Answer: If a sample has 50 atoms of 87Rb and 50 atoms of Sr, it has gone through the equivalent of 77.7 billion years in half-lives.
In order to answer this question, we need to know the half-lives of both 87Rb and Sr. The half-life of 87Rb is 48.8 billion years and the half-life of Sr is 28.9 billion years.
Therefore, the sample has gone through the equivalent of (50/50) x 48.8 billion years, or 48.8 billion years, of 87Rb's half-life.
It has also gone through (50/50) x 28.9 billion years, or 28.9 billion years, of Sr's half-life. In total, the sample has gone through the equivalent of 77.7 billion years in half-lives.
In summary, if a sample has 50 atoms of 87Rb and 50 atoms of Sr, it has gone through the equivalent of 77.7 billion years in half-lives.
Learn more about half lives here:
https://brainly.com/question/30599798#
#SPJ11
Help please i need help on this
Answer:This chemical reaction is a double replacement reaction.
Explanation:
Answer:
A-Double replacement
Explanation:
Hope this helps
The equilibrium constant for a reaction is greater than 1.0 at temperatures above 500 K but less than 1.0 at
temperatures below 500 K. What can be concluded about the values of AH and AS for the reaction? (Assume
that AH and AS are independent of temperature.)
(A) AH> 0 and AS > 0
(B) AH> 0 and AS < 0
(C) AH < 0 and AS > 0
(D) AH <0 and AS < 0
Answer:
(C) AH < 0 and AS > 0
When the equilibrium constant is greater than 1.0 at higher temperatures, it indicates that the reaction is exothermic (AH < 0) and that the entropy change (AS) is positive. At lower temperatures, the equilibrium constant is less than 1.0, indicating that the reaction is endothermic (AH > 0) and that the entropy change (AS) is negative. Therefore, the correct answer is (C) AH < 0 and AS > 0.
Based on the given information, we can conclude that AH <0 and AS > 0. Therefore, option C is correct.
What is equilibrium constant ?The equilibrium constant (K) for a reaction can be expressed in terms of the standard free energy change (∆G°), standard enthalpy change (∆H°), and standard entropy change (∆S°) as follows:
K = e^(-∆G°/RT) = e^(-∆H°/RT) * e^(∆S°/R)
where R is the gas constant and T is the temperature in Kelvin.
If the equilibrium constant is greater than 1 at temperatures above 500 K, then ∆G° must be negative at those temperatures.
This means that the reaction is exergonic (releases energy) and favors the formation of products over reactants. Since ∆G° = ∆H° - T∆S°, it follows that ∆H° must be negative and/or ∆S° must be positive.
On the other hand, if the equilibrium constant is less than 1 at temperatures below 500 K, then ∆G° must be positive at those temperatures.
This means that the reaction is endergonic (requires energy) and favors the formation of reactants over products. Again, using ∆G° = ∆H° - T∆S°, we can conclude that ∆H° must be positive and/or ∆S° must be negative.
Therefore, based on the given information, we can conclude that AH <0 and AS > 0. The negative ∆H° at higher temperatures drives the reaction towards product formation, while the positive ∆S° at higher temperatures increases the entropy and randomness of the system, also favoring product formation.
Find more on equilibrium constant:
https://brainly.com/question/10038290
#SPJ2
Wood will dissolve in water.
True
False
i will give brainllist
Answer:
False, it only rots
Explanation:
Answer: The answer is false
We know that wood is insoluble as trees take in water through roots into the trunk. Therefore, water is insoluble in water. Note: Polymers are defined as materials that consist of repeating large molecules.
Explanation: Hope this helps!! :)) Have a great spring break!!
Mark me brainliest!! :))
write the balanced chemical equation for the gas-phase production of ammonia from elemental nitrogen and hydrogen
The balanced chemical equation for the gas-phase production of ammonia from elemental nitrogen and hydrogen is:
N2 + 3H2 → 2NH3
This equation represents the reaction of nitrogen molecules, N2, with hydrogen molecules, H2, to form ammonia molecules, NH3. This reaction occurs when nitrogen and hydrogen gases are combined in a 1:3 ratio, in other words, one nitrogen molecule reacts with three hydrogen molecules to produce two ammonia molecules. This reaction is endothermic, meaning energy must be supplied for it to occur.
