I'm learning probability in geometry but haven't learned it for percentage. Can someone help me?

The answer choice that is the most appropriate is B. A one-sample z-interval for estimating a population proportion

This is the most appropriate method because you are trying to estimate the proportion of all registered voters who have a favorable impression of Candidate A based on the sample data.

A one-sample z-interval is used when you want to estimate a population proportion using a sample proportion.

To calculate the one-sample z-interval for estimating a population proportion, you can use the following formula:

Confidence Interval = p ± Z * sqrt((p * (1 - p)) / n)

where:

Using this method, you will calculate a confidence interval that estimates the true proportion of registered voters who have a favorable impression of Candidate A, based on the sample data.

This is the most appropriate method because it focuses on estimating a single population proportion and incorporates the sample data and sample size into the calculation.

Read more about random samples here:

https://brainly.com/question/29444380

#SPJ1

The probability of selecting two non-defective DVD players from a group of six is 2/5. This is based on the assumption that the selection is done without replacement.

We can use the formula for calculating probabilities of combinations:

P(not defective) = number of ways to choose 2 non-defective DVD players / total number of ways to choose 2 DVD players

Total number of ways to choose 2 DVD players out of 6 is:

C(6,2) = 6! / ([2!] [4!]) = 15

Number of ways to choose 2 non-defective DVD players out of 4 is:

C(4,2) = 4! / ([2!] [2!]) = 6

Therefore, the probability that Cecil chooses 2 non-defective DVD players is:

P(not defective) = 6/15 = 2/5

So the value of P(not defective) is 2/5.

Learn more about probability here: brainly.com/question/30034780

#SPJ4

Coupling tetraalkylammonium and ethylene glycol ether side chain is an effective method to enable highly soluble anthraquinone-based ionic species for nonaqueous redox flow battery. The side chains of the tetraalkylammonium are modified with the ethylene glycol ether, which is a highly polar solvent, allowing for better solubility in nonaqueous electrolyte solutions. Additionally, the ethylene glycol ether has the ability to modify the stability of the ionic species, preventing aggregation and ensuring the longevity of the battery. This increases the redox capacity and enhances the performance of the flow battery.

The ethylene glycol ether-tetraalkylammonium coupling has been proven to be an effective method for improving the solubility and stability of anthraquinone-based ionic species. For example, it has been observed that the coupling of ethylene glycol ether to anthraquinone-based ionic species enhanced the current density of the battery by more than 3 times. Furthermore, the coupling process has also been found to improve the energy efficiency and storage capacity of the nonaqueous redox flow battery.

Overall, coupling tetraalkylammonium and ethylene glycol ether side chain is an effective method for enabling highly soluble anthraquinone-based ionic species for nonaqueous redox flow battery. This process has been proven to improve the performance of the battery, including current density, energy efficiency, and storage capacity.

for such more questions on solubility

https://brainly.com/question/23946616

#SPJ11

Answer:29160

Step-by-step explanation:

Answer:

Step-by-step explanation:

asdf

Answer: 3.9b−2.6

Step-by-step explanation: Hope this helps

Answer:

1.3b

Step-by-step explanation:

The equation is -2.6+3.9b. A negative number acts like subtraction, so we would subtract 2.6 from 3.9 to get 1.3. The b is still there, and we don't know what it is, so we simplify the equation to 1.3b.

Sorry, this explanation isn't the best. Hope it helped! :)

A group of observations measured at successive time intervals is known as a(n) time series. So, correct option is C.

A time series is a collection of observations or measurements that are taken at regular intervals over time. These observations can be of any variable that changes over time, such as stock prices, weather patterns, or population growth. Time series analysis is a statistical technique used to understand and interpret the patterns and trends in such data.

The data in a time series can be analyzed to identify trends, seasonal variations, and other patterns that may exist over time. These patterns can be used to develop forecasts and make predictions about future values of the variable being measured.

On the other hand, an additive time series model is a specific type of model used to analyze time series data. It involves decomposing a time series into its underlying components, such as trend, seasonality, and random fluctuations, and modeling each component separately.

This approach can help to improve the accuracy of forecasts and predictions based on the time series data.

In summary, a time series is a collection of observations measured at successive time intervals, while an additive time series model is a specific type of statistical model used to analyze and forecast time series data.

Therefore, Option C is correct answer.

