A 3.0kg ball and a 1.0kg ball are placed at opposite ends of a massless beam so that the system is i equilibrium as shown. What is the value of the ratio of the lengths, b/a?

2,364 ÷ 57 ≈ 41. Therefore, Hannah made 41 full bags of candy.

To solve this problem, we use integer division to find the number of full bags Hannah made. We divide the total number of candy pieces by the number of pieces in each bag and take the integer part of the result. This is because we are only interested in the number of full bags, not partial bags. In this case, we have 2,364 pieces of candy and each bag holds 57 pieces, so 2,364 ÷ 57 ≈ 41. This means that Hannah made 41 full bags of candy.

Learn more about integer here: brainly.com/question/15276410

#SPJ4

Since GM is tangent tο circle O at pοint G, the intercepted arc GE has measure zerο. ,then ∠SGM = 84°.

Secant line is alsο knοwn as average rate οf change οf functiοns between twο pοints and alsο called slοpe.

the tangent line is perpendicular tο the radius that passes thrοugh the pοint οf tangency. Therefοre, we have:

m∠MGS = 90°

Alsο, we knοw that the measure οf an angle fοrmed by a tangent line and a secant line that intersect οutside the circle is half the difference οf the intercepted arcs.

m∠SGM = 1/2 (mSE - mGE)

where SE is the intercepted arc by secant GS, and GE is the intercepted arc by tangent GM.

Since GM is tangent tο circle O at pοint G, the intercepted arc GE has measure zerο.

mSE = 2mGS

mSE = 2(84°) = 168°

m∠SGM = 1/2 (mSE - mGE) = 1/2 (168° - 0°) = 84°

Therefοre, m∠SGM = 84°.

To knοw more about secant line visit,

https://brainly.com/question/14438198

#SPJ1

The probability of finding 10 defective cores in a sample of 10 power cores is approximately 0.0000161, or about 0.0016%.

Assuming that each fuel rod is independent of each other and that the probability of finding a defective fuel rod is constant at 0.1%, we can model the number of defective fuel rods in a power core with a binomial distribution. Let X be the number of defective fuel rods in one power core, then X follows a binomial distribution with parameters n = 50000 and p = 0.1/100 = 0.001.

To find the probability of finding 10 defective cores, we can use the binomial distribution again, but with a different set of parameters. Let Y be the number of defective cores in a sample of 10 power cores, then Y follows a binomial distribution with parameters n = 10 and p = P(X ≥ 1), where P(X ≥ 1) is the probability of finding at least one defective fuel rod in one power core. We can find P(X ≥ 1) using the complement rule:

P(X ≥ 1) = 1 - P(X = 0)

= 1 - (1 - 0.001)^50000

≈ 0.3935

So, the probability of finding 10 defective cores in a sample of 10 power cores is:

P(Y = 10) = (10 choose 10) * (0.3935)^10 * (1 - 0.3935)^(10 - 10)

≈ 0.0000161

Learn more about Probability at:

brainly.com/question/24756209

#SPJ4

Complete Question:

a power core contains about 50000 fuel rods. if the probability to find one defective fuel rod is 0.1%, what is the probability to find 10 defective cores.

Each student should receive 1/2 kg of soil.

To find out how much soil each student will have, we need to first add up the total amount of soil collected and then divide it equally among the 10 students.

Let's start by converting all the amounts of soil to a common unit, such as kilograms:

3 students brought 1/4 kg each, so they brought a total of 3/4 kg.

4 students brought 1/2 kg each, so they brought a total of 2 kg.

3 students brought 3/4 kg each, so they brought a total of 2 1/4 kg.

Adding up these amounts, we get:

3/4 + 2 + 2 1/4 = 5 kg

So the total amount of soil collected is 5 kg.

To redistribute this soil equally among the 10 students, we need to divide it by 10:

5 kg ÷ 10 = 1/2 kg per student

Therefore, each student should receive 1/2 kg of soil.

To know more about Average visit:

brainly.com/question/24057012

#SPJ1

The characteristics of each function has been explored based on the table below.