In general, this reaction is carried out at high temperatures and pressures, often at around 400-600°C and up to 200atm. A catalyst is usually also used, usually iron, to speed up the reaction. In the presence of a catalyst, the reaction rate can increase by a factor of thousands compared to a reaction without a catalyst.
Overall, the balanced chemical equation for the gas-phase production of ammonia from elemental nitrogen and hydrogen is:
N2 + 3H2 → 2NH3
To know more about catalyst click on below link :
https://brainly.com/question/24430084#
#SPJ11
For the incomplete Reaction (below), the mass of the missing product should be...
) -1
) 0
) 1
) 10
For the incomplete Reaction (below), the charge of the missing product should be...
) -1
) 0
) 1
) 10
For the incomplete Reaction (still below) the missing particle is called...
- an alpha particle
- a beta particle
- a gamma emission
- a neutron
For the incomplete Reaction (wow, still below), to occur which of the following occurred?
- a neutron in the carbon nucleus split into a proton and an electron that was released
- an electron was released fro orbit around the carbon atom's nucleus
- energy from the carbon atom's nucleus became an electron
- an electron was absorbed b the carbon atom's nucleus
For the incomplete Reaction (below), the mass and charge of the missing product are 0 and -1. The missing product is a beta particle where a neutron in the carbon nucleus split into a proton and an electron that was released.
What is beta particle emission?Beta particle emission, also known as beta decay, is a type of radioactive decay in which a beta particle is emitted from the nucleus of an atom.
A beta particle is a high-energy, high-speed electron or positron that is released from the nucleus as a result of the transformation of a neutron into a proton or a proton into a neutron.
Learn more about beta particles at: https://brainly.com/question/24312947
#SPJ1
write an equation showing how the mass of the substance sought can be derived from the mass of the weighed substance on the right.
What is the key bond being formed in a Grignard reaction? A. Carbon-Magnesium B. Magnesium-Bromine
C. Carbon-Carbon D. Carbon-Oxygen
Answer:
carbon-magnesium
Explanation:
H3C - Mg - Br
what is the ph of a solution that is prepared by mixing 100 ml of 0.20 m hcl with 200 ml of 0.10 m naoh
Answer: The pH of the solution is 1.44.
Explanation:
The given solution is a mixture of 100 mL of 0.20 M HCl and 200 mL of 0.10 M NaOH. Since NaCl is a neutral salt, it does not contribute to the concentration of H+ or OH-. The concentration of OH- can be calculated from the concentration of NaOH that was added, which is 0 M. Substituting the concentration of OH- into the equation for [H+], [H+] is found to be infinity which is not physically possible. Therefore, the pH of the solution is calculated using the equation pH = -log[H+], which gives a value of 1.44.
how much water do you need to add to 10 ml of a solution of hcl with a ph of 2 to change the ph to 4?
NaOH is a strong base and completely dissociates in water. The number of moles of NaOH will be equal to the number of moles of H+ ions neutralized. Hence, 99 ml of NaOH must be added.
It measures the acidity or basicity of a solution on a scale of 0 to 14. A pH of 7 is neutral, and anything below 7 is acidic, and anything above 7 is basic.
When pH is increased or decreased by one unit, it means a ten-fold decrease or increase in hydrogen ion concentration in a solution.Acid and base are two essential terms to learn here.
An acid is a chemical compound that donates H+ ions in a solution, whereas a base is a chemical compound that accepts H+ ions. These H+ ions determine the acidity of the solution.
The more H+ ions a solution has, the more acidic it is, and the fewer H+ ions a solution has, the more basic it is. A pH of 2 indicates that the solution is highly acidic.
To change the pH of the given solution from 2 to 4, we need to make the solution less acidic, which means we need to add a base to it.
Let the volume of the base we need to add be x ml.The pH of the new solution will be 4. We can write the pH equation as pH = -log[H+], where [H+] represents the concentration of H+ ions.
The concentration of H+ ions in the initial solution is:2 = -log[H+]. Hence, [H+] = 0.01 M.The concentration of H+ ions in the final solution is:4 = -log[H+].