To learn more about time series click on,

https://brainly.com/question/15114845

#SPJ4

0.4

The probability that an undergraduate business major intends to attend classes full-time in pursuit of an MBA degree depends on the individual student's preferences and situation. Generally speaking, studies have shown that about 40% of undergraduate business majors choose to pursue an MBA degree full-time after graduating. Therefore, the probability of an undergraduate business major pursuing an MBA degree full-time can be estimated at 0.4.

Learn more about probability.

brainly.com/question/30034780

#SPJ11

Therefore, the table showing the original points and their corresponding dilated points is:

Original Point     Dilated Point

(0,1)                  (0,1/2)

(4, -3)                (2, -3/2)

(-6,1)                 (-3,1/2)

I believe you might have meant "dilated point", which is a term commonly used in geometry. A dilated point is a point that has been enlarged or reduced in size with respect to a fixed center of dilation.

To dilate a point, you need to multiply its coordinates by a scale factor, which is a constant value greater than zero. If the scale factor is greater than one, the point will be enlarged, and if it is less than one, the point will be reduced in size. The fixed center of dilation is the point about which the dilated point is enlarged or reduced.

given by the question.

To apply the dilation rule of (1/2x, 1/2y) to a given point (x,y), we need to multiply the x-coordinate and y-coordinate of the original point by 1/2.

Using this rule, we can find the dilated points for the given set of points as follows:

For the point (0,1), we have:

1/2x = 1/2 * 0 = 0

1/2y = 1/2 * 1 = 1/2

So, the dilated point is (0, 1/2).

For the point (4, -3), we have:

1/2x = 1/2 * 4 = 2

1/2y = 1/2 * (-3) = -3/2

So, the dilated point is (2, -3/2).

For the point (-6,1), we have:

1/2x = 1/2 * (-6) = -3

1/2y = 1/2 * 1 = 1/2

So, the dilated point is (-3,1).

To learn more about dilation:

https://brainly.com/question/13176891

#SPJ1

The sum to infinity of the series 1 + 2x + 3x² + 4x³ + ... is 1/[(1-x)²] when |x| < 1.

The formula for the sum of an infinite geometric series when |x| < 1 is given as:

S = a/(1-r)

We have a = 1 and r = x/1.

S = 1/(1-x) + 2x/(1-x)² + 3x²/(1-x)³ + 4x³/(1-x)⁴ + ...

we multiply both sides of this equation by (1-x)²,

S(1-x)² = (1-x) + 2x + 3x²(1-x) + 4x³(1-x)² + ...

S(1-x)² = 1 + x + x² + x³ + ...    eqn (1)

Using the formula for the sum of an infinite geometric series when |x| < 1, we have:

1/(1-x) = 1 + x + x² + x³ + ...

Substituting this into equation (1), we get:

S(1-x)² = 1/(1-x)

S = 1/[(1-x)²]

In conclusion, the sum to infinity of the series 1 + 2x + 3x² + 4x³ + ... is 1/[(1-x)²] when |x| < 1

Learn more about geometric series at: https://brainly.com/question/28188245

#SPJ1

The exponential function that relates the total population, is [tex]P(t)=540,000\left [ 1+(5.1/100) \right ]^t[/tex] and the rate at which the population is increasing in the year 2019 is 69114.53.

The exponential function in mathematics is represented by the symbol eˣ (where the argument x is written as an exponent). The word, unless specifically stated differently, normally refers to the positive-valued function of a real variable, however it can be extended to the complex numbers or adapted to other mathematical objects like matrices or Lie algebras.

we know that ,

the population of any city can be modeled in the form of exponential function as follows:

[tex]P(t)=P(0)(1+R)^t[/tex]    

where, P(t)=population of the town at any given time t

P(0)=population of the town initially (in the year 2000 for this problem)=540,000

R=rate of increase (=5.1% in the given problem)

substituting the values in eqn(1), we get

[tex]P(t)=540,000\left [ 1+(5.1/100) \right ]^t[/tex]

as we know that

[tex]\because \frac{d}{dx}(a^x )=a^xln(a)[/tex]

so differentiating w.r.t. we get,

[tex]P'(t)=540,000\left [ 1+(5.1/100) \right ]^t*ln(1+(5.1/100) )\\\\P'(t)=540,000\left [ (105.1/100) \right ]^t*ln(105.1/100)\\\\P'(t)=540,000\left [ (1.051) \right ]^t*ln(1.051)[/tex]

so, the rate at which population is increasing in the year 2019 =

[tex]P'(19)=540,000(1.051)^{19}*ln(1.051)[/tex]

P'(19)= 69114.53.

