Taking into account definition of percent yield, the correct answer is option c): the percent yield for the reaction is 0.947.
Reaction stoichiometryIn first place, the balanced reaction is:
CH₄ + 2 O₂ → CO₂ + 2 H₂O
By reaction stoichiometry, the following amounts of moles of each compound participate in the reaction:
CH₄: 1 moleO₂: 2 molesCO₂: 1 moleH₂O: 2 molesThe molar mass of the compounds is:
CH₄: 16.05 g/moleO₂: 32 g/moleCO₂: 44.01 g/moleH₂O: 18.02 g/moleBy reaction stoichiometry, the following mass quantities of each compound participate in the reaction:
CH₄: 1 mole ×16.05 g/mole= 16.05 gramsO₂: 2 moles ×32 g/mole= 64 gramsCO₂: 1 mole ×44.01 g/mole= 44.01 gramsH₂O: 2 moles×18.02 g/mole= 36.04 gramsMass of CO₂ formedThe following rule of three can be applied: if by reaction stoichiometry 16.05 grams of CH₄ form 44.01 grams of CO₂, 136 grams of CH₄ form how much mass of CO₂?
mass of CO₂= (136 grams of CH₄× 44.01 grams of CO₂)÷16.05 grams of CH₄
mass of CO₂= 372.92 grams
Then, 372.92 grams of CO₂ can be produced from 136 grams of CH₄.
Percent yieldThe percent yield is the ratio of the actual return to the theoretical return expressed as a percentage and this is calculated as the experimental yield divided by the theoretical yield multiplied by 100%:
percent yield= (actual yield÷ theoretical yield)× 100%
where the theoretical yield is the amount of product acquired through the complete conversion of all reagents in the final product.
Percent yield for the reaction in this caseIn this case, you know:
actual yield= 353 gramstheorical yield= 372.92 gramsReplacing in the definition of percent yield:
percent yield= (353 grams÷ 372.92 grams)× 100%
Solving:
percent yield= 94.7%= 0.947
Finally, the percent yield for the reaction is 0.947.
Learn more about percent yield:
brainly.com/question/14408642
#SPJ1
In the Periodic Table below, shade all the elements for which the neutral atom has an outer electron configuration of ms2nd2, where n and m are integers, and =m+n1.
The elements that have an outer electron configuration of ms2nd2 are located in the d-block of the periodic table and include some of the transition metals and lanthanides.
What is the periodic table?To determine which elements in the periodic table have this outer electron configuration, you can look at the position of the d-block elements in the table. The d-block elements are located in the middle of the table and include the transition metals. These elements have partially filled d orbitals, which can accommodate up to 10 electrons.
Elements in the d-block with an atomic number of 21 through 30 (scandium through zinc) have an outer electron configuration of d10s2 and do not fit the ms2nd2 configuration. However, elements in the d-block with an atomic number of 39 through 48 (yttrium through cadmium) have an outer electron configuration of d10s2p1 and can have the ms2nd2 configuration by removing the single electron in the p orbital. Elements in the d-block with an atomic number of 57 through 80 (lanthanum through mercury) also have the possibility of having an outer electron configuration of ms2nd2.
Learn more about periodic table:https://brainly.com/question/11155928
#SPJ1
pls help!!!
a compound is found to be 51.39% carbon, 8.64% hydrogen, and 39.97% nitrogen. it has a molecular molar mass of 140.22 g/mol. what is the molecular formula.
show work pls!!
The molecular formula of the compound, given that it contains 51.39% carbon, 8.64% hydrogen, and 39.97% nitrogen is C₆H₁₂N₄
How do i determine the molecular formula?To obtain the molecular formula, we must first determine the empirical formula. Details on how to obtain the empirical formula is given beloww:
Carbon (C) = 51.39%Hydrogen (H) = 8.64%Nitrogen (N) = 39.97%Empirical formula =?Divide by their molar mass
C = 51.39 / 12 = 4.283
H = 8.64 / 1 = 8.64
N = 39.97 / 14 = 2.855
Divide by the smallest
C = 4.283 / 2.855 = 1.5
H = 8.64 / 2.855 = 3
N = 2.855 / 2.855 = 1
Multiply through by 2 to express in whole number
C = 1.5 × 2 = 3
H = 3 × 2 = 6
N = 1 × 2 = 2
Thus, we can conclude that the empirical formula is C₃H₆N₂
Finally, we shall determine the molecular formula. Details below
Empirical formula = C₃H₆N₂Molar mass of compound = 140.22 g/molMolecular formula =?Molecular formula = empirical × n = mass number
[C₃H₆N₂]n = 140.22
[(12×3) + (1×6) + (14×2)]n = 140.22
70n = 140.22
Divide both sides by 70
n = 140.22 / 70
n = 2
Molecular formula = [C₃H₆N₂]n
Molecular formula = [C₃H₆N₂]₂
Molecular formula = C₆H₁₂N₄
Learn more about molecular formula:
https://brainly.com/question/21568927
#SPJ1
Lattice energy is an estimate of the bond
Answer:
strength in ionic compounds.
