionic compound, C is the second most basic anionic compound, A is the least basic anionic compound
Therefore, the order of the anionic compounds from the most basic to least basic is B > C > A. To order the anionic compounds from the most basic to least basic, follow these steps: Identify the anions present in each compound., Determine the conjugate acid of each anion, Compare the strength of the conjugate acids, Order the anionic compounds based on the strength of their conjugate acids (the weaker the conjugate acid, the stronger the base).
To know more about anions, refer here:
https://brainly.com/question/30581995#
#SPJ11
a saturated hydrocarbon has the maximum amount of hydrogens attached to the carbon skeleton. group of answer choices true false
True, a saturated hydrocarbon has the maximum amount of hydrogens attached to the carbon skeleton.
What is a hydrocarbon?Hydrocarbons are organic molecules that are made up of only carbon and hydrogen atoms. They may be composed of chains of various lengths, rings of various sizes, or a combination of both. The simplest hydrocarbons, such as methane (CH4), ethane (C2H6), and propane (C3H8), are gaseous at room temperature, whereas larger hydrocarbons are liquids, such as hexane (C6H14), or solids, such as hexadecane (C16H34).
Unsaturated hydrocarbons have carbon-carbon double or triple bonds in their structures, indicating that they are not completely saturated with hydrogen atoms. These hydrocarbons are commonly referred to as alkenes or alkynes, respectively. Alkenes have one double bond, whereas alkynes have one triple bond.
Read more about hydrocarbon :
https://brainly.com/question/22047391
#SPJ11
write the equilibrium equation established in a saturated potassium chloride, kcl, solution. equilibrium reaction:
The equilibrium equation for the dissolution of potassium chloride (KCl) in water can be represented as:
KCl(s) ⇌ K+(aq) + Cl-(aq)
What is Equilibrium?
In chemistry, equilibrium refers to the state of a chemical reaction where the concentrations of reactants and products no longer change with time. At this stage, the forward and reverse reactions occur at the same rate, resulting in no net change in the concentrations of reactants and products. It is denoted by a double arrow (⇌) between the reactants and products in a chemical equation. The equilibrium point is reached when the rate of the forward reaction equals the rate of the reverse reaction. The equilibrium constant, Keq, is a quantitative measure of the equilibrium concentration of reactants and products.
In this equation, KCl is the solid salt, and the arrow indicates the reversible reaction between the solid and its constituent ions in the aqueous solution. The dissociation of KCl in water results in the formation of potassium ions (K+) and chloride ions (Cl-) in the solution. When the rate of the forward reaction is equal to the rate of the reverse reaction, the solution is said to be in a state of dynamic equilibrium. In a saturated solution of KCl, the concentration of the dissolved ions is at its maximum value at equilibrium, and the undissolved solid salt is in equilibrium with its dissolved ions.
Learn more about Equilibrium from given link
https://brainly.com/question/517289
#SPJ1
what is the ph of an aqueous solution that is made by mixing 200 ml of 0.20m nah2po4 and 200 ml of 0.60m na2hpo4 at 25oc?
Answer: The pH of the solution is 9.22.
Explanation:
The given solution is a mixture of 200 mL of 0.20 M NaH2PO4 and 200 mL of 0.60 M Na2HPO4. NaH2PO4 is a weak acid and Na2HPO4 is a weak base. When they are mixed, they undergo a buffer solution.
The Henderson-Hasselbalch equation for a buffer is:
pH = pKa + log ([A-]/[HA])
Where,
pKa = -log Ka (dissociation constant of the acid)
[HA] = concentration of the acid (NaH2PO4)
[A-] = concentration of the conjugate base (HPO42-)
The pKa value for NaH2PO4 is 7.21 (at 25°C). The concentrations of the acid and the conjugate base can be calculated as follows:
For NaH2PO4:
moles of NaH2PO4 = 0.20 M x 0.2 L = 0.04 mol
concentration of NaH2PO4 = 0.04 mol / 0.4 L = 0.10 M
For Na2HPO4:
moles of Na2HPO4 = 0.60 M x 0.2 L = 0.12 mol
concentration of Na2HPO4 = 0.12 mol / 0.4 L = 0.30 M
Using the Henderson-Hasselbalch equation and substituting the values:
pH = 7.21 + log ([HPO42-]/[H2PO4-])
pH = 7.21 + log (0.30/0.10)
pH = 9.22
Therefore, the pH of the solution is 9.22.