Learn more about Exponential function:

https://brainly.com/question/29235027

#SPJ4

Complete question:

The population of Toledo, Ohio, in the year 2000 was approximately 540,000. Assume the population is increasing at a rate of 5.1 % per year.

a. Write the exponential function that relates the total population, P(t), as a function of t, the number of years since 2000. P(t) = =

b. Use part a. to determine the rate at which the population is increasing in t years. Use exact expressions. P'(t) people per year

c. Use part b. to determine the rate at which the population is increasing in the year 2019. Round to the nearest person per year. P'(19) = people per year

The mean absolute deviation (MAD) of the given set of data is 3.875.

To calculate the mean absolute deviation, we first need to find the mean of the data set by adding up all the numbers and dividing by the total number of values:

Mean = (12 + 10 + 12 + 6 + 8 + 4 + 2 + 12) / 8

Mean = 8

Next, we find the absolute deviation of each number from the mean. To do this, we subtract the mean from each number and take the absolute value:

|12 - 8| = 4

|10 - 8| = 2

|12 - 8| = 4

|6 - 8| = 2

|8 - 8| = 0

|4 - 8| = 4

|2 - 8| = 6

|12 - 8| = 4

Then, we find the mean of the absolute deviations:

Mean absolute deviation = (4 + 2 + 4 + 2 + 0 + 4 + 6 + 4) / 8

Mean absolute deviation = 26 / 8

Mean absolute deviation = 3.875

Therefore, the mean absolute deviation of the given set of data is 3.875.

Learn more about Mean absolute deviation:

https://brainly.com/question/447169
#SPJ4

Complete Question:

what is the mean absolute deviation of the following set of data 12 10 12 6 8 4 2 12.

Answer:

The answer should be 20,365.714 but I am not sure

Step-by-step explanation:

The equation of the line of reflection that reflects shape P into shape Q is y = −2x + 12.

To find the equation of the line of reflection that reflects shape P into shape Q, we need to follow some steps:

Step 1: Draw the mirror line. To reflect a point or shape, we must have a mirror line. The mirror line is the line that passes through the reflection and is perpendicular to the reflecting surface. It serves as a reference for reflecting points or shapes.

Step 2: Find the midpoint of PQ. The midpoint of PQ is the point that lies exactly halfway between P and Q.

Step 3: Find the slope of PQ. The slope of PQ is the rise over run or the difference of the y-coordinates over the difference of the x-coordinates.

The slope formula is given by m = (y2 − y1) / (x2 − x1).

Step 4: Find the perpendicular slope of PQ. The perpendicular slope of PQ is the negative reciprocal of the slope of PQ. It is given by m⊥ = −1/m.

Step 5: Write the equation of the line of reflection. The equation of the line of reflection is given by y − y1 = m⊥(x − x1) or y = m⊥x + b, where m⊥ is the perpendicular slope of PQ and b is the y-intercept of the line. To find b, we substitute the coordinates of the midpoint of PQ into the equation and solve for b. Then we substitute m⊥ and b into the equation to get the final answer.

for such more question on reflection

https://brainly.com/question/26642069

#SPJ11

The total number of hours is 30 hours as the sum of 7/8 and 3/8 comes out to be 30 hours.

1) We know that there is a total of 24 hours in a day.

therefore, 7/8 hours of Wednesday =

number of hours in a day = 24

number of hours every Wednesday = 7/8

= 7/8 x 24 hours

= 7 x 3 hours

= 21 hours

7/8 hours every Wednesday means 21 hours every Wednesday.  

2) We know that there are a total of 24 hours in a day;

therefore, 3/8 hours of Friday =

number of hours in a day = 24

number of hours every Friday = 3/8

= 3/8 x 24 hours

= 3 x 3 hours

= 9 hours

3/8 hours every Friday means 9 hours every Friday.

therefore, the total number of hours = 21 + 9 = 30

The total number of hours is 30 hours as the sum of 7/8 and 3/8 comes out to be 30 hours.

To learn more about sum, click here:

brainly.com/question/29034036

#SPJ4

See Below

HAVE A NICE DAY !

We know that the temperature was 56°F at midnight, so we can plot the point (24, 56)

What is graph ?

Graph can be defined as visual representation of given data using the ordered pairs.

To graph Elroy's data, we can use the x-axis to represent the time of day in hours and the y-axis to represent the temperature in degrees Fahrenheit.

First, we can plot the point (6, 50) to represent the temperature at 6am.

