Answer the following - show your work! (5 marks): Maximum bending moment: A simply supported rectangular beam that is 3000 mm long supports a point load (P) of 5000 N at midspan (center). Assume that the dimensions of the beams are as follows: b= 127 mm and h = 254 mm, d=254mm. What is the maximum bending moment developed in the beam? What is the overall stress? f = Mmax (h/2)/bd3/12 Mmax = PL/4

Answers

Answer 1

The maximum bending moment developed in the beam is 3750000 N-mm. The overall stress is 4.84 MPa.

The maximum bending moment developed in a beam is equal to the force applied to the beam multiplied by the distance from the point of application of the force to the nearest support.

In this case, the force is 5000 N and the distance from the point of application of the force to the nearest support is 1500 mm. Therefore, the maximum bending moment is:

Mmax = PL/4 = 5000 N * 1500 mm / 4 = 3750000 N-mm

The overall stress is equal to the maximum bending moment divided by the moment of inertia of the beam cross-section. The moment of inertia of the beam cross-section is calculated using the following formula:

I = b * h^3 / 12

where:

b is the width of the beam in mm

h is the height of the beam in mm

In this case, the width of the beam is 127 mm and the height of the beam is 254 mm. Therefore, the moment of inertia is:

I = 127 mm * 254 mm^3 / 12 = 4562517 mm^4

Plugging in the known values, we get the following overall stress:

f = Mmax (h/2) / I = 3750000 N-mm * (254 mm / 2) / 4562517 mm^4 = 4.84 MPa

To learn more about bending moment click here: brainly.com/question/31862370

#SPJ11

Related Questions

An RLC series circuit has a 1.00 kΩ resistor, a 130 mH
inductor, and a 25.0 nF capacitor.
(a)
Find the circuit's impedance (in Ω) at 490 Hz.
Ω
(b)
Find the circuit's impedance (in Ω) at 7.50 k

Answers

An RLC series circuit has a 1.00 kΩ resistor, a 130 mH inductor, and a 25.0 nF capacitor.(a)The circuit's impedance at 490 Hz is approximately 1013.53 Ω.(b)The circuit's impedance at 7.50 kHz is approximately 6137.02 Ω.

(a) To find the circuit's impedance at 490 Hz, we can use the formula:

Z = √(R^2 + (XL - XC)^2)

where Z is the impedance, R is the resistance, XL is the inductive reactance, and XC is the capacitive reactance.

Given:

R = 1.00 kΩ = 1000 Ω

L = 130 mH = 0.130 H

C = 25.0 nF = 25.0 × 10^(-9) F

f = 490 Hz

First, we need to calculate the inductive reactance (XL) and capacitive reactance (XC):

XL = 2πfL

= 2π × 490 × 0.130

≈ 402.12 Ω

XC = 1 / (2πfC)

= 1 / (2π × 490 × 25.0 × 10^(-9))

≈ 129.01 Ω

Now we can calculate the impedance:

Z = √(R^2 + (XL - XC)^2)

= √((1000)^2 + (402.12 - 129.01)^2)

≈ √(1000000 + 27325.92)

≈ √1027325.92

≈ 1013.53 Ω

Therefore, the circuit's impedance at 490 Hz is approximately 1013.53 Ω.

(b) To find the circuit's impedance at 7.50 kHz, we can use the same formula as before:

Z = √(R^2 + (XL - XC)^2)

Given:

f = 7.50 kHz = 7500 Hz

First, we need to calculate the inductive reactance (XL) and capacitive reactance (XC) at this frequency:

XL = 2πfL

= 2π × 7500 × 0.130

≈ 6069.08 Ω

XC = 1 / (2πfC)

= 1 / (2π × 7500 × 25.0 × 10^(-9))

≈ 212.13 Ω

Now we can calculate the impedance:

Z = √(R^2 + (XL - XC)^2)

= √((1000)^2 + (6069.08 - 212.13)^2)

≈ √(1000000 + 36622867.96)

≈ √37622867.96

≈ 6137.02 Ω

Therefore, the circuit's impedance at 7.50 kHz is approximately 6137.02 Ω.