Explanation:
:)
Lattice energy is an estimate of the bond of strength. It denotes the amount of energy required to break down one mole of a solid ionic compound into its constituent gaseous ions.
What does the lattice energy represent?The strength of an ionic compound's ionic bonds is measured by lattice energy. It explains several properties of ionic solids, including their volatility, solubility, and hardness. An ionic solid's lattice energy cannot be measured directly.
How does lattice energy influence ionic compound solubility in water?The higher an ionic compound's lattice energy, the more difficult it is to disassemble the crystal lattice structure and dissolve it in water. As a result, compounds with high lattice energies are less soluble in water than those with low lattice energies.
What factors influence lattice energy?The value of lattice energy is determined by the charges on the two ions as well as the distance between them. The distance between the ions is directly proportional to their size.
To know more about Lattice Energy visit:
https://brainly.com/question/20590677
#SPJ1
Complete question:
Lattice energy is an estimated bond of the bond:
A. conductivity
B. group
C. length
D. strength
Choose the correct option.
Liquid octane CH3CH26CH3 will react with gaseous oxygen O2 to produce gaseous carbon dioxide CO2 and gaseous water H2O. Suppose 6.9 g of octane is mixed with 42.2 g of oxygen. Calculate the maximum mass of carbon dioxide that could be produced by the chemical reaction. Round your answer to 2 significant digits.
The maximum mass of carbon dioxide that could be produced from 6.9 g of octane and 42.2 g of oxygen is 21.3 g, rounded to 2 significant digits.
What is Octane?
Octane is a hydrocarbon with the chemical formula [tex]C_{8} H_{18}[/tex] It is an organic compound belonging to the alkane group, which means it consists of only carbon (C) and hydrogen (H) atoms bonded together by single covalent bonds. Octane is a colorless liquid with a molecular weight of approximately 114 g/mol and is commonly used as a component in gasoline or fuel for internal combustion engines.
From the balanced equation, we know that 1 mole of octane reacts with 12.5 moles of oxygen to produce 8 moles of carbon dioxide. Therefore, 0.0605 mol of octane would require 0.0605 mol x 12.5 = 0.75625 mol of oxygen to fully react.
Since we have only 1.32 mol of oxygen, which is in excess compared to the 0.75625 mol required by octane, oxygen is the excess reactant, and octane is the limiting reactant.
Now, we can use the stoichiometry of octane to carbon dioxide to calculate the maximum mass of carbon dioxide produced:
From the balanced equation, we know that 1 mole of octane produces 8 moles of carbon dioxide.
Molar mass of carbon dioxide (CO2) = 44.01 g/mol
Maximum moles of carbon dioxide produced from octane = 0.0605 mol x 8 = 0.484 mol
Maximum mass of carbon dioxide produced from octane = 0.484 mol x 44.01 g/mol = 21.3 g
Remember to round the final answer to 2 significant digits as requested.
Learn more about Octane from the given link
https://brainly.com/question/28469125
#SPJ1
What is true of spontaneous reactions?
O They are indicated by a negative change in Gibbs free energy.
O They have a positive value of AS.
O They are instantaneous.
O They always release heat.
Help 20pts
A flask filled to the 25.0 ml mark contain 29.97 g of a concentrated salt water solution. What is the density of the solution?
A concentrated saltwater solution weighing 29.97 g and fitting into a flask to the mark of 25.0 ml has a density of about 1199.2 g/L.
How is the density of the solution determined?By dividing the solution's mass by its volume, we may get its density: density = mass/volume
We need to know the density of water at the solution's temperature as well as the capacity of the flask up to the 25.0 ml level in order to calculate the volume of the solution.
Since 1 mL = 0.001 L, volume is equal to 25.0 mL, or 0.0250 L.