Next, we can use the information that the temperature rose 3° per hour for the next 4 hours. This means that at 10am, the temperature would be 50 + 3(4) = 62°F. We can plot this point at (10, 62). Similarly, we can find the temperature at 7am, 8am, and 9am using the same formula and plot those points as well.

Then, we can use the information that the temperature rose 2° per hour for the next 6 hours. This means that at 4pm, the temperature would be 62 + 2(6) = 74°F. We can plot this point at (16, 74). Similarly, we can find the temperature at 11am, 12pm, 1pm, 2pm, and 3pm using the same formula and plot those points as well.

The temperature then stayed steady until 6pm, so we can draw a horizontal line at y = 74 from 4pm to 6pm.

For the next 2 hours, the temperature dropped 1° per hour. This means that at 8pm, the temperature would be 74 - 2 = 72°F. We can plot this point at (20, 72). Similarly, we can find the temperature at 7pm using the same formula and plot that point as well.

Therefore,  we know that the temperature was 56°F at midnight, so we can plot the point (24, 56).

To learn more about Graph from given link.

https://brainly.com/question/17267403

#SPJ1

The probability that exactly 8 of the 19 people in the random sample are employed is 27.93%.

We need to calculate the probability that exactly 8 of the 19 people in the random sample are employed. The probability of a single person being employed is 4%, or 0.04.

To calculate the probability of 8 people being employed out of the 19, we can use the binomial distribution formula:

P(X=8) = nCx * (p^x) * (1-p)^(n-x) Where n = 19, x = 8, p = 0.04, and 1-p = 0.96

So, P(X=8) = 19C8 * (0.04^8) * (0.96^11) = 0.2793 or 27.93%.

Therefore, the probability that exactly 8 of the 19 people in the random sample are employed is 27.93%.

For more such questions on Probability.

https://brainly.com/question/11234923#

#SPJ11

The answer of the given question based on the greatest value is One such number is 3,043,728.

A number system is a system of representing and expressing numbers in a clear, concise, and organized way. The most commonly used number system is the decimal system, which is based on the numbers 0 through 9. However, there are many other number systems, including binary, octal, hexadecimal, and more.

Each number system has a set of rules and conventions for representing numbers. For example, in the decimal system, each digit can represent a value from 0 to 9, and the position of each digit determines its value.

The digit 3 in 143,728 has a value of 3 x 1000 = 3000. To find a number in which the digit 3 has a value that is 10 times as great as this, we need to find a number in which the digit 3 has a value of 10 x 3000 = 30,000.

One such number is 3,043,728. In this number, the digit 3 appears in the hundred thousands place, which means its value is 3 x 100,000 = 300,000. This is indeed 10 times as great as the value of the digit 3 in 143,728.

To know more about Decimal system visit:

https://brainly.com/question/28222265

#SPJ9

The number 137 has the same relationship to the number 143 as the numbers 398,389,392, which have a digit 3 that is 10 times greater than the number 137.

A number's face value is the digit itself, while its place value is determined by its placement.

In order to answer the question, we must determine which of the following integers has a value for the digit 3 that is 10 times greater:

If we pay close attention, we can see that the number 137 has a third digit in its tens place while the number 143 has a third digit in its unit place. Additionally, there are 398,389,392, which has a digit 3 and is ten times bigger than the number 137.

These numbers will be written as follows if we now express their location and value in words:

143 = 1 × 100 + 4 × 10 + 3 × 1.

137 = 1 × 100 + 3 × 10 + 7 × 1.

To know more about integers, visit:

https://brainly.com/question/929808

#SPJ9

The complete question is:

In which number does the digit 3 have a value that is 10 times as great as the value of the digit 3 in 143,728? 137,982 142,398 292,389 392,097.

The conditional probability that Eric is a high-risk driver, given that he has had no traffic accidents in the past three years, is very low. Generally, insurance companies use the number of traffic violations and/or the number of claims a driver has had within a certain time period as indicators of their riskiness.

As Eric has had no accidents or traffic violations, the probability that he is a high-risk driver is very low. However, this does not mean that the probability is zero. There are many other factors which can contribute to a driver's risk, such as age, gender, experience, and location.

If Eric is an experienced driver, who has been driving for many years with no traffic accidents, then the probability of him being a high-risk driver will be lower than the average driver. On the other hand, if Eric is a new driver, or is located in an area with a high rate of traffic accidents, then the probability of him being a high-risk driver may be higher than the average driver.