How much KNO3 will dissolve in 200 grams H2O at 70 C
The red line shows that at 70 °C, 200 g of water will be saturated with about 140 g or potassium nitrate.
How does solubility in 100 grammes of water become calculated?This mass of a compound would be divided by mass of the solvent, and then divided by 100 g to determine its solubility. This calculation will give the solubility of the substance in g/100g.
How does the temperature affect KNO3's solubility in water?The curves demonstrate that when temperature rises, solubility of any and all three solutes increases. The most noticeable increase in solubility is for potassium nitrate, which goes from about 30 g per 100 g of water from over 200 grams per 100 grams of water.
To know more about potassium visit:
https://brainly.com/question/13321031
#SPJ1
Which water is distributed on Earth from the greatest to the least
The water distributed on Earth from the greatest to the least is saltwater, freshwater, and frozen water.
Saltwater occupies 97.5% of Earth's total water. Freshwater occupies only 2.5% of Earth's total water. This freshwater is found in different forms, such as rivers, lakes, underground, and glaciers. Only 0.3% of freshwater is found in rivers and lakes, while 30% is stored underground. The rest of freshwater is stored in glaciers and polar ice caps.
The frozen water found on Earth is 1.7% of the total water. It is found in glaciers, ice caps, and snow cover around the poles. The water cycle is a natural process that allows water to move from one place to another on Earth. It is also called the hydrologic cycle. It involves the movement of water between the earth, air, and ocean.
Water evaporates from the surface of the earth, which forms clouds. The clouds then precipitate as rain, snow, or hail. This precipitation may fall on the land and join rivers and lakes, or it may seep into the ground and form underground water. The underground water may then resurface as springs or streams, which then join rivers and lakes.
The water cycle helps to purify water and replenish freshwater resources on earth. It also helps to regulate the Earth's temperature by absorbing heat during the day and releasing it at night.
For more such questions on water, click on:
https://brainly.com/question/30173238
#SPJ11
it is fine to enter an area where there is a chemical spill as long as you are very careful. true or false?
The statement "it is fine to enter an area where there is a chemical spill as long as you are very careful" is False. because A chemical spill refers to the uncontrolled release of one or more hazardous substances.
A chemical spill refers to the uncontrolled release of one or more hazardous substances, which can include liquids, gases, or solids, which might pose a significant threat to the environment and human health. The person responsible for a chemical spill is responsible for managing, containing, and cleaning up the hazardous material to prevent environmental or public health damage.
Following a chemical spill, there is a protocol to be followed to guarantee that no harmful substances have been released into the environment that may cause harm to the public. The presence of toxic chemicals in a confined area poses a significant threat to human health, making it hazardous to enter that location. Even if the spill is small, entering an area where a chemical spill has occurred is hazardous. The contamination may disperse through the air, and you may inhale it or the substance may adhere to your clothing and skin, putting you at risk. You should not go near a chemical spill if you are not wearing appropriate protective gear. This is because it is not advisable to enter an area where there is a chemical spill.
For more such questions on chemical spill , Visit:
https://brainly.com/question/30256645
#SPJ11
How many chlorine atoms are there in 4 molecules of HCl?
Answer: Hydrogen chloride is a diatomic molecule, consisting of a hydrogen atom H and a chlorine atom Cl connected by a polar covalent bond.
the volume of a container expands when it is heated from 159k to 456k. what was the original volume if the final volume is 15.5 l
The original volume of the container is 5.40 L.
The given final volume of a container when heated is 15.5 L. The container expands when heated from 159 K to 456 K.