Hence, [H+] = 0.0001 M.We know that[H+] = Acid concentration = Base concentration.Hence, the concentration of NaOH added to the solution will be 0.01 M - 0.0001 M = 0.0099 M.
NaOH is a strong base and completely dissociates in water. So, the number of moles of NaOH will be equal to the number of moles of H+ ions neutralized.
The volume of NaOH needed to achieve this concentration:0.0099 mol/L = n NaOH / V NaOHn NaOH = 0.0099 mol/L x (10 mL + x) = 0.099 molV NaOH = n NaOH / 0.1 mol/L = (0.0099 mol) / (0.1 mol/L) = 0.099 L = 99 ml
Hence, 99 ml of NaOH must be added to 10 ml of a solution of HCl with a pH of 2 to change the pH to 4.
to know more about neutralized refer here:
https://brainly.com/question/27891712#
#SPJ11
What product is formed when the compound is treated with Tollens reagent (Ag2O,NH4OH) ? With some compounds, no reaction occurs. If no reaction occurs, draw the reactant.
The product that will be formed by the oxidation using Ag2O,NH4OH is CH3(CH2)4COOH.
How are primary alcohols oxidized using Ag2O?Primary alcohols can be oxidized to aldehydes or carboxylic acids using silver(I) oxide (Ag2O) as an oxidizing agent in the presence of water (H2O) and heat. The reaction proceeds as follows:
RCH2OH + [O] → RCHO + H2O (aldehyde formation)
or
RCH2OH + 2[O] → RCOOH + H2O (carboxylic acid formation)
where R is an alkyl group.
In this reaction, the silver(I) oxide acts as a source of oxygen, which is required for the oxidation of the alcohol. The oxygen is transferred to the alcohol, forming a carbonyl group (C=O) in the aldehyde or carboxylic acid product.
Learn more about alcohols:https://brainly.com/question/30829120
#SPJ1
what might be a source of octane in the product mixture in this reaction? hint: you did quench the hydroboration reaction with water and let the mixture sit for a week before proceeding to the oxidation step.
Answer: The aldehyde or ketone undergoes hydrolysis and forms an alkane, which is the source of octane in the product mixture of this reaction.
The source of octane in the product mixture of this reaction is the hydroboration reaction. This reaction involves the addition of a boron hydride, such as BH3, to an alkene in the presence of a hydrocarbon solvent.
The addition of boron hydride creates a boron-alkyl species, which then reacts with water and is converted into an alcohol. The alcohol then undergoes oxidation and forms an aldehyde or a ketone, depending on the conditions. The aldehyde or ketone then undergoes hydrolysis and forms an alkane, which is the source of octane.
To summarize, the hydroboration reaction of an alkene in the presence of a hydrocarbon solvent produces an alcohol. The alcohol then undergoes oxidation and forms an aldehyde or a ketone, depending on the conditions. The aldehyde or ketone then undergoes hydrolysis and forms an alkane, which is the source of octane in the product mixture of this reaction.
Learn more about hydrolysis here:
https://brainly.com/question/24213349#
#SPJ11
11. for a molecule with two atoms, what is the electronegativity difference when there is no bond dipole?
Answer: A molecule with two atoms, the electronegativity difference when there is no bond dipole is zero.
This is because there is no bond dipole when there is no difference in the electronegativity of the two atoms forming the molecule.
What is Electronegativity?The ability of an atom to draw electrons towards itself in a molecule is known as electronegativity. Electronegativity can be used to predict the formation of bonds between atoms. A difference in electronegativity between two atoms determines the type of bond formed. T
he greater the difference in electronegativity, the greater the bond polarity. This results in a partial positive charge on the atom with lower electronegativity and a partial negative charge on the atom with higher electronegativity. Bond Dipole in a polar molecule, the electrons spend more time around the atom with the greater electronegativity.
This results in a partial negative charge on this atom and a partial positive charge on the other atom. The separation of these partial charges produces a dipole known as a bond dipole. When two atoms in a molecule have the same electronegativity, the bond is non-polar and there is no bond dipole.
Learn more about electronegativity here:
https://brainly.com/question/17762711#
#SPJ11
adding this test solution will precipitate sulfate ions: select one: a. naoh b. bacl2 c. hno3 d. nh4cl
Answer: The solution that will precipitate sulfate ions is B. BaCl2.