The graph of each function is shown in the image attached below.

In order to use the given functions to complete the table, we would have to substitute each of the values of x (x-values) into the function and then evaluate as follows;

A. f(x) = 2x

x                      process             f(x)

-2                  f(-2) = 2(-2)            -4

-1                   f(-1) = 2(-1)              -2

0                   f(0) = 2(0)               0

1                    f(1) = 2(1)                 2

2                   f(2) = 2(2)                4

B. G(x) = x²

x                      process             f(x)

-2                  f(-2) = (-2)²            4

-1                   f(-1) = (-1)²              1

0                   f(0) = (0)²               0

1                    f(1) = (1)²                 1

2                   f(2) = (2)²               4

B. H(x) = 2ˣ

x                      process             f(x)

-2                  f(-2) = (2)⁻²            1/4

-1                   f(-1) = (2)⁻¹              1/2

0                   f(0) = (2)⁰                1

1                    f(1) = (2)¹                 2

2                   f(2) = (2)²               4

In this scenario and exercise, we would use an online graphing calculator to plot each of the given functions as shown in the graph attached below.

Read more on linear function here: brainly.com/question/27325295

#SPJ1

Therefore , the solution of the given problem of unitary method comes out to be hourly salary of $144, or 12 times the average hourly wage of $12 for phone reps.

This common convenience, already-existing variables, or all important elements from the original Diocesan adaptable study that followed a particular methodology can all be used to achieve the goal. Both of the crucial elements of a term affirmation outcome will surely be missed if it doesn't happen, but if it does, there will be another chance to get in touch with the entity.

Here,

The formula below can be used to determine the ideal amount of phone representatives:

=>  MR = MC

Where n is the amount of phone reps and 12 is their hourly wage, the cost is given by C = 12n.

The following results are obtained by taking the derivative of revenue and cost with regard to n:

=> MR=dR/dn = k

=>  dC/dn = 12 for MC.

When we set MR equal to MC, we obtain:

=> k = 12

Accordingly, Vi should hire as many phone representatives as are required to produce an hourly salary of $144, or 12 times the average hourly wage of $12 for phone reps.

To know more about unitary method  visit:

https://brainly.com/question/28276953

#SPJ1  

Therefore, the area of the polygon is 24 square units.

In mathematics, a coordinate is a set of numbers or values that represent the position or location of a point or an object in space. Typically, coordinates are used to describe points in two-dimensional (2D) or three-dimensional (3D) space.

In 2D space, coordinates are usually represented as pairs of numbers (x, y), where the first number (x) represents the horizontal distance of the point from the origin, and the second number (y) represents the vertical distance of the point from the origin.

by the question.

To find the area of the polygon defined by the given coordinates, we can use the Shoelace Formula:

[tex]Area = 1/2 * |(x1y2 + x2y3 + ... + xny1) - (y1x2 + y2x3 + ... + ynx1)|[/tex]

where?[tex](x_{1} ,y_1), (x_2,y_2), ..., (x_n,y_n)[/tex] are the coordinates of the vertices listed in order.

Plugging in the given coordinates in order, we get:

[tex]Area = 1/2 * |(-12 + -5(-3) + (-5)(-5) + (-2)(-2) + 22 + 4(-2)) - (4*(-5) + (-5)(-5) + (-3)(-2) + (-2)2 + 2(-1) + 2*(-5))|= 1/2 * |-2 - 125 + 25 - 4 + 8 + 8 + 20 + 10 + 2 + 10|= 1/2 * |-48|=24[/tex]

To learn more about coordinates:

https://brainly.com/question/16634867

#SPJ1

The point that partitions segment AB in a 1:4 ratio is (-1, -0.4).

In this scenario, line ratio would be used to determine the coordinates of the point Q on the directed line segment AB that partitions the segment into a ratio of 1 to 4.