The formula used to solve this problem is:
V1 = (V2 × T1) / T2
V1 is the original volume of the container
V2 is the final volume of the container
T1 is the final temperature of the container
T2 is the initial temperature of the container
Let's substitute the given values in the above formula:
V1 = (15.5 × 159) / 456V1 = 5.40 L
Therefore, the original volume of the container is 5.40 L.
To know more about original volume click here:
https://brainly.com/question/12014506
#SPJ11
What is one way that the layers of the atmosphere help to maintain life on Earth?
One way that the layers of the atmosphere help to maintain life on Earth is by absorbing and scattering harmful solar radiation, such as ultraviolet (UV) radiation.
The ozone layer, which is located in the stratosphere layer of the atmosphere, absorbs most of the Sun's harmful UV radiation, preventing it from reaching the Earth's surface where it can cause DNA damage and skin cancer. Additionally, the atmosphere helps regulate the Earth's temperature by trapping heat from the Sun through the greenhouse effect, which is essential for maintaining a stable and habitable climate. The atmosphere also contains oxygen, which is necessary for the survival of many living organisms.
To know more about scattering click here:
brainly.com/question/3292565
#SPJ4
the density of normal water (tghe hydrogens do not have neurons) at 20c is 0.9982 g/ml. calculate the density you would expect for heavy water by assuming the deuterium is the same size as normal hydrogen when it is poart of the water
The density of heavy water at 20°C is 1.107 g/mL.
At 20°C, the density of normal water is 0.9982 g/ml.
The density of heavy water, which is composed of two atoms of deuterium instead of hydrogen, we must consider the difference in size between hydrogen and deuterium atoms.
Although the atomic masses of hydrogen and deuterium are slightly different, the difference in size is more significant, with deuterium atoms being about twice the size of hydrogen atoms.
Thus, when deuterium atoms are part of the water, the overall density of the water is greater.
This can be quantified using the following equation:
Density (heavy water) = [2*mass of hydrogen + mass of deuterium] / [2*volume of hydrogen + volume of deuterium]
The density of heavy water at 20°C is 1.107 g/ml, which is about 11% higher than that of normal water.
This increase in density is due to the larger size of deuterium atoms when compared to hydrogen atoms.
In conclusion, the density of heavy water at 20°C can be calculated by accounting for the difference in size between hydrogen and deuterium atoms.
This yields a value of 1.107 g/ml, which is 11% higher than that of normal water.
to know more about density refer here:
https://brainly.com/question/29775886#
#SPJ11
a chemist determined by measurements that moles of magnesium participated in a chemical reaction. calculate the mass of magnesium that participated in the chemical reaction.
Answer : The molar mass of magnesium is 24.305 g/mol
To calculate the mass of magnesium that participated in the chemical reaction, you need to know the number of moles of magnesium and the molar mass of magnesium. The molar mass of magnesium is 24.305 g/mol. Multiply the number of moles of magnesium by the molar mass of magnesium to calculate the mass of magnesium that participated in the chemical reaction.
For example, if you were given that the number of moles of magnesium is 0.25 moles, then you can calculate the mass of magnesium by multiplying 0.25 moles by 24.305 g/mol. This gives a result of 6.076 g of magnesium that participated in the chemical reaction.
To sum up, calculating the mass of magnesium that participated in the chemical reaction requires knowing the number of moles of magnesium and the molar mass of magnesium. The molar mass of magnesium is 24.305 g/mol, and you can calculate the mass of magnesium that participated in the chemical reaction by multiplying the number of moles of magnesium by the molar mass of magnesium.
Know more about magnesium here:
https://brainly.com/question/1533548
#SPJ11
How many moles are in 3.5 moles of FeF3
We just use molar mass for FeF3 (129.9 g/mol) to calculate the number moles in 3.5grammes of FeF3. Hence, just 3.5 x 129.9 = 4546.5 moles of FeF3 need to be multiplied.