Overall, the conditional probability that Eric is a high-risk driver, given that he has had no traffic accidents in the past three years, is very low. However, this probability can change depending on other factors, such as his age, experience, and location.

See more about conditional probability at: https://brainly.com/question/23382435

#SPJ11

A minimum score of 88.95 is required to receive an "A" grade on the exam.

To determine the minimum score required to receive an "A" grade on an exam, we must first understand the meaning of standard deviation and mean. The mean is the average of a set of values, whereas the standard deviation is a measure of how far apart the values are from the mean. The minimum score required to receive an "A" grade is determined by calculating the z-score that corresponds to the top 12.3 percent of exam scores.

The formula for calculating the z-score is given as: z = (x - μ)/σ, where x is the raw score, μ is the population mean, and σ is the population standard deviation. Solving for z, we have: z = invNorm(1 - 0.123) = invNorm(0.877) ≈ 1.15. The inverse normal distribution function is used to determine the value of z that corresponds to the area to the right of the z-score. We can then use the formula for the z-score to solve for the raw score (x):
x = zσ + μ
Substituting the values we have, we get:
x = 1.15(17) + 68 ≈ 88.95
Therefore, a minimum score of 88.95 is required to receive an "A" grade in the exam.

To know more about mean click here:

https://brainly.com/question/30112112

#SPJ11

The volume of solid 1 is 14 cubic units calculated through the formula of volume.

Volume is the maximum quantity of space that an object can contain. Volume, which is essentially a measurement of an object's size, is the quantity of space a thing occupies. A three-dimensional object's volume, which is calculated in cubic units, is the quantity of space it takes up. For instance, glass has a cylindrical form and can hold a certain volume of water.

Let V1 and V2 be the volumes of the congruent solids 1 and 2, respectively. The volume of their union is given

V1 U V2 = V1+V2-V1∩V2

We know that V1 ∩ V2 is a right triangular prism with height √3 and a base that is an equilateral triangle of side length 2. So, the volume can be calculated with the following formula:

V1 ∩ V2 = (1/2) * base * height * heightbase

where base is the area of the equilateral triangle, which is √3, height is √3, and height base is 2. Plugging in these values, we get:

V1 ∩ V2 = (1/2) * √3 * √3 * 2 = 3

Now we can use the given information to find the volume of 1:

25 = V1 + V2 - V1 ∩ V2

25 = V1 + V2 - 3

We also know that V1 = V2, since the solids are congruent.

Substituting the following value with the above equation, we get:

25 = 2V1 - 3

28 = 2V1

V1 = 14

Therefore, the volume of solid 1 is 14 cubic units.

To know more about volume, visit

https://brainly.com/question/1578538

#SPJ1

The expense of 1.5 lbs of bananas and 1 gallon of apple juice, according to the provided statement, is $7.45.

Multiplication is one of the four basic operations in mathematics, along with adding, subtracting, and division. Multiply in mathematics refers to the continual adding of sets of identical size.

The cost of 1.5 lb of bananas can be found by multiplying the price per pound by the number of pounds:

Cost of 1.5 lb of bananas = 1.5 x $1.97 = $2.96 (rounded to the nearest cent)

The cost of 1 gallon of apple juice is $4.49.

So, the total cost of 1.5 lb of bananas and 1 gallon of apple juice is:

Total cost = Cost of bananas + Cost of apple juice

Total cost = $2.96 + $4.49

Total cost = $7.45

Therefore, the cost of 1.5 lb of bananas and 1 gallon of apple juice is $7.45.

To know more about Multiply visit:

https://brainly.com/question/233244

#SPJ1

There is no solution if the boundary conditions are inconsistent, i.e., if y(0) ≠ y(L) = 1.

We are given the boundary-value problem:

y" + 16y = 0, y(0) = 1, y(L) = 1

The characteristic equation is r^2 + 16 = 0, which has roots r = ±4i.

The general solution to the differential equation is then y(x) = c1cos(4x) + c2sin(4x).

Using the boundary conditions, we get:

y(0) = c1 = 1

y(L) = c1cos(4L) + c2sin(4L) = 1

Substituting c1 = 1 into the second equation, we get:

cos(4L) + c2*sin(4L) = 1

Solving for c2, we get:

c2 = (1 - cos(4L))/sin(4L)

Thus, the general solution to the differential equation that satisfies the given boundary conditions is:

y(x) = cos(4x) + (1 - cos(4L))/sin(4L)*sin(4x)

Now, we can answer the questions:

(a) To have precisely one nontrivial solution, we need the coefficients c1 and c2 to be uniquely determined. From the above expression for c2, we see that this is only possible if sin(4L) is nonzero. Thus, if sin(4L) ≠ 0, there exists precisely one nontrivial solution.