In Mathematics, line ratio can be used to determine the coordinates of Q and this is modeled by the following mathematical expression:

Q(x, y) = [(mx₂ + nx₁)/(m + n)],  [(my₂ + ny₁)/(m + n)]

Substituting the given parameters into the line ratio formula, we have;

Q(x, y) = [(1(7) + 4(-3))/(1 + 4)],  [(1(-10) + 4(2))/(1 + 4)]

Q(x, y) = [(7 - 12)/(5)],  [(-10 + 8)/5]

Q(x, y) = [-5/5],  [(-2)/(5)]

Q(x, y) = [-1, -2/5]

Q(x, y) = [-1, -0.4]

Read more on line ratio here: brainly.com/question/14457392

#SPJ1

The given equation is 7(x+4) = -21 . Therefore, the value of x is 7

In mathematics, an equation is a formula that connects two expressions with the equal sign = to indicate that they are equal. An equation is made up of two expressions joined by an equal sign ("="). Expressions for both sides of the equals sign are called the "left side" and the "right side" of the equation. Many times the right side of the equation is assumed to be zero. Assuming this does not reduce generality, this can be achieved by subtracting the right side from both sides.

According to the Question:

The given equation is:

   7(x+4)= -21

⇒ 7x + 28 = -21

⇒ 7x = -49

⇒ x = 7

Complete Question:

Solve the Equation : 7(x+4)= -21

Learn more about Equation:

https://brainly.com/question/29273511

#SPJ4

None of these options

Option A

Conversion of measurement of Metres to Centimetres can be done by multiplying the number by 100

1 metre = 100 centimetres

5.2 metres = 520 centimetres

Option B

Conversion of measurement of Metres to Decametres can be done by multiplying the number by 0.1

1 metre = 0.1 decametres

5.2 metres = 0.52 decametres

Option C

Conversion of measurement of Metres to Decimetres can be done by multiplying the number by 10

1 metre = 10 decimetres

5.2 metres = 52 decimetres

Option D

Conversion of measurement of Metres to Kilometres can be done by multiplying the number by 0.001

1 metre = 0.001 kilometres

5.2 metres = 0.0052 kilometres

Therefore,

5.2 metres = 520 centimetres

5.2 metres=  0.52 decametres

5.2 metres= 52 decimetres

5.2 metres= 0.0052 kilometres

To learn more about Measurements visit:

https://brainly.com/question/12652877

#SPJ1

The variance is 7.2.

We can use the binomial distribution formula to calculate the variance. The formula for the variance of a binomial distribution is

Variance = n × p × (1 - p)

where n is the number of trials, p is the probability of success on each trial, and (1 - p) is the probability of failure on each trial.

In this case, n = 30 (the number of homes on the route), p = 0.48 (the probability of a home having a dog), and (1 - p) = 0.52 (the probability of a home not having a dog).

The postal employee encountered 12 dogs, which means there were 18 homes without dogs. So, the actual probability of success in this case is

P(dogs) = 12/30 = 0.4

Using the formula above, we can calculate the variance

Variance = n × p × (1 - p)

= 30 × 0.4 × 0.6

= 7.2

Learn more about variance here

brainly.com/question/13558857

#SPJ4

Answer:

there

Step-by-step explanation:

The mean of a normal distribution is calculated by taking the sum of all the values and dividing it by the total number of values. In this case, the values were between 5.8 and 10.6, and the total number of values was 95.4%

The mean of a normal distribution is calculated by taking the sum of all the values and dividing it by the total number of values. In this case, the values are between 5.8 and 10.6, and the total number of values is 95.4%.

To calculate the mean, we must first calculate the sum of all the values. To do this, we will use the following formula:

sum of values = (lowest value + highest value) / 2

In this case, the lowest value is 5.8 and the highest value is 10.6, so the sum of values is 8.2.

We now have the sum of all the values, so we can calculate the mean by dividing the sum by the total number of values. The total number of values is 95.4%, so the mean is 8.2 / 0.954 = 8.57.

Therefore, the mean of the normal distribution is 8.57.

In conclusion, the mean of a normal distribution is calculated by taking the sum of all the values and dividing it by the total number of values. In this case, the values were between 5.8 and 10.6, and the total number of values was 95.4%. When the sum of all the values (8.2) was divided by the total number of values (0.954), the mean was calculated to be 8.57.