How do you test for sulfate ions?
The most reliable test for sulfate ions is to add a few drops of barium chloride to the test solution. If sulfate ions are present, they will combine with the barium ions to create a white precipitate of barium sulfate.
In the presence of barium ions, sulfuric acid is added to the test solution to look for the sulfate ions that are there. A white precipitate of barium sulfate is formed as a result of the reaction.
The production of a white precipitate of barium sulfate means that sulfate ions are present. In order to eliminate carbonates and other anions, the test solution should be treated with a few drops of dilute hydrochloric acid before testing.
Learn more about Barium chloride here:
https://brainly.com/question/14444265#
#SPJ11
sulfuric acid is a strong diprotic acid that readily gives up both of its protons. assuming it completely dissociates, how many moles of h does one get from 16 milliliters of 3.0 molar aqueous sulfuric acid?
Number of moles of H+ ions = 2 x 0.048 moles = 0.096 moles. Therefore, 16 ml of 3.0 M sulfuric acid solution contains 0.096 moles of H+ ions.
Sulfuric acid is a strong diprotic acid that readily gives up both of its protons. Assuming it completely dissociates. The concentration of a solution is defined as the amount of solute present in a particular amount of solvent. Molarity is a measure of concentration that is defined as the number of moles of solute present in one liter of the solution, i.e. mol/L.So, the given sulfuric acid solution has a concentration of 3.0 M.
It means that in every liter of the solution, there are 3.0 moles of sulfuric acid. To find out how many moles of H+ ions are present in 16 ml of 3.0 M sulfuric acid solution, we can follow these steps: 1. Convert the volume of the solution from milliliters to liters.1 ml = 1/1000 L16 ml = 16/1000 L = 0.016 L2. Calculate the number of moles of sulfuric acid present in 16 ml of 3.0 M sulfuric acid solution.
Number of moles = Molarity x Volume in liters Number of moles of H2SO4 = 3.0 M x 0.016 L = 0.048 moles3. Sulfuric acid is a diprotic acid, which means it has two protons that can dissociate. So, the number of moles of H+ ions produced will be double the number of moles of H2SO4 present.
Know more about Sulfuric acid here:
https://brainly.com/question/30039513
#SPJ11
1. personal connections describe your reaction to the events in act i. why might you want to continue reading? explain.
Readers may want to continue reading a work if they are intrigued by the characters, interested in the plot, or invested in the themes and messages presented.
Why will a reader continue reading?
In general, act sets the stage for the rest of the work, introducing key characters, establishing conflicts, and setting the tone and mood.
If a reader finds these elements compelling or engaging, they may be motivated to continue reading to see how the story unfolds and how the characters develop. Additionally, Act I may introduce questions or mysteries that pique the reader's curiosity and encourage them to keep reading to find the answers.
Thus, a reader may want to continue reading a work if they are in interested in the plot.
Learn more about reading here: https://brainly.com/question/24716030
#SPJ1
the concentration of stomach acid, hcl, is approximately 0.10 m. what volume of stomach acid contains 0.00025 g of hcl?
The volume of stomach acid containing 0.00025 g of HCl is 6.85 µL.
This is calculated by dividing 0.00025 g by the concentration of HCl (0.10 M).
The concentration of stomach acid, HCl = 0.10 M
The mass of HCl = 0.00025 g
To find: Volume of stomach acid contains 0.00025 g of HCl.
Solution: We know,
Molarity (M) = (moles of solute) / (volume of solution in liters)
The molar mass of HCl = (1 × atomic mass of H) + (1 × atomic mass of Cl)= (1 × 1.01) + (1 × 35.5)= 36.51 g/mol
Given, Molarity (M) = 0.10 M
From the Molarity formula, we can detect
Number of moles of HCl = Molarity (M) × volume (V)
moles of HCl = 0.00025 g / 36.51 g/mol = 0.10 M × V
0.10 V = (0.00025 / 36.51) g / mol
V = (0.00025 / 36.51) g / (0.10 mol/L)
V = 6.85 × 10^-6 L = 6.85 µL
Thus, the volume of stomach acid that contains 0.00025 g of HCl is 6.85 µL.