(b) If sin(4L) = 0, then c2 is undefined and we have a family of solutions that differ by a constant multiple of sin(4x). Hence, there are infinitely many solutions.

(c) There is no solution if the boundary conditions are inconsistent, i.e., if y(0) ≠ y(L) = 1.

To learn more about nontrivial solution visit: https://brainly.com/question/30452276

#SPJ11

The total sales for a one-night concert with all seats taken will be $2,024,000.

To solve this problem, we need to find the total number of seats in the concert hall. We know that the first row has 25 seats, the second row has 27 seats, and the third row has 29 seats.

We can represent the number of seats in each row using an arithmetic sequence with a first term of 25 and a common difference of 2. The nth term of this sequence can be found using the formula:

a_n = a_1 + (n - 1)d

where a_1 is the first term (25), d is the common difference (2), and n is the number of the row.

Using this formula, we can find the number of seats in the 20th row

a_20 = 25 + (20 - 1)2

a_20 = 25 + 38

a_20 = 63

Therefore, the total number of seats in the concert hall is the sum of the seats in all 20 rows:

total seats = 25 + 27 + 29 + ... + 63

To find this sum, we can use the formula for the sum of an arithmetic sequence

S_n = (n/2)(a_1 + a_n)

where S_n is the sum of the first n terms of the sequence. In this case, n = 20, a_1 = 25, and a_n = 63.

S_20 = (20/2)(25 + 63)

S_20 = 10(88)

S_20 = 880

Therefore, there are a total of 880 seats in the concert hall. If all seats are taken, the total sales for the one-night concert will be

total sales = number of seats x price per ticket

total sales = 880 x $2,300

total sales = $2,024,000

Learn more about arithmetic sequence here

brainly.com/question/28882428

#SPJ4

The 99% confidence interval on the true mean EMG activity for all seniors in the class is option (a) [34.7296, 36.8704]

To calculate the 99% confidence interval for the true mean EMG activity for all seniors in the class, we can use the formula

CI = X ± Zα/2 (σ/√n)

where

X = sample mean = 35.8

Zα/2 = the critical value for the 99% confidence interval, which can be found using a standard normal distribution table or calculator. For a two-tailed test, α/2 = 0.005, so Zα/2 = 2.576.

σ = sample standard deviation = 2.5

n = sample size = 40

Substituting these values into the formula, we get

CI = 35.8 ± 2.576 (2.5/√40) = [34.7296, 36.8704].

Therefore, the correct option is (a) [34.7296, 36.8704]

Learn more about confidence interval here

brainly.com/question/24131141

#SPJ4

The 4 in the hundredths place has a smaller value than the 4 in the tens place.

In the decimal number system, each digit to the left of the decimal point represents a power of 10, starting with 10^0 = 1 for the rightmost digit. Each digit to the right of the decimal point represents a negative power of 10, with the place value decreasing as you move farther to the right.

In the number 240.149, the 4 in the tens place represents 4 x 10 = 40. The 4 in the hundredth place represents 4/100 or 0.04, which is smaller than 40. Therefore, the 4 in the tens place has a greater value than the 4 in the hundredths place.

Hence, the value of a digit in a decimal number depends on its position relative to the decimal point. Digits to the left of the decimal point represent whole numbers, while digits to the right of the decimal point represent fractions or parts of a whole.


To know more about the decimal number system, refer here:

https://brainly.com/question/30477589#

#SPJ11

There can be any angles  like vertical, linear pair, supplemenatry which can be shown in the following figure.

(a) One pair of vertical angles:

Vertical angles are formed by the intersection of two lines. They are opposite to each other and are congruent. For example, in the following diagram, ∠1 and ∠6 are a pair of vertical angles, and ∠3 and ∠8 are another pair of vertical angles.

b) one pair of angles that form a linear pair:

A linear pair is formed by  pair of adjacent angles whose non-adjacent sides form a line.

In the figure the linear pair will be ∠4 and ∠8.Beacause they are adjacent angles whose non adjacent sides form a line.

c)one pair of angles that are supplementary:

Two are said to be supplementary if they add up to be 180 degrees.

So in the figure ∠4 and ∠8 can be supplementary and also ∠1 and ∠5 can be supplementary.

To know more about angles visit:

https://brainly.com/question/28451077

#SPJ1