See more about normal distribution at: https://brainly.com/question/4079902

#SPJ11

Answer:

Step-by-step explanation:

It is possible if your friend has a bigger glass than you.

Answer:

33

Step-by-step explanation:

43-10=33 sarah has 33 bananas ledt

Answer:

Let's assume that the subset contains as many numbers as possible. We start by including all the numbers from 1 to 100 that are not divisible by 5. These are the numbers 1, 2, 3, 4, 6, 7, 8, 9, 11, 12, 13, 14, 16, 17, 18, 19, 21, 22, 23, 24, 26, 27, 28, 29, 31, 32, 33, 34, 36, 37, 38, 39, 41, 42, 43, 44, 46, 47, 48, 49, 51, 52, 53, 54, 56, 57, 58, 59, 61, 62, 63, 64, 66, 67, 68, 69, 71, 72, 73, 74, 76, 77, 78, 79, 81, 82, 83, 84, 86, 87, 88, 89, 91, 92, 93, 94, 96, 97, 98, 99.

This gives us a subset of 81 numbers. However, we need to remove any numbers that are multiples of other numbers in the subset. For example, if we include the number 6, we must remove 12, 18, 24, etc. Similarly, if we include the number 9, we must remove 18, 27, 36, etc. We can see that the only numbers that have multiples in the subset are 2, 3, 7, 8, 13, 17, 18, 19, 27, 28, 37, 38, 39, 52, 53, 54, 57, 58, 59, 68, 69, 73, 74, 78, 79, 83, 84, 87, 88, 89, 92, 93, 94, and 98.

Therefore, we need to remove these 34 numbers from the subset. This leaves us with a subset of 81 - 34 = 47 numbers.

However, we can still include the number 5, since it is not a multiple of any other number in the subset. This adds one more number to the subset, giving us a total of 48 numbers.

Therefore, the largest number of members that such a subset can have is 48, which corresponds to answer choice (e).

a. No, w is not in fv1; v2; v3g. There are three vectors in fv1; v2; v3g.

b. There are three vectors in the span of fv1; v2; v3g.

c. No, w is not in the subspace spanned by fv1; v2; v3g. This is because the subspace is the set of all linear combinations of the vectors in the span, and w does not have to be a linear combination of the vectors in the span.

To prove this, we first need to recall the definition of the span: it is the set of all linear combinations of a set of vectors. A linear combination is a sum of the vectors, multiplied by constants. For example, if we have a vector v1, and two constants a and b, then the linear combination of a*v1 and b*v1 is (a + b)*v1. If a vector w is not a linear combination of v1, then w is not in the span of v1.

The same logic applies to the vectors fv1; v2; v3g. If w is not a linear combination of these three vectors, then w is not in the subspace spanned by these three vectors. We can prove this by showing that w cannot be a linear combination of fv1; v2; v3g. This is because the only way to create a linear combination of these vectors is to multiply them by constants, and since w is not one of the vectors, it cannot be multiplied by a constant. Therefore, w is not in the subspace spanned by fv1; v2; v3g.

See more about linear combinations at: https://brainly.com/question/24219860

#SPJ11

Standard deviation and beta are both measures of risk, however Beta is used to measure systematic risk. The correct answer is option (B), beta measures only systematic risk.

Standard deviation and beta are both measures of risk, however, there are differences between them. Standard deviation is a measure of the variation or dispersion of a set of data values. It shows the average deviation of each value from the mean. It is expressed in the same units as the original data.

Beta, on the other hand, is a measure of the systematic risk of an investment relative to the market as a whole. It reflects the extent to which the return on a particular security or portfolio moves with the overall market, and is often used in the Capital Asset Pricing Model (CAPM) to estimate the required rate of return for an investment. It measures the sensitivity of the security's returns to the market.

The systematic risk of an investment is the risk that is associated with the market as a whole, rather than with a particular security. It is often referred to as market risk because it is based on factors that affect the entire market, such as changes in interest rates, inflation, or economic conditions.