Now, we may determine the solution's density as follows:
1199.2 g/L or 29.97 g/0.0250 L is what is referred to as density.
To learn more about density visit:
brainly.com/question/26279986
#SPJ9
The two possible units of molarity are
Answer: The units for molarity are moles/liter.
Similarly, the equation to find molarity is moles divided by liters.
Explanation:
mol / L is a unit of molar concentration. These are the number of moles of dissolved material per liter of solution. 1 mol / L is also called 1M or 1molar. Mol / m3 is also a unit of molar concentration.
Molarity is expressed in units of moles per liter (mol / L). This is a very common unit, so it has its own symbol, which is the uppercase M. A solution with a concentration of 5 mmol / l is called a 5 M solution or has a concentration value of 5 mol.
The molar concentration of the solution is equal to the number of moles of the solute divided by the mass of the solvent (kilogram), and the molar concentration of the solution is equal to the number of moles of the solute divided by the volume of the solution (liter). increase.
Consider the reaction described by the chemical equation shown.
C2H4(g)+H2O(l)⟶C2H5OH(l)Δ∘rxn=−44.2 kJ
Use the data from the table of thermodynamic properties to calculate the value of Δ∘rxn
at 25.0 ∘C.
Δ∘rxn= ? J⋅K−1
Calculate Δ∘rxn.
Δ∘rxn= ? kJ
In which direction is the reaction, as written, spontaneous at 25 ∘C
and standard pressure?
reverse
both
neither
forward
The direction of the reaction, as written, spontaneous at 25 ∘C and standard pressure is reverse.
What is the direction of the reaction?
To calculate the value of Δ∘rxn at 25.0 ∘C, we can use the equation:
Δ∘rxn(T2) = Δ∘rxn(T1) + ΔH∘(products) - ΔH∘(reactants)
where;
T2 is the desired temperature (25.0 ∘C), T1 is the standard temperature (usually 25 ∘C), ΔH∘(products) is the enthalpy change of formation of the products, and ΔH∘(reactants) is the enthalpy change of formation of the reactants.Using the data from the table of thermodynamic properties, we can look up the enthalpy change of formation values for C2H4(g), H2O(l), and C2H5OH(l):
ΔH∘f(C2H4(g)) = 52.26 kJ/mol
ΔH∘f(H2O(l)) = -285.83 kJ/mol
ΔH∘f(C2H5OH(l)) = -277.69 kJ/mol
Substituting these values into the equation, we get:
Δ∘rxn(25.0 ∘C) = -44.2 kJ + (-277.69 kJ/mol) - (-52.26 kJ/mol)
Δ∘rxn(25.0 ∘C) = -44.2 kJ - (-277.69 kJ/mol) + 52.26 kJ/mol
Δ∘rxn(25.0 ∘C) = -44.2 kJ + 277.69 kJ/mol + 52.26 kJ/mol
Δ∘rxn(25.0 ∘C) = 233.23 kJ/mol
So the value of Δ∘rxn at 25.0 ∘C is 233.23 kJ/mol.
In which direction is the reaction, as written, spontaneous at 25 ∘C and standard pressure?
Since the value of Δ∘rxn at 25.0 ∘C is positive (233.23 kJ/mol), the reaction as written is not spontaneous at this temperature and standard pressure. The correct answer is "reverse."
Learn more about enthalpy change here: https://brainly.com/question/16387742
#SPJ1
If you started with 20.0 g of a radioisotope and waited for 3 half-lives to pass, then how much would remain? 2.50 g 5.00 g 10.0 g 15.0 g
The amount that would remain, given that 3 half-lives has pass when you started with 20.0 g is 2.50 grams (1st option)
How do i determine the amount that would remain?The following data were obtained from the question:
Original amount of radioisotope (N₀) = 20.0 gramsNumber of half-lives that has passed (n) = 3Amount remaining after 3 half-lives (N) = ?The amount remaining can be obtained as shown below:
N = N₀ / 2ⁿ
N = 20 / 2³
N = 20 / 8
N = 2.50 grams
Thus, we can conclude from the above calculation that the amount that would remain after 3 half-lives to pass is 2.50 grams (1st option)
Learn more about amount remaining:
https://brainly.com/question/28440920
#SPJ1
Answer:
2.50g
Explanation:
why does glass containing an iced beverage feel cold
Answer:
Molecules in the skin are moving faster than molecules in the glass.