To know more about Molarity calculations, refer here:
https://brainly.com/question/11348490#
#SPJ11
how would your calculations of the concentration of [fescn]2 been affected if the cuvette you used had a 1.5 cm path length rather than the 1.0 cm value you were told to use?
The increased distance across the cell will result in an increase absorbance reading.
The concentration of [tex][Fescn]_2[/tex] would be affected if the cuvette had a 1.5 cm path length rather than the 1.0 cm value used.Since the absorbance of a sample is proportional to the concentration of a sample (as described by the Beer-Lambert law), increasing the path length of the cuvette would result in a decrease in absorbance. This means that the concentration of the sample would be lower than if the 1 cm path length was used. In other words, the concentration of [tex][Fescn]_2[/tex]would be lower if the cuvette had a 1.5 cm path length than if it had a 1.0 cm path length.
learn more about cuvette Refer:brainly.com/question/29385690
#SPJ1
when 0.0400 mol koh is added to 1.0 l of a solution that is 0.25 m in nh3 and 0.20 m in nh4no3, the ph increases only slightly. which statement best explains this? g
When 0.0400 mol KOH is added to 1.0 L of a solution that is 0.25 M in NH3 and 0.20 M in NH4NO3, the pH increases only slightly.
The statement that best explains this is that the weak acid (NH4+) will combine with OH- to create a weak base (NH3). Explanation: NH3(aq) + H2O(l) ⇌ NH4+(aq) + OH–(aq)The ammonium ion (NH4+) acts as a weak acid that combines with hydroxide ion (OH–) to form ammonia (NH3) and water (H2O).
It is important to remember that ammonia is not strong enough to raise the pH significantly and that ammonium is a weak acid that won't produce a lot of hydroxides. Therefore, the pH change will be negligible. The explanation for the above reaction is as follows: NH4+ + OH– ⇌ NH3 + H2O In this equilibrium, the weak acid (NH4+) will combine with OH– to create a weak base (NH3), resulting in the pH not rising significantly.
You can read more about molarity at https://brainly.com/question/30404105#:
#SPJ11
a solution made up of 40% alcohol by volume is mixed with 4 liters of solution that is 10% alcohol by volume. how much, in liters, of the 40% alcoholic solution is needed to make a mixture that is 25% alcohol by volume?
The volume, in liters, of the 40% alcoholic solution needed to make a mixture that is 25% alcohol by volume is 4 L.
To find the amount of 40% alcoholic solution needed to make a mixture that is 25% alcohol by volume, we need to use the following formula:
C₁V₁ + C₂V₂ = CfVf
where C₁ is the concentration of the first solution, V₁ is the volume of the first solution, C₂ is the concentration of the second solution, V₂ is the volume of the second solution, Cf is the desired concentration of the resulting mixture, and Vf is the volume of the resulting mixture.
In this case, we know the first solution is 40% alcohol by volume and the second solution 10% alcoholic by volume, and we need to make a mixture that is 25% alcoholic by volume. We need to know the volume of the first solution, V₁.
Plugging in the values, we get:
C₁V₁ + C₂V₂ = CfVf
0.40V₁ + (0.10)(4) = (0.25)(4 + V₁ )
Solving for the value of V₁, we get:
0.40V₁ + 0.40 = 1 + 0.25V₁
0.15V₁ = 0.60
V₁ = 4
Therefore, 4 liters of the first solution is needed.
Learn more about mixture here: https://brainly.com/question/11868977
#SPJ11
g a first-order reaction has a half-life of 23.1 s. how long does it take for the concentration of the reactant in the reaction to fall to one-sixteenth of its initial value?
Answer: It takes 92.4 s for the concentration of the reactant in the reaction to fall to one-sixteenth of its initial value.
The first-order reaction has a half-life of 23.1 s, which means that it takes 23.1 s for the concentration of the reactant to decrease to half of its initial value. Since the concentration needs to be reduced to one-sixteenth of its initial value, it will take four half-lives of the reaction, or 92.4 s in total.