Unsystematic risk, on the other hand, is the risk that is specific to a particular security or industry, and is caused by factors that affect that particular security or industry, such as management changes, lawsuits, or other events that affect the company's operations.

Learn more about 'Beta' here:

brainly.com/question/14271679

#SPJ11

0.18x + 4 - 0.40x = 2

-0.22x = -2

x = 9.09

Therefore, the pharmacist should mix 9.09 liters of 18% alcohol solution and 0.91 liters of 40% alcohol solution to make 10 liters of 20% alcohol solution.

[tex]x=\textit{Liters of solution at 18\%}\\\\ ~~~~~~ 18\%~of~x\implies \cfrac{18}{100}(x)\implies 0.18 (x) \\\\\\ y=\textit{Liters of solution at 40\%}\\\\ ~~~~~~ 40\%~of~y\implies \cfrac{40}{100}(y)\implies 0.4 (y) \\\\\\ \textit{10 Liters of solution at 20\%}\\\\ ~~~~~~ 20\%~of~10\implies \cfrac{20}{100}(10)\implies 2 \\\\[-0.35em] ~\dotfill[/tex]

[tex]\begin{array}{lcccl} &\stackrel{Liters}{quantity}&\stackrel{\textit{\% of Liters that is}}{\textit{alcohol only}}&\stackrel{\textit{Liters of}}{\textit{alcohol only}}\\ \cline{2-4}&\\ \textit{1st Sol'n}&x&0.18&0.18x\\ \textit{2nd Sol'n}&y&0.4&0.4y\\ \cline{2-4}&\\ mixture&10&0.2&2 \end{array}~\hfill \begin{cases} x + y = 10\\\\ 0.18x+0.4y=2 \end{cases} \\\\[-0.35em] ~\dotfill[/tex]

[tex]\stackrel{\textit{using the 1st equation}}{x+y=10\implies y=10-x} \\\\\\ \stackrel{\textit{substituting on the 2nd equation from above}}{0.18x+0.4(10-x)=2}\implies 0.18x+4-0.40x=2 \\\\\\ -0.22x+4=2\implies -0.22x=-2\implies x=\cfrac{-2}{-0.22}\implies \boxed{x\approx 9.09} \\\\\\ \stackrel{\textit{since we know that}}{y=10-x}\implies y\approx 10-9.09\implies \boxed{y\approx 0.91}[/tex]

8. Spread = SD = sqrt(2*df)

9. The difference between the observed and expected frequencies of the outcomes of a set of events or variables.

10. Degrees of 1 freedom does the chi-square distribution.

11.  The rule of thumb for all expected counts in a chi-square goodness of fit test is expected counts must be at least 5.

8. Describe the center and spread of the chi-square distributions.

Shape - skewed right because can't be zero

µ = df = tipping point

mode = df - 2 = peak

spread = SD = sqrt(2*df)

9. Chi-square test is a non-parametric test (a non-parametric statistical test is a test whose model does not specify conditions about the parameter of the population from which the sample is drawn.). It is used for identifying the relationship between a categorical variable and denoted by χ2.

10. A chi-squared distribution constructed by squaring a single standard normal distribution is said to have 1 degree of freedom. Thus, as the sample size for a hypothesis test increases, the distribution of the test statistic approaches a normal distribution.

11. The rule of thumb for all expected counts in a chi-square goodness of fit test is expected counts must be at least 5.

Learn more about Chi- square distribution at:

https://brainly.com/question/30259945

#SPJ4

Answer: 14x + 10

Step-by-step explanation: The perimeter of the room without the door can be found by adding up the lengths of all four sides:

Perimeter = 2(4x-1) + 2(3x+6)

Simplifying and combining like terms, we get:

Perimeter = 14x + 10

Therefore, the perimeter of the room without the door in simplest form is 14x + 10.

0 is a 100% decrease of 98.7. Hope this helped!

Answer:33

Step-by-step explanation:45-12=33

First, note that the degree of the polynomial is the highest power of x that appears in the expression. In this case, the degree is max(n, 5, m, 2).