Describe the Mass.An object's mass is determined by how much matter it has. Something that has more substance will weigh heavier overall. For instance, because an elephant contains more stuff than a mouse does, it has a heavier mass.
55.8+3⋅19=116 g/mole24 g116 g/mol=0.207 moles of FeF3
0.207 moles×6.022×23molecules/mole=1.2×1023molecules
How is mass measured?A thing's mass is how much matter it contains. Using a balance, scientists frequently determine mass. A beam balance or perhaps an electronic balance can be used to measure the mass of solids directly. Measure a liquid's volume, then use the density table to determine the liquid's mass.
To know more about mass visit:
https://brainly.com/question/15959704
#SPJ1
the empirical formula of a chemical substance is ch2. the molar mass of a molecule of the substance is 56.108 g/mol. what is the molecular formula of the chemical substance? (4 points) c3h4 c4h8 c2h4 c6h6
The molecular formula of the chemical substance is C4H8.
The empirical formula of a chemical substance, CH2, and its molar mass of 56.108 g/mol can be used to calculate the molecular formula of the substance.
In order to do this, we need to divide the molar mass by the empirical formula mass. The empirical formula mass for CH2 is 12.011 g/mol, so the calculation is: 56.108 g/mol / 12.011 g/mol = 4.67.
4.67, is the ratio of the molecular mass to the empirical formula mass.
This means that the molecular formula of the chemical substance is C4H8, which has a molecular mass of 4 x 12.011 g/mol = 48.044 g/mol, and is the closest molecular mass to the given molar mass of 56.108 g/mol.
Therefore, the molecular formula of the chemical substance is C4H8.
to know more about molecular formula refer here:
https://brainly.com/question/14425592#
#SPJ11
What is the nature of the bond indicated?
A. Nonpolar Covalent
B. Polar Covalent
C. Ionic
D. Metallic
The nature of the bond indicated in the diagram above would be the nonpolar covalent bond. That is option A.
What is a Nonpolar Covalent bond?A Nonpolar Covalent bond is defined as the type of chemical bond that is formed when electrons are shared equally between two atoms.
While polar covalent bond is defined as the type of chemical bond that is formed when electrons are shared unequally between two atoms.
For example, molecular oxygen (O2) is nonpolar because the electrons will be equally distributed between the two oxygen atoms.
Therefore the type of bond that is indicated in the diagram above is a nonpolar covalent bond.
Learn more about covalent bond here:
https://brainly.com/question/29630777
#SPJ1
the unit cell in a certain lattice consists of a cube formed by an anion, a, at each corner, an anion in the center, and a cation,x, at the center of each face. how many anions and cations are there in the unit cell?
Answer: There are 8 anions and 6 cations in the unit cell.
There are 8 anions and 6 cations in the unit cell. The unit cell consists of a cube, with an anion, 'a', at each corner, an anion in the center, and a cation, 'x', at the center of each face.
The cube is made up of 8 cubes, each of which is made up of one anion at each corner, and one cation at the center. Therefore, there are 8 anions in the unit cell, one at each corner. In addition, there is an anion in the center of the unit cell.
The 6 cations are located in the center of each of the faces of the cube. The cations are located in the middle of each face and therefore, there are 6 cations in the unit cell.
In total, there are 8 anions and 6 cations in the unit cell.
Learn more anions and cations here:
https://brainly.com/question/20781422#
#SPJ11
as electrons are passed down an electron transport system, choose one: a. h2o is produced. b. the electrons are also pumped across a membrane. c. protons are pumped across a membrane. d. nadh is produced.
As electrons are passed down an electron transport system protons are pumped across a membrane.
The correct answer is option C.
When electrons pass through the electron transport chain, they lose energy. As low-energy electrons break down oxygen molecules and produce water, high-energy electrons from NADH or FADH2 complete the chain. The electron transport pathway produces three molecules of water for every three carbon sugars broken down during aerobic respiration.