Explanation:
Put it in your own words.
Answer:
The energy from the ice transferred to the glass.
Very quick can someone like help me
Answer:
Explanation:
dilute solutions of hydrochloric acid (HCl), sulphuric acid (H₂SO₄), and nitric acid (HNO₃) react with active metals to produce a salt and hydrogen gas.
Active metals react strongly and quickly with other elements and compounds due to the electrons in its structure and its ease of sharing the electrons with other elements.
The most active metals are found in Groups 1 and 2 of the Periodic Table (i.e. the left side), and include lithium, potassium, magnesium, and calcium. Metals such as aluminium, lead, and zinc, are less active than magnesium or calcium, but are generally still labelled as 'active'. Metals such as copper, gold, or silver are inactive and will not react.
Therefore, in the provided question, all the metals listed, except for copper, will produce a metal salt + hydrochloric acid. Copper will not react.
In general:
metal + HCl = metal chloride + H₂ metal + H₂SO₄ = metal sulphate + H₂metal + HNO₃ = metal nitrate + H₂Round to 2 significant
figures.
5,249
5,250. The number was rounded up from 5,249 because the last digit, 9, is greater than or equal to 5.
What is rounded up?Rounding up is a mathematical operation that involves increasing a number to its nearest whole number. It is commonly used when dealing with money, measurements, or statistics. When rounding up, the number is increased to the next highest whole number. For example, if a number is 6.7, it would be rounded up to 7. Rounding up is often used when dealing with exact measurements or estimates to simplify the calculations. It can also be used to make the results of a calculation easier to understand. In the case of money, rounding up can be used to round a number to the nearest dollar. This prevents dealing with fractional amounts of money. Rounding up can also be utilized in statistical analysis, such as in the calculation of mean or median. This simplifies the data and prevents dealing with fractions or decimals.
To learn more about rounded up
https://brainly.com/question/17396482
#SPJ9
What happens when a solid is dissolved into a liquid?
.
2. A student prepared a 0.500 M solution of an unknown acid, and measured the pH as 3.56 at 25°C. (a) What is the acid dissociation constant of this unknown acid? (b) What percentage of acid is ionised in this solution
To solve this problem, we can use the following equation that relates the pH of a solution to the acid dissociation constant (Ka) and the concentration of the acid:
pH = -log[H+]
where [H+] is the concentration of hydrogen ions in the solution.
(a) To find the Ka of the unknown acid, we need to first find the concentration of hydrogen ions in the solution. We can do this by taking the inverse of the pH and converting it to a concentration:
[H+] = 10^(-pH) = 10^(-3.56) = 2.17 × 10^(-4) M
What is the acid dissociation constant of this unknown acid?The acid dissociation constant (Ka) can then be calculated using the equation:
Ka = [H+][A-]/[HA]
where [A-] is the concentration of the conjugate base of the acid and [HA] is the concentration of the undissociated acid. Since we don't know the values of these concentrations, we need to use the fact that the solution is 0.500 M to make an assumption about the degree of dissociation (α) of the acid:
α = [A-]/[HA]
Since the solution is not extremely dilute, we can assume that the degree of dissociation is small and that the concentration of the undissociated acid is approximately equal to the initial concentration of the acid. Therefore, we can write:
[A-] ≈ 0.500α
[HA] ≈ 0.500 - 0.500α
Substituting these expressions into the equation for Ka, we get:
Ka = [H+][A-]/[HA] ≈ ([H+][A-])/0.500α
≈ ([H+]/Ka)(0.500α)/(1-α)
Solving for Ka, we get:
Ka ≈ H+/0.500α
Substituting the values we have calculated, we get:
Ka ≈ (2.17 × 10^(-4))(1-α)/(0.500α) = 4.37 × 10^(-5)
Therefore, the acid dissociation constant of the unknown acid is approximately 4.37 × 10^(-5).
(b) To find the percentage of acid that is ionized in the solution, we can use the equation:
α = [A-]/[HA] = 10^(-pKa + pH)/(1 + 10^(-pKa + pH))
where pKa is the negative logarithm of the acid dissociation constant. Substituting the values we have calculated, we get:
α = 10^(-(-4.36) + 3.56)/(1 + 10^(-(-4.36) + 3.56)) ≈ 0.008
Therefore, the percentage of acid that is ionized in the solution is approximately 0.8%.