Next, consider the leading coefficient of the polynomial, which is the coefficient of the term with the highest power of x. In this case, the leading coefficient is a.

Based on this information, here are some possible general shapes of the graph of y=f(x):

If n is even and a > 0, the graph of y=f(x) looks like a "U" shape, with both ends pointing upwards.

If n is even and a < 0, the graph of y=f(x) looks like an upside-down "U", with both ends pointing downwards.

If n is odd and a > 0, the graph of y=f(x) looks like a "v" shape, with the vertex pointing upwards.

If n is odd and a < 0, the graph of y=f(x) looks like an upside-down "v", with the vertex pointing downwards.

Note that these are just general shapes, and the actual graph could be modified by the other terms in the polynomial. Additionally, the values of b, c, d, and the constants could also affect the shape and behavior of the graph.

To know more about graph visit:

https://brainly.com/question/17267403

#SPJ9

Complete Question is : let f(x)=ax^n+bx^5+36/cx^m-dx^2+9 where m and n are integers and a,b,c and d are unknown constants. what is the possible graph of the function?

Answer:

3

Step-by-step explanation:

Number of people in the choir = 80

Number of women = half of 80 = 40

Number of men in the choir is ¼ of the women = 40/4 = 10

Number of men plus women = 10 +40 = 50

Number of children = 80 - 50 = 30

Ratio of children to men = n:1 = 30:10

Divide both sides by 10

30:10 = 3:1

n = 3

The standard deviation for the number of people with the genetic mutation in a group of 1000 individuals is approximately 4.89.

To find the standard deviation for the number of people with a particular genetic mutation in a group of 1000 individuals, we first need to understand the concept of binomial distribution.

Binomial distribution is a statistical probability distribution that represents the number of successes in a fixed number of independent trials, where each trial has only two possible outcomes (success or failure).

In this case, the probability of success (having the genetic mutation) is 0.04, and the probability of failure (not having the mutation) is 0.96. Thus, we can model the number of people with the mutation in a group of 1000 individuals using a binomial distribution with n = 1000 and p = 0.04.

The formula for the standard deviation of a binomial distribution is:

σ = √(np(1-p))

Where σ is the standard deviation, n is the number of trials, and p is the probability of success. Plugging in the values, we get:

σ = √(1000 x 0.04 x 0.96) = 4.89

In other words, we can expect that the number of people with the genetic mutation in a group of 1000 individuals will vary around the mean of 40 (1000 x 0.04) by about 4.89, with about 68% of the observations falling within one standard deviation of the mean.

To learn more about standard deviation click on,

https://brainly.com/question/13802447

#SPJ4

the expected gain is $0.77, rounded to the nearest cent.The expected gain is the sum of the products of the probability of each outcome and its corresponding payoff.

There are 4 jacks, 4 queens, 4 kings, and 4 aces in a standard 52-card deck. So the probability of drawing a jack or a queen is 8/52 = 2/13, and the probability of drawing a king or an ace is also 8/52 = 2/13. The probability of drawing any other card is 1 - 2/13 - 2/13 = 9/13.

The expected gain is the sum of the products of the probability of each outcome and its corresponding payoff. So:

Expected gain = (2/13) * 19 + (2/13) * 5 + (9/13) * (-2)

Expected gain = 38/13 - 10/13 - 18/13

Expected gain = 10/13 ≈ 0.77

Therefore, the expected gain is $0.77, rounded to the nearest cent.

Learn more about probability here

https://brainly.com/question/11234923

#SPJ4

The two numbers are 6 and 2.

Let's assume the first number is x and the second number is y.

From the first statement, we can write the equation x = y + 4.

From the second statement, we can write the equation 2x = 4y + 2.

Now, we can substitute x in terms of y from the first equation into the second equation:

2(y + 4) = 4y + 2

Simplifying this equation, we get:

2y + 8 = 4y + 2

2y = 6

y = 3

Substituting y = 3 in the first equation, we get:

x = y + 4 = 3 + 4 = 7

Therefore, 6 and 2 are the two numbers,


To know more about equations refer here:

https://brainly.com/question/29657983#

#SPJ11