To learn more about reactance visit: https://brainly.com/question/31369031

#SPJ11

Other Questions

An RLC series circuit has a 1.00 k resistor, a 130 mHinductor, and a 25.0 nF capacitor.(a)Find the circuit's impedance (in ) at 490 Hz.(b)Find the circuit's impedance (in ) at 7.50 k Bearing used in an automotive application is supposed to have a nominal inside diameter 1.5 inches. A random sample of 25 bearings is selected, and the average inside diameter of these bearings is 1.4975 inches. Bearing diameter is known to be normally distributed with standard deviation =0.1 inch. We want to test the following hypothesis at =0.01. H0:=1.5,H1:=1.5 (a) Calculate the type II error if the true mean diameter is 1.55 inches. (b) What sample size would be required to detect a true mean diameter as low as 1.55 inches if you wanted the power of the test to be at least 0.9 ? What advantages can your identify for transmitting electronic claims? Are there any potential disadvantages as well? What specific topic would you use for your informative speech?Who would be your audience? Where, specifically, would youresearch? In class, we learned that the impact of a teratogen depends on the genotype of the individual. Which example best illustrates this:A. Zika is more likely to cause birth defects during some times of pregnancy than during others.B. One drug during pregnancy causes deformed limbs but not low birth weight while the use of a different drug during pregnancy is associated with low birth weight but not deformed limbs.C. the effects of moderate alcohol use while pregnant is not obvious when a child is born, but appears later in the child's life.D. two women who both drank the same amount during pregnancy, but only one of them gave birth to a child with fetal alcohol syndrome and the other gave birth to a healthy child. The antidepressant drugs Prozac, Zoloft, and Paxil are all examples of which of the following? O tricyclics OSSRIs O MAO inhibitors O benzodiazepines A company Charting its profits notices that the relationship between the number of units sold,x, and the profit,P, is a linear. If 170 units sold results in $20 profit and 220 units sold results in $2820 profit, write the profit function for this company. P=Find the marginal profit$ What is Papal Primacy? What affect did this have onrelationships between the church and Western secular governments?Eastern secular governments? Stanford a type of aortic dissection refers toA. De Bakey type IB. De Bakey I and de Bakey IIC. De Bakey IIID. De Bakey II and de Bakey IIIE. De Bakey II When one person shouts at a football game, the sound intensity level at the center of the field is 60.8 dB. When all the people shout together, the intensity level increases to 88.1 dB. Assuming that each person generates the same sound intensity at the center of the field, how many people are at the game? Required information A 35.0-nC charge is placed at the origin and a 57.0 nC charge is placed on the +x-axis, 2.20 cm from the origin. What is the electric potential at a point halfway between these two charges?V = A laser beam is normally incident on a single slit with width 0.630 mm. A diffraction pattern forms on a screen a distance 1.20 m beyond the slit. The width of the central maximum is 2.38 mm. Calculate the wavelength of the light (in nm). for a particle inside 4 2. plot the wave function and energy infinite Square well. who create god? can you tell me? Simple Harmonic Oscillator. For a CO (carbon monoxide) molecule, assume that the system vibrates at o=4.0.1014 [Hz]. a. Wavefunction: Sketch the wave function for the n=5 state of the SHO. Points will be given on qualitative accuracy of the solution. Include a brief description to help me understand critical components of your sketch and label the sketch appropriately. b. Probabilities: Make a qualitatively correct sketch that indicates the probability of finding the state as a function of interatomic separation for n=5 indicate any important features. (Sketch plus 1 sentence). c. Classical turning points: Calculate the probability that the interatomic distance is outside the classically allowed region for the n=1 state Can threats to people's social (i.e. group) identity lead to deviant attitudes and behaviors? Belmi et al. (2015) sought to answer this question. They had 188 self-identified Black American college students and 123 self-identified White American college students complete three sets of self-reported measures. The first set asked whether the student worried about being seen negatively in school because of their ethnicity. The second set asked whether the student felt and expected to be disrespected at school. The final set asked whether the student engaged in delinquent behaviors at school in the past year (e.g. cheating on a test, copying someone else's work, picking a fight, using drugs, etc.). As predicted, the authors found that the more students worried about being seen negatively in school because of their ethnicity, the more likely they were to engage in social deviance, though this relationship occurred only for Black American students. The same finding occurred for the disrespected variable. That is, the more students worried about being seen negatively in school because of their ethnicity, the more likely they felt disrespected. A. Did the study establish covariance (a change in one variable led to a change in the other)? Explain. B. Did the study establish temporal precedence (a change in one variable preceded a change in the other)? Explain. C. Did the study eliminate alternative explanations? Explain. D. Is the study design causal (experimental), correlational, or quasi-experimental? According to your text, in some states in the US, over 20% of the black population cannot vote due to felon disenfranchisement. O True O False *14-39. A 1.219-g sample containing (NH4)2SO4, NH4NO3, and nonreactive substances was diluted to 200 mL in a volumetric flask. A 50.00-mL aliquot was made basic with strong alkali, and the liberated NH3 was distilled into 30.00 mL of 0.08421 M HCI. The excess HCI required 10.17 mL of 0.08802 M NaOH for neutralization. A 25.00-mL aliquot of the sample was made alkaline after the addition of Devarda's alloy, and the NO3- was reduced to NH3. The NH3 from both NH4+ and NO3- was then distilled into 30.00mL ofthe standard acid and back-titrated with 14.16 mL of the base. Calculate the percentage of (NH4)2SO4 and NH4NO3 in the sample. Describe what the term "phased (rolling wave) project planning"means. (14.9) Atom 1 of mass 38.5 u and atom 2 of mass 40.5 u are both singly ionized with a charge of +e. After being introduced into a mass spectrometer (see the figure below) and accelerated from rest through a potential difference V = 8.09 kV, each ion follows a circular path in a uniform magnetic field of magnitude B = 0.680 T. What is the distance x between the points where the ions strike the detector?