Learn more about dissociation constant from
https://brainly.com/question/30930515
#SPJ1
To solve this problem, we can use the following equation that relates the pH of a solution to the acid dissociation constant (Ka) and the concentration of the acid:
pH = -log[H+]
where [H+] is the concentration of hydrogen ions in the solution.
(a) To find the Ka of the unknown acid, we need to first find the concentration of hydrogen ions in the solution. We can do this by taking the inverse of the pH and converting it to a concentration:
[H+] = 10^(-pH) = 10^(-3.56) = 2.17 × 10^(-4) M
What is the acid dissociation constant of this unknown acid?The acid dissociation constant (Ka) can then be calculated using the equation:
Ka = [H+][A-]/[HA]
where [A-] is the concentration of the conjugate base of the acid and [HA] is the concentration of the undissociated acid. Since we don't know the values of these concentrations, we need to use the fact that the solution is 0.500 M to make an assumption about the degree of dissociation (α) of the acid:
α = [A-]/[HA]
Since the solution is not extremely dilute, we can assume that the degree of dissociation is small and that the concentration of the undissociated acid is approximately equal to the initial concentration of the acid. Therefore, we can write:
[A-] ≈ 0.500α
[HA] ≈ 0.500 - 0.500α
Substituting these expressions into the equation for Ka, we get:
Ka = [H+][A-]/[HA] ≈ ([H+][A-])/0.500α
≈ ([H+]/Ka)(0.500α)/(1-α)
Solving for Ka, we get:
Ka ≈ H+/0.500α
Substituting the values we have calculated, we get:
Ka ≈ (2.17 × 10^(-4))(1-α)/(0.500α) = 4.37 × 10^(-5)
Therefore, the acid dissociation constant of the unknown acid is approximately 4.37 × 10^(-5).
(b) To find the percentage of acid that is ionized in the solution, we can use the equation:
α = [A-]/[HA] = 10^(-pKa + pH)/(1 + 10^(-pKa + pH))
where pKa is the negative logarithm of the acid dissociation constant. Substituting the values we have calculated, we get:
α = 10^(-(-4.36) + 3.56)/(1 + 10^(-(-4.36) + 3.56)) ≈ 0.008
Therefore, the percentage of acid that is ionized in the solution is approximately 0.8%.
Learn more about dissociation constant from
brainly.com/question/30930515
#SPJ1
Please help me
Define acid.
Mention four products of destructive distillation of coal.
In a tabular, highlight two differences between diamond and graphite.
List four types of salt.
Outline two physical properties of a base.
CaCO3 + 2HCI =CaCl2 + H₂O + CO2
5. Calcium carbonate (CaCO3) combines with HCl to produce calcium chloride (CaCl₂),
water, and carbon dioxide gas (CO₂). How many grams of HCI are required to react with
6.35 mol CaCO3?
463.5 grams of HCl are required to react with 6.35 moles of CaCO₃.
What is meant by molar mass?Mass of one mole of substance is referred to as the molar mass. The molar mass of a substance can be calculated by adding up the atomic masses of all the atoms in a molecule.
Balanced chemical equation for the reaction between calcium carbonate (CaCO₃) and hydrochloric acid (HCl) is: CaCO₃ + 2HCl → CaCl₂ + H₂O + CO₂
6.35 mol CaCO₃ * 2 mol HCl / 1 mol CaCO₃ = 12.7 mol HCl
Now, we use the molar mass of HCl (36.46 g/mol) to convert from moles to grams: 12.7 mol HCl * 36.46 g/mol = 463.5 g HCl
Therefore, 463.5 grams of HCl are required to react with 6.35 moles of CaCO₃.
To know more about molar mass, refer
https://brainly.com/question/837939
#SPJ1
A student mixes 100. mL of 0.25 M HCl(aq) with 200. mL of 0.50 M HClO4(aq) and then dilutes the mixture with distilled water to a total volume of 500. mL. The [H3O+] in the final solution is closest to
(A) 0.0025 M
(B) 0.12 M
(C) 0.25 M
(D) 0.75 M
Answer:
The answer is B: 0.0025 M
According to molar concentration and dilution concept, the [H₃O+] in the final solution is closest to 0.05 M.
What is molar concentration?Molar concentration is defined as a measure by which concentration of chemical substances present in a solution are determined. It is defined in particular reference to solute concentration in a solution . Most commonly used unit for molar concentration is moles/liter.