This can be mathematically shown using the formula of a first-order reaction:
[A]t = [A]0 X e^(-kt)
Where:
[A]t is the concentration of the reactant at time t
[A]0 is the initial concentration of the reactant
k is the rate constant of the reaction
To calculate the time required for the concentration to fall to one-sixteenth of its initial value, the equation can be rearranged as:
t = -(1/k)ln([A]t/[A]0)
By substituting the values of the half-life, initial concentration, and the desired concentration, we can calculate the time required for the concentration of the reactant to reduce to one-sixteenth of its initial value.
Therefore, it takes 92.4 s for the concentration of the reactant in the reaction to fall to one-sixteenth of its initial value.
Learn more about concentration here:
https://brainly.com/question/10725862#
#SPJ11
based on results presented in the passage, researchers hoping to alter the appearance of sgbp while maintaining its function as a cp providing a colored appearance would most logically choose to mutate which sgbp residue?
The nucleotide sequence of an organism's genome, that of a virus, extrachromosomal DNA, or other genetic components can change permanently in a process known as mutation.
Any alteration to a cell's DNA sequence. Mistakes in cell division can result in mutations, as can exposure to environmental DNA-damaging substances.
Gene mutations can be divided into two categories: small-scale mutations and large-scale mutations.
Appearance Alteration is the capacity to modify another person's skin, hair, and vocal chords (also known as adaptive appearance manifestation).
The genes that encode our pigment's sensitivity to color can multiply themselves throughout time. The additional copies are susceptible to mutations that change the range of wavelengths they can absorb.
To know about function https://brainly.com/question/11624077
#SPJ4
the atomic electron configuration inflluences the resulting mechanical properties of the material true false
The statement "the atomic electron configuration influences the resulting mechanical properties of the material" is TRUE. The way the electrons are arranged in the atom affects the way atoms interact with each other through forces such as Van der Waals forces.
An atom's electron configuration is a representation of the electrons' position within the atom's energy levels or shells. The quantity of electrons in an atom's outermost shell affects the atom's reactivity or chemical properties. As a result, the atomic electron configuration has an impact on the resulting mechanical properties of the material.
How does atomic electron configuration influence the mechanical properties of materials?
The atomic electron configuration influences the mechanical properties of materials in the following ways:
Brittleness or ductility: Brittle materials are more fragile and break more easily than ductile materials, which are more pliable and less prone to break. The distance between the electrons in the outer shell has an impact on the ductility of a material.Malleability: The ability to deform a material without fracturing it is referred to as malleability. The malleability of a material is influenced by its electron configuration, particularly the number of electrons in the outermost shell.Elasticity: The capacity of a material to return to its original shape after being deformed is referred to as elasticity. The atomic electron configuration, particularly the number of electrons in the outer shell, affects the material's elasticity. The more electrons there are, the greater the material's elasticity.For more questions related to atomic electron configuration .
https://brainly.com/question/29757010
#SPJ11
which species is diamagnetic? which species is diamagnetic? si s i co3 c o 3 ba2 b a 2 ni3 n i 3
Answer: Out of the given species, the diamagnetic species are: Si, Ba2+ as they have all their electrons paired in their orbitals, so there are no unpaired electrons to get attracted by an external magnetic field.
Explanation:
Diamagnetism and Paramagnetism are two of the types of magnetism that exist in nature. Diamagnetism arises from a material's electrons' orbital motion in conjunction with one another, causing the magnetic field to cancel.
Diamagnetic materials have a weak, negative magnetic susceptibility, and they experience a repulsive force when in a magnetic field.Paramagnetic materials have a positive magnetic susceptibility, and they get weakly magnetized when exposed to a magnetic field.
The paramagnetism in these materials results from the presence of unpaired electrons in their orbitals.
Therefore, out of the given species, the diamagnetic species are: Si, Ba2+ as they have all their electrons paired in their orbitals, so there are no unpaired electrons to get attracted by an external magnetic field.
Learn more about diamagnetism here:
https://brainly.com/question/15462756#
#SPJ11
Which of the following best explains why doubling the temperature of a gas in a closed container caused the pressure to be doubled?
The correct option is: Increasing the temperature increases the frequency and force of collisions between gas molecules and the container walls, causing the pressure to increase.
What happens when temperature of a gas increasedWhen the temperature of a gas in a closed container is increased, the gas molecules gain kinetic energy and move faster, colliding with the container walls more frequently and with greater force.