This means that when six carbon sugars are broken down, six molecules of water are produced. The end products of electron transport include NAD+, FAD, water, and protons. Since protons are propelled through the crystal membrane by the free energy of electron transport, they exit the mitochondrial matrix.
Learn more about electron transport system at
https://brainly.com/question/28163074
#SPJ4
a metal will be placed in fire and an electron will absorb enough energy to be promoted to a higher energy state. what do we call this higher energy state?
When a metal is placed in the fire and an electron absorbs enough energy to be promoted to a higher energy state, this higher energy state is referred to as the excited state.
An excited state is a state of a molecule or atom in which it has absorbed sufficient energy to move an electron from its current orbital to a higher orbital. This state is referred to as the excited state, and the electron that has been elevated to a higher energy level is said to be in an excited state.
The reason behind the electron's promotion to a higher energy state when a metal is placed in fire is that the heat causes the electrons to absorb energy, which causes them to move to a higher energy state. When electrons move to higher energy states, they release energy in the form of light, heat, or other radiation.
Learn more about electron https://brainly.com/question/26084288
#SPJ11
citric acid contains 37.51% c, 4.20% h, and 58.29% o by mass. what is the empirical formula of this compound?
The empirical formula of the given compound can be determined as follows the CHOS or C3H4O3.
According to the given data, the compound citric acid contains 37.51% C, 4.20% H, and 58.29% O by mass. So, let's assume that we have 100 g of citric acid, and then, we can find the masses of each element present in it: Mass of carbon = 37.51 gMass of hydrogen = 4.20 g. Mass of oxygen = 58.29 g.
Next, we need to convert the masses into the number of moles using the molar masses of the elements. The molar mass of carbon = 12.01 g/mol, Number of moles of carbon = 37.51 g / 12.01 g/mol = 3.124 molMolar mass of hydrogen = 1.01 g/molNumber of moles of hydrogen = 4.20 g / 1.01 g/mol = 4.158 molMolar mass of oxygen = 16.00 g/molNumber of moles of oxygen = 58.29 g / 16.00 g/mol = 3.643 follow, we need to find the simplest whole-number ratio of these moles by dividing them by the smallest number of moles, which is 3.124 mol: Carbon = 3.124 mol / 3.124 mol = 1Hydrogen = 4.158 mol / 3.124 mol = 1.33 ≈ 1Oxygen = 3.643 mol / 3.124 mol = 1.17 ≈ 1So, the empirical formula of citric acid is CHOS or C3H4O3.
Read more about carbon:
https://brainly.com/question/19083306
#SPJ11
What would you predict, the solubility of KHT (solid) in pure water compared with the solubility of KHT (solid) in a 0.1 M KCl solution, which one will be higher? Explain your answer.
The solubility of KHT (solid) in pure water compared with the solubility of KHT (solid) in a 0.1 M KCl solution is predicted to be higher in the 0.1 M KCl solution. This is because the KCl solution has a higher ionic strength, increasing the solubility of ionic compounds like KHT.
Let's understand this in detail:
What is solubility?
Solubility is defined as the ability of a substance to dissolve in a particular solvent under certain conditions. It measures the maximum amount of solute that can be dissolved in a given amount of solvent at a particular temperature, pressure, and other conditions.
Solubility of KHT in pure water:
KHT (Potassium hydrogen tartrate) is a weak acid salt that has low solubility in pure water. The solubility of KHT in pure water is affected by various factors such as temperature, pH, and pressure. The solubility of KHT in pure water is around 4.4 g/L at room temperature.
Solubility of KHT in 0.1 M KCl solution: The solubility of KHT in a 0.1 M KCl solution is predicted to be higher than in pure water. KCl is an ionic salt dissociating in water to produce K+ and Cl- ions. The presence of KCl increases the ionic strength of the solution. This ionic strength improves the solubility of other ionic compounds, such as KHT. KHT has a higher solubility in a 0.1 M KCl solution than in pure water due to this reason.
#SPJ11
Learn more about solubility: Explain how you would find the solubility of a solute https://brainly.com/question/23946616