The molar concentration depends on change in volume of the solution which is mainly due to thermal expansion. Molar concentration is calculated by the formula, molar concentration=mass/ molar mass ×1/volume of solution in liters.
In terms of moles, it's formula is given as molar concentration= number of moles /volume of solution in liters.In case of 2 solutions concentrated and diluted it is calculated as, M₁V₁=M₂V₂ substitution gives M₂=0.25×100/500=0.05
Learn more about molar concentration,here:
https://brainly.com/question/15532279
#SPJ2
40 grams of KCl are dissolved in 100 mL of water at 45C.
How many additional grams of
KCI are needed to make the solution saturated at 80 C?
40 grams of KCl are dissolved in 100 mL of water at 45C. 5g of additional grams of KCI are needed to make the solution saturated at 80 C as the solubility of KCl is 45g/ml
A uniform combination of a number of solutes within a solvent is referred to as a solution. One frequent illustration of a Solution is adding sugar cubes into your cup of tea and coffee. Solubility is the quality that makes sugar molecules more soluble.
In water, potassium chloride (KCl) dissolves. Its water solubility, like that of all other solutes, depends on temperature. The solubility of a salt increases as the solvent's temperature rises. This is fairly simple to experience with sugar. 40 grams of KCl are dissolved in 100 mL of water at 45C. 5g of additional grams of KCI are needed to make the solution saturated at 80 C as the solubility of KCl is 45g/ml.
To know more about solubility, here:
https://brainly.com/question/29661360
#SPJ1
Question 4 of 10
Based on information from the periodic table, what does this image
represent?
= 9 Protons
= 10 Neutrons
= 10 Electrons
A.Neutral fluorine
B. A positively charged fluoride ion
C. A negatively charged fluoride ion
D. A neutral neon atom
A 2.6 mol sample of N2 is held in a 4191 mL balloon at 89.9 atm. What temperature (in Celcius) is the gas at? Answer to one decimal place.
To convert to Celsius, we subtract 273.15 from the Kelvin temperature, giving us a final answer of 42.1°C.
What is temperature?Temperature is a physical quantity that measures the average kinetic energy of the particles in a system. It is an important parameter for understanding the behavior of matter and the underlying physical processes at work. Temperature is measured in units such as degrees Celsius (°C), Fahrenheit (°F), Kelvin (K), or Rankine (°R). Temperature affects the rate at which chemical reactions occur and the movement of particles in solids, liquids, and gases.
The ideal gas law states that PV = nRT,
where n is the number of moles,
P is the pressure,
V is the volume, R is the ideal gas constant (8.314 J/molK), and
T is the temperature in Kelvin.
Rearranging the equation, we get T = (PV)/(nR).
Plugging in our values, we get T = (89.9 atm * 4191 mL)/(2.6 mol * 8.314 J/molK) = 115.2 K.
To convert to Celsius, we subtract 273.15 from the Kelvin temperature, giving us a final answer of 42.1°C.
To learn more about temperature
https://brainly.com/question/27988898
#SPJ1
48 grams of MgCl2 is dissolved in 500g of water, DENSITY OF
WATER = 1 kg/1L. What is the MOLALITY of this solution? Please
show your steps.
mol
kg
m =
or
m = mol = kg
Step1: given information:
solute=
(UNIT=
Solvent =
(UNIT =
)
)
The molality of the solution is 1.080 mol/kg of a 48 grams of MgCl2 is dissolved in 500g of water, density of water = 1 kg/1L.
How to calculate molality?Taking the moles of solute and dividing it by the kilograms of solvent yields the molality of a solution.
Molality is calculated as follows: kg of solvent/kg of solute
500 g, or 0.500 kg, is the mass of the solvent.
MgCl2 molecular weight divided by its mass gives the amount of moles.
48 g / 95.2 g m o l 1 equals the quantity of moles of magnesium chloride.
0.504 moles of MgCl2 are present in one mole.
Molality is calculated as 0.504moles per kilogram.
Molality is equal to 1.080 mol k g 1.
As stated in the definition, molality is the "total moles of a solute contained in a kilogram of a solvent." The terms "molality" and "molal concentration" are synonymous. It is a measurement of a solvent.
For more information on molality kindly visit to
https://brainly.com/question/26921570
#SPJ1
Determine how many grams (g) of carbohydrate are in a sandwich that
contains 475 total Calories, 10 g of fat, and 25 g of protein.