According to the kinetic theory of gases, the pressure of a gas is directly proportional to the frequency and force of collisions between gas molecules and the container walls.
Therefore, doubling the temperature of a gas in a closed container would also double the pressure of the gas.
Learn more about gas laws at:
https://brainly.com/question/25290815
#SPJ1
8. A catalyst lowers the amount of
activation energy needed to get
a reaction started. What do you
think the diagram would look
like if a catalyst were added?
if a drug has a concentration of 275 mg per 10 ml, how many ml are needed to give 1 gram of the drug?
We require 36.36 milliliters of the drug solution to provide 1 gram of the drug.
A drug has a concentration of 275 mg per 10 ml. We have, volume of solution = mass of solute/concentration.
The mass of the solute (drug) is 1 gram or 1000 mg. Concentration is 275 mg/10 ml, which can be simplified to 27.5 mg/ml.
Volume of solution = mass of solute/concentration= 1000 mg/27.5 mg/ml= 36.36 ml. Therefore, we require 36.36 milliliters of the drug solution to provide 1 gram of the drug.
We can determine the required volume of a solution if we know the concentration of the solute and the mass of the solute to be delivered by using the formula volume of solution = mass of solute/concentration.
to know more about solution refer here:
https://brainly.com/question/30665317#
#SPJ11
41.8 moles of sulfur is equal to how many atoms of
sulfur?
How many grams of CaSO4 would be produced if 200 grams of Fe2O3 reacted
As a result, we would anticipate 487.49 grams of Calcium sulfate to result from a reaction between 200 grams of Iron and Calcium sulfate.
How many kilos does one molecule weigh?Number-wise, the mass of one mole (or formula unit) in atomic mass units is equal to the mass of one mole (or formula unit) in grams. One mole of Oxygen molecules, for instance, weighs 32.00 g and a single Oxygen molecule, 32.00 u.
We can use the following chemical equation, assuming you meant to inquire about the interaction between Iron and Calcium sulfate:
Iron + Calcium sulfate → Ferrous sulfate + Calcium
These numbers can be used to determine how many moles of iron there are in 200 grams:
200 g Iron × (1 mol Iron / 55.85 g Iron) = 3.58 mol Iron
We can infer that 3.58 moles of Calcium sulfate would be formed in this reaction because the stoichiometric ratio of Iron to Calcium sulfate is 1:1.
We can use the following equation to determine the mass of Calcium sulfate generated:
Mass of Calcium sulfate= number of moles of Calcium sulfate× molar mass of Calcium sulfate
Mass of Calcium sulfate = 3.58 mol Calcium sulfate × 136.14 g/mol
Mass of Calcium sulfate = 487.49 g
To know more about molecules visit:-
https://brainly.com/question/1446104
#SPJ9
a 15.0 ml sample of 0.20 m hbr is titrated with 0.20 m naoh. what volume of titrant must be added to reach the equivalence point (recall the definition of equivalence point)? enter your response in milliliters (ml) to the nearest 1 ml.
The volume of titrant needed to reach the equivalence point is 15 mL.
The equivalence point is the point in a titration when an equal number of moles of acid and base have been mixed together, resulting in a neutral solution.
To calculate the volume of titrant required to reach the equivalence point, you first need to calculate the number of moles of acid in the sample. This can be done using the formula:
moles of acid = (concentration of acid)(volume of acid). In this case, the number of moles of acid is (0.20 M)(15.0 mL) = 3.0 moles.
Next, calculate the number of moles of base needed to reach the equivalence point. Consider the balanced chemical reaction between the acid and the base. Since there is an equal number of each element in the reactants and products of HBr + NaOH ⇒ NaBr + H₂O, then 1 mole of HBr will require 1 mole of NaOH. Hence, moles of base = moles of acid. In this case, 3.0 moles of base are needed.
Finally, you need to calculate the volume of base needed to reach the equivalence point. This can be done using the formula:
volume of base = (moles of base)(volume of titrant). In this case, the volume of titrant needed is (3.0 moles)/(0.20 M) = 15 mL.
Therefore, to the nearest 1 mL, the volume of titrant needed to reach the equivalence point is 15 mL.
Learn more about equivalence point here: https://brainly.com/question/23502649.
#SPJ11
PLEASE HELPPPP asapppppppppp