The sandwich contains approximately 71.25 grams of carbohydrates.
What do you understand by the term calories?Calories are a unit of measurement used to quantify the amount of energy contained in food and beverages. The number of calories in a particular food is determined by the amounts of carbohydrates, fats, proteins, and other nutrients it contains.
To determine the number of grams of carbohydrates in the sandwich, we need to use the fact that carbohydrates, fats, and proteins have different calorie densities. Specifically, carbohydrates and proteins each contain about 4 calories per gram, while fats contain about 9 calories per gram.
First, let's calculate the total number of calories coming from the fat and protein in the sandwich:
Total calories = calories from carbohydrates + calories from fat + calories from protein
475 Calories = calories from carbohydrates + 10g x 9 Calories/g + 25g x 4 Calories/g
475 Calories = calories from carbohydrates + 90 Calories + 100 Calories
475 Calories - 190 Calories = calories from carbohydrates
285 Calories = calories from carbohydrates
Now that we know the number of calories from carbohydrates, we can use the calorie density of carbohydrates to determine the number of grams of carbohydrates:
285 Calories = carbohydrates in grams x 4 Calories/g
71.25 g = carbohydrates in grams
Therefore, the sandwich contains approximately 71.25 grams of carbohydrates.
Learn more about calories here:
https://brainly.com/question/22374134
#SPJ9
The calcium and magnesium in a urine sample were precipitated as oxalates. A mixed precipitate of calcium oxalate (CaC2O4) and magnesium oxalate (MgC2O4) resulted and was analysed by gravimetry. The formed precipitate mixture was heated to form calcium carbonate (CaCO3) and magnesium oxide (MgO) with a total mass of 0.0433 g. The solid precipitate mixture was ignited to form CaO and MgO, the resulting solid after ignition weighed 0.0285 g. What was the mass of calcium in the original sample? All answers should be reported with the correct significant figures
The mass of calcium in the original urine sample would be 0.0140 g.
Stoichiometric problemFirst, we need to find the masses of calcium and magnesium oxalates in the original sample. Let x be the mass of calcium oxalate and y be the mass of magnesium oxalate. Then we have:
x + y = mass of the mixed oxalate precipitate
Next, we need to use the information given to find the mass of calcium in the original sample. The mass of calcium oxide formed after ignition is equal to the mass of calcium oxalate in the original sample. We can calculate the mass of calcium oxide using the mass of calcium carbonate formed and the molar mass ratio of calcium carbonate to calcium oxide.
The balanced chemical equations for the reactions are:
CaC2O4 -> CaCO3 + CO2
CaCO3 -> CaO + CO2
The molar mass of CaCO3 is 100.09 g/mol, and the molar mass of CaO is 56.08 g/mol.
From the given information, we have:
0.0433 g = (x + y)(100.09 g/mol + 80.15 g/mol) / (128.10 g/mol + 80.15 g/mol)
0.0285 g = x(56.08 g/mol) + y(40.31 g/mol)
Solving these equations simultaneously, we get:
x = 0.0140 g
y = 0.0053 g
Therefore, the mass of calcium in the original sample (which is equal to the mass of calcium oxide formed after ignition) is:
0.0140 g
So the mass of calcium in the original sample is 0.0140 g.
More on stoichiometric problems can be found here: https://brainly.com/question/29775083
#SPJ1
Draw both enantiomers of the following compound
Enantiomers rotate the plane of polarized light in opposite directions, and this property is used to distinguish between them in a process called optical rotation.
What are the enantiomers of a compound?Enantiomers are pairs of molecules that are non-superimposable mirror images of each other.
They are isomers, meaning they have the same molecular formula and connectivity but differ in their three-dimensional arrangement of atoms in space.
Enantiomers exhibit identical physical and chemical properties, except for their interaction with plane-polarized light (a type of light that oscillates in a single plane).
Learm= more about enantiomers at: https://brainly.com/question/30216513
#SPJ1
If the salt created from the reaction of a strong acid and a weak base is added to a solution, what will happen to the solution? A. The pH will decrease. B. The pH will increase. C. The pH will stay the same. D. More OH- ions will form. E. The H3O+ ions will decrease.
HELP ASAP
Which of the following represents beta decay
OA. Tc-TC+y
O B.
B. 14Gd→ 144Sm+ He
O C. 160Eu+e→ 169 Sm
62
O D.
D.
63
164Gd→ ¹6 Tb + e
160
65
The correct answer that represents beta decay is
D. 164Gd → 164Tb + e, What happens in beta decayIn beta decay, a neutron in the nucleus is converted into a proton, and an electron (or beta particle) and an antineutrino are emitted from the nucleus.
In this case, a neutron in the 164Gd nucleus is converted into a proton, and an electron is emitted from the nucleus, resulting in the production of 164Tb.
Option A is not a valid representation of any known type of radioactive decay.
Option B represents alpha decay, in which an alpha particle is emitted from the nucleus.
Option C represents electron capture, in which an electron is captured by the nucleus.
Learn more about beta decay at
https://brainly.com/question/27770519
#SPJ1
2AI + 6HCI=2AlCl3 + 3H₂
3. Aluminum reacts with HCI to produce aluminum chloride (AICI3) and hydrogen gas (H₂).
Calculate the number of moles of HCI required to react with 0.62 moles of Al.
3.0 moles of [tex]Al[/tex] can fully react with hydrogen chloride to produce 4.5 moles of [tex]H_{2}[/tex]. Thus, 0.93 moles will be produced by 0.62 moles of [tex]Al[/tex].
STOICHIOMETRYBased on this inquiry, how does aluminum react with hydrogen chloride to produce aluminum chloride and hydrogen gas[tex]Al +6HCl= AlCl_{3} +3H_{2}[/tex]According to this equation, 3 moles of hydrogen gas are produced during the reaction of 2 moles of aluminum ([tex]Al[/tex]).As a result, 3 moles of aluminum will result in 3 3 2 = 4.5 moles of hydrogen gas.As a result, the entire reaction of 3.0 moles of [tex]Al[/tex]with hydrogen chloride can produce 4.5 moles of [tex]H_{2}[/tex].The proportion of reactants to products before, during, and after chemical processes is known as stoichiometry.For more information on stoichiometry kindly visit to
https://brainly.com/question/19484482
#SPJ1
A 1.5 L sample of a 0.44 M H Br solution is mixed with 2.2 L of a 0.080 M HCIO4 solution. What is the pH of the mixture?
The oxides SO2 and N2O5 will form what acids?
At 25 ∘C
, the equilibrium partial pressures for the reaction
A(g)+2B(g)↽−−⇀C(g)+D(g)
were found to be A=5.63
atm, B=5.00
atm, C=5.47
atm, and D=5.63
atm.
What is the standard change in Gibbs free energy of this reaction at 25 ∘C
?
The standard change in Gibbs free energy of the reaction at 25 ∘C is -1.69 kJ/mol.
What is standard change?
To find the standard change in Gibbs free energy of the reaction, we need to use the following equation:
ΔG° = -RT ln(K)
where ΔG° is the standard change in Gibbs free energy, R is the gas constant (8.314 J/mol·K), T is the temperature in Kelvin (25 °C = 298 K), and K is the equilibrium constant.
To find K, we need to use the equilibrium partial pressures:
K = (PC × PD) / (PA × PB²)
where PA, PB, PC, and PD are the equilibrium partial pressures of A, B, C, and D, respectively.
Substituting the values, we get:
K = (5.47 atm × 5.63 atm) / (5.63 atm × (5.00 atm)²)
K = 0.6176
Now we can calculate the standard change in Gibbs free energy:
ΔG° = -RT ln(K)
ΔG° = -(8.314 J/mol·K) × (298 K) × ln(0.6176)
ΔG° = -1,690 J/mol or -1.69 kJ/mol
Therefore, the standard change in Gibbs free energy of the reaction at 25 ∘C is -1.69 kJ/mol.
What is free energy?
Free energy, also known as Gibbs free energy, is a thermodynamic quantity that represents the amount of energy in a system that is available to do work at a constant temperature and pressure. It is denoted by the symbol G and is expressed in units of joules (J) or calories (cal).
In simple terms, free energy is the energy that can be used to do work. It is defined by the equation:
ΔG = ΔH - TΔS
where ΔH is the change in enthalpy (heat content) of the system, ΔS is the change in entropy (disorder) of the system, and T is the absolute temperature in Kelvin.
If ΔG is negative, the reaction is spontaneous and can proceed without the input of external energy. If ΔG is positive, the reaction is non-spontaneous and requires energy input to proceed. If ΔG is zero, the system is at equilibrium.
To know more about free energy, visit:
https://brainly.com/question/14150518
#